No bluray for my hp pavillon dv6700 with matbleepa bd-cmb uj-120 ata

Hello
I have a problem with my hp pavillion dv6700, it can´t read or write bluray discs. It works well with CD and DVD. I believe I have a mat**bleep**a bd-cmb uj-120 ata. My OS is windows 7 ultimate. what can I do? do I need special drivers for W7? where can I get them?

Hi myujraf,
Welcome to the HP Community, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having a problem playing bluray discs. I will be happy to help you. What is your product number? There are several different models in the dv6700 series.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Similar Messages

Windows 7 (64 bit) driver for the matshita bd-cmb uj-120 ata device for my hp pavillion dv6478

I recently upgrade my OS from Vista 64 bit to Windows 7 64 bit and the driver for my DVD player has a yellow question mark on it and I need to know if there is a driver for matshita bd-cmb uj-120 ata device for windows 7 64 bit

Hi,
Hope this helps:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Problem with MAT**bleep**A UJ-840D built in COMPAQ PRESARIO V2000

Hi. I am getting problems with the mat**bleep**a UJ-840D drive built in my laptop. I can watch DVD movies but cannot read, use or burn any CD discs.
I tried to upgrade the firmware version to solve the issue but the application does not work. The software is: FIRMWARE UPGRADE GCC4243N CDRW DRIVE (directly downloaded from HP web site). I select the file: "s5hp108.DLD" and when I hit the "FW Flashup" button, it brings error: "THIS PROGRAM CANNOT BE USED FOR THE SELECT DEVICE". (MAT**bleep**A UJ-840D - 1.02".
The currently drive installed is: Driver provider: Microsoft / Date: 01/07/2001 / Version: 5.1.2535.0
I think the CD/DVD writer drive must be ok because it works with DVD discs. I have tried with a lot of types and branch of CD discs, but not of them can be read.
If I can to be enabled to make an driver or firmware upgrade, or both, maybe it can be solved.
Thanks.

1-800-426-7378 the DVD should be a CRU so you won't have to send the laptop in
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

T61p XP3 with Mat**bleep**a UJ-852 will not read CDs

Got From IBM Certified Used Equipment back in April, and just noticed I can't read CDs. Read alot of problems with the UJ-852 and DVDs, but not the problem I'm (my wife) is having. Machine Type 6457 AK7 with latest BIOS and Controller code. I have the Extended Warranty, but haven't found the right number to call. I can replace the hardware myself, and don't want to send Laptop back.
I sounds as if the Mat**bleep**a hardware has had problems for a while, and I should be able to get some help from Lenovo.
How come they put that drive in there in the first place, knowing it had problems... maybe I wouldn't notice... well, my wife noticed and her temperature is rising fast
Any suggestions??
Regards,
Billl

1-800-426-7378 the DVD should be a CRU so you won't have to send the laptop in
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

Is it Possible to change the DVD drive to Bluray for HP Pavilion dv6-6176sx

Hi All,
Is it Possible to change the DVD drive to Bluray for HP Pavilion dv6-6176sx Entertainment Notebook PC?
Thanks
This question was solved.
View Solution.

Sure it is not even very difficult. Do you just need a BR reader or a burner/reader? The replacement disk drive will be $80-120 or so, maybe a bit less. You can find them on eBay. You can use a generic one but that may require some reworking of the faceplate or just get an original dv6-6000 BR drive on eBay. Swaps out with a couple screws on the bottom; slide out and slide in the replacement. You will need new software to play BR movies, of course.
Post back with any questions

HT201328 I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first or set one up for her and then unlock the phone.

I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first ( I now have a new iphone on this account) or set one up for her and then unlock the phone. I am worried about upsetting the new phone.

I would complete unlocking as is and then
restore as new once you know the iPhone is unlocked
Be aware Orange will process the request at their speed
one of the reasons they usually reside at bottom of User Sat surveys
will likely take weeks
This may also help
http://support.apple.com/kb/HT5014

Sir, We have around 500 items as Insurance Spares in the stores. These spares are checked once in 6 months for their healthiness, storage, etc with a special checklist. We want this checklist an schedule in SAP ( MM). How to do it? Please help.

Sir, We have around 500 items as Insurance Spares in the stores. These spares are checked once in 6 months for their healthiness, storage, etc with a special checklist. We want this checklist an schedule in SAP ( MM). How to do it? Please help.We are presently doing it as similar to PM schedule ( PM module) but want it in MM module.

Hi Prerna
Please refer the this doc ...it might help you
http://www.erptips.com/Samples/ERPtips-SAP-Training-Manual-SAMPLE-CHAPTER-from-Basic-Quality-Management.pdf
and kindly update the status if it works or not
Regards
Partha

Jabber for iPhone 9.6 Integration with OpenLDAP

     Hi everyone! i just found an issue when try to integrated jabber for iphone version 9.6 with OpenLDAP that seem like not working and want to describe my environment as below.
Using BE6K 9.1 includes,
     - CUCM 9.1.2
     - IM&Presense 9.1
     - Jabber for Window 9.6 integrate with OpenLDAP using EDI on jabber-config.xml is working properly.
     - Jabber for iPhone 9.6 integrate with OpenLDAP using BDI on jabber-config.xml not working(cannot lookup)
     - Jabber Voice for iPhone and Android can integrate with OpenLDAP which configure in phone configuration
     - Both of Jabber can't access the photo in OpenLDAP with "jpegPhoto" attribute.
By the way im also included jabber-config.xml files for further troubleshooting. Another question, is it possible to include EDI and BDI for working together in one jabber-config.xml file
One another file is jabber for iphone log when im trying to search "anu" word in searching box
-- 2557-02-02 20:48:06.045 DEBUG [3d8d018c] - sidebar search, string is : a   <------ started from this line in my log file for easier troubleshooting.
If you need more log or any files for troubleshoot just tell me. Thanks for reading!.
<Jabber-config.xml>
<?xml version="1.0" encoding="utf-8"?>
<config version="1.0">
<Directory>
<DirectoryServerType>BDI</DirectoryServerType>
<BDILDAPServerType>OpenLDAP</BDILDAPServerType>
<BDIPrimaryServerName>10.0.1.11</BDIPrimaryServerName>
<BDIServerPort1>389</BDIServerPort1>
<BDIConnectionUsername>cn=xxx,dc=xxxx,dc=xx,dc=xx</BDIConnectionUsername>
<BDIConnectionPassword>xxxxxxxBDIConnectionPassword>
<BDIUseJabberCredentials>false</BDIUseJabberCredentials>
<BDIEnableTLS>false</BDIEnableTLS>
<BDIPredictiveSearchFilter>uid</BDIPredictiveSearchFilter>
<BDIUserAccountName>uid</BDIUserAccountName>
<BDIBaseFilter>(&(objectClass=inetOrgPerson)</BDIBaseFilter>
<BDISearchBase1>ou=users, dc=xxxx,dc=xx,dc=xx</BDISearchBase1>
<BDIUseANR>false</BDIUseANR>
<ConnectionType>1</ConnectionType>
<PrimaryServerName>10.0.1.11</PrimaryServerName>
<UseWindowsCredentials>0</UseWindowsCredentials>
<UseSecureConnection>0</UseSecureConnection>
<SearchBase1>ou=users, dc=xxx,dc=xx,dc=xx</SearchBase1>
<UserAccountName>uid</UserAccountName>
<BaseFilter>(&(objectClass=inetOrgPerson)</BaseFilter>
<PredictiveSearchFilter>uid</PredictiveSearchFilter>
<ConnectionUsername>cn=xxxx,dc=xxx,dc=xx,dc=xx</ConnectionUsername>
<ConnectionPassword>xxxxxx</ConnectionPassword>
<PhotoSource>jpegPhoto</PhotoSource>
</Directory>
</config>

Hi noom_ekkalak ,
Thanks for your answer!
I have specific LDAP parameter in TCT phone configuration as you say, then try to connect the "Directory" setting in Jabber Voice, but it didn't work . i just get the error “Unable to verify account” all the time. :(
Besides this ,is there anything i need to specific? How did you specific Jabber Voice "Directory" parameter?
Thank you!

