No boot after bios upgrade on lenovo 3000 k100

I updated my Bios using the flash upgrade from the lenovo website and right after that my system would not boot into windows at all!!!!!!....I followed instructions from website to the "T" and now wont boot into windows at all....tried resetting the bios by removing the battery on it what gives???....I am using Vist home ultimate and was up and running until this update....
DAVE

I also experienced a failure attempting to update the bios with the Flash download. My current bios is 2SKG28 and I downloaded the "2SJG33USA.EXE" (Flash from operating system version)
Installing the package in Windows Vista
======================
1. Close all open applications.
2. Click 'Start' -> 'All Programs' -> 'Accesories'.
3. Right click 'Command Prompt', select 'Run as administrator'.
If the User Access Control (UAC) dialog box pops up, select Allow.
4. Type "cd C:\LENOVOTOOLS\FLASH\2SJG33\" and press Enter
5. Type "FLASH.CMD" and press Enter.
6. Two windows will pop up, with the upper window showing the update process.***
***At this point I received the 'incorrect ROM ID' failure, and was able to exit.
Thanks for the assist!
Lenovo 3000 K100 5706-1330 Intel Desktop Computer - CPU C2Q Q6600 2.4GHz, 3GB DDR2, 500GB SATA, SATA 16XGSA-H60N DVDRW, Windows Vista Home Premium, System BD (IG33_AD1988_I82566) HH LX-317CT(W) Chassis (R), BFG GeForce 9600 GT 512MB, BFG GS-550W PSU

Similar Messages

Help Please - X200 will not boot after Bios Upgrade - keeps asking for power on password

Hi there,
I am new to this forum and please let me say a big Thank You for your help in advance.
I am using a lenovo thinkpad x200 running windows vista with service pack 1.
The laptop has always been running fine and has never given me any issues. Unfortunately, all this came to an end yesterday when I ran the system assistant which did a round of updates and it prompted me to reflash my bios.
I did what was instructed and closed all open applications and after the laptop restarted, there was a noise from the harddisk (the sound was basically like what happens if the harddisk suddenly loses power). Then, all i got was a black screen, no harddisk acitvity with only the power cable LED and another LED (with the shape of a N tiled at 20 degrees) on.
I searched the forum and did what was suggested in this entry: http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/Blank-screen-after-Bios-Upgrade-on-X200/ta-p/29...
This is what I did so far"
I turned off the power, took out the backup battery and waited for about 30 minutes (repeated this step several times, also removing the harddisk) but to no avail.
I removed the RAM and tried booting and there was that characteristic beeping sound.
I replaced the RAM, redid the CMOS clearing, and now there is the Lenovo startup screen. However, there would be an error code 0271 (no date time) and 0251 (something about default configuration). Then, these disappear and all I am left with is the Bios Power On password prompt. Somehow no matter what I type nothing can be input into the field (and I did not create any password as far as I can remember).
I redid the clearing for the power on password by removing the backup battery as suggested at the bottom of this page http://support.lenovo.com/en_US/detail.page?LegacyDocID=migr-59377 but it is no use. Each time I restart, even if I press the blue Think Vantage button or F1 or F11, I still get the same 0271 and 0251 error messages and am left with the power on password prompt.
I am really desperate as I really like my lenovo x200 and there is important data on the laptop. I would appreciate any suggestions on how I can solve this. Its amazing how a simple update can turn into such a disaster. Now i know i should never upgrade or update my Bios (or at least proceed with extreme caution).
Anyone can provide some help to get my laptop workin again?
Thank you very much,
Mark

try reflashing your bios?
http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-70348
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

X79A-GD45 windows 7 freezes during boot after bios upgrade/usb 3.0 drivers inst.

Hello,
After I upgraded my bios from 1.3 to 1.4 I noticed I still had some not properly installed hardware in the computer management screen, so I used live update 5 and found the the Renesas USB3.0 Drivers. The system runs fine, except from a cold start.
When starting the machine, windows freezes on the 4 colour logo, before the usb initializes (this I can tell from the keyboard not lighting up).
A forced reboot does not help. However, going in the bios (to check if all drives are functional) and then booting, does. After this the machine runs fine again.
Now my question is, is this caused by the new bios or by the Renesas USB3.0 Drivers? Or is it something completely different?
Thanks a lot,
Floris
X79A-GD45
i7 3930K

Using LU5 often ends up this way doing UEFI/BIOS updates dead board!
In the future, recommend to use the forum flasher found here with instructions on how to use it; https://forum-en.msi.com/index.php?topic=108079.0
After a flash, it is also recommended to remove the power cord from the PSU, remove the battery for awhile, clear CMOS & reset.

