No Boot after install with

(for the 754 machine listed in my sig)
hey all - I cant boot into windows after a clean install of XP...will either hang on OS loading screen or on 'detecting IDE drives' after mem check. I''ve updated the bios to current and i've tried using all Nforce SATA drivers out (2.5, .2.6, 2.7) with no luck. The only way i seem to be able to boot into windows is not to install the SATA drivers. When i go that route my machine runs slow. Anyone help me out?

there have been some issues with the Maxtor 16Mb Cache HDDs & Neo2 Problems To a large extent these seem to have been solved.
There are also some beta bios about which may help , Just take care which one you use on which mobo
K8N NEO PLATINUM BIOS 1.51 beta

Similar Messages

Windows 8.1 Pro not booting after install of Hyper V - ASUS z87 + intel 4670K

Hi,
I am running windows 8.1 pro on a intel 4670K 4th Gen Haswell CPU and ASUS z87 plus motherboard. 16gb of kingston hyperx ddr1600 memory.
I have enabled virtualisation technology in the bios. CPU has SLAT.... or Extended Page Table, as intel likes to refer to it.
When I install HyperV platform and management tools the computer configures and reboots
AFter reboot it brings up the blue window image and spinning circle of dots for a while then reboots. It does the same thing again and then reboots and goings into repair mode and asks me to do a system restore. It then restores to before they HyperV install.
I've tried turning off xHCI mode (i.e USB 3.0) in the bios as this seemed to be a known issue with some gigabyte boards. This did not rectify the issue
Updated to latest asus mainboard bios 1405. Same issue still occurs upon install of hyper V.
Automatic repair does not work and I have to restore from system restore point.
I performed a clean boot after installing the feature and it still couldnt boot to windows.. it just sits at windows logo and then restarts a few times and then launches the startup repair. Once the startup repair begins, the only way I can get into windows
is restoring to a system restore point from before the hyperv feature install.
Please see the following logs which may have further information:
CBS Log
https://skydrive.live.com/redir?resid=1F523A0B8734322C!685&authkey=!AGMjUfosLFpzYNI
Setuperr
https://skydrive.live.com/redir?resid=1F523A0B8734322C!682&authkey=!AKS8Jb1S6W2IAH8
Windows update
https://skydrive.live.com/redir?resid=1F523A0B8734322C!683&authkey=!AJdWKuKj4negBoQ
Windowsupdate(1)
https://skydrive.live.com/redir?resid=1F523A0B8734322C!684&authkey=!APplVjuLpNZW_AY
I logged a job with asus support and their response was:
"Clear CMOS and ensure virtualisation technology is turned on in BIOS. If it still doesn't work, seek assistance from Microsoft"
Previously asked this question but took a while to get back to update with the logs and it was listed as Answered.
This issue is still existing and I'd appreciating any assistance.
Simon

Hi Simon,
Thank you for uploading the Log files.
According to the log files, no actuate clue can be found.
So, I suggest you upload the dump file so that we can help you analyze them.
Automatic Memory Dump Settings on Windows 8:
http://www.thewindowsclub.com/automatic-memory-dump-settings-windows-8
It also applies to windows 8.1.
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Note: I highly recommend you use SkyDrive to upload collected files and to post screen shots/pictures. Although you might not be used to it, SkyDrive features a lot of free advanced functionality around file storage capacity, sharing,
privacy, and collaboration:
http://skydrive.com
Regards,
Kelvin hsu
TechNet Community Support

Will not start even in safe boot after installing latest camera update

MacBook Pro will not start even in safe boot after installing latest camera update.
I started my machine and did a software update. Only the camera update needed. So installed and when required I pressed restart. It restarted and did install. Then restarted again. I expected to get to the login screen and it turned itself off. Tried three more times. Each time shutting off. I unplugged everything, and pressed start waiting for log in window. No it shutdown before the log in window. I then tried safe mode and that did not work either on three more occasions.

I have managed to resolve some issues. I can now restart the machine via a CD boot. If I do cmd C into something like tech tool pro, then restart from that disks menu it restarts every time.
If I try a safe start it shuts down. If I try a normal start it shuts down. I have managed to repair permissions and that cleared up some start up permissions but with no improvement to the boot problem. The only way to load is via the cmd-C boot option. Any other ideas?

Macbook pro won't boot after installing update 10.9.3

macbook pro won't boot after installing update 10.9.3

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Very slow boot after installing 10.10.3

insanely slow boot after installing 10.10.3, it takes 10times longer compare to 10.10.2, using MBA 2014

Open System Preferences, select Startup Disk, and make sure your internal drive is selected as the startup disk. Then click restart!
This worked for me, personally with the same issue.
Good luck!

