No batch split to happen at delivery level.

Hi
I have scenario where material is converted from MT(Metric tons)  to Bag for selling. At delivery level batch determination take place. We dont want batch split to happen at delivery level.
Qty should be picked up from single batch if not sufficient than it should break the qty & pickup the complete qty from the second batch.
Eg: 350 bags = 1015.60 mts- 1st batch stock
         50 bags=  75.60 mts- 2nd batch stock
if the order is of 351 tons that at delivery level it should determined two batches separately & pickup complete from the batch
pls advice.
Rgds
VK

Its a std batch split process.
as per above in example, if the order qtty is 351 TO, then system will determine 2 batches, if in VCH2, number of splits maintained more than 1.
What exactly you are expecting?
*at delivery level it should determined two batches separately & pickup complete from the batch*
pick up complete from the batch - means what. its incomplete.

Similar Messages

  • Batch split not happening during delivery

    Hi Experts,
    I have enough of stock for a material with different batches (with different expiry dates). When I create an order for qty 100, system confirms it on a certain date taking 1st batch nearest to expiry date, as per the search startegy set in the cponfiguration.Please note here that the batch that system picks has got only 50 qty in stock, but it shows whole 100 qty against it. Probably because Batch split is not possible during sales order creation, hence system showing whole qty against one batch.
    Now, when I try to create delivery, it shows only 50 qty of the same batch in delivery document. I select the line item and go to the "Batch split" tab to effect batch split, but system does not allow. It says "Batch already specified for material".Here is the detail for your analysis-
    Batch in item 000010 already specified for material 2000978
    Message no. VL221
    Diagnosis
    The batch was either predefined in the sales order that the delivery is based on or it was assigned to the delivery item manually. Therefore, you can no longer carry out a batch split for the delivery quantity of the items.
    Procedure
    In order to make the batch split possible, you can cancel the assignment of the delivery item to the batch, if the delivery's processing status allows.
    Kindly advise.
    Thanks in advance,
    Randhir

    Thanks Mr. P Gomatheeswaran,
    Now batch is not being determined during sales order creation, that's fine.While creating delivery,when I select line item and go to Batch split tab I can see batches being split in two, which is OK. But when I try to put Picking quantity as delivery qty, system says "Picked quantity is larger than the qty to be delivered".(Message no. VL019).
    Also Storage location field is grayed out.
    Regards,
    Randhir

  • No Single batch split item created in delivery during picking

    Hello,
    When there is only one batch split item, SD_DELIVERY_UPDATE_PICKING is not creating batch split item (90001) if delivery quantity is equal or less than picking quantity...I didi search for SAP Note (1360407) and found one which is applicable only to P3A Component.
    Instead of batch split it updates at item level itself. Now if again i post an IDOC with 2 batch split, then it adds both picking quantity and update the same line item itself.
    This is much worse. Any one faced this issue before???
    Thanks to update me
    Regards
    Hari

    When the batch is the same, regardless of the number of times the same batch is picked, the update to the delivery will be to the same header line item. The batch split (delivery line split with parent and child line items) will occur only when there are multiple batches picked against the same header line item. Since this behavior is standard SAP I'm doubtful that this can be changed via an exit or BADI (I couldn't find one to influcence this).

  • Maximum Batch Splits allowed in Replenishment Delivery

    Hello Experts,
    i have a question regarding the number of batch splits allowed in replenishment delivery. Currently , I can only post  250 batches in replenishment delivery.
    Is it possible to increase this number?
    Thanks
    DG

    Hi,
    The limit can be customized in Batch Search Strategy Type under following SPRO path:
    IMG -> Logistics - General -> Batch Management -> Batch Determination and Batch Check -> Strategy Types -> Define Inventory Management Strategy Types
    Check setting No. of splits.
    Regards,
    Marcin

  • Automatic Batch Determination Not Happening In Delivery

    Hi Experts
    Please note that we are using forecast schedule in sch. agreements for delivery and one is supplied to multiple customers so there are multiple scheduling agreements for a single item.
    In this case when we are doing outbound delivery automatic batch dermination is not happening. And if I tried to do batch split in delivery is not working.
    Can u help me in this.
    Regards,
    Hitesh

    hiteshks79 ,
    In that case
    For Batch Split you need to maintain  Batch split Item Category - CHSP
    Try to maintain Delivery Item category determination IMG u2013-> LE --> Shipping --> Deliveries --> Define Item Category determination in deliveriesu201C as
    LF(Delivery Dcoument Type) --> NORM (item category Group) --> CHSP(Usage) = TAN
    CHSP - Batch split (Maintain it for your delivery document type)
    2. TAN item category has to be activated for Automatic Batch determination
    path IMG --> LG --> Batch Determination and Batch Check --> Batch Search Procedureallocation and Check Activation --> Activate Automatic Batch determination in SD --> Activate Automatic Batch determination for sales order items
    Activate indicators for TAN item category (Maintain it for your Item Category)
    3. Allocate automatic Serach procedure/ Activate check
    path IMG --> LG --> Batch Determination and Batch Check --> Activate Automatic Batch determination in SD --> Activate Automatic Batch determination for Delivery item categories
    Enter your sales area + sales document type +search procedure + Activate u201CCheck Batchu201D indicatoru201D
    Activate indicators for delivery item category - TAN
    Regards
    Sathya