K7n2-L wont boot after bios upgrade

I have been very happy with the motherboard since i bought it in april 2003, been very stable and only had minor usb problems. And i finally decided to upgrade the bios from v. 3.7 to v. 4.1.
After the upgrade the machine boots up to the first windows that shows me the memory and the hard disk i have installed. I can also go into BIOS.
But the PC stops when its about to start booting up the HD or CDrom. According to the lights on the D-Bracket its trying to initializing the floppy controller.
There has never been a floppy drive in this PC before(i booted the PC on CDROM when i upgraded the BIOS).
I have tried the following things without success;
installed a floppy drive.
Cleared the CMOS(with the jumper)
Unplugged the cdrom and the hard disk.
Tried every memory configuration.
jumped the safe mode jumper.
It seems to me that i can only fix this by changing the BIOS chip....or the mainboard.
Anyone had this problem?

Azraeliz,
Sounds to me like perhaps you've overlooked a setting in the BIOS
Did you take note of the BIOS settings prior to flashing so you could put the settings back the way they were?
nuckelavee,
I suggest you start your own thread. I have a hard time believing there is no CMOS jumper.
Tried this? ***Starting your K7N2 Delta2 at default settings***

Not booting after BIOS upgrade in T500

I upgraded my T500 from BIOS 3.09 to 3.18 using the windows upgrade utility (6fuj42us.exe?). The upgrade went fine. I rebooted the machine and got the login windows screen (I have windows XP professional). However, the instructions of the BIOS upgrade called to enter into the BIOS and press the F9 key in order to set all the system defaults. After that the machine did not boot. It gives me the initial windows booting screen (windows flags) and then a blue screeen. I downgraded the BIOS to 3.15 using the bootable CD utility (6fuj39uc.iso?). The downgrade went fine. I can get into the BIOS but have exactly the same problem when loading windows. Unfortunately I could not find a similar bootable program for BIOS 3.09 only the windows executable program (6fuj34us.exe?). Is there any fix other than reinstalling windows? Thanks.

Hi malope,
please enter the Bios and check the HDD is switched to compatible mode instead of AHCI Mode.
Maybe than you can start Windows.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Satellite L300 refuses to boot after BIOS upgrade

Hi,
My girlfriend's L300 was lagging terribly so we decided to format C:. We did this with the accompanying XP restore disk.
Then we had to upgrade the drivers. We started the installation of the BIOS upgrade from the Toshiba driver website, went away for a while and when we came back the computer had restarted of itself.
It was stuck in a cycle of the "windows loading" screen and the one with a bottom bar that says press F2 for this or F12 for that. Tried all options in the boot menu, not even safe mode works.
We tried to reformat with the previous method, by inserting XP CD and holding down the 'C' button while starting. We get the familiar 'Windows Setup' screen, and it seems to load all the windows setup files from the CD. But when we get to the installation, we get a blue screen error message. 'A problem has been detected and Windows has been shut down to prevent damage to your computer.....Technical information: ***STOP: 0x0000007B (0xF78D254,0xC0000034,0x00000000,0x00000000)
Nothing seems to work, please help! We really want to save the images, on the D: disk partition.

Hi
Try to set the BIOS to default settings.
You have to access the BIOS and there you could set it to default.
Please check if you can install the OS using the SATA mode -> AHCI and compatible.
If you use AHCI then you have to include the SATA drivers. If you use the compatible mode, then SATA drivers are not needed.
If you want to get access to the HDD before installing the OS in the C partition, then I would recommend booting the notebook using a Windows Live CD like WinPE or BartPe.
Both are live cds which dont need a installation you have to boot from such disk only to get access to the content on the HDD.

Edge 15 won't boot after BIOS upgrade

Hi everyone.
I have a Lenovo Edge 15 and I recently (as in, this morning) tried to upgrade the Bios from the support site for the Haswell i5.
I downloaded the exe, let it run and received the notification that my computer would restart. I just it do it's thing, it goes into the BIOS and appears to be install the bios fine, and then I receive a notice my laptop would restart.
But, once it restarted, it set went into a boot menu. I select the HDD where my OS is installed but the screen goes blank and then (appearantly after restarting) goes back to the boot screen.
I can get into the BIOS fine but I cannot get past the boot menu.
I tried opening my laptop, disconnecting the battery and the CMOS battery (I think it's a CMOS battery), plugged/put them back in and I still have the same issue.
Any ideas as to what the issues is?

