No blue tooth connection after ios upgrade

My Iphone 4s does not find any bluetooth devices after upgrading from ios6 to ios7.
I've tried reseting all configurations for network connections and all configurations in the phone without success.
What is the next step?

The iPhone has previously been paired with the device. But neither the iPhone or the connecting device (car stereo) detect the other device after this upgrade. I have removed all previously paired devices from the car stereo and other iPhones detect the car stereo.
It's like the iPhone bluetooth doesn't start at all.

Similar Messages

  • Phone turns off blue tooth connection after 30 seconds into the call (when screen goes to sleep)

    Installed 2.2, paired my fascinate with my plantronics explore 240 headset, accessed voice dial (which worked), connected my call, after thirty (30) seconds the blue tooth connection dropped, picked up the phone and continued the conversation.  Just turning on bluetooth and leaving the phone sit for 5+ minutes keeping the screen active the blue tooth does not turn off, let the screen go to sleep and the blue tooth turns off.
    I can not maintain a blue tooth connection when the screen goes to sleep, not even during a call.  Is there a setting I am missing to keep this from happening or ... An alternative?
    Any help would be appreciated

    Hi. 
    The Bluetooth should not disconnect when your screen goes to sleep.  Have you tried re-pairing the Bluetooth since the upgrade?  Below I have provided you with the steps to pair the Bluetooth again.  (Please make sure both devices are fully charged when doing so.)
    Step 1 - Enable Bluetooth functionality on the Samsung Fascinate.
    Note: The Bluetooth power must be set to ON position to pair the handset with a Bluetooth headset.
    From the main screen, tap Menu.
    Tap Settings
    Tap Wireless & Networks
    Tap Bluetooth to turn on Bluetooth
    Step 2 - Put your fully charged Bluetooth headset into pairing mode.
    Start with your Bluetooth accessory powered off.
    Press and hold the Call Control Button until the light indicator flashes blue and red. 
    Your Bluetooth accessory is now in pairing mode and ready to be paired with your handset.
    Step 3 - Pair the Samsung Fascinate with a Bluetooth Accessory.
    Note: The Bluetooth power must be set to ON position to pair the handset with a Bluetooth headset.
    From the main screen, tap Menu
    Tap Settings
    Tap Wireless & Networks
    Tap Bluetooth Settings
    Place accessory in pairing mode, see accessory pairing instructions.
    Tap Scan for Devices, device starts Searching.
    Tap [Plantronics Bluetooth] to pair
    Pairing Complete, touch home to exit.
    If you still need assistance, please send me a Private Message and I will be happy to help you.
    Thanks,

  • No wifi connection after ios upgrade

    I had iPad 2 wifi connection prior to the upgrade to a new IOS version.  It did not detect my wireless router at home.  I had tried to reset, and other possible suggestions found on the Internet, but none could help solved my wifi connection issue..  It will have connection if I sit next to my Verizon wireless.  If I move just a few feet away, there is no signal.
    I also brought it to my friends, and it did not detect any wireless router there.  But if I sit next to the wireless router, it detected it.
    Will try anything just to get my iPad to connect to the wifi again.
    Thiking of brining it the Apple Store and hope they can help.

    1) Delete your WiFi connection on your iPad.
    2) Power off your router.
    3) Do a reset on your iPad by pressing home and on/off button
    4) Power router back up.
    5) Add your WiFi connection back to your iPad.

  • Loss of Blue tooth function after upgrade to 10.6

    I have a MacBook Pro... I also have a Motorola Droid that was working perfectly with blue tooth when I was using OS 10.5 etc... I was able to "Browse" my phone, Transfer files, it worked like a dream. After upgrading my OS to Snow Leopard... I am unable to transfer files or do any thing of any value using the blue tooth connection on my computer. When I attempt to "Browse" the phone I get the message "The Device does not have the necessary services" I have searched the forums for help with this issue... I'm seeing a lot of "your phone doesn't have that capability" or "your provider has disabled that to make you pay more" or worse yet... I've seen things like "blue tooth isn't made for file transfer it's only for headsets and headphones.
    Admittedly most of the people posting these questions had never been able to browse or transfer files before and were just now trying to make this work. I on the other hand had been able to use all these services. Which is why I am not considering my phone as the source of the problem at this time.
    Nothing has changed on my phone "no updates in software" and the only change that was made is going from Leopard to Snow Leopard. This is leading me to the conclusion that there is something I'm not seeing in 10.6.x that has caused an issue with my blue tooth functionality... I have gone in to system preferences, in to file sharing and enabled sharing in bluetooth... I have also tried to delete the Bluetooth plist file as was suggested in other discussion forums.
    This has not changed any thing I still get the same error when trying to transfer files or browse. If any one else has any advice on something I could try to return my bluetooth function to Pre10.6 that would be most helpful... I'm aware of work arounds "Emailing my self,,, etc." I'd prefer to have my bluetooth back.
    Sorry if this post sounds harsh or snippy... I'm getting very frustrated.