  • Serial number assignment to batch split position in outbound delivery

    Hello All,
    I have a question for which I can't find any answer even though I have been struggling through several forums, etc. Let me explain it:
    I create a outbound delivery for material XYZ which is batch managed and serial number managed. An automatic batch determination takes place. Thus a batch split is created for the main item 10. Since the serial number is required, I enter the serial number for the batch split position 900001. Press enter and save.
    The problem is, that afterwards the batch split positions aren't shown in the Batch split screen using transaction VL02N (the batch split positions and also the serial number can be displayed via VL03N). The issue is that the serial number entered cannot be removed nor the batch split can be changed anymore.
    Message VL429: Batch/Val.type split only possible if no serial numbers are maintained.
    It seems to be a standard SAP functionality, but a little bit tricky. Can anybody help me?
    1. How can I remove the serial number assignment for a batch split position?
    2. Is there any customizing setting with which I could perhaps deactivate the check?
    Thanks a lot in advance. Any input is appreciatted!

    Hi,
    issue has been solved at last. The batch split indicator can be used to display the batch structure of an item. And here the serial number can be removed as well.

  • Item condition repeating in Invoice for Batch split items-V  Urgent

    Hi Guys,
    My Sales order has one line item
    One Item condition is there in the pricing procedure, it brings the value as the relevant condition record is existing.
    Batch split is happening in delivery and because of which the order item is splitting into two lines, the main item is showing the quantity as zero, and the batch split item is holding the entire quantity in the delivery document..
    When this delivery is converting into billing, the invoice is showing two lines, and is bringing the condition both for the main item (zero quantity), and for the batch split item (with full quantity).
    Now because of this the customer is being charged twice by way of this condition type which is repeating in both the line items.
    Ideally, for the main item which has the quantity as zero, this condition should not come. It should rather appear for the item which holds the full quantity.
    How can correct this, pls let me know.
    Many Thanks,
    Regards,
    Vivek

    summarize the batch split into the main item: use Billing quantity flag = G in copy control tcode VTFL.
    Roberto

  • Create a Batch split for inbound delivery using IDOC

    Hi,
    I have an requirement to create Batch splits in the Inbound delivery.
    These Inbound deliveries are created using IDOC.
    So when the inbound deliveries are created through IDOC the Batch split is not happening.
    How can i achieve this through Coding?
    Any pointers on this will be highly appreciated.

    Hi ,
    Try this link.
    http://wiki.sdn.sap.com/wiki/display/ABAP/Toapplybatchsplitinanoutbound+delivery
    Regards
    HM

  • Batches are not coming in invoice where there is batch split in delivery

    Hi all,
    Batch split quantity as per delivery is not coming in billing document.
    Ex
    1). Sales order created with Material "A" - 50 Kgs
    2). Delevery is created
    Material A - 10Kgs - Batch 1
    Materail A- 15KGs - Batch 2
    Material A - 10Kgs - Batch 3
    3). iNVOICE IS CREATED For cumulative quantitiy in single line like
    Material -A -25 KGS - Rs.10,000
    it's conderind other two lines for batch split quantities with 0' quantities and 0 values
    Please advise what should be done if i need to create invoice --
    Material A - 10Kgs - Rs.2000
    Materail A- 15KGs - Rs.4000
    Material A - 10Kgs -Rs.2000
    I.e. An invoice should be created with batch split quantities.
    And when i create a return order with the reference of this invoice it should take all the respective batches as per batch split.
    Please advise.

    hI,
    Go to vtlf  copy controls in item data  vbrk/vbrp give 001  try this it my work out.
    Best regards,
    venkataswamy.y

  • Issue with BATCH SPLIT with Inbound Delivery

    Hi,
    We are in an SAP upgrade project from 4.7 to ECC 6.0, we would require to develop an Interface Program to perform BATCH SPLIT for an Inbound Delivery, I tried with BAPI BAPI_INB_DELIVERY_CHANGE but it seems to be work only to change the existing line items, by requirement is to create new BATCH SPLIT for a given inbound delivery, can anyone help me in finding the appropriate BAPIs, thanks in advance.
    Regards
    Bala

    Hi Bala,
    Have you tried BAPI_INB_DELIVERY_CONFIRM_DEC? If you check the documentation of this BAPI, at the bottom of it there's a statement:
    If you report back batch splits that were created in the ERP system, you cannot fill the hierarchy fields HIERARITEM and USEHIERITM.
    If you created split items in the WM system and have reported back, these two hierarchy fields must contain information.
    BR
    Raf