Blink code indicated BIOS corruption. Try Roll back of BIOS:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=uk&lc=en&docname=c02693833
You have to try this many times, the timing of holding the keys together is very important 1-3 seconds.
If that doesn't work I'd probably affected your hardware, you may have to contact HP.
thanks,
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

P67A GD65 new beep on boot after bios upgrade [error sound]

Hello,
I've just updated my bios (from 1.7 to 1.E) and I have now an additional beep at the start of the machine.
I was used to have 4 beeps at the same tone, then another one after a pause with a higher tone. But now i have a beep at the beggining with a lower tone, which really sounds like a problem.
I updated the bios this way :
Downloading this zip http://www.msi.com/service/download/bios-17245.html
Unzipping and copying to usb key
Entering UEFI then Setting>M-Flash>Select one file to update bios, selection of the 1.E0 file.
Do i need to do something else ?
I've also tried to use LiveUpdate5, it updates to 1.D0, but same problem.

Yes, I have the same beeps. The middle beeps should be from how many USB devices the BIOS detected connected to your computer. Again this is normal. If you want to know exactly what each beep in the sequence means, contact MSI tech support and they should be able to tell you. I have also not been able to find any documentation as to what the beeps sequence actually stand for except for the middle beeps being USB devices connected. I really would not worry too much about it if your computer is booting correctly and loading into your OS. If that is the case, there is nothing wrong.

PC wont boot after BIOS Upgrade

I have a K7T266 Pro2-RU motherboard, which had BIOS 3.2 on it but I used Live Update to go to 3.6. Since I did this, my conputer boots to showing the ide devices and then the chart of info on screen, but does not go any further. The D-Bracket shows a "Assign Resources to all ISA". This board does not have ISA???? Any help on what I could do would be appreciated.

Hi,
Clear the CMos....

Mac mini won't boot after RAM upgrade.

Tried installing new RAM in my Mac Mini, 512MB stock to 2GB of Crucial. Followed the directions to a T, grounded myself the whole time.
Things I've tried so far:
1. Resetting the PRAM, no luck.
2. Holding option at start-up, shows no icon.
3. Holding shift, no luck.
4. Holding X, nothing.
How do I get it to accept a CD if it won't boot?

Welcome to Apple Discussions!
You clearly have a problem, but you don't describe exactly what that is other than that your mini won't boot after the upgrade. What happens when it starts up? Does it attempt to start and hang up on the grey or blue screens, or does it start beeping at you almost immediately after you try and start it up, and also flash the power light?
If the former, then you may have dislodged a connector while working inside the system, in which case opening it up and checking that everything is firmly connected would be the first thing to do. If the latter, then the beeping/light flashing is the system telling you it has failed the power-on self test and the pattern of beeps/lights indicates why. In your case likely the system can't find workable memory. In that instance, opening the system and ensuring that the RAM is firmly and fully seated would be a good step, and if the mini continues to fail, then replacing the new RAM with the original to test that the system will then start.
It is not likely that anything had damaged your MacOS install in the process of upgrading, thus normally no reason to need to boot to CD as a result of a RAM issue.

MacBook not booting after RAM upgrade

I'm sorry if the case has been already posted.
Yesterday I took my MacBook Alu unibody late 2008 to a RAM upgrade (from 2 to 4gigs) to an offical Mac Reseller. They installed it and showed me that the system loads properly and recognized the new RAM.
I took it home, started working on After Effects and Photoshop and when i wanted to check a video on Quicktime, this program refused to boot.
Then photoshop freeze and after effects did so. I quited all aplications and restarted. On restart after the 'bong' i've got the grey screen white an apple logo and a loading bar underneath, that was it, it never finished loading but shutting down.
After the 2nd try the computer gave me the BAD RAM alarm signal right before the start button was pressed and nothing more. I just managed to start it ONCE on safe mode, but this one also freezed and colapsed.
Today i didn't get the BAD ram alarm but the grey screen and loading bar after shutting down.
I took it back to the reseler, the shop boss who did the upgrade wasn't there , the guys on the morning shift placed the old RAM back resulting the same. So they told me it's a software problem, not hardware and might be caused by a failed firmware update or something i did wrong and since i was showed that the system booted after the upgrade i can't complain or argue that they did somethiing wrong.
So basically the want 80euros to check what's wrong with my computer plus the 120 i already payed them for a RAM that doesn't work and of course the repair cost of the computer.
On monday i'll go to talk to the boss, what do you guys recomend me to tell him? i'm frustrated that the guys there treat me like if i broke my computer for beeing stupid and wanted to get it fixed for free, when it clearly broke after they did something wrong on it!
please advice me!
thanks!
Message was edited by: finn bell

What brand is the RAM? From what you said, it is obvious that the RAM is at fault. I would simply tell them that it is not compatible and return the RAM.
Check the System Profiler to see what it says about the RAM (Apple Logo - About this Mac - More Info) and run this application to test the RAM:
http://www.memtestosx.org/joomla/index.php
If either shows any errors, print out the results and take them with you to the store.

