No blank first column in Excel after ECC 6.0 upgrade

Hi,
I am facing a weird issue. There was a recent upgrade to ECC 6.0, after the upgrade the excel sheets that are downloaded from SAP transaction COOIS do NOT have a blank first column.
Is there a way to fix this issue, some external applications use this excel report to read the data and it is really difficult to fix all those applications. Please do let me know if you have any clue.

Try activating the Heirarchy in R/3 and re-trigger the load, error is very specific to structure of the hierarchy. there is a possibility that this Hierarcy could have got inconsistent after the upgrade.
Thanks,
Amit

Similar Messages

  • Error in WBS Element Hierarchy load after ECC 6.0 Upgrade

    Hi All,
    After ECC 6.0 Upgrade in R/3, we are doing test load in a Test server. While doing, we have encountered an issue with 0WBS_ELEMENT Hierarchy load. The message in the monitor is like below.
    "Node ID 00014240 has not been included in the hierarchy
    Message no. RH207"
    When I run the same hierarchy in another system which is not upgraded , it works fine.
    Anybody has faced similar kind of issues and can throw some light on this issue?
    Thanks,
    Mohan

    Try activating the Heirarchy in R/3 and re-trigger the load, error is very specific to structure of the hierarchy. there is a possibility that this Hierarcy could have got inconsistent after the upgrade.
    Thanks,
    Amit

  • Load balancing after ECC 6.0 upgrade

    Hi
    I we this configuration on ECC 6.0 upgrade:
    SAPGUI 7.10
    SAP_BASIS  700  Patch level 15
    SAPportal ESS
    Webdispatcher Installed
    Internal ITS
    Single sign-on
    Can somebody assist as with identifying the problem with load balancing (PUBLIC) E.g. When running ESS remuneration package via the Sapportal. we have configured ITS-Based GUI Services on transaction SICF for customised ZESS_PZ11PDF service.
    When we have load balancing group on the load balancing does not work, because  I  see somebodyu2019s payslip
    but when using one app server I see my own payslip. Please help.

    Hi PR,
    Please take a look at the following link:-
    http://help.sap.com/SAPHELP_NWPI71/helpdata/EN/28/75153a1a5b4c2de10000000a114084/frameset.htm
    "You can only use the SAP message server for HTTP load distribution if 
    the browser is the direct client of the message server. If another     
    component lies between the client (browser) and the message server, (for
    example, the portal), you cannot use the message server to distribute  
    the load."                                                             
    When using the External ITS you could balance the load using the message server and logon groups. In 700 this functionality is not present if there is not a direct connection to the client (Firefox or IE). So you will have to install the webdispatcher to balance the load.
    Hope this helps
    Michael

  • Open Dataset for input in BINARY MODE not working after ECC 6.0 upgrade

    Hi All,
    Our requirement is to download an XML file from the application server and there is a customized program to download these files.
    This program uses the statement,  Open dataset ...for input in BINARY MODE
    and it works perfect for 4.7. There were no issues. But, after the upgrade to ECC 6.0 this does not work.
    When the data is read in ECC 6.0 , it is shown in some special characters and it could not be opened with XML editor and the file is not completely downloaded. I read through the forum and tried the following statement as well,
    Open dataset....for input in LEGACY BINARY MODE.
    After this statement, there were no special characters, but there is a blank space introduced before every character.
    Example : TEST(actual)
                      T E S T (After the legacy binary mode)
    Could you please let me know if there is any solution to rectify this problem. Appreciate your help.
    Thanks a million.
    Edited by: Manikd on May 12, 2011 3:52 PM

    But this program was already using BINARY MODE and after upgrade this is not working. I know, it may work in TEXT MODE. However, I cannot change the whole program to TEXT mode now.