LR-CC wont work after install with Creative Cloud. I run a 64 bit W7 system

HI,
LR-CC wont work after install with Creative Cloud. I run a 64 bit W7 system.
I had LR 5,7 running and was not installed via the CC.
What to do
Thanks.

Hi Ridder,
Please refer the solutions given in the following article.
Lightroom doesn't launch or closes automatically after splash screen
Hope this helps.
Regards,
Sumit Singh

Is there a way to uninstall Legacy and Compatibility Content after installing with Additional Content?

Is there a way to uninstall Legacy and Compatibility Content after installing with Additional Content?

Hey Antonio,
That's a good suggestion, and it's something that we're already planning on addressing in the next release, probably via a service that you can use to view information about patches and notifications -- not only the ones that were known at the time that you installed, but also ones that might have come into existence since then.
In case you're still looking for the link to that CVI 2009 notification, you can find it here.
By the way, my world cup sympathies to you -- your guys were robbed.
Luis

Windows 8.1 Pro will not boot after installing iTunes 11.1.5.5

It's a little hard for me to accept that this is true, but the symptoms seem to be pointing the direction of the title of this thread. I have an all-in-one touch-screen Gateway computer that came with windows 7 (yeah, a win7 machine that came with touch, yeesh) and I put windows 8.1 pro 64-bit on it with a clean install (actually windows 8 was the clean install and then I did the free microsoft store upgrade to 8.1). It has 4GB of RAM and has a Pentium Dual Core cpu @ 2.2 Ghz. It was running fine with the previous version of iTunes, but as soon as I updated to iTunes 11.1.5.5 (and there may have been other apple things that updated too (ie quicktime of course), the computer prompted me for a reboot and froze during the reboot process (before it even shut down). Then it had trouble booting into windows. I ran startup repair to no avail and decided to do a sytem restore. My most recent restore point was from a few weeks back, before iTunes was even installed at all on the machine. I went back to that point and the machine worked fine again. Then I installed iTunes 11.1.5.5 and the same exact problem occurred - it froze while shutting down after the iTunes install and then would not boot into windows 8. I did another system restore and have not put iTunes back on. The system is working fine. I'm going to try to find out if there's a way to download older versions of iTunes, so that I can install it, but the bigger issue here is: Is this a legitimate bug/incompatibility with some hardware or software or driver that I have on this computer? I run a computer support business so I know my way around but I don't have time to troubleshoot this from scratch. Anyone else seeing this? Apple employees...a little help here? Any input?

let it sit for about 30 min and still got nothing
I then did a "hard shutdown(just pressed power button till it turned off the computer)"
That may not have been long enough. But a "hard shutdown" would definitely have been construed as a problem due to the update.
Asus apparently is a known problem case...
http://blogs.msdn.com/b/usbcoreblog/archive/2013/10/19/help-after-installing-windows-8-1-the-superspeed-ports-of-my-asus-system-don-t-work.aspx
Link courtesy Darrell Gorter [MSFT] found here
"Windows 8 Keyboard and mouse not working"
http://social.technet.microsoft.com/Forums/en-US/w8itprohardware/thread/06e9b341-0619-4085-acbf-e2f0133ca428?outputAs=rss
(RSS given to avoid overhead of opening long thread for IE users)
Note that there may be useful tips for you in both of those threads' comments.
Robert Aldwinckle

Windows 7 wont boot after install of boot camp drivers

I have been trying to get boot camp on imac mid 2010 with Maverick. TodayI used
Boot Camp Support Software 5.1.5621
The first set of drivers
Boot Camp Support Software 5.0.5033
kept crashing on windows. Today I noticed a new set of drivers, well its the same issue. If I leave off the boot camp drivers windows is fine, except no sound and other driver missing issues but it works. The problem seems to be Mav or the drivers, before updating to Mav everything was fine. Sometimes I can even get to the windows log on screen, at one point I was able to log on and do things. So being smart, I restarted and the problem came back. Who says Macs dont have issues.
Any thoughts

Just ran into this same issue.
My problem got resolved after using the x64 version DVD of Win7 (just x64 instead of the DVD that had both x86 and x64 versions).
What I did:
My host is Windows 8.1
After installing Windows 7 x64 as VM on my 8.1 based laptop two days ago, I wanted to do the same on my desktop PC, but I had the same issue described here.
I used a DVD just with the x64 version for my laptop and a DVD with both x86 and x64 version for my desktop.
Tried repairing as advised by a post, but got the error: "This version of System Recovery Options is not compatible
with the version of Windows you are trying to repair. Try using a recovery disc that is compatible with this version of windows."
I exported and imported the VM from my laptop to my desktop to test it and it ran with no problems.
So I tried the DVD that had just the x64 version of Win7 and that installed without issues.
I'm curious if this happens only when a DVD with more than one Win7 versions is used.