When I open Iphoto, I see all my photos for a second and then they disappear and only a white dotted box appears. Then I click on it and for photos is a triangle with an exclamation point. It doesn't happen to all but quite a lot. how to I get them back

When I open Iphoto, I see all my photos for a second and then they disappear and only a white dotted box appears. Then I click on it and for photos is a triangle with an exclamation point. It doesn't happen to all but quite a lot. how to I get them back

Have you recently deleted photos using the finder or run clean up software? Is so restore your backup
If not the backup your iPhoto Library and launch iPhoto while depressing the option and command keys. Rebuild your database
LN

Standard report(for open PO order items) with estimated Delivery dates

hi friends
i would like to know if there is any standard report(for open PO order items) with estimated Delivery dates on it.
thanks
alahari

ME2M (by material)
ME2L (by vendor)
ME2N (by number)
Use selection parameter WE101 for open GR
and scope of list EINT (scheduling lines)

The standard report for BOMs of a material with a selected period?

Hi Gurus
Is there any standard report for BOMs of a material with a selected period?

Hi,
You will have to develop a report for your requirement,
The following tables will be used for the report
MAST-WERKS
STPO-MATNR
MARA-MAKTX
STPO-BMENG
STPO-POSNR
STPO-IDNRK
STPO-MAKTX
STPO-DATUV
STPO-MENGE
STKO-MEINS
STPO-AVOAU
Regards
Merwyn

Report For list of material Master with PO text

Hi all,
I need a report whether it is available in Standard SAP or a customized, for List of Material Master with their PO text.
If any one can help, please reply to this theard.
Regards,
Kapil Kulkarni

To get the material number combined with the PO text you will need the help of an ABAP programmer. The programmer can create a report for you using the function module READ_TEXT in the function group STXD. The tables to use are:
STXH - STXD SAPscript text file header
STXL - STXD SAPscript text file lines
The selection screen should have at least the following:
OBJECT - STXH-TDOBJECT
NAME - STXH-TDNAME
LANGUAGE - STXH-TDSPRAS
TEXTID - STXH-TDID
You find the information for these fields by going to the PO text entry screen and displaying the header information under Goto -> Header. For materials, the object is MATERIAL, the name is "material number", the language is "EN", and the text ID is BEST. You can use this program to get long text in lots of places like information records, purchase order texts, etc.
Hope this helps.

Report for payment due billing doc with taxes

Hi All,
I want the report for payment due billing documents with following fields and after payment is done( F-28 ) that document should not appear in the report for the said period.
Billing date, Billing doc no, Net value, Tax Amount
Thanks and regards,

Dear Swarup
You have to table join in SQVI - VBRP for Billing date, Billing doc no, Net value, Tax Amount and BSEG for payment updation details.
Take the help of ABAPer and develop a zee report to fulfill the requirement.
thanks
G. Lakshmipathi

Known issues for OBIEE Office Add in with Excel 2007?

Hi,
Does anybody know if there are issues for the office add-in with Office 2007?
i'm playing around a little bit to see how it works, but it seems that Excel interferes with the layout.
I do get different grafs and also i tried the tutorial with the excel template and my changes come only partly through.
Thanks
Sandra

Hi Sandra,
Were you able to use OBIEE Office Add in with Excel 2007? I am planning to look at this compatibility. I am looking here to seeif anyone found issues with this setup..
Thanks,
Bharat