  • SAPLFAGL_ITEMS_SELECT runtime error in FAGLL03 after ECC EHP 7 upgrade

    Hi all,
    We have recently upgraded to SAP ECC to EHP7, after this we are getting SAPLFAGL_ITEMS_SELECT runtime error in FAGLL03 report.
    Runtime error is not about a time out
    I have searched for a note but could not find any on this problem.
    Information on where terminated
        The termination occurred in ABAP program "SAPLFAGL_ITEMS_SELECT", in
    "FAGL_GET_ITEMS_BSEG". The main program
        was "FAGL_ACCOUNT_ITEMS_GL ".
        In the source code, the termination point is in line 412 of (Include)
        program "LFAGL_ITEMS_SELECTU08".
    Thanks in advance,

    Hi,
    Check this SAP note1578577 - FAGLL03: Dump DBIF_RSQL_INVALID_RSQL. Another one is 1728986. Cannot check further as I am not aware of exact patch level.
    If this does not help kindly raise it to SAP as dump is in standard object.
    Regards,
    Anand Raichura

  • BSP iview not working after ECC 6.0 upgrade

    Hi,
            We are using MSS application in our portal.When we click the Employee list under manager profile it redirects us to a new page aontaining 3 to 4 iviews like general data,Personal data(Par file based iview) etc
    After selecting the employee all data pertaining to the employee appear in these iviews(data comes from SAP HR system).There is one more iview that represents the emergency information of the employee that is a BSP iview.Few days before we have upgraded ECC 4.6 to ECC 6.0 after this upgrade we are getting values in all par file based iview but the data is missing in the BSP iview.
    Can anyone help?
    Regards
    Imran

    Hi,
    Are you getting any error? After upgrade do you activated the bsp service through
    T Code: sicf
    then Service Execute, then
    defalut_host --> sap -->bc --> bsp --> sap -->your BSP Application Name, then right click and Activate.
    Regards,
    SrinivaS

  • Problem with ITS after ECC 6.0 upgrade

    Hi All,
    I am facing problems with customized ITS application created based on CATW. It does not work properly after an upgrade to ECC 6.0 from 4.7. Some of the screens user interface is different when i compared that of with 4.7. I came to know that ECC 6.0 uses the Integrated ITS where as 4.7 uses the Stand-alone ITS. What is the difference between them? Is there any way to deactivate the Integrated ITS and run the application on ECC 6.0 as it was before on 4.7?
    Any help much appreciated.
    Thanks,
    Naga Bokkisam

    Hello Naga,
    can you be more specific about the differences between 4.7 and ECC 6.0? Are you using the SAP GUI for HTML (~webgui 1)?
    With best regards,
      T. J. Domsalla

  • Final Issue Indicator not set in maitnenance order after ECC 6.0 upgrade

    Hi,
    We encounter this problem after upgrading to ECC6.0 from SAP R/3 4.6C
    Final issue indicator (RESBD-KZEAR) is not being set in maintenance order (IW33) for sub-component non-stock items in General Data page
    Would be great if anyone could guide in this regard
    Detailed Scenario:
    1) Maintenance Order is created (IW31) is created in plant A
    2) For non-stock items, reservation created by maintenance order creates a purchase requisition
    3) Account Assigned STO (against maintenance order) is created from purchase requisition
    4) Transfer Posting done from Plant B (351 movement) for complete qty
    5) GR at Plant A done (101 movement) for complete qty.
    6) Final Issue Indicator is not set in General Data page eventhough the complete quantity is delivered.
    Thanks
    Edited by: muthukumarv on Apr 2, 2010 8:59 PM
    Edited by: muthukumarv on Apr 2, 2010 9:00 PM
    Edited by: muthukumarv on Apr 2, 2010 9:03 PM

    Hi,
    Please check in the STO if the "Delivery completed" indicator is checked or not?
    If Yes, then search some correction notes of SAP and get it implemented or raise OSS message with SAP to get the Final Issue indicator to be set in maintenance order.
    If No, then ask your MM consultants to investigate that. They can check the config of "Goods Receipt" Or check if the total quantity GR has been done Or some Under delivery/ Over delivery tolerance has been maintained.
    Thanx.
    Nilmoni.