Solaris 3/05 no longer boots after installing 113000-07

I can't get Solaris 10 3/05 to boot anymore after installing patch 113000-7. The patch was installed by Sun's update connection software.
The computer is a Dell Dimension XPS T600 with 512MB ram.
I get the error:
Error 28: Selected item cannot fit into memory.

I'm not sure how to edit my replies so I'm just gonna make another reply. I assumed the following values:
GPT 3 Start
GPT 3 End
GPT 3 Size
NTFS Start
NTFS Offset
NTFS End
NTFS Size
293378384
293380320
1936
294649856
1936
490233855
195584000
I followed the rest of the instructions given here. I made sure to enter the second number with a + sign. After doing all of that all these checks worked:
Test 1 - Does Bootcamp Volume show up in Finder?
Test 2 - Can you see files in Bootcamp Volume?
Test 3 - Can you select Bootcamp in System Preferences -> Startup Disk?
I've always been able to access my bootcamp files from finder and I can try to boot from System Preferences -> startup disk, from rEFIt and also from my macbooks startup manager that I access by holding down option while booting.
I'm starting to think I've misrepresented my problem and that I've been looking at the wrong threads. Every time I try to boot windows I get a black screen with the Windows logo and some text saying something like "starting automatic recovery" or something like that. It then takes me to a blue screen displaying an error number and telling me to use recovery tools on the installation media. Maybe this is different from the problems I've been looking at in other threads.
I've tried using the same USB I used to install bootcamp with but it doesn't give me the option of repairing the installation.
EDIT: So I figured out how to edit replies. Anyway I just tried to boot into Windows and checked. The black screen with the Windows logo says "Preparing Automatic Repair". The blue screen gives me the error 0xc00000e.

Windows NT does not boot after installing NI-CAN 1.6.0 or security update

We are running Windows NT 4.0 SP 6 english with MS IE 5.5.
On one machine we had NI-CAN 1.6.0 installed. After installing the security update from Microsoft over the web the machine did not boot.
On another machine the security update was installed. After installing NI-CAN 1.6.0 the machine booted but hangs during logon. On this machine we installed Windows NT, MS IE 5.5 the security update and NI-CAN from new and the effect was the same.
Does anyone else have similar experience with this problem?
Machines with Windows 2000 and XP work well with NI-CAN 1.6.0.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Hi,
I haven't found any known issues. I going to try it out here. What's the security update you're installing?. I noticed there's a bunch of them in the Microsoft web site.
What CAN hardware do you have (PCI, PCMCIA, etc)?.
Let me know this details and I'll try to reproduce the problem.
DiegoF.
National Instruments.

Error booting after installing

Hello, I have installed arch linux, with the legacy-ide option in the boot, needed to use the right /dev/hda6 partition.
After installing everything, when I boot the new system, I get the next error:
kinit: cannot open root device hda6(3,6)
I think this is because the image is built with some kind of mistake, but I don't know why.
/dev/hda6 is the / partition, then I use /dev/hda5 for /home and /dev/hda8 for swap.
I don't really know why hda6(3,6), where this 3 comes from?
Thank you! I'm really looking forward to run for the very first time archlinux in my laptop.

I had the same problem. I could solve with this:
This ISOs include a small, but nasty bug,
which may lead to a non functional initramdisk,
if you use all defaults suggested by setup.
2 workarounds before installing:
First workaround before entering setup:
mount -t ramfs none /dev
/etc/start_udev
now setup works as it should!
Second workaround:
while using setup:
edit /etc/mkinitcpio to not include autodetect in HOOKS= array
1 workaround if you already installed and system doesn't boot:
use the kernel26-fallback.img as initrd in your bootloader
after successfull boot just fix the ramdisk:
mkinitcpio -p kernel26
I apologize for any non functional default initramdisk by using this ISO.
greetings
tpowa