Install instructions for Search Modeler and integrating with Apps 11i

Below are all the steps I took for creating integrating Search Modeler with an Oracle E-Business Suite 11.5.10.2 ATG RUP 7 instance called ERNIE.
Much thanks to Oracle Support ( Rajesh Ghosh, Vikas Soolapani and Roger Ford), as this simply wouldn't have been possible without them.
There are a few things in this document that may not be pertinent to your environment if you're doing this. I've made attempts to clarify those possibly optional sections in the documentation.
I've broken the document down into the following multiple parts
o Setting up a new RedHat 4.8 x86 server called ausSEARCHdev (The server is in AUStin, TX, is dedicated to SEARCH, and is for our DEV environment)
o SES (Secure Enterprise Search 10.1.8.2 install
o SES 10.1.8.4 patchset install
o SES CPU patch apply
o Standalone OC4J and ADF installation
o Search Modeler installation and configuration
o Configure ERNIE Apps instance to be on valid self-signed SSL certificate
o Import ERNIE SSL certificate into SES and Search Modeler
using aussearchdev initially
rh4 x86, default oracle build
** htop and collectl are open source free performance monitoring packages we utilize**
--start
install htop and collectl
wget http://dag.wieers.com/rpm/packages/htop/htop-0.7-1.el4.rf.i386.rpm
rpm -ivh htop-0.7-1.el4.rf.i386.rpm
wget http://downloads.sourceforge.net/project/collectl/collectl/collectl-3.4.0-4/collectl-3.4.0-4.noarch.rpm?use_mirror=voxel
rpm -ivh collectl-3.4.0-4.noarch.rpm
chkconfig collectl on
service collectl start
**We still need to install the necessary rpms so that collectl logs are compressed
--end
useradd -u 501 oracle
groupadd -g 504 dba
usermod -G 504 oracle
verification:
     [root@aussearchdev ~]# su - oracle
     [oracle@aussearchdev ~]$ id
     uid=501(oracle) gid=501(oracle) groups=501(oracle),504(dba)
passwd oracle
** /mnt/oraclebackup is a network dumpspot we use to hold Software installs, RPMs, etc
** /mnt/rpms is a network dumpspot we use to hold ISOs for OS software such as Redhat Linux
mkdir /mnt/oraclebackup
mkdir /mnt/rpms
add the following to /etc/fstab
XXXXXXX:/patches/oraclebackup /mnt/oraclebackup nfs defaults,hard,nolock 0 0
XXXXXXX:/esxpress/nfs /mnt/rpms nfs rw,addr=XXX.XXX.XXX.XXX 0 0
mount /mnt/rpms
Next need to install various oracle needed RPMs.
cd /mnt/rpms/rh40_upd8/RedHat/RPMS/
rpm -ivh perl-Compress-Zlib-1.42-1.el4.i386.rpm
rpm -ivh libaio-devel-0.3.105-2.i386.rpm
rpm -ivh sysstat-5.0.5-25.el4.i386.rpm
rpm -ivh unixODBC-devel-2.2.11-1.RHEL4.1.i386.rpm
service collectl restart
cd /tmp
wget http://oss.oracle.com/el4/oracle-validated/oracle-validated-1.0.0-18.el4.i386.rpm
rpm -ivh oracle-validated-1.0.0-18.el4.i386.rpm
Now we should have all the RPMs we need.
cd /etc/sysconfig/oracle-validated
./oracle-validated-verify
cd /var/log/oracle-validated/results
more orakernel.log
uname -a
should return 2.6.9 or higher
rpm -qa|grep gcc-
should return 3.4.3 or higher
rpm -qa|grep glibc
should return 2.3.4-2.9 or higher
rpm -qa|grep make
should return 3.80 or higher
rpm -qa|grep binutils
should return 2.15.92.0.2 or higher
rpm -qa|grep openmotif
should return 2.2.3-9.RHEL4.1 or higher
rpm -qa|grep compat-db
should return 4.1.25-9 or higher
rpm -qa|grep setarch
should return 1.6-1 or higher
cat /proc/sys/kernel/sem
should return 250 32000 100 128 or higher (250 32000 100 142 in our case)
cat /proc/sys/kernel/shmall (1073741824 in our case)
should return 2097152 or higher
cat /proc/sys/kernel/shmmax
should return half the size of physical memory (4294967295 in our case - NO LARGER on 32-bit OS)
cat /proc/sys/kernel/shmmni
should return 4096
cat /proc/sys/fs/file-max
should return 65536 (327679 in our case)
cat /proc/sys/net/ipv4/ip_local_port_range
should return 1024 65000
values in /etc/security/limits.conf set by oracle-validated rpm, no changes necessary
add the following line to /etc/pam.d/login
session required /lib/security/pam_limits.so
add the following to /etc/profile
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi
mkdir -p /d01/oracle
chmod 777 /d01/oracle
init 6 the box (aka reboot)
Time to start the SES 10.1.8.2 installer
running SES 10.1.8.2 installer
as oracle
cd /mnt/oraclebackup/deathstar_patches/SES/SES10182
./runInstaller
search server name sesprod
administrative password XXXXXXXX for dev,
http port 7777
destination path /d01/oracle/10.1.8/sesdev (dev)
data storage path /d01/oracle/sesdevdata (dev)
next
inventory /d01/oracle/oraInventory
dba group
run orainstroot.sh as requested
continue
all tests should pass, continue
finished clean
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
Now we need to get to 10.1.8.4 of SES
(yes, you need to keep the system up)
cd /mnt/oraclebackup/deathstar_patches/SES/SES10184/ses_10184pst_linux/
./runInstaller
Destination, choose sesdev
Next
Patchset successful
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
Apply CPU Patch to SES
CPU JAN 10 says patch 9119261 is required - but patch requires extended support contract
CPU OCT 09 says patch 8836540 is required - but patch requires extended support contract
CPU JUL 09 says patch 8534394 is required - but patch requires extended support contract
CPU APR 09 says patch 8290534 is required - and you can actually download it
Need opatch from 6880880
cp -r /mnt/oraclebackup/deathstar_patches/SES/CPUAPR09/OPatch $ORACLE_HOME
export PATH=$ORACLE_HOME/OPatch:$PATH
shut down everything
cd $ORACLE_HOME/bin
./searchctl stopall
cd /mnt/oraclebackup/deathstar_patches/SES/CPUAPR09/8290534
opatch apply
cd $ORACLE_HOME/cpu/CPUApr2009
**Note: your sys password is what you set for your administrative password above
sqlplus "sys/XXXXXX" as sysdba;
startup
@catcpu
@?/rdbms/admin/utlrp
shutdown immediate
exit
cd /d01/oracle/10.1.8/sesdev/cpu/view_recompile/
sqlplus "sys/XXXXXXX" as sysdba;
startup upgrade;
@view_recompile_jan2008cpu.sql
@?/rdbms/admin/utlrp
shutdown immediate
cd /d01/oracle/10.1.8/sesdev/jdk/jre/lib/ext
mv mail.jar $HOME/mail.jar.backup02222010
mv mailapi.jar $HOME/mailapi.jar.back02222010
cp /d01/oracle/10.1.8/sesdev/search/lib/mail.jar .
SES 10.1.8.4 is now installed and updated with latest available CPU
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
we're going to go with the standalone OC4j 10.1.3.3 and Oracle ADF 10.1.3.3 method
The URLs for these products are
http://blogs.oracle.com/ebssearch/2009/10/available_now_oracle_search_modeler_11_for_oracle_e-business_suite_11i.html
and specifically
OC4J - http://download.oracle.com/otn/java/oc4j/101330/oc4j_extended_101330.zip