  • Impact on BI after ECC 6.0 Upgrade from Ehp 3 to Ehp 4

    Hi All,
    We are planning for an upgrade of our ECC 6.0 System from Ehp 3 to Ehp 4.
    Could you please provide me inputs in what needs to considered in terms of BI system?
    I know the following thing:
    1) Delta Queues must be cleared before the upgrade starts but what needs to be considered for FI and CO Data Sources.
    Any SAP Documentation available?
    Thanks,
    Neelesh

    What version of BI is yours...3.5 or 7.0???
    Unless the ehp4 is bringing some functional changes to FI or other functional datasources which needs to be replicated on to the BI side.
    i think the below link might help.
    Technical news brought with EHP3 and EHP4 compared to ECC6
    Thanks
    Deepak

  • ECC 6.0 UPGRADE - BW 3.10

    We are planning to upgrade our source system from 4.6C to ECC 6.0.  We are on BW 3.10 ( But planning to upgrade to BI 7.0 once after ECC 6.0 upgrade)
    Would like to know,
    1. Do we need apply any plug-in requirements to accommodate the ECC 6.0 compatibility?
    2. Will the existing BW 3.10 work without any issue with ECC 6.0?
    ( We are not going to do any change with new Business content available with ECC 6.0)
    3. What are the other precautions, we need to take in order to work BW 3.10 with ECC 6.0?
    Advance Thanks.

    refer replies here:
    Re: ECC 6.0 Upgrade with BW 3.5

  • How to set first column as date (dd/mm/yyyy) in the specific format in excel

    hi need help wat i did need help is tht i need wen ever i send view a excel data  the first column set to date  but some times wen i view in different type of pc the date format change to mm/dd/yyyy. is  thr any way i can set the format?

    If you just need to reformat a correct date to show up as dd/mm/yyyy, just use the "Format Cells" command and set a custom format string to exactly that. If, on the other hand, you are finding that Excel just doesn't get that the first value is a DAY, not a month, such as trying to graph a temperature data logger that records data in dd/mm/yyyy:
    Reformat the strings as dd/mm/yyyy, using the first method. This will make them LOOK correct, even though the actual date VALUES are still day-month inverted. Now save the table as a .CSV file. This will save the dates as plain text in the correct order, which you can then re-import and have Excel now read the correct date value.
    Ryan R.
    R&D

  • SQL Loader Inserts chr(13) and chr(10) in the first column of every row.

    Hi,
    I have exported a data in a pipe delimited file using TOAD in one database. Now I want to load the data in my local database using SQL Loader. However every time I try to load the data a double quote followed by a new line is entered for the first column of each row. Unfortunately the delimited file is very big and hence can't be posted here. However I tried the same with a customized table and its data and found the same problem. Below are the table structures and control file that I used.
    create table test_sql
    a varchar2(30),
    b date
    insert into test_sql values('51146263',sysdate-3);
    insert into test_sql values('51146261,sysdate-1);
    EXPORTED PIPE DELIMITED FILE_
    A|B|!##!
    51146261|04/14/13 4:55:18 PM|!##!
    51146263|04/12/13 4:55:32 PM|!##!
    create table test_sql1 as select * from test_sql where 1=2;
    CONTROL FILE_
    OPTIONS(SKIP=1)
    LOAD DATA
    INFILE 'C:\Users\Prithwish\Desktop\Test.txt' "str '!##!'"
    PRESERVE BLANKS
    INTO TABLE TEST_SQL1
    FIELDS TERMINATED BY '|' OPTIONALLY ENCLOSED BY '"'
    TRAILING NULLCOLS
    A CHAR(2000),
    B DATE "MM/DD/YYYY HH12:MI:SS AM"
    select * from TEST_SQL1;
    After this when I paste it in notepad I get the following result
    A B
    51146261"     14-APR-0013 16:55:18
    51146263"     12-APR-0013 16:55:32.
    I have no idea how the quotes or the newline appear. Is this a Toad bug? Any help would be greatly appreciated. Really urgent.
    Thanks in advance
    Regards