Arch linux doesn't boot after installing AMD ATI Catalyst

I have a laptop which has a integrated graphic card intel 4th generation (4600) and an AMD ATI R9 m265x (hybrid Intel/AMD graphics card) so I have just installed AMD ATI Catalyst proprietary ones by following
AMD Catalyst ArchWiki.
I have used "Installing from the unofficial repository" method so in my pacman.conf I have added below entry for [catalyst-stable]:
[catalyst-stable]
Server = http://catalyst.wirephire.com/repo/catalyst/$arch
## Mirrors, if the primary server does not work or is too slow:
#Server = http://70.239.162.206/catalyst-mirror/repo/catalyst/$arch
#Server = http://mirror.rts-informatique.fr/archlinux-catalyst/repo/catalyst/$arch
#Server = http://mirror.hactar.bz/Vi0L0/catalyst/$arch
Then I have update pacman's database and install below packages:
catalyst-hook
catalyst-utils-pxp
lib32-catalyst-utils-pxp
(No need to install catalyst-total-pxp as I have installed catalyst-utils-pxp)
After installing it, I have configured the driver, configuring X using below command:
# aticonfig --initial
In order to use PowerXpress support I have installed catalyst-utils-pxp package plus additional lib32-catalyst-utils-pxp.
To perform a switch into Intel's IGP I have also installed the mesa-libgl package and Intel's drivers: xf86-video-intel and intel-dri .
I have enable the automatic update by enabling the catalyst-hook.service with below commands since it automatically rebuilds the fglrx modules while the system shuts down or reboots (so I haven't to do it manually each time kernel is updated using Catalyst-generator):
# systemctl enable catalyst-hook
# systemctl start catalyst-hook
And finally I have blacklisted radeon module by creating "/etc/modprobe.d/blacklisted.conf" file which content is:
blacklist radeon
and also I have ensured that fglrx line is added in "/etc/modules-load.d/Catalyst.conf" file.
To avoid problems, I have rebuilt the fglrx module by doing (I know it is not necessary as it is done by catalyst-hook):
catalyst_build_module all
Once I reboot, arch linux does not boot. Last lines printed out are below and then it freezes:
Starting temp files linker to catalyst...
Starting Catalyst event Daemon...
[ OK ] Started Catalyst event Daemon
Starting Catalyst's fglrx kernel' module builder...
[ OK ] Started temp files linker for catalyst.
[ OK ] Started Catalyst's fglrx kernel' modue builder.
[ OK ] Started gnome Display manager.
[ OK ] Started Network manager.
[ OK ] Reached target Multi-User system.
[ OK ] Reached target Graphical Interface.
[ OK ] Reached target Network.
I have tried to put nomodeset as a kernel parameter but it does not work. Also, after reading ArchWiki, I have noticed that it is recommended to don't do this as I am using catalyst-utils-pxp because intel driver needs it so I have removed nomodeset parameter from kernel but It continues not working.
Any ideas?
Package versions:
Kernel version 3.17.6-1-ARCH
catalyst-hook 14.12-1
catalyst-utils-pxp 14.12-1
lib32-catalyst-utils-pxp 14.12-1
xorg-server 1.16.2.901-1
xf86-video-intel 2.99.916-3
Last edited by toni (2014-12-13 19:38:38)

FInally I managed to boot arch linux.
I had to downgrade xorg-server from 1.16.2.901-1 to 1.15.2-1.
It seems there is a problem with Catalyst 14.12-1 and xorg-server 1.16.2.901-1.
Also I had to replace desktop manager from gdm to lightdm as gdm raises segmentation faults using xorg-server versions 1.16.2.901-1 and 1.15.2-1.
Finally I had to add an entry in pacman.conf:
[xorg115]
Server = http://catalyst.wirephire.com/repo/xorg115/$arch
## Mirrors, if the primary server does not work or is too slow:
#Server = http://mirror.rts-informatique.fr/archlinux-catalyst/repo/xorg115/$arch
#Server = http://mirror.hactar.bz/Vi0L0/xorg115/$arch
Then performs following actions:
1) # pacman -Syuu catalyst-hook catalyst-utils-pxp
2) Uninstall all the packages xf86* such as xf86-video-intel, xf86-input-evdev, xf86-input-synaptics, etc.
3) Install the packages uninstalled in step 2 and install them again using xorg115 repo, for example, # pacman -S xorg115/xf86-video-intel xorg115/xf86-input-evdev xorg115/xf86-input-synaptics
I have put a comment here.
Last edited by toni (2014-12-14 12:31:29)

[Solved]Wont boot after installing syslinux; unknown filesystem 'swap'