    Is it smarter economically to repair replace the board, or use the computer as it is and purchase a replacement?
    This depends on your usage. If you find performance with 1GB to be satisfactory (maybe not optimal, but satisfactory), just keep using it as is. A new logic board (which will likely be used or refurbished depending on the source) is $400-$800 plus installation. I don't know what company's charge to repair the logic board.
    If you decide to go with a new system, you can sell your current system to offset the cost. Or just keep it as backup/extra/computer, or give it to a family member who can use it. If I were going to give it to a family member, I'd reinstall Tiger, as it probably will work a little better in 1GB than Leopard.

  • I bought a Sandisk Connect Media Drive, downloaded the app from iTunes.  Before iOS 8, movies played fine.  After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive.  Anyone else have a similar issue?

    I bought a Sandisk Connect Media Drive, downloaded the app from iTunes.  Before iOS 8, movies played fine.  After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive.  Anyone else have a similar issue?

    I checked with SanDisk's own online support and they indicate that they have notified Apple of the issue.
    According to SanDisk, the problem lies with Apple not having the iOS 8 version of the Safari browser having DRM decoding enabled that the Media Drive relies upon to decode and play iTunes DRM titles. Non DRM encoded videos will play in the browser.
    DRM audio is not effected as this is handled by the native iOS music app.
    As of the date of this post SanDisk have not been given a timeframe by Apple for this issue to be resolved.
    I hope that Apple resolves this issue quickly as I have a large collection of DRM video titles on a 128Mb memory card installed in the Media Drive that I am unable to view.

  • I keep loosing blue tooth connection resulting in mac mini freezing.

    I keep loosing blue tooth connection resulting in mac mini freezing.  I am using an apple wireless keyboard and mouse.  This did not happen until i upgraded to mountain lion. your thoughts
    I leave the system on with Itunes loaded so I can use it for my media center with my Apple TV's
    I use Super Duper every night at 2am for back as well as time machine.
    I have the newest mac mini
    2.3 Ghz Intel i5
    8 gb of ram
    i have 3 WD 2TB Hard drive connected (2) USB (1) Firewire
    Also a Plextor blueray drive
    Hooked to a Apple HD Monitor
    Please Help.
    I have been in tech support many times.  I also brought it into my local Apple store. 
    Frustrated .
    I spent a lot of $$ to make this set up happen
    Please help.
    Scott Southard
    [email protected]

    Did you ever find a resolutution to your issue? I have a similar issue after installing Mavericks where the Arris modem goes to sleep when my iMac does, even though other devices on the network are actively requesting data. For the time being, as long as the iMac doesn't sleep the network is fine.

  • IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

    PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore.  Just get an Apple Logo then a flashing blue screen as if it is caught booting up.   This has happened twice before and iTunes restore fixed it.  But this time device not appearing in iTunes.
    Running iTunes for PC.  But as stated restore has worked before!  Any help greatly appreciated!!

    Place the device in DFU mode and let iTunes restore the device to factory condition.

  • Can you use earphone jack and continue to use blue tooth connection to speakers like bose

    Can you use earphone jack and continue to use blue tooth connection to speakers like bose

    Hi,
    I'm a owner of the X-fi Elite Pro, and for me the headphone + speakers settings works very well. Just to be sure, you bought the X-Fi XtremeGamer Falalty Pro Series? and not the XtremeGamer Fatalty Champ Series or even the old regular X-Fi Fatalty? If so, I'm quite sure you need the I/O box with the 6.35 mm (/4 inch) steroe jack. My headphones are connected through the /4 inch jack on the Elite Pro unit and my 5. surround system through the X-Fi card's 3x /8? mini jack.
    I guess you have to buy the X-Fi I/O Dri've Upgrade Kit (or the Console Upgrade Kit) to use your headphones and speakes at he same time. I chose the Console because i couldn't li've with a thick and ugly digital cable sticking out in the front of my PC?
    Hope it helped!