Laptop not booting after I Upgraded BIOS

Toshiba Satellite A215-S5849
Originally had issues with the left speaker making a horrible buzzing noise. Searching forums & help boards & the fact that I'm fairly computer Literate I came to the conclusion a OS reinstall was called for.
Since I only use this laptop for DJing theres only a couple of programs on it so it was not too much hastle.
Reinstalled OS Windows 7 updated it & all the drivers & the Buzz was still there.
This is when I read from a couple of users of Toshiba laptops said an upgrade of the BIOS helped them.
So I went to the official Toshiba support page & flashed my laptop using the following BIOS upgrade
ACPI Flash BIOS version 2.00 for Satellite A215 (PSAFGU/PSAFHU) 32/64-bit
Nearing the end of the flash my pc screen went black power lights are on, cord light on, battery light on just no OS
What I've tried.
Unplugged from power supply.
Removed Battery
Left for 20 mins & then tried to reboot.
Same thing happens each time
Power lights come on HD spins for a minute but nothing happens after that.
Any ideas why an official software update would cause my computer to not work & how do I roll back or clear my bios to default specs.

Finally I found a good Phoenix crisis copy at : http://mods.myftp.org/Tools/CrisDisk_and_Pen_Drive?_Recovery.rar
to download my own version of crisis disk with the new v2.0 rom bios. ready to build the floppy by running the crisdisk.bat:
http://rapidshare.com/files/410963513/CrisDisk.zip?.html
I posted this instruction to repair my A215 with these files:
Since finding a solution was a very confusing experience, here is how I fixed it (it should work for most similar models.)
Now read it all the way through because the steps are critical.
I got a Toshiba Satellite A215 PSAFGU (S6814) And after shutting down from overheating during a flash from windows it didn't boot. Black screen and nothing more. Meanning my bios was corrupt
So after lots of trial and error, using an external usb floppy drive I managed to save my laptop.
Maybe people here describe how to do it, but they tell you to download the wrong crisis recovery files and once you try to use your ROM instead of the one on the disk, or try to replace phlash16.exe it just fails. Tried injecting but that didn't work.
Finally I found a good Phoenix crisis copy at : http://mods.myftp.org/Tools/CrisDisk_and_Pen_Drive?_Recovery.rar
unrar and go to the directory, then unrar (you'll see it) CRISDISK.rar .
This copy of crisis with phflash16.exe (in the extracted directory) is a good version that can handle the newest versions of bios ROM.
Now copy your ROM file to the crisisdisk directory renaming the file to bios.wph and thus replacing the existing one.(i used the new 2.0 version ROM from the Toshiba site - in this case its called m10a200.rom)
To prevent 'dos path' errors when building the disk, copy the entire directory to a simple one like c:\cirsis
Build your disk now by running CRISDISK.BAT - the process includes quick formatting, copying the three files, and lastly making it bootable, make sure you go through all the steps. ( at first, i messed the last part by not having it bootable and it failed ofcourse)
once it says it created the disk successfully, put it in your external usb drive (or use the disk you created to make a bootable flash drive by using hp drivekey boot utility available here: http://h20000.www2.hp.com/bizsupport/TechSupport/S?oftwareDescription.jsp?swItem=MTX-UNITY-I23839 I didn't have a chance to test it with usb flash drives, but it should work.)
Now once you connected your media to the usb port on your laptop:
make sure the battery is out, power cord out, hold fn+f, while doing that, plug the cord and then push the power button, release the fn+f key once you see the light on your usb drive/usb floppy is starting to blink. it should pause for a few seconds, and then start reading the disk for a while (not just 3 seconds). Process should not take more then 10 minutes so waiting more then that is a waste(trust me). The computer should reboot byitself if everything is fine. Mine took about 5 minutes but give it 10 just to make sure.
After hours of finding, replacing, injecting, only this worked.
This works for sure, if you follow these instructions with your Toshiba Satellite A215. Don't loose hope - you will recover it.
A good sign is when using the fn+f method and it flashed the usb drive/floppy. It means its 99% recoverable.
Really hope this saves time for others.
This is a solution posted by yarivc on the USA Toshiba site.
http://laptopforums.toshiba.com/t5/System-Recovery-and-Recovery/Toshiba-Satellite-A215-S7422-bios-crisis-recovery/td-p/69185
BTW
to the last poster
If you were to ask 100 customers in any comp store who just purchased a Toshiba Laptop if they knew a OFFICIAL UPDATE from the manufacturers support website would VOID a warrenty I gaurantee not one of them would know that nor be impressed by it.
Further more what screwed up my bios was not the BIOS upgrade but the fact that Toshiba has a install from your desktop (windows) button in the update, researching this I found that one should never use this method because Windows in inherently unstable when it comes to BIOS update.
This option should NOT have been included in the update since its very unstable to do so.
On a side note.
My left speaker buzzing noise is back. But it doesnt seem too annoying right now concidering I saved myself money & headache.