After installing syslinux to be my boot manager I can no longer boot into Arch, I can however boot into Windows 7. When I try to boot into Arch I get the following error.
Loading ../vmlinuz-linux......
Loading ../initramfs-linux.img......ready.
Probing EDD (edd=off to disable)... ok
Decompressing Linux... Parsing ELF... done
Booting the kernel.
:: running early hook [udev]
:: running hook [udev]
:: Triggering uevents...
:: performing fsck on '/dev/sda3'
fsck: fsck.swap: not found
fsck: error 2 while executing fsck.swap for /dev/sda3
ERROR: fsck failed on 'dev/sda3'
:: mounting '/dev/sda3' on real root
mount: unknown filesystem type 'swap'
You are now being dropped into an emergency shell.
sh: can't access tty; job control turned off
[rootfs /]#
What's going on?
Last edited by slughappy1 (2012-07-05 22:50:35)

loafer wrote:Can you post your syslinux.cfg please.
Surely
# Config file for Syslinux -
# /boot/syslinux/syslinux.cfg
# Comboot modules:
# * menu.c32 - provides a text menu
# * vesamenu.c32 - provides a graphical menu
# * chain.c32 - chainload MBRs, partition boot sectors, Windows bootloaders
# * hdt.c32 - hardware detection tool
# * reboot.c32 - reboots the system
# * poweroff.com - shutdown the system
# To Use: Copy the respective files from /usr/lib/syslinux to /boot/syslinux.
# If /usr and /boot are on the same file system, symlink the files instead
# of copying them.
# If you do not use a menu, a 'boot:' prompt will be shown and the system
# will boot automatically after 5 seconds.
# Please review the wiki: https://wiki.archlinux.org/index.php/Syslinux
# The wiki provides further configuration examples
DEFAULT arch
PROMPT 1 # Set to 1 if you always want to display the boot: prompt
TIMEOUT 50
# You can create syslinux keymaps with the keytab-lilo tool
#KBDMAP de.ktl
# Menu Configuration
# Either menu.c32 or vesamenu32.c32 must be copied to /boot/syslinux
UI menu.c32
#UI vesamenu.c32
# Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu
MENU TITLE Arch Linux
#MENU BACKGROUND splash.png
MENU COLOR border 30;44 #40ffffff #a0000000 std
MENU COLOR title 1;36;44 #9033ccff #a0000000 std
MENU COLOR sel 7;37;40 #e0ffffff #20ffffff all
MENU COLOR unsel 37;44 #50ffffff #a0000000 std
MENU COLOR help 37;40 #c0ffffff #a0000000 std
MENU COLOR timeout_msg 37;40 #80ffffff #00000000 std
MENU COLOR timeout 1;37;40 #c0ffffff #00000000 std
MENU COLOR msg07 37;40 #90ffffff #a0000000 std
MENU COLOR tabmsg 31;40 #30ffffff #00000000 std
# boot sections follow
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
LABEL arch
MENU LABEL Arch Linux
LINUX ../vmlinuz-linux
APPEND root=/dev/sda3 ro
INITRD ../initramfs-linux.img
LABEL archfallback
MENU LABEL Arch Linux Fallback
LINUX ../vmlinuz-linux
APPEND root=/dev/sda3 ro
INITRD ../initramfs-linux-fallback.img
LABEL windows
MENU LABEL Windows7
COM32 chain.c32
APPEND hd0 1
LABEL hdt
MENU LABEL HDT (Hardware Detection Tool)
COM32 hdt.c32
LABEL reboot
MENU LABEL Reboot
COM32 reboot.c32
LABEL off
MENU LABEL Power Off
COMBOOT poweroff.com

Win 7 won't boot after installing R&R 4.3...urgent help needed!

Hi everyone,
I'd be really thankful if anyone could help me with this problem. I've got an R61i and I'm running Windows 7 Professional. Got all the latest drivers and I recently installed the new Lenovo Toolbox. After installing the toolbox it recommended that I install Rescue and Recovery 4.3, so I installed it. Then I did a backup on an external harddrive and protected it with a password. After all that was done I installed some new Windows Updates and restarted the Thinkpad for the first time after the backup. All of the sudden whenever Windows is booting it also loads R&R. I've tried different boot-up options with F12 on startup...nothing. I also tried to recover my last backup through R&R, but the password I entered to protect my backup won't work in R&R and so it freezes the app after 3 tries. I don't understand why R&R is loading in the first place...there's nothing wrong with my software. Can anyone please help? I urgently need my computer to finish off some uni work before tomorrow.
Regards,
Pascal

Ok it seemed that my Windows partition was corrupted for some reason and since Lenovo hasn't come to publish a repair tool for Windows 7 yet I had no other choice than to boot from a Linux Live CD (Ubuntu). Backed up all my important files and then lay hands on the MBR myself...Anyways it worked so yeh, hope this helps anyone who's experienced the same problem until Lenovo makes that repair tool available

No Boot after install with

Similar Messages

Maybe you are looking for