  • Installing Blue Tooth Mouse after Tiger

    I just upgraded to tiger with an iMac G4 17". I had previously installed a bluetooth USB adapter for my wireless mouse. Now, with Tiger, everytime the computer goes to sleep or screensaver, the blue tooth connection to the mouse is lost and when the computer is turned on, it tries to find the mouse. Any reason for this? How can I get it back so the mouse is always installed and doesn't lose connection? Thank you

    There is one standard rule about OS X. It changes a lot with each major update (full .1 ) and messes with drivers. Go to the site of the mouse manufacturere, and see if there's an update, or a fix.
    I have a standard rule, since OS X. NEVER use the driver that comes with a device. Do this:
    1. Try the device with no software, first. This si successful for almost all devices.
    2. Go to the site and download the driver. Why? Think about it. The box you buy is probably two months old by the time it hits the shelf. That's plenty of time for many bug fixes, and an update on the manufacturer's site. Mkae sense?
    Sorry for the rant.

  • Apple iPad 3. BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Can anyone help me please.

    BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Apple iPad 3. Can anyone help me please.

    All resolved at last
    Deleted the SMTP setting
    Recreated the SMTP using the same settings
    Able to send emails now
    No logic - as usual - just a bug!

  • Internet not connecting after ios 7.0.2 update on iphone 5

    Internet not connecting after ios 7.0.2 update on iphone 5

    Hi there PompasJr,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Camera isn't functioning
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    -Griff W.

  • 3G icon in the status bar got disappear after ios upgrade 8.1

    3G icon in the status bar got disappear after ios upgrade 8.1

    Nginear48 wrote:
    Thanks for your quick response. I've tried everything you suggested and get only temporary fixes. Sometimes for a day or two, sometimes only until I use Safari for the first time. It's annoying and probably effects battery life between charges.
    You would think that it must have some effect on the battery, but oddly enough, the update to iOS 8 actually helped my battery life, in spite of all of these hinky little issues that are taking place. In my experience, the activity icon is not affecting the battery in a negative way.
    Another issue with IOS 8.1 that you may have seen is the loss of icon pictures on home pages. Again it seems to be Safari related, since app icons found in the App Store are not affected, only web based icons you personally put on home pages. I get what I call a test screen similar to what you used to get on old tv sets on every one of my personal icons.
    I know exactly what you mean. I got that as well. On a few of them, when I opened the websites using the generic test screen icons and then closed them, they changed back to the way that they should look. For the ones that did not change, I recreated the home screen shortcuts and deleted the generic looking ones - the test screen icons.
    And don't get me started on iBooks.
    For the very limited use that I make of the iBooks app, i haven't noticed any problems, but I rarely use the app. I don't read books on the iPad other than a few user guides and if they are pdf guides, they reside in more reliable and feature rich pdf apps on my iOS device.
    I wish that I had the fix for the spinning activity icon, but everything that I try, is temporary at best. IMO, this is the buggiest iOS update that I have seen, and I have been using iOS devices since iOS 3 on my first iPad. I realize that there are plenty of people that are not experiencing issues, but I have seen a number of weird things that I wish I could fix. None of my problems are major, but they are annoying.

