No BOM or BS found in B1 payload, check your BIU xsl

i have created b1POtob1so with the intre gration bisn tool
i got the message from message log . what should i do.
com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception: com.sap.b1i.utilities.UtilException: UTE001 Nested exception: com.sap.engine.lib.xml.util.NestedException: BIDI_Wrapper.xsl exception: No BOM or BS found in B1 payload, check your BIU xsl.
please explain.

Hi all,
I am also facing the same problem in case of User Define Table..
Can anybody help me out...

Similar Messages

Error: No BOM or BS found in B1 payload, check your BIU xsl

Hi All,
I have just started on B1iSN for 8.8 and transferring data from one UDT to other in inter company.
I am getting the following error in Log monitor -
com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception: com.sap.b1i.utilities.UtilException: UTE001 Nested exception: com.sap.engine.lib.xml.util.NestedException: Exception while sending warning -> javax.xml.transform.TransformerException: BIDI_Wrapper.xsl exception: No BOM or BS found in B1 payload, check your BIU xsl.
Kindly help
Deep Kulshrestha
Edited by: Deep Kulshrestha on Mar 15, 2011 8:58 AM

Hi,
Can you please tell me what changes you made to resolved same error.
Thanks
Kevin

No active writeable datasource found for user creation, check your Persiste

HI SAP Guru's
Suddenly when I am login in Portal with J2EE_ADMIN or any user , I am getting error
You are not authorized to access this application; contact your system administrator
and when I am going to create user in identity management I am getting below error
Current user has user creation permissions in the UME, but cannot create users in the back-end system (data source). The original and possibly untranslated message was: "No active writeable datasource found for user creation, check your Persistence Configuration.".
I have searched all related treads in SDN but no success
Please help.
Thanks & Regards
Vinay Patel

Dear all,
I was searching the community because I had this same error and there was no answer of how it was fixed. So I'm sending how I fixed today in a customer environment.
1. Go to portal http://<portal>/webdynpro/dispatcher/sap.com/tcsecumewdumeadmin/UmeAdminApp
- select configuration
- folder "sap system based in abap"
- do the conection test
If the test fails, log on in client 001 and change user SAPJSF:
- assign role SAP_BC_JSF_COMMUNICATION (only this one) and one profile that has permission to RFC logon
- you can change the password too
STOP/START ABAP+JAVA
Go again to the portal above and test connection again. The tests should now be OK.
2. Go to portal http://<portal>/irj
- Log on with administrator user
Now you should be able to create an user.

Can someone explain error code DW020 - conflicts found in selected payloads?

Our laptop's hard drive failed. I don't believe Master Collection 5.5 was unregistered and uninstalled prior to the failure. I am attempting to put the software on another laptop and encounter the following errors: DS013, Fatal DW020, about conflicts found in selected payloads and flash player 10 Active X.
How can I get our license cleared up? Or what other error might I be having? Thanks.

was that exit code 6? if so, Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5

No valid BOM could be found

After costing i have got some errors for some of the materials..
FOr a material A, the error is No valid BOM could be found for material B( here B is a component of A).
Like this for many materials,many errors..
Some of the materials are with HALb and some are ROH...
If its only halb,THen i could get a reason... but it s having ROH also..
Please help me out in understanding..

Hi,
You are running the cost estimate of a finished product which finally comes out based on some raw materials and semi finished goods from a Production Order. This cost estimate is linked to a costing sheet which calculates the raw material consumed
for production and its production cost. These costs are settled through the cost component structure OKTZ. Each of the
production order is linked to Bill of Materials that is all those materials which are required for production and the production
process operations are defined in Routing. Each of these production orders carries a costing variant planned and costing variant actual to calculate the cost. The costing variant has its own attributes like valuation variant, date control etc. The valuation variant defines in what sequence the material has to be valuated and the costing sheet is assigned to this valuation variant for the plant.
Further, BOM usage and routing are assigned in the valuation variant.
The valuation variant checks the materials during your costing run, to take the price and whether it is one of the component in
the bill of materials for the production order. Hence during costing run if the materials is not one of the component in BOM, it cannot
run the cost estimate properly.
Best Regards,
Sadashivan

Error Message: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. The request failed with HTTP status 404: Not Found.

I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control. I have set the ReportPath and ReportServerUrl correctly. I am
getting an error message.
Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account?
I am getting the following error message:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.

