No beep or vibrate when charger is pluged in

Why dose my iphone not beep or vibrate no more when i plug in the charger it still charges though

It should vibrate, it makes a little beep,  but you should check your volume buttons! good luck!

Similar Messages

  • Why there's no beep sound alert when charging my iphone5 from totally drained battery?

    Why there's no beep sound alert when charging my iphone5 from totally drained battery?

    Thanks for your reply. But there's still no beep sound alert when it start to charge?

  • Black screen but vibrates when charging

    I knocked my phone on the table and now the screen is black but it continues to vibrate when I have it plugged into my charger - HELP

    You'll need to reload the OS software to the phone.
    http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
    The post specifies the Storm model in particular, but the process is the same for any BB device.
    Disclaimer: I'm just a regular user like the rest of you. I have spent a lot of time learning the limitations of the Blackberries to know how to fix most problems. If I have suggested a fix, please give a kudo and mark as a solution!

  • Turn off vibration when charging

    I have my phone with no vibration and on mute, yet it vibrates whenever I plug it in to charge. How can I remove this?
    Thanks

    As far as I know, you can't, it is a feature to confirm the connection between the phone and the charger. It will only stop vibrating when you switch off the mute button, but this will give you the connection sound back instead.

  • Strange vibration when charging...

    My ipod nano has begun to vibrate when I'm charging it at the wall socket. Is this normal? I'm a little worried the battery may explode or something exciting like that. Advice would be appreciated.

    if it is a vibration then you'll feel it if you touch the plastic display
    if you only feel it when touching the metal case it is the leakage current
    it is the charger that causes it, some types of charger do it more, some less

  • My iPad gives off a strange vibration when charging, is this safe?

    I charge my iPad 3 almost daily, and when I use it while charging I feel a slight vibration coming from it. I wasn't too concerned until I noticed that if I touch my partner while using it, I can feel the same vibration. Is this normal? It's worrying me!

    Not normal. Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

  • My iPhone 4S won't turn on and continues to vibrate when charging

    My iPhone 4S will not start and when i charge it, it continues to vibrate. I don't know what to do.. Any ideas??

    Sorry, but we can't help you with problems occurring after you have opened and tried to fix some hardware of the phone, due to the Terms of Use of these discussions.
    The warranty for the phone is gone now and Apple will not service the phone either anymore. You'll have to look for a 3rd party repair center to get that fixed.

  • Using US Mac Pro in EU, computer vibrates when charging. Is this normal or should I be concerned?

    I've used other macbooks when traveling in Europe (specifically Italy) in the past with no issues. I have a new (or new-ish OSX 10.7.4) macbook pro. This time when I plug it into charge the whole laptop vibrates. I know that the computer should be capable of converting the voltage, but I don't want there to be a problem and have it fry my battery or even worse, my memory.

    Could be that they use a different frequency (50 Hz vs. the standard 60 Hz used in the Americas). If so, no biggie as the power brick is universal and can operate from 100 to 240V, 50 to 60 Hz. Just make sure to use a properly grounded outlet and the grounded cable on the power brick instead of the Godawful "duck's bill" adapter.

  • Macbook Pro feel like vibrating when charging

    When I charge my battery and continue to work on my Macbook Pro, the part of the Macbook where you rest the heals of your hands when typing vibrates, it is very fine and feels like the casing is electrostatically charged. Anyone else get this/can explain this? Is this bad for my MBP late 2011?

    Many have reported the same. But none said it was a problem.
    If MBP has 7200 RPM HD, it may produce vibration.
    http://support.apple.com/kb/TS2666
    You can always take the computer to the Apple Store for evaluation.
    Best.

  • Samsung Galaxy S4 won't turn on, and will only vibrate when charging?!

    My Galaxy S4 had a meltdown of sorts.  It suddenly stopped charging and happened when I had 1% battery left.  Once the phone died and I tried keeping it on the charger and everything, it would only vibrate about every three seconds with a pitch black screen, and that was only occasionally.  I did all the obvious things to try.  I also tried plugging the usb charger into my computer; that seemed to help at first with a different result but only gave me the battery symbol on the phone in black and white with the circle in the center not moving and not charging. I tried to do the hard reset and also tried a friends charger and neither worked.  When plugged into the computer, a pop up sometimes comes up and says the device you have plugged in has malfunctioned and cannot be read.
    I am currently out of the country for another 2 months, so finding help for this in a store won't exactly be easy.  Any help will be appreciated greatly!

        booperman13,
    Zoinks! Sorry to hear you are having trouble so far away. It sounds like it was working fine when you first replaced the battery and you had previously done a factory reset. The computer isn't recognizing it and it isn't charging. So, by process of elimination, based on what you have described it sounds like there might be a problem with the USB cable. 
    Since you replaced that battery have you tried another charger? That might give us greatly clarity as to the nature of the problem. As you are currently out of our reach, if it works fine with another charger and you need to replace it, I would reach out to Samsung for assistance with finding a local provider that has their charger or usb cable in their inventory: http://bit.ly/1v0IVFI .
    BrianP_VZW
    Follow Us on Twitter @VZWSupport