ADF - http://www.oracle.com/technology/software/products/jdev/htdocs/adfinstaller10133.html
OC4J install
First you need to have Java 1.5 on the machine. Latest is 1.5.0_22. Package is in /mnt/oraclebackup/deathstar_patches/SES
as root on aussearchdev
cd /usr/local
cp /mnt/oraclebackup/deathstar_patches/SES/jdk-1_5_0_22-linux-i586.bin .
chmod 700 jdk-1_5_0_22-linux-i586.bin
./jdk-1_5_0_22-linux-i586.bin
yes
install OC4J just by copying over the directory
as oracle on aussearchdev
mkdir -p /d01/oracle/oc4j
cd /d01/oracle/oc4j
cp -r /mnt/oraclebackup/deathstar_patches/SES/oc4j/* .
ADF install
vi /mnt/oraclebackup/deathstar_patches/SES/adf/adfinstaller.properties
change the following
OracleHome = /mnt/oraclebackup/deathstar_patches/SES/adf
DesHome = /d01/oracle/oc4j/
type = OC4J
as root
cd /usr/bin
rm java
(yes)
ln -s /usr/local/jdk1.5.0_22/bin/java
su - oracle
java -version     should now return 1.5.0_22
export JAVA_HOME=/usr/local/jdk1.5.0_22
cd /mnt/oraclebackup/deathstar_patches/SES/adf
java -jar runinstaller.jar -version
returns The version for the ADF libraries being installed is 10.1.3.41.57 - yes, that is apparently 10.1.3.3.
java -jar runinstaller.jar adfinstaller.properties
output looks good, do not be concerned by
WARNING: 'Could not delete: /d01/oracle/oc4j/BC4J/redist/bc4j' whilst deleting bc4j application
WARNING: 'Could not delete: /d01/oracle/oc4j/BC4J/redist/datatags' whilst deleting datatags application
as it was trying to delete the old version that didn't exist
Start OC4J
as oracle on aussearchdev
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
cd $ORACLE_HOME/bin
./oc4j -start
you will be prompted for password - we're setting it. use XXXXXXXXXX
after it's up, kill it (ctrl-c) and restart it with
nohup ./oc4j -start &
last lines in nohup.out is
Starting OC4J from /d01/oracle/oc4j/j2ee/home ...
10/02/23 03:22:38 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
So now on to search modeler installation, going by Installation steps in Note 781366.1
8326128 - This is not a patch to be applied to the Apps, keep reading
as oracle on aussearchdev
cd /mnt/oraclebackup/deathstar_patches/SES/8326128
mkdir -p /d01/oracle/oc4j/uploaded
vi build.properties, changing
installation.type=OC4J
oracle.home=/d01/oracle/oc4j
deploy.server=aussearchdev.domainname.com
deploy.port=23791
web.port=7777
password=XXXXXXXXX
extra.classpath=/d01/oracle/oc4j/uploaded
now set the following environment values in your ssh session
export ORACLE_HOME=/d01/oracle/oc4j
export JAVA_HOME=/usr/local/jdk1.5.0_22
export PATH=$ORACLE_HOME/ant/bin:$ORACLE_HOME/bin:$PATH
ant main
whole bunch of stuff to screen, errors due to undeploy something that doesn't exist. Finished after a minute with
BUILD SUCCESSFUL
Total time: 58 seconds
Now on to post install steps
restart OC4j
cd $ORACLE_HOME/bin
./modeler.sh -shutdown -port 23791 -password r*l*r*0*
export ORACLE_HOME=/d01/oracle/oc4j
export JAVA_HOME=/usr/local/jdk1.5.0_22
export PATH=$ORACLE_HOME/ant/bin:$ORACLE_HOME/bin:$PATH
nohup ./modeler.sh -start &
end of nohup.out should show
Starting OC4J from /d01/oracle/oc4j/j2ee/home ...
Try going to http://aussearchdev:8888/modeler/faces/ModelerHome.jsp
Should get login screen, but wait, we haven't installed Oracle Apps interface yet...
Next let's do the Apps side of things
Going by note 953378.1
Using ERNIE (a development instance of E-Business Suite running 11.5.10.2 ATG RUP 7)
as applmgr on ausernieapp (ausernieapp is our app tier)
shut down apps services
apps patch 8225631
verify all the pre-req patches are in ERNIE
select * from ad_bugs where bug_number = '5903765';
select * from ad_bugs where bug_number = '6372396';
select * from ad_bugs where bug_number = '3219567';
select * from ad_bugs where bug_number = '3264822';
select * from ad_bugs where bug_number = '3261254';
select * from ad_bugs where bug_number = '5161676';
select * from ad_bugs where bug_number = '3036401';
select * from ad_bugs where bug_number = '3263588';
select * from ad_bugs where bug_number = '3264818';
select * from ad_bugs where bug_number = '3218526';
select * from ad_bugs where bug_number = '3263645';
select * from ad_bugs where bug_number = '4206794';
select * from ad_bugs where bug_number = '3262486';
select * from ad_bugs where bug_number = '3261243';
select * from ad_bugs where bug_number = '2614213';
select * from ad_bugs where bug_number = '3262159';
select * from ad_bugs where bug_number = '2819091';
select * from ad_bugs where bug_number = '3412795';
patch went in smooth
Log in to ERNIE Apps GUI as sysadmin user responsibility
Give users such as sysadmin FND Search Crawler responsibility
Go to system profile options, set
set FND: Search Enabling Flag to Y at site level
as applmgr on ausernieapp
cd /d01/oracle/ernieappl/fnd/11.5.0/patch/115/sql
sqlplus apps/$APPS_PWD @AFSRCHCF
Enter SES endpoint URL [e.g. http://ap637atg.us.oracle.com:7780]: http://aussearchdev.domainname.com:7777
Enter Apps Admin username [e.g. sysadmin]: sysadmin
Enter Apps Admin password: sysadmin_password
Enter SES Admin username [e.g. eqsys]: eqsys
Enter SES Admin password: eqsyspassword <-- This is the same as sys's password
on aussearchdev as oracle
had to kill modeler and start all the processes, so
kill -9 the modeler oc4j process, then
cd $ORACLE_HOME/bin
./searchctl startall
enter the password when prompted
in IE browser go to
http://aussearchdev.domainname.com:7777/search/admin
log in with eqsys password
global settings tab
identity management setup
click circle next to oracle.search.plugin.security.identity.ebs.EBS12IdentityPliginMgr
(yes, we're going with 12 even though we use Oracle Apps 11i)
http end point https://ausernieapp.domainname.com:8443/webservices/AppSearch/SecurityService
username sysadmin
password XXXXXXX
finish
Global Settings
Federation Trusted Entitites
####entity name sysadmin
####Entity Password XXXXXXXX
According to web conference with Oracle, this should NOT be eqsys but instead be sysadmin from above.
Select the Use Entity Plug-in for authentication check box
add
Trying to go to http://aussearchdev.domainname.com:7777/search/query/search and login (sysadmin / password)
stop midtier on both SES and Apps
cd $ORACLE_HOME/bin
./searchctl stopall
./adstpall.sh apps/$APPS_PWD on EBS app tier
start midtier on both SES and Apps
cd $ORACLE_HOME/bin
./searchctl startall
./adstrtal.sh apps/$APPS_PWD on EBS app tier
Now try and log in to Oracle SES user interface to verify the configuration
http://aussearchdev.domainname.com:7777/search/query
Now start up modeler again
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