Memory Upgrade for Lenovo 3000 Notebook N200 (Type 0769)

Hi I want upgrade my memory from 1Gb to 4Gb (x2 slices of 2Gb).
pc spec:-
s/w MS XP pro sp3.
Original mem
1off Hynix 1Gb 2Rx16 PC2-5300S-555-12 (Works fine)
1st mem pair tried
2off manufact? 2Gb PC2-5300 128X8 200 SODIMM
2nd mem pair tried
2off Hynix 2Gb PC2-5300 128X8 200 SODIMM
Ive tried two lots of memory from Mr Memory and both get stuck on the Lenovo boot screen. Ive tried all the combinations incl slots with same effect. Both pairs were not faulty as they tested ok at Mr Memory once returned.
Wondered if I need to upgrade the Bios or anythng else to run 2Gb or 4Gb of memory?
Anyone else seen this problem?
Any help would be most gratefully received!
Cheers

hi yan_c,
Welcome to the Lenovo Community.
Have you tried to check the timings of the 2x2GB RAM if they are identical to the original 1GB RAM? You can use CPU-Z to check the timings of the 1GB RAM inside of Windows. As for the 2x2GB RAM, the timings should be in the packaging material.
Sample timings:
Spoiler (Highlight to read)
Source: http://www.notebookcheck.net/Review-Lenovo-3000-N200-Notebook.9088.0.html
Source: http://www.notebookcheck.net/Review-Lenovo-3000-N200-Notebook.9088.0.html
It's possible that the Memory Reference Code under the BIOS can't initiate the RAM if it has different timings. Flashing the BIOS would be the second step in this scenario.
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

G50-30 System is unstable after BIOS upgrade

After installing Windows 7 I decided to upgrade BIOS and picked the proposed update for Windows 7 64bit (http://support.lenovo.com/uu/en/products/laptops-and-netbooks/lenovo-g-series-laptops/g50-30-notebook-lenovo).
After applying the upgrade system boot failed. This issue was fixed using yapha7's advice (see this thread: https://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/Lenovo-G50-30-Bios-update-crashed-installed-win-7/m-p/1693051#M32265).
Well, OS boots. But now I can draw violet lines on a viewport by pressing two mouse buttons simultaneously. WLAN breaks periodically, gets fixed by a reconnection. CPU consumption increases without any resorce-intensive task being launched. It iss understood that latter two issues might not be related to a BIOS upgrade. But they all appeared shortly after the upgrade.
Also it is not clear if I'm able to use USB 3.0?
The current BIOS version is A7CN47WW. Is it possible to rollback? Can you provide the original / any stable BIOS version (for Lenovo G50-30 Windows 7 x64) which is prior to the one available at the drivers download page? Thank you!

hi a_demenkov,
Just to check, have you considered reinstalling Win7 after you got the issues that you described after flashing the BIOs to v47?
If you're leaning towards downgrading to the BIOS to v45, try the following:
1. Boot into the BIOs and enable BIOS Back Flash.
- Sample image
2. The BIOS v45 download link is not listed but if you look at the the BIOS v47 file below, you should be able to get v45 by renaming:
BIOS v47
https://download.lenovo.com/consumer/mobiles/a7cn47ww_64.exe
to
BIOS v45
https://download.lenovo.com/consumer/mobiles/a7cn45ww_64.exe
If you're not able to flash the BIOS inside Windows then you may need to do it under DOS.
How to flash InsydeH2O EFI under DOS enviroment
Goodluck!

External USB keyboard does not work with T60 after BIOS upgrade

External USB keyboard does not work properly with T60 after 2.26-1.07 BIOS upgrade.
It does the same with or without the docking station.
Anyone else bumped into this problem yet?
Has someone found any fixes for this?
t

Hi and welcome the forum!
Try uninstalling all USB hub devices from the device manager and reinstalling them again, particularly the keyboard's.
v2.26 is supposed to fix the issue according to lenovo:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-63024
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

No boot after bios upgrade on lenovo 3000 k100

Similar Messages

Maybe you are looking for