Hi bucaroov,
The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
Please follow these steps to solve the issue:
Logon the Report Server machine.
Open the Reporting Services Configuration Manager.
Copy the Report Server URL from 'Web Services URL'.
Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
not available, could you please post the error message.
Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
For more information, please see:
Walkthrough: Using the ReportViewer Control in Remote Mode:
http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

CRM 5.0 Billing - 'No data found..................check your input' message

Hi everyone,
I am facing this message :
"No data found for the criteria specified - check your input'
This occurs when : (CRM Billing)
1.
I try the step "Maintain Billing due list',punch in a 'Billing Type' and hit Maintain(F8)
- I get the above message & it does not show my released document number to proceed further w/ Individual or Collective Billing.
2.
I try the step "Maintain Billing due list',punch in a 'Billing Type' and error free "Service Order' or a 'Service Confirmation' document number that is released.
- I get the above message & it does not show my released document number to proceed further w/ Individual or Collective Billing.
Background:
I am working on a CRM Service scenario of Service Order to billing and another Service Order to Confirmation to Billing scenario.
I have done a check of the prerequistes: (Input Processing)
Billing type, item category, item category determination etc - looks perfect.
Anybody facing similar situations & got to the problem, would greatly appreciate your wisdom for the benefit of all .
(any threads, SAP Notes, documentation, pointers , soulations would be appreciated)
Will reward points generously !!!
cheers,
Sam V

Hi Sam,
What he meant was: did you go to txcode: CRM_SRVBIL to release the transaction for billing purpose.
This has to be done before your billing due list are filled with the billable items.
regards,
anthony

How can you change your line access selection? I have found where you can change your plan selection, but can you change the line access fee or is that a set amount?

How can you change your line access selection? I have found where you can change your plan selection, but can you change the line access fee or is that a set amount?

DIVAB71,
Great question. The line access fees for the account are a set amount and can not be changed unless you are going from a basic to a smartphone or vice versa. If you are wondering about adding the month to month discount if you are out of contract Ann154 has provided great information on how to access and add the feature.
LindseyT_VZW
Follow us on Twitter @VZWSupport

Sequence 0 operation not found in order 800000036870, check entry

Hi experts,
I am facing the problem first time. when I go for order confirmation at operation through CO11n then as i enter the order number system gives me the error Sequence 0 operation not found in order 800000036870, check entry.
Regards

Dear Anil,
Your initial query is different form query you posted to our replies
As per your initial query what is replied is correct ( it is regrding operation number )
Now as ur latest query it is confirmation number
Yes one order can have different confirmation numbers
Just check in CO14 or COOIS
in COOIS in list make it as confirmations & execute
Hope it clarifies
Regards
Madhu

Customers found with same address; check Message f2145

Hi All,
I just wanted to tell you my requirement Ex. suppose i have customer with 2 different address and user want to create 2 customer code with 2 different address and 1 customer is already in sap and user want to create another code with same name but address will be different......at the time is user enter the Name Field system given error "Customers found with same address; check". I have gone through the post but i did not get solution.
Please provide me solution.
Regards,
Abhijeet

Hello,
follow the menù path SPRO --> Financial Accounting (New) --> Accounts Receivable and Accounts Payable --> Customer Accounts --> Master Data --> Preparations for Creating Customer Master Data --> Change Message Control for Customer Master Data" enter ther error message nummber 145 and set it as a warning (W) or switch it off. Refer to the documentation of the customizing task for more information.
Best regards,
Andrea

No Internet connection was found. Please check your Internet settings or firewall.

When I try to update I get this message:
"No Internet connection was found. Please check your Internet settings or firewall."
and porgram won't update.
I tried "fixes" offered on ADOBE website to no avail.
Anyone know how to fix this ?
1 minute of silence for that awesome forum that ADOBE was....sniff sniff

ADOBE tech "support" isn't of much use in this. They suggest me to manually update. I know CS3 is fixed update not requiring more download after 3.2, but my updater used to run fine and now it doesn't on a freesh computer install. I'd like to fix this cause this is an indicator that something is wrong on my computer.
The only advice I got after 15-20 minutes was to check permissions on my computer, that this might be cause of it.
I put permission on my firewall to all adobe program I could find on my computer, turned off UAC doesn't work; tried firewall + spyware + antivirus to zero protection = doesn't work either.
I've read that been plugged into a router on a 2 computers network can cause problem. How ? I know Adobe Updater doesn't support proxy server.
http://kb2.adobe.com/cps/331/331931.html
I tried puggin directly into modem and didn't change anything. I think maybe that my main computer might be blocking or filtering my internet connection or a setup in it: I don't know networking setup at all.
Maybe it's windows vista on my computer that has updated to something that would block my adobe updater.
Any suggestion ?
Thank you.

How to resolve: "Update server not found (check your internet connection)"?