export PATH=$ORACLE_HOME/bin:$PATH
cd $ORACLE_HOME/bin
nohup ./modeler.sh -start &
Works now.
Now go to http://aussearchdev.domainname.com:8888/modeleradmin/AdminHome.jsp log in as oc4jadmin/XXXXXXX
Configure new target
Target Type 11i
Description ERNIE
Name ERNIE
EBS Database Host Name auserniedb
EBS Database Port 1521
EBS Database SID ERNIE
username apps
password XXXXXXXXx
oc4jadmin XXXXXXXx
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
export PATH=$ORACLE_HOME/bin:$PATH
cd $ORACLE_HOME/j2ee/home
java -jar admin_client.jar deployer:oc4j:aussearchdev oc4jadmin XXXXXXXXX -addDataSourceConnectionPool -name "ERNIE2-pool" -factoryClass "oracle.jdbc.pool.OracleDataSource" -dbUser "apps" -dbPassword "XXXXXXX" -url "jdbc:oracle:thin:@auserniedb.domainname.com:1521:ERNIE" -applicationName appsearch
java -jar admin_client.jar deployer:oc4j:aussearchdev oc4jadmin XXXXXXX -addManagedDataSource -name "ERNIEDS" -jndiLocation "jdbc/ERNIEDS" -connectionPoolName "ERNIE2-pool" -applicationName appsearch
http://aussearchdev.domainname.com:8888/modeler/faces/ModelerHome.jsp
So, creating a self signed SSL certificate for ERNIE EBS instance (this will not work if you use an SSL certificate for another server like say, PROD)
doing this on ausernieapp
openssl genrsa -des3 -out ausernieapp.key 1024
PEM key is ausernieapp
openssl req -new -key ausernieapp.key -out ausernieapp.csr
PEM key is ausernieapp
Country US
State Texas
Locality Austin
Organization Name Corporation
Organizational Unit Name Information Technology
Common Name ausernieapp.domainname.com
Email address [email protected]
No challenge password
No optional company name
Now let's remove the passphrase from the key
cp ausernieapp.key ausernieapp.key.orig
openssl rsa -in ausernieapp.key.orig -out ausernieapp.key
Now let's generate a self-signed certificate
openssl x509 -req -days 1000 -in ausernieapp.csr -signkey ausernieapp.key -out ausernieapp.crt
Install the private key and certificate
cd $IAS_ORACLE_HOME/Apache/Apache/conf/ssl.crt
cp server.crt server.crt.backup.03102010
chown applmgr:applmgr server.crt.backup.03102010
cp $HOME/ausernieapp.crt /d01/oracle/ernieora/new/iAS/Apache/Apache/conf/ssl.crt/server.crt
cd $IAS_ORACLE_HOME/Apache/Apache/conf/ssl.key/
cp server.key server.key.backup.03102010
cp $HOME/ausernieapp.key /d01/oracle/ernieora/new/iAS/Apache/Apache/conf/ssl.key/server.key
chown applmgr:applmgr server.key.backup.03102010
bounce apache as applmgr
cd /d01/oracle/erniecomn/admin/scripts/ERNIE_ausernieapp
./adapcctl.sh stop
./adapcctl.sh start
In IE
https://ausernieapp.domainname.com:8443
Continue
Click on Certificate Error next to URL bar
Install Certificate -> Next-> Place all certificates in the following store -> trusted root certificate authorities ->finish
close browser, back to https://ausernieapp.domainname.com:8443
no errors,
Next step will be to import key into the SES and Search modelers
as oracle on aussearchdev
cd /d01/oracle/10.1.8/sesdev/jdk/jre/lib/security/
cp cacerts cacerts.backup.03102010
scp root@ausernieapp:/root/ausernieapp.crt .
export LANG=c
export PATH=$ORACLE_HOME/jdk/bin:$PATH
keytool -keystore ./cacerts -storepass changeit -alias rootausernieapp -import -trustcacerts -file ausernieapp.crt
--output
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:XX:A6:05:90:F6:XX:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:XX:E1:EA:E4:75:AE:CC:4F:4A:10:2F:8A:FE:9B
Trust this certificate? [no]: yes
Certificate was added to keystore
Now load our cert
keytool -keystore ./cacerts -import -trustcacerts -file ausernieapp.crt
keytool -list -v -keystore ./cacerts now shows
Alias name: rootausernieapp
Creation date: Mar 10, 2010
Entry type: trustedCertEntry
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:CB:XX:05:90:F6:78:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:9C:CE:EA:4E:75:AE:CC:FA:9E:10:2F:8A:FE:9B
Now we need to load it into the search modeler keystore
as root on aussearchdev
export JAVA_HOME=/usr/local/jdk1.5.0_22/
export PATH=$JAVA_HOME/bin:$PATH
cd /usr/local/jdk1.5.0_22/jre/lib/security/
scp root@ausernieapp:/root/ausernieapp.crt .
output
keytool -keystore ./cacerts -import -trustcacerts -file ausernieapp.crt
Enter keystore password: changeit
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:CB:A1:05:90:F6:78:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:9C:CE:EA:4E:75:AE:CC:4F:9E:10:2F:8A:FE:9B
Trust this certificate? [no]: yes
Certificate was added to keystore
[root@aussearchdev security]#
output
For troubleshooting, if you go to end of /d01/oracle/10.1.8/sesdev/search/data/config/crawler.dat
you can modify the logLevel from the default of 4 to 2 to get better debug data. No services need to be restarted, it will become active with the next crawl.
While talking with Oracle, they mentioned the following patches
The patches identified 8321527 and 7586924 are SES patches to help with indexing
They also identified patch 9103851 which is an apps patch dealing with responsibilities <-- This is not yet available
Applying patch 7586924
as oracle on aussearchdev
cd $ORACLE_HOME/bin
./searchctl stopall
cd /mnt/oraclebackup/deathstar_patches/SES/post_patches/7586924
opatch apply
cd $ORACLE_HOME/bin
./searchctl startall
sqlplus eqsys/XXXXXX@SESDEV
define SCH_NAME=EQSYS
define PROXY_USER=EQPROXY
define INST_USER=EQ_TEST
@$ORACLE_HOME/search/admin/eq0pkh.sql
@$ORACLE_HOME/search/admin/eq0plb.sql
@$ORACLE_HOME/search/admin/eq0bug_7586924.sql
cd $ORACLE_HOME/search/data/config/
cp crawler.dat crawler.dat.backup.03102010
vi crawler.dat
We're using the Oracle E-Business Suite R12 crawler, so we will add the line
USE_IN_MEMORY_QUEUE Oracle E-Business Suite R12
as the line immediately preceding IMPORT -
so the end of the file looks like this:
# system properies: separated by space for multiple system properties or define multiple SYSTEM_PROPERTIES
# logLevel values: DEBUG(2), INFO(4), WARN(6), ERROR(8), FATAL(10)
SYSTEM_PROPERTIES -Doracle.search.logLevel=4 -Doracle.search.log=oracle.search.util.Log4jImpl
USE_IN_MEMORY_QUEUE Oracle E-Business Suite R12
IMPORT -
Now on to patch 8321527
cd /mnt/oraclebackup/deathstar_patches/SES/post_patches/8321527
cd $ORACLE_HOME/bin
./searchctl stopall
cd -
opatch apply
cd $ORACLE_HOME/bin
./searchctl startall
sqlplus eqsys/XXXXXXX@SESDEV
define SCH_NAME=EQSYS
define PROXY_USER=EQPROXY
select object_name from user_objects where status = 'INVALID';
--should be no rows selected
@$ORACLE_HOME/search/admin/eq0pkh.sql
@$ORACLE_HOME/search/admin/eq0plb.sql
--should be no rows selected
restart SES
cd -
./searchctl stopall
./searchctl startall