  • Gross Wt & Net Wt not copied from delivery to invoice in batch split

    Hi Frnds,
    We are appling a manual Header Frieght condition Type (HD00) to a delivery with batch split.
    In the delivery this value(HD00) is splitted between line items based on Gross weight. But when we create the invoice for this delivery, the batch split line items do not have gross weight and net weight, and thus there is no value for HD00 in invoice.
    Please provide us any pointers if you have encountered any such issue...
    Many thanks in advance...
    Regards,
    Karthick C

    Hi Karthick
    This is expected in case of Batch split scenario, because in the sales order there is no batch split and in delivery there is batch split.
    You create invoice w.r. to delivery, But in copy control, you have  mentioned the price source as Order only.
    Also the child items in the batch split are not relevant for billing and hence , if you see the item category of the child item in VOV7, u can see that it is not relevant for billing. Hence the value of the invoice having the line items alone will also be zero.
    However the parent item will have gross weight and net weight in the screen.
    If you maintain the price source as Order and Delivery, there is a possibility that you can get HD00 in invoice.The billing quantity in this case in copy control shoudl be either G or H. Based on this value, you can get either one invoice for both parent and child items or two different invoices one for parent and another for child items.

  • BAPI for Inbound Delivery Batch Split

    Hello Friends,
      I need any BAPI/BADI to assign batch split items to inbound delivery.  In out scenario, we generate transfer posting in MIGO with split batches and during inbound delivery generation in background, system generates seperate line items instead batch split items.  Now we need any BAPI/BADI to assign the batch split items during inbound delivery creation/change.
    Appreciate your support
    Best Regards,
    Goutham

    Hi Goutham,
    Please trt to use the BADI LE_SHP_DELIVERY_PROC - methods FILL_DELIVERY_ITEM and CHANGE_DELIVERY_ITEM when VB_CREATE_BATCH is called.
    As per note 317531 it is not possible to create bacthes in an SAP standard system via VL31N. There's no update on table MCHA even if you enter a new batch in the inbound delivery.
    I hope this information helps you.
    Kind regards,
    Fábio Almeida
    MM Consultant

  • Split at sales order item level

    Hi SD gurus...
    Iam trying batch determination at sales order item.
    I could get every thing except batch split/ Even though required split are maintained in batch search record, it is getting as 001 only at the time of determination during sales order.
    I think this is a standard phenomena. is there any work arround possible to get the required batch split at sales order item level.
    warm regards
    sairam akundi

    Hi Sairam,
    Contrary to deliveries, batch splits are not possible for sales orders (as opposed to delivery). Even if you have defined a certain number of batch splits in the batch search strategy, the system overrides this default setting.
    Maybe you can explore USEREXIT_MOVE_FIELD_TO_KOMPH

  • Batch split concept in SD

    Hi Experts,
    Could any body brief the significance of batch split concept in SD delivery, reference to below?
    1)Customer master: Batch split allowed indicator has no affect.(even OSS 31148 confirms the same.) Whatu2019s the use then?
    2) batch search strategy of customer/material -T code : VCH1, control data screen-
       Whatu2019s the significance of field batch split/no. of batch splits?
    Is there any relation between above two points?
    Further, its noticed that irrespective of no. of batch splits mentioned (as per point 2), we can very well deliver more batches to the customer. Hence this is also not having any significance?
    Please elaborate on above,
    Kiran.T

    T KIRAN ,
    Batch Split concept in SD delivery:
    1. This Concept is used when you store materials in Batch Format or Produce materials in Batch Format and store it in Storage Location.
    2. In that case when you do a delivery you will have to use the Batches from the storage location
    3. For Ex: you have to Deliver Product A  250 Qty and you have batches activated for the material. you are producing 200 qty of material per batch. In that case for the above delivery you will have to use two batches.
    4. In That case what we will do we will choose the material to be delivered and click Batch split icon against the material
    5. For Product A - 250 Qty  we will assign Batch 1-200qty
                                                         and Batch 2 - 50 qty.
    Batch split helps us or Facilitates us to meet the delivery requirement, by choosing material from different batches.
    Now Coming to your question.
    batch search strategy of customer/material -T code : VCH1, control data screen-
    Whatu2019s the significance of field batch split/no. of batch splits?
    It is to enable no of Batch Splits thaty you want during delivery level pertaining to material and customer That no of batch splits we enter here as 2,3,4 as per your requirement in VCH1.
    Regards
    Sathya

  • Cost in Batch splits items

    HI
    I have an issue where the cost(VPRS) of the main item is not getting updated/Displayed in billing document.
    The batch splits is done at delivery document and the main item is displayed without cost in billing document
    Regards
    Ramesh

    Hi
    Any updates??????
    Regards
    Ramesh

Maybe you are looking for