When doing Help / Check for Updates, I get "Update server not found (check your internet connection)". This has been the case for 6-8 weeks or longer but auto update worked fine before. Not sure if something changed on my MacBook Pro. If so, I can't pinpoint it.
MacBook Pro (Intel Core 2 Duo)
Mac OS 10.6.6
Firefox 3.6.13
Firefox set to "No Proxy"

See iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - Disable your firewall and anitvirus software temporarily. Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

network path could not be found. Check your spelling or try a different path.

Hi everyone,
I am having problems with Office programs not saving on a network drive. It is displaying this error: <network path> could not be found. Check your spelling or try a different path.
This happens on subfolders only, so if I try saving a file to the root folder, it works. But as soon as I want to save it to a subfolder this happens.
In this sub folder I can find .TMP file and an empty, 0kb Word/Exel file with that name. If I do the save process again, it only asks me to replace the file and save is done no problem. Shared folder is on SBS 2011 and client computers are running Windows
7. It happens to any version of Office (2007, 2010 and 2013).
Can you help me out guys?
Thank you
Vlastimir Sindelic

We are facing the same exact problem but let me give more details to our issue that we are facing. Few users of ours use to access a shared drive (mapped on their computers) and open any file without any problem. Now, when they
try to open a file they are getting the error message "u:\shared\file.ext cannot be found. Check your spelling, or try a different path". After doing some investigation it seems that this error is really saying that someone has the file open. Users
got this error message only if the file is opened by another user. They will be able to open it as soon as the other user closes it. It's suppose to give a notification of "read only" rather than giving this error message "file name" cannot
be found. Check your spelling, or try a different path".
If we manually browse to the path and open the file which is already opened by another user we get the error message we expect to see "read only" message. It's just that when we go from a mapped path the error is "u:\shared\file.ext
cannot be found. Check your spelling, or try a different path" which is not a true error. This is related to office we have already tested that out but have not been able to fix. Please advise.

Material in two plants, I run MRP with the BOM is not found in prod plant

Hi all,
I have plant 1020 material 12345
Plant 1020 is the production plant for material 12345
The material 12345 exists in plant 1070.
The material 12345 in plant 1070 has no MRP.
Plant 1020 material 12345 config in MM03
MRP1 --> MRP Type = PD
MRP1 --> MRP Controller = G03
MRP3 --> Planning material = PLAN_1020_GR03
MRP3 --> Planning plant = 1020
Plant 1070 material 12345 config in MM03
MRP1 --> MRP Type = P3
MRP1 --> MRP Controller = 017
MRP3 --> Planning material = empty
MRP3 --> Planning plant = empty
The BOM in cs11 for plant 1020 material 12345
has 3 components
Comp#1
Comp#2
Comp#3
The Dependency is code
TABLE TB_1020_SUPERBOM (PP_nuance_interne = $ROOT.PP_nuance_interne,
PP_dim_billette_bom = $ROOT.PP_dim_billette_bom,
PP_CODE_LONG_BILL = $ROOT.PP_CODE_LONG_BILL,
pp_component_bom =$self.pp_component_bom).
The dependency is not found because it is looking for it in the plant 1070 and not the plant 1020.
When the MRP runs for a Delivery type stock transfer order I get
CONFIG_1020_BILLET <---- This is the BOM item component field in CS11 in the Basic data tab
Comp#2
Comp#3
instead of
Comp#1
Comp#2
Comp#3
When I run MRP for the same material, if there's no
"Delivery based on Stock transfert orders" the MRP associates the correct components
Hope this explains m'I situation.
Regards!
Curtis

Hi,
If you want a reply in one line, it would be SAP R/3 does not supoort this feature.
You will have to go for APO module.
There are few things which can be done in R/3 side, as in maintaining a scope for MRP run in OM0E, maintaining special procurement key etc etc, but all these will not do any check of stock in another plant & can only help in a very limited way if all any for your specific need.
But SAP R/3 provides a cross plant evaluation via MD48 to know the stock & demands at all plants, this can help only for evaluation purpose.
Hope it clarifies.
Regards,
Vivek

I downloaded 3.6.8 and found Win32.Cherche.us in module plugin-containers.exe in mozilla firefox directory. i now have many network computers to clean and a lot of work, check your files

I started installing 3.6.8 several network computers. When I started firefox, I got the message from spybot that Win32.Cherche.us was found in file plugin-container.exe in the mozilla firefox directory. This is a rootkit and I will probably to re install/clean at least 4 or 5 virtual/real machines. This will be a lot of work on a weekend when I just wanted to rest
== This happened ==
Not sure how often
== I installed 3.6.9

Could an admin or mod please answer.
I have a serious question to ask that only they could answer.
Thank You
Anak
btw, here's that screenshot

No BOM or BS found in B1 payload, check your BIU xsl

Similar Messages

Maybe you are looking for