Below are all the steps I took for creating integrating Search Modeler with an Oracle E-Business Suite 11.5.10.2 ATG RUP 7 instance called ERNIE.
Much thanks to Oracle Support ( Rajesh Ghosh, Vikas Soolapani and Roger Ford), as this simply wouldn't have been possible without them.
There are a few things in this document that may not be pertinent to your environment if you're doing this. I've made attempts to clarify those possibly optional sections in the documentation.
I've broken the document down into the following multiple parts
o Setting up a new RedHat 4.8 x86 server called ausSEARCHdev (The server is in AUStin, TX, is dedicated to SEARCH, and is for our DEV environment)
o SES (Secure Enterprise Search 10.1.8.2 install
o SES 10.1.8.4 patchset install
o SES CPU patch apply
o Standalone OC4J and ADF installation
o Search Modeler installation and configuration
o Configure ERNIE Apps instance to be on valid self-signed SSL certificate
o Import ERNIE SSL certificate into SES and Search Modeler
using aussearchdev initially
rh4 x86, default oracle build
** htop and collectl are open source free performance monitoring packages we utilize**
--start
install htop and collectl
wget http://dag.wieers.com/rpm/packages/htop/htop-0.7-1.el4.rf.i386.rpm
rpm -ivh htop-0.7-1.el4.rf.i386.rpm
wget http://downloads.sourceforge.net/project/collectl/collectl/collectl-3.4.0-4/collectl-3.4.0-4.noarch.rpm?use_mirror=voxel
rpm -ivh collectl-3.4.0-4.noarch.rpm
chkconfig collectl on
service collectl start
**We still need to install the necessary rpms so that collectl logs are compressed
--end
useradd -u 501 oracle
groupadd -g 504 dba
usermod -G 504 oracle
verification:
     [root@aussearchdev ~]# su - oracle
     [oracle@aussearchdev ~]$ id
     uid=501(oracle) gid=501(oracle) groups=501(oracle),504(dba)
passwd oracle
** /mnt/oraclebackup is a network dumpspot we use to hold Software installs, RPMs, etc
** /mnt/rpms is a network dumpspot we use to hold ISOs for OS software such as Redhat Linux
mkdir /mnt/oraclebackup
mkdir /mnt/rpms
add the following to /etc/fstab
XXXXXXX:/patches/oraclebackup /mnt/oraclebackup nfs defaults,hard,nolock 0 0
XXXXXXX:/esxpress/nfs /mnt/rpms nfs rw,addr=XXX.XXX.XXX.XXX 0 0
mount /mnt/rpms
Next need to install various oracle needed RPMs.
cd /mnt/rpms/rh40_upd8/RedHat/RPMS/
rpm -ivh perl-Compress-Zlib-1.42-1.el4.i386.rpm
rpm -ivh libaio-devel-0.3.105-2.i386.rpm
rpm -ivh sysstat-5.0.5-25.el4.i386.rpm
rpm -ivh unixODBC-devel-2.2.11-1.RHEL4.1.i386.rpm
service collectl restart
cd /tmp
wget http://oss.oracle.com/el4/oracle-validated/oracle-validated-1.0.0-18.el4.i386.rpm
rpm -ivh oracle-validated-1.0.0-18.el4.i386.rpm
Now we should have all the RPMs we need.
cd /etc/sysconfig/oracle-validated
./oracle-validated-verify
cd /var/log/oracle-validated/results
more orakernel.log
uname -a
should return 2.6.9 or higher
rpm -qa|grep gcc-
should return 3.4.3 or higher
rpm -qa|grep glibc
should return 2.3.4-2.9 or higher
rpm -qa|grep make
should return 3.80 or higher
rpm -qa|grep binutils
should return 2.15.92.0.2 or higher
rpm -qa|grep openmotif
should return 2.2.3-9.RHEL4.1 or higher
rpm -qa|grep compat-db
should return 4.1.25-9 or higher
rpm -qa|grep setarch
should return 1.6-1 or higher
cat /proc/sys/kernel/sem
should return 250 32000 100 128 or higher (250 32000 100 142 in our case)
cat /proc/sys/kernel/shmall (1073741824 in our case)
should return 2097152 or higher
cat /proc/sys/kernel/shmmax
should return half the size of physical memory (4294967295 in our case - NO LARGER on 32-bit OS)
cat /proc/sys/kernel/shmmni
should return 4096
cat /proc/sys/fs/file-max
should return 65536 (327679 in our case)
cat /proc/sys/net/ipv4/ip_local_port_range
should return 1024 65000
values in /etc/security/limits.conf set by oracle-validated rpm, no changes necessary
add the following line to /etc/pam.d/login
session required /lib/security/pam_limits.so
add the following to /etc/profile
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi
mkdir -p /d01/oracle
chmod 777 /d01/oracle
init 6 the box (aka reboot)
Time to start the SES 10.1.8.2 installer
running SES 10.1.8.2 installer
as oracle
cd /mnt/oraclebackup/deathstar_patches/SES/SES10182
./runInstaller
search server name sesprod
administrative password XXXXXXXX for dev,
http port 7777
destination path /d01/oracle/10.1.8/sesdev (dev)
data storage path /d01/oracle/sesdevdata (dev)
next
inventory /d01/oracle/oraInventory
dba group
run orainstroot.sh as requested
continue
all tests should pass, continue
finished clean
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
Now we need to get to 10.1.8.4 of SES
(yes, you need to keep the system up)
cd /mnt/oraclebackup/deathstar_patches/SES/SES10184/ses_10184pst_linux/
./runInstaller
Destination, choose sesdev
Next
Patchset successful
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
Apply CPU Patch to SES
CPU JAN 10 says patch 9119261 is required - but patch requires extended support contract
CPU OCT 09 says patch 8836540 is required - but patch requires extended support contract
CPU JUL 09 says patch 8534394 is required - but patch requires extended support contract
CPU APR 09 says patch 8290534 is required - and you can actually download it
Need opatch from 6880880
cp -r /mnt/oraclebackup/deathstar_patches/SES/CPUAPR09/OPatch $ORACLE_HOME
export PATH=$ORACLE_HOME/OPatch:$PATH
shut down everything
cd $ORACLE_HOME/bin
./searchctl stopall
cd /mnt/oraclebackup/deathstar_patches/SES/CPUAPR09/8290534
opatch apply
cd $ORACLE_HOME/cpu/CPUApr2009
**Note: your sys password is what you set for your administrative password above
sqlplus "sys/XXXXXX" as sysdba;
startup
@catcpu
@?/rdbms/admin/utlrp
shutdown immediate
exit
cd /d01/oracle/10.1.8/sesdev/cpu/view_recompile/
sqlplus "sys/XXXXXXX" as sysdba;
startup upgrade;
@view_recompile_jan2008cpu.sql
@?/rdbms/admin/utlrp
shutdown immediate
cd /d01/oracle/10.1.8/sesdev/jdk/jre/lib/ext
mv mail.jar $HOME/mail.jar.backup02222010
mv mailapi.jar $HOME/mailapi.jar.back02222010
cp /d01/oracle/10.1.8/sesdev/search/lib/mail.jar .
SES 10.1.8.4 is now installed and updated with latest available CPU
tried logging in to admin console at http://aussearchdev:7777/search/admin - worked fine
tried bringing up search query at http://aussearchdev:7777/search/query/search - worked fine
we're going to go with the standalone OC4j 10.1.3.3 and Oracle ADF 10.1.3.3 method
The URLs for these products are
http://blogs.oracle.com/ebssearch/2009/10/available_now_oracle_search_modeler_11_for_oracle_e-business_suite_11i.html
and specifically
OC4J - http://download.oracle.com/otn/java/oc4j/101330/oc4j_extended_101330.zip
ADF - http://www.oracle.com/technology/software/products/jdev/htdocs/adfinstaller10133.html
OC4J install