  • IPad vibrates when charging

    Hi
    I've noticed that when my iPad is charging in it's dock that the back of the iPad gently vibrates and there is a tingling feeling when touched.  I have found a lot of similar posts across the web but none give a definitive answer.  Does anyone know if this is normal behaviour or is there a problem?
    Many thanks

    Kena1921 wrote:
    Could you expand on the following...
    This sensation may be alleviated by turning the AC plu 180 degrees.
    That is certainly true in the U.S. and other countries with 110VAC.  I have two 110VAC lines coming from the power company.  Each one is 110VAC relate to earth ground.  They're phased 180 degrees apart and there is 220V between them.  In my house, earth ground is obtained by a connection to the cold water pipe on the feed side of the meter.  Also, a "Neutral" is created by a connection to ground.  Although they are carried on separate physical wires, Ground and Neutral are electrically identical.
    "Normal" appliances and receptacles utilize the 110VAC line and the Neutral line.  The ground wire is carried as a safety mechanism in case the Neutral breaks.  (Otherwise, the human might provide a path to ground, which is unpleasant, at best.)  Heavy duty appliances (such as electrical clothes dryers) utilize both 110VAC lines and no Neutral and operate at 220VAC.  The Ground is still present for safety.
    SOME 110VAC devices have plugs that include a third prong for Ground.  These plugs can not be reversed 180 degrees.  SOME 110VAC devices have plugs that do not have the third prong but are mechanically polarized (one prong is wider than the other).  These plugs also can not be reversed.  The Apple charger does not have a Ground prong and does not have a polarized plug and therefore can be reversed.
    Turning the plug 180 degrees changes which wire inside the charger is connected to Neutral and therefore to Ground and that frequently eliminates what we refer to as "60 cycle hum" (in the old days, Hz was known as cycles/second).
    By the way, my reference to "110V/220V" is the result of common usage where I grew up.  Others call it 115V/230V or even 120V/240V.  The actual values could be anything in that range.
    Now, can anyone educate me regarding the wiring Europe?

  • My xperia z1 does not turn on ! it keeps vibrating when charging and gives red light !

    yesterday i used for the first time my xperia z1 underwater to take  pictures in the pool . every thing was good until i get out from the water . it suddenly gives black screen . i left the phone for 3 hours without using it . i decided to recharge it . It vibrates and gives red light contiously . i want to know if my phone and  my money are gone !!  

    It's almost impossible to answer that question as it has to be checked up, just take it in
    http://www.sonymobile.com/global-en/support/contact-us/
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Why does iPhone beep when charging

    My iPhone continues to beep when charging....can anyone tell me how to stop the beeping

    When you say "beep" you mean the sound it makes right after you plug it in? If so, you might have a faulty cable or USB port, so your iPhone will beep everytime it gets disconnected and reconnected to the computer. If it's not that, try to describe the sound. Is it similar to what other sounds on iPhone system?
    JP

  • IPhone 4 registers that it is getting a charge (vibrates when plugged in) but is not charging

    My iPhone 4 registers that it is getting a charge (vibrates when plugged in) but is not charging.  The charging display shows the fully charged symbol and not the charging symbol.  I have tired charging using two different cords and into both my computer and an outlet.

    Thanks Jennifer.  I have done some searching and nothing firm came up.  I have also tried a hard resent, both with it plugged in and without.  I have an appointment at the apple store tomorrow.  I too think a restore or new battery is in my future.  Thanks again! 

  • There is no "beep" sound alert when the totally flat battery start to charge for my iPhone 5

    There is no " beep" sound alert when the totally flat battery start to charge for my iPhone 5

    Problem solved. I tore the phone down and did another, the third one, liquid repair and clean on it and to my surprise it fired right up with absolutely no signs of damage and all functions working perfectly.

Maybe you are looking for

  • Opening and closing files very slowly -MAC - Batch processing broke illustrator...

    I have been batch processing between 15 and 30 thousand svg files over the past few days(simply centreing the orbjects on the art board mergring overlapping objects and saving as AI's) - the individual files are very small 20kb max. this was working

  • Error : eSSO PG 10.1.4.0.1 Connect to OIM 9.1.0.2_BP7

    hai bro,. i got some error when i try configure eSSO-PG to OIM 9.1.0.2_BP7 Error : Invoking APICommandInvoker. Invoking command add_credential Populating arguments for command add_credential Returning 'operation' for command add_credential No Executi

  • Need dynamic Photo Gallery

    Hi I am new, not expert in flash. Knows only basic flash action scripting, can any body guide me about dynamic flash photo gallery. How can import images in flash from database. please help me, I need that urgently, all suggestions are welcome. Regar

  • Standard Proxy Deleted:Method To Restore

    Hi guys, From the transaction code SPROXY, I was supposed to regenerate the standard proxy so that the changes made on the PI end for the same interface reflect in ECC as well. But my mistake I deleted the standard proxy and when I try to create the

  • Link in flash chart : passing paramerters

    I'm quite new to use APEX 4 and has a problem with passing parameters in a link from one flah chart page 7 to another one (page 6). One my first page I have 3 bars (result of my select on table VBI_DOC_DETAIL_IN). There the user can choose one specif