  • No network LAN-connection after iOS 5.1.1update

    Today i tried to solve a big issue after updating my AppleTV's to 5.1.1 (actual version: AppleTV3,1_5.1_10A406e_Restore.ipsw). After updating my Apple TV´s, they could not connect to  the Apple activation server. No Home Sharing was adjustable and also logging in iTunesStore was not possible. The update I have done via LAN cable, and I changed  nothing in my network configuration. The network (networkadress via DHCP) is indeed set up by default in the AppleTV automatically. Nevertheless, nothing went. Then I removed the network cable and made a reset of the AppleTV and tried to connect via Wi-Fi. With Wi-Fi, he finds the activation server and everything works as it should. Home Sharing, iTunes, streaming. However, once the network cable is plugged in and the Apple TV is restarted, it is again not possible to get access the iTunesStore. Home Sharing is not possible. The networkcable are fine. Both MacBook, as well as my TVs have internet connection over the same network cable. If I unplug the network cable from the AppleTV again, anything goes. Only via WLAN, but it's just too slow to stream data from my Mac. I have this "strange behavior" on 3 AppleTV 3.Gen., which are in the apartment. The previous iOS-Version on the same network cables, worked great. Can anyone reproduce the problem? Or have I now 3 bricked devices? I tried to downgrade over itunes. But this is not possible anymore. I installed 3 times the update. But nothing goes. Please can anybody help me.

    I found another link titled "Apple TV Death after update"  and found several links that have proven to work to restore to the previous version.  Here is my post:
    "I had originally replied to a post titled "No network LAN-connection after iOS 5.1.1 update". That has been my issue after updating to 5.1. Wirless worked for me but iTunes match and Podcasts were slow to respond. I finally downgraded to the previous version (5.0.2). So far, my ATV3 has been operating exactly as it did out of the box. No more activation failed message, and all components of ATV are functioning flawlessly on my whole home LAN network.
    I also wonder what Apple was thinking for releasing this update without adaquate testing. I can forgive them for Maps, but not this. ATV has been around long enough for all of the kinks to be worked out and any updates to just plain work. I did like the new menu displays in apps and how you could rearrange the program icons on the home screen.
    Perhaps they will get it right. Some day. But until they show proof that any future updates are correct and provide detailed instructions on how to revert back to a previous version, I will be very leary of updating. Spending a week reading message boards on how to do a simple resotre is not my idea of how to spend my weekends.
    As a side note, I am a PC, so to restore from an .ispw file located on your system, you must press the Alt & Shift keys togather, then click the Restore button, and a window will pop-up so you can select the location for the restore file."
    Directions to restore:
    "Yes you can. I am a PC. Download the .ipsw file and save to your desktop. Unplug the LAN, HDMI and power cable. Connect the usb cable from your laptop to the ATV. If iTunes does not automatically launch, start it. After iTunes is running, plug in the power cable to the ATV. iTunes will recognize the ATV and will open the restore window in iTunes.
    Press the Alt and Shift keys togather, then click on the Restore button. A file window will open so you can navigate to the desktop (or where ever you saved the file). Select the AppleTV3,1_5.-.2_9B830_Restore.ipsw file. iTunes will start the restore process.
    When you see the message that it has completed the restore, unplug the usb cable and power cable. Reconnect the LAN and HDMI cable then plug in the Power cable in that sequence.
    Follow the setup procedure again and all should be as it was before."

  • No valid license found after IOS upgrade on C3750x switch

    HI,
    Two switches below are working fine as a stack with IOS c3750e-universalk9-mz.122-55.SE5.bin & ipbase license.
    Switch#1 (Master, WS-C3750X-24P-S)
    Switch#2 (Member, WS-C3750X-24P-S)
    After IOS Upgrade to c3750e-universalk9-mz.150-2.SE7.bin, The stack was broken. Switch#2 didn’t recognise valid ipbase license with new IOS and came up with lanbase license instead. Therefore stack cannot be composed due to license mismatch between Switch#1 (ipbase) and switch#2(lanbase).
    I’m wondering why Switch#2 didn’t recognise ipbase license with new IOS even though IPASE is running well with previous IOS.
    Here is excerpt from “show version” with 15.x image on Switch#2.
    License Level: lanbase
    License Type: Default. No valid license found.
    Next reload license Level: lanbase
    Here is excerpt from “show version” with 12.x image on Switch Stack.
    License Level: ipbase
    License Type: Permanent
    Next reload license Level: ipbase
    Thanks
    Jeong

    Thanks guys,
    I have fixed the issue by configuring  'license boot level ipbase' on the member switch#2. The switch recognised IPBASE license well and joined the stack successfully.

  • After ios upgrade to 7.0.4 i got power botton and no sim problem need help      help

    after ios upgrade to 7.0.4 i got power botton and no sim problem anyone having this problem?

    Installing an iOS update does not add a physical button.
    As for the "No SIM" message, try removing and reinserting the SIM or replacing the SIM.

Maybe you are looking for