First you need to have Java 1.5 on the machine. Latest is 1.5.0_22. Package is in /mnt/oraclebackup/deathstar_patches/SES
as root on aussearchdev
cd /usr/local
cp /mnt/oraclebackup/deathstar_patches/SES/jdk-1_5_0_22-linux-i586.bin .
chmod 700 jdk-1_5_0_22-linux-i586.bin
./jdk-1_5_0_22-linux-i586.bin
yes
install OC4J just by copying over the directory
as oracle on aussearchdev
mkdir -p /d01/oracle/oc4j
cd /d01/oracle/oc4j
cp -r /mnt/oraclebackup/deathstar_patches/SES/oc4j/* .
ADF install
vi /mnt/oraclebackup/deathstar_patches/SES/adf/adfinstaller.properties
change the following
OracleHome = /mnt/oraclebackup/deathstar_patches/SES/adf
DesHome = /d01/oracle/oc4j/
type = OC4J
as root
cd /usr/bin
rm java
(yes)
ln -s /usr/local/jdk1.5.0_22/bin/java
su - oracle
java -version     should now return 1.5.0_22
export JAVA_HOME=/usr/local/jdk1.5.0_22
cd /mnt/oraclebackup/deathstar_patches/SES/adf
java -jar runinstaller.jar -version
returns The version for the ADF libraries being installed is 10.1.3.41.57 - yes, that is apparently 10.1.3.3.
java -jar runinstaller.jar adfinstaller.properties
output looks good, do not be concerned by
WARNING: 'Could not delete: /d01/oracle/oc4j/BC4J/redist/bc4j' whilst deleting bc4j application
WARNING: 'Could not delete: /d01/oracle/oc4j/BC4J/redist/datatags' whilst deleting datatags application
as it was trying to delete the old version that didn't exist
Start OC4J
as oracle on aussearchdev
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
cd $ORACLE_HOME/bin
./oc4j -start
you will be prompted for password - we're setting it. use XXXXXXXXXX
after it's up, kill it (ctrl-c) and restart it with
nohup ./oc4j -start &
last lines in nohup.out is
Starting OC4J from /d01/oracle/oc4j/j2ee/home ...
10/02/23 03:22:38 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
So now on to search modeler installation, going by Installation steps in Note 781366.1
8326128 - This is not a patch to be applied to the Apps, keep reading
as oracle on aussearchdev
cd /mnt/oraclebackup/deathstar_patches/SES/8326128
mkdir -p /d01/oracle/oc4j/uploaded
vi build.properties, changing
installation.type=OC4J
oracle.home=/d01/oracle/oc4j
deploy.server=aussearchdev.domainname.com
deploy.port=23791
web.port=7777
password=XXXXXXXXX
extra.classpath=/d01/oracle/oc4j/uploaded
now set the following environment values in your ssh session
export ORACLE_HOME=/d01/oracle/oc4j
export JAVA_HOME=/usr/local/jdk1.5.0_22
export PATH=$ORACLE_HOME/ant/bin:$ORACLE_HOME/bin:$PATH
ant main
whole bunch of stuff to screen, errors due to undeploy something that doesn't exist. Finished after a minute with
BUILD SUCCESSFUL
Total time: 58 seconds
Now on to post install steps
restart OC4j
cd $ORACLE_HOME/bin
./modeler.sh -shutdown -port 23791 -password r*l*r*0*
export ORACLE_HOME=/d01/oracle/oc4j
export JAVA_HOME=/usr/local/jdk1.5.0_22
export PATH=$ORACLE_HOME/ant/bin:$ORACLE_HOME/bin:$PATH
nohup ./modeler.sh -start &
end of nohup.out should show
Starting OC4J from /d01/oracle/oc4j/j2ee/home ...
Try going to http://aussearchdev:8888/modeler/faces/ModelerHome.jsp
Should get login screen, but wait, we haven't installed Oracle Apps interface yet...
Next let's do the Apps side of things
Going by note 953378.1
Using ERNIE (a development instance of E-Business Suite running 11.5.10.2 ATG RUP 7)
as applmgr on ausernieapp (ausernieapp is our app tier)
shut down apps services
apps patch 8225631
verify all the pre-req patches are in ERNIE
select * from ad_bugs where bug_number = '5903765';
select * from ad_bugs where bug_number = '6372396';
select * from ad_bugs where bug_number = '3219567';
select * from ad_bugs where bug_number = '3264822';
select * from ad_bugs where bug_number = '3261254';
select * from ad_bugs where bug_number = '5161676';
select * from ad_bugs where bug_number = '3036401';
select * from ad_bugs where bug_number = '3263588';
select * from ad_bugs where bug_number = '3264818';
select * from ad_bugs where bug_number = '3218526';
select * from ad_bugs where bug_number = '3263645';
select * from ad_bugs where bug_number = '4206794';
select * from ad_bugs where bug_number = '3262486';
select * from ad_bugs where bug_number = '3261243';
select * from ad_bugs where bug_number = '2614213';
select * from ad_bugs where bug_number = '3262159';
select * from ad_bugs where bug_number = '2819091';
select * from ad_bugs where bug_number = '3412795';
patch went in smooth
Log in to ERNIE Apps GUI as sysadmin user responsibility
Give users such as sysadmin FND Search Crawler responsibility
Go to system profile options, set
set FND: Search Enabling Flag to Y at site level
as applmgr on ausernieapp
cd /d01/oracle/ernieappl/fnd/11.5.0/patch/115/sql
sqlplus apps/$APPS_PWD @AFSRCHCF
Enter SES endpoint URL [e.g. http://ap637atg.us.oracle.com:7780]: http://aussearchdev.domainname.com:7777
Enter Apps Admin username [e.g. sysadmin]: sysadmin
Enter Apps Admin password: sysadmin_password
Enter SES Admin username [e.g. eqsys]: eqsys
Enter SES Admin password: eqsyspassword <-- This is the same as sys's password
on aussearchdev as oracle
had to kill modeler and start all the processes, so
kill -9 the modeler oc4j process, then
cd $ORACLE_HOME/bin
./searchctl startall
enter the password when prompted
in IE browser go to
http://aussearchdev.domainname.com:7777/search/admin
log in with eqsys password
global settings tab
identity management setup
click circle next to oracle.search.plugin.security.identity.ebs.EBS12IdentityPliginMgr
(yes, we're going with 12 even though we use Oracle Apps 11i)
http end point https://ausernieapp.domainname.com:8443/webservices/AppSearch/SecurityService
username sysadmin
password XXXXXXX
finish
Global Settings
Federation Trusted Entitites
####entity name sysadmin
####Entity Password XXXXXXXX
According to web conference with Oracle, this should NOT be eqsys but instead be sysadmin from above.
Select the Use Entity Plug-in for authentication check box
add
Trying to go to http://aussearchdev.domainname.com:7777/search/query/search and login (sysadmin / password)
stop midtier on both SES and Apps
cd $ORACLE_HOME/bin
./searchctl stopall
./adstpall.sh apps/$APPS_PWD on EBS app tier
start midtier on both SES and Apps
cd $ORACLE_HOME/bin
./searchctl startall
./adstrtal.sh apps/$APPS_PWD on EBS app tier
Now try and log in to Oracle SES user interface to verify the configuration
http://aussearchdev.domainname.com:7777/search/query
Now start up modeler again
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
export PATH=$ORACLE_HOME/bin:$PATH
cd $ORACLE_HOME/bin
nohup ./modeler.sh -start &
Works now.
Now go to http://aussearchdev.domainname.com:8888/modeleradmin/AdminHome.jsp log in as oc4jadmin/XXXXXXX
Configure new target
Target Type 11i
Description ERNIE
Name ERNIE
EBS Database Host Name auserniedb