    Hi Harry,
    I actually thought that the str !##! was causing the problem. Actually my original export has some new lines in some specific columns so I can't keep the new line as my line terminator and hence I kept the !##! as my terminator.
    When I put the same data in a notepad and load it there is no problem at all. For e.g I just typed the following in a notepad and the data loaded just fine.
    A|B|!##!
    51146261|01-01-01 10:10:10 AM|!##!
    51146263|01-01-01 11:11:11 AM|!##!
    Its just when I load the exported file there the problem arises though I have verified the file using UNIX as well using octal dump and found no hidden characters.
    Regards,
    Prithwish

  • Delete a column in excel sheet through POI?

    hi
    Can anyone help me out on physically deleting a column in Excel using POI framework?
    Though I am able to remove indidual cells,the cells remain blank. I want them be completly removed from the sheet.
    pls help

    Soph wrote:
    hi
    Can anyone help me out on physically deleting a column in Excel using POI framework?
    Though I am able to remove indidual cells,the cells remain blank. I want them be completly removed from the sheet.
    pls helpCan you do it in the Excel in your PC? I bet not
    Then you are able to help me how to generate a chart in Excel using POI :D :D
    But first, where to download POI library, Thanks
    {EDIT} found it never mind
    Edited by: mycoffee on Jul 1, 2010 12:15 PM

  • PKUNRE field not getting populated in 2LIS_13_VDITM after ECC upgrade

    Hi,
    We are seeing blank values for PKUNRE / 0BILLTOPARTY during extraction from 2LIS_13_VDITM.
    We are experiencing this issue after ECC upgrade which went live recently.
    We have applied note 580694  to correct missing fields in the billing extractor.
    This field is sourced from VBPA/VBRP.
    Our functional teams confirmed that VBPA/VBRP are updated properly and there seems to be no timing issue.
    However, the record is landing in PSA with blank BILLTOPARTY.
    Where could the problem be?
    Is there any thing we missed?
    Can any one throw some light if you have experienced this kind of an issue after upgrade.
    Thanks a ton in advance,
    Sandy.

    Hi Sandy:
        In my system I didn't find the Field PKUNRE on the VBPA / VBRP Tables, so my guess is that you're dealing with a Custom Enhancement, if this is the case the SAP Note 576886 - "Change to user-defined fields not extracted" might help you in solving this issue.
    Regards,
    Francisco Milán.
    ***Follow up note:
    I double checked and found the Field PKUNRE on the Extract Structure for 2LIS_13_VDITM (using Transaction Code LBWE) so now I know that you're working with a Standard field and not with a custom ehnancement, the SAP Notes below address a similar issue to yours but they are related to Applications 11 and 12, not for App 13. I apologize for the confusion.
    Note 621684 - "Fields PKUNRE and PKUNRG are not filled from delivery"
    Note 379237 - "BW Content LE-SHP: missing partners in 2LIS_12_VCITM"
    Edited by: Francisco Milan on Jan 28, 2011 12:54 PM

  • How can i use Itemsyms in a first column?

    I want to use use Itemsyms in my first column of mulitlist box. But it always exist with first content of ItemNames. I want to
    know whether I can put a Itemsyms in a single column and data in other columns. Should i create a null string array and set it as
    a first column?  And the Itemsyms only can be put in the first column?
    I feel confused now after try many times. 
    please give me help.
    attached my vi.
    By the way, When i try to set number of row and column of list box, for column, the set value is 5, but the value get from property is 4.
    I don't know the reason.
    thanks
    br.
    Attachments:
    subvi_ListCheck.vi ‏16 KB
    main.vi ‏11 KB

    mmm2006 wrote:
    Hi,
    Thanks.
    How about other my questions? Please give me your advice.
    Thanks.
    mmm2006 wrote:
    I want to use use Itemsyms in my first column of mulitlist box. But it always exist with first content of ItemNames. I want to
    know whether I can put a Itemsyms in a single column and data in other columns. Should i create a null string array and set it as
    a first column?  And the Itemsyms only can be put in the first column?
    I feel confused now after try many times. 
    please give me help.
    I do not understand this term "Itemsyms".
    If you create a "null string array", your first column will become empty. You want this way or you want to replace your data in the first column? Both are different...
    You can very weel put your "Itemsyms" in a single column & data in others.
    - Partha
    LabVIEW - Wires that catch bugs!

Maybe you are looking for