EBS Database Port 1521
EBS Database SID ERNIE
username apps
password XXXXXXXXx
oc4jadmin XXXXXXXx
export JAVA_HOME=/usr/local/jdk1.5.0_22
export ORACLE_HOME=/d01/oracle/oc4j
export PATH=$ORACLE_HOME/bin:$PATH
cd $ORACLE_HOME/j2ee/home
java -jar admin_client.jar deployer:oc4j:aussearchdev oc4jadmin XXXXXXXXX -addDataSourceConnectionPool -name "ERNIE2-pool" -factoryClass "oracle.jdbc.pool.OracleDataSource" -dbUser "apps" -dbPassword "XXXXXXX" -url "jdbc:oracle:thin:@auserniedb.domainname.com:1521:ERNIE" -applicationName appsearch
java -jar admin_client.jar deployer:oc4j:aussearchdev oc4jadmin XXXXXXX -addManagedDataSource -name "ERNIEDS" -jndiLocation "jdbc/ERNIEDS" -connectionPoolName "ERNIE2-pool" -applicationName appsearch
http://aussearchdev.domainname.com:8888/modeler/faces/ModelerHome.jsp
So, creating a self signed SSL certificate for ERNIE EBS instance (this will not work if you use an SSL certificate for another server like say, PROD)
doing this on ausernieapp
openssl genrsa -des3 -out ausernieapp.key 1024
PEM key is ausernieapp
openssl req -new -key ausernieapp.key -out ausernieapp.csr
PEM key is ausernieapp
Country US
State Texas
Locality Austin
Organization Name Corporation
Organizational Unit Name Information Technology
Common Name ausernieapp.domainname.com
Email address [email protected]
No challenge password
No optional company name
Now let's remove the passphrase from the key
cp ausernieapp.key ausernieapp.key.orig
openssl rsa -in ausernieapp.key.orig -out ausernieapp.key
Now let's generate a self-signed certificate
openssl x509 -req -days 1000 -in ausernieapp.csr -signkey ausernieapp.key -out ausernieapp.crt
Install the private key and certificate
cd $IAS_ORACLE_HOME/Apache/Apache/conf/ssl.crt
cp server.crt server.crt.backup.03102010
chown applmgr:applmgr server.crt.backup.03102010
cp $HOME/ausernieapp.crt /d01/oracle/ernieora/new/iAS/Apache/Apache/conf/ssl.crt/server.crt
cd $IAS_ORACLE_HOME/Apache/Apache/conf/ssl.key/
cp server.key server.key.backup.03102010
cp $HOME/ausernieapp.key /d01/oracle/ernieora/new/iAS/Apache/Apache/conf/ssl.key/server.key
chown applmgr:applmgr server.key.backup.03102010
bounce apache as applmgr
cd /d01/oracle/erniecomn/admin/scripts/ERNIE_ausernieapp
./adapcctl.sh stop
./adapcctl.sh start
In IE
https://ausernieapp.domainname.com:8443
Continue
Click on Certificate Error next to URL bar
Install Certificate -> Next-> Place all certificates in the following store -> trusted root certificate authorities ->finish
close browser, back to https://ausernieapp.domainname.com:8443
no errors,
Next step will be to import key into the SES and Search modelers
as oracle on aussearchdev
cd /d01/oracle/10.1.8/sesdev/jdk/jre/lib/security/
cp cacerts cacerts.backup.03102010
scp root@ausernieapp:/root/ausernieapp.crt .
export LANG=c
export PATH=$ORACLE_HOME/jdk/bin:$PATH
keytool -keystore ./cacerts -storepass changeit -alias rootausernieapp -import -trustcacerts -file ausernieapp.crt
--output
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:XX:A6:05:90:F6:XX:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:XX:E1:EA:E4:75:AE:CC:4F:4A:10:2F:8A:FE:9B
Trust this certificate? [no]: yes
Certificate was added to keystore
Now load our cert
keytool -keystore ./cacerts -import -trustcacerts -file ausernieapp.crt
keytool -list -v -keystore ./cacerts now shows
Alias name: rootausernieapp
Creation date: Mar 10, 2010
Entry type: trustedCertEntry
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:CB:XX:05:90:F6:78:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:9C:CE:EA:4E:75:AE:CC:FA:9E:10:2F:8A:FE:9B
Now we need to load it into the search modeler keystore
as root on aussearchdev
export JAVA_HOME=/usr/local/jdk1.5.0_22/
export PATH=$JAVA_HOME/bin:$PATH
cd /usr/local/jdk1.5.0_22/jre/lib/security/
scp root@ausernieapp:/root/ausernieapp.crt .
output
keytool -keystore ./cacerts -import -trustcacerts -file ausernieapp.crt
Enter keystore password: changeit
Owner: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Issuer: [email protected], CN=ausernieapp.domainname.com, OU=Information Technology, O=Corporation, L=Austin, ST=Texas, C=US
Serial number: b4e92089cf73076f
Valid from: Wed Mar 10 13:22:38 CST 2010 until: Tue Dec 04 13:22:38 CST 2012
Certificate fingerprints:
MD5: 2C:6B:EE:1A:63:6D:CB:A1:05:90:F6:78:DD:88:F7:80
SHA1: F8:DC:E5:2A:3E:68:9C:CE:EA:4E:75:AE:CC:4F:9E:10:2F:8A:FE:9B
Trust this certificate? [no]: yes
Certificate was added to keystore
[root@aussearchdev security]#
output
For troubleshooting, if you go to end of /d01/oracle/10.1.8/sesdev/search/data/config/crawler.dat
you can modify the logLevel from the default of 4 to 2 to get better debug data. No services need to be restarted, it will become active with the next crawl.
While talking with Oracle, they mentioned the following patches
The patches identified 8321527 and 7586924 are SES patches to help with indexing
They also identified patch 9103851 which is an apps patch dealing with responsibilities <-- This is not yet available
Applying patch 7586924
as oracle on aussearchdev
cd $ORACLE_HOME/bin
./searchctl stopall
cd /mnt/oraclebackup/deathstar_patches/SES/post_patches/7586924
opatch apply
cd $ORACLE_HOME/bin
./searchctl startall
sqlplus eqsys/XXXXXX@SESDEV
define SCH_NAME=EQSYS
define PROXY_USER=EQPROXY
define INST_USER=EQ_TEST
@$ORACLE_HOME/search/admin/eq0pkh.sql
@$ORACLE_HOME/search/admin/eq0plb.sql
@$ORACLE_HOME/search/admin/eq0bug_7586924.sql
cd $ORACLE_HOME/search/data/config/
cp crawler.dat crawler.dat.backup.03102010
vi crawler.dat
We're using the Oracle E-Business Suite R12 crawler, so we will add the line
USE_IN_MEMORY_QUEUE Oracle E-Business Suite R12
as the line immediately preceding IMPORT -
so the end of the file looks like this:
# system properies: separated by space for multiple system properties or define multiple SYSTEM_PROPERTIES
# logLevel values: DEBUG(2), INFO(4), WARN(6), ERROR(8), FATAL(10)
SYSTEM_PROPERTIES -Doracle.search.logLevel=4 -Doracle.search.log=oracle.search.util.Log4jImpl
USE_IN_MEMORY_QUEUE Oracle E-Business Suite R12
IMPORT -
Now on to patch 8321527
cd /mnt/oraclebackup/deathstar_patches/SES/post_patches/8321527
cd $ORACLE_HOME/bin
./searchctl stopall
cd -
opatch apply
cd $ORACLE_HOME/bin
./searchctl startall
sqlplus eqsys/XXXXXXX@SESDEV
define SCH_NAME=EQSYS
define PROXY_USER=EQPROXY
select object_name from user_objects where status = 'INVALID';
--should be no rows selected
@$ORACLE_HOME/search/admin/eq0pkh.sql
@$ORACLE_HOME/search/admin/eq0plb.sql
--should be no rows selected
restart SES
cd -
./searchctl stopall
./searchctl startall

No bluray for my hp pavillon dv6700 with mat**bleep**a bd-cmb uj-120 ata

Similar Messages

Maybe you are looking for

No bluray for my hp pavillon dv6700 with matbleepa bd-cmb uj-120 ata