No boot option after Windows 7 install on Mac Pro

Hi,
I have problem and it is very frustrating.
My configuration
Mac Pro 1.1 2x2.66
RAM 5 GB
HDs
Bay1 500GB (have a Mac OSx 10.6)
Bay2 250GB (install Windows 7 Ultimate 64bit)
Bay3 250GB (in raid Mac OSX 10.6.6) primary system
Bay4 250GB (in raid Mac OSX 10.6.6)
I have install Windows 7 via Bootcamp from system 10.6.6 and format and install Windows 7 on HD in Bay2. After installation I try to choose which operating system I want to run (with option key) but nothing happen.
It was grey screen without apple logo and system boot to Windows 7 only.
I try everything to boot with different options (key shift,x,c,...) but nothing happen. I can only boot with windows 7 and if is the windows 7 DVD in drive first ask to boot with DVD, after that boot on Windows 7.
I try to put Mac OS system DVD but still don't want to run.
I also try to remove HD from Bay1(macosx) and Bay2 (windows7) and boot from Raid HD and I have error that there is no boot system.
In windows 7 I run Paragon HFS+ and I can see HD500 in Bay1 but cant see in Bay3 and 4 (RAID hd). In disk utility I can see all hard drives.
I try to reset PRAM but while booting what ever I press nothing happens and boot only windows 7.
I need solution for this problem, please help me with this issue, thx

Another thing that might be close...
I've installed Win7 64-bit on a second HDD. It is Ok to choose boot with 'option' key, but another option is missing: while in win7 apple's bootcamp control panel shows both MacHD and Win7 bootable partitions, so I can tell 'software way' to boot to win or to Snow Leo. It's OK. However when I open 'startup disk' in OS X there's only Mac HD so if I need to reboot to windows I can't just do it with several clicks. I actually have to shut down OS X, wait for boot screen, press option and then wait for the boot options to appear and them choose. It's 'a bit' annoying, let alone windows version of bootcamp seems to do the job smarter. And it really is a good thing to choose "reboot into desired OS" with a click and go to kitchen for tea or something and not seat in front of the machine waiting for boot screen...
Am I missing something? Is it done the other way then 'system preferences>startup disk'?

Similar Messages

Can I move XP install image or XP Boot drive from windows PC to Mac Pro?

I have a computer running Windows XP and I have the OEM disc for reinstallation. I also have an image of a clean install of XP I can use to restore my OS. I plan to remove the hard drives from my Windows XP PC and never use that machine again because I have had nightmare after nightmare with some hardware and the vendor.
Can I use what I already have and set this up in a Mac Pro to use it under bootcamp or do I have to buy a new copy of XP, reformat the hard drives for the Mac and start all over? I have several programs that I need to run on Windows. Any suggestions on how to make the tranistion from a failing XP PC over to the Mac world would be greatly appreciated.

Hi,
is the OEM XP disc a 'full WIndows disc' or some sort of recovery disc that came with the PC you have ?
If it came with the PC you have, chances are that it will only work with that specific PC (some Dell and HP do this).
When you have cleared this licensing question, you might have a good chance doing what you wnat by using this Guide: http://www.lockergnome.com/it/2007/05/25/using-sysprep-to-create-a-windows-xp-im age-part-i/
Stefan

Arch doesn't boot up after Windows Update on Surface Pro 3

Hi all,
I am using a Microsoft Surface Pro 3. I have a persistent installation of Arch on a USB drive. It works very well on the Surface. The only problem I am facing is, whenever I run Windows Update, I am not able to boot from the USB Arch installation after that. It just guides me to the BitLocker recovery page. The only way to boot from the USB drive is to install GRUB on the EFI partition again. It'll work until the next Windows Update, but then again the same thing repeats itself. I am stumped as to how to resolve this.
Disabling BitLocker doesn't work too, as the system then boots straight into Windows instead of going to the BitLocker recovery page.

parag14 wrote:Would efibootmgr help in any way?
You can check the boot order by using:
efibootmgr
You can set the boot order using:
# efibootmgr -o xxxx,yyyy,zzzz
Replace the letters with the bootnumbers given by the first command.
You can probably use this method to reset Arch at the top of the list rather than re-installing GRUB.

Problem booting Arch after first install on MacBook Pro

Hi all,
I've spent the past month intermittently trying to install Arch on an old MacBook Pro with a broken screen running in clamshell mode (I've reformatted, clean installed OSX, and run pacstrap around 20 times now). I was originally trying to install Debian, but the Arch Wiki was so good that I switched. The issue has been the same anyway.
Every time I try to install, I get stuck at the bootloader stage, where I need to make the installation bootable. It doesn't matter what bootloader method I use, since I've tried:
Boot from /boot partition with GRUB
Boot from separate HFS+ GRUB partition
Boot from Apple EFI System Partition (ESP) with GRUB
Boot with rEFInd
Boot with rEFInd installed to the ESP
Arch itself works fine, but when I go to boot from rEFInd's autodetected vmlinuz-linux from 128MiB ext2 partition, I get the same error message I've gotten with every other configuration:
:: running early hook [udev]
:: running hook [udev]
:: Triggering uevents...
[ 0.558033] uhci_hcd 0000:00:1a.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:1a.0 setup!
[ 0.558097] uhci_hcd 0000:00:1a.0: init 0000:00:1a.0 fail, -19
[ 0.558135] uhci_hcd 0000:00:1a.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:1d.0 setup!
[ 0.558189] uhci_hcd 0000:00:1a.0: init 0000:00:1b.0 fail, -19
Waiting 10 seconds for device /dev/disk/by-uuid/2b121a89-aeb9-430a-8e6c-a05b79f08427 ...
ERROR : device 'UUID=2b121a89-aeb9-430a-8e6c-a05b79f08427' not found. Skipping fsck.
ERROR: Unable to find root device 'UUID=2b121a89-aeb9-430a-8e6c-a05b79f08427'.
You are being dropped to a recovery shell
[etc.]
When the Arch .iso live CD boots, it gets the first uhci_hcd errors, and then just moves on with:
:: hook [memdisk]
:: hook [archiso]
[etc.]
Here are the contents of my refind.conf file (/boot/efi/ESP/refind/refind.conf) (I omit all the standard comments):
timeout 0
scan_all_linux_kernels
[The example menu entries - all disabled]
menuentry "Arch Linux" {
icon /EFI/refind/icons/os_arch.icns
"Arch Boot"
loader /vmlinuz-linux
initrd /initramfs-linux.img
options "root=/dev/sda7 rw rootfstype=ext4"
And my refind_linux.conf (/boot/refind-linux.conf):
"Boot with standard options" "ro root=2b121a89-aeb9-430a-8e6c-a05b79f08427"
"Boot to single-user mode" "ro root=2b121a89-aeb9-430a-8e6c-a05b79f08427 single"
"Boot with minimal options" "ro root=2b121a89-aeb9-430a-8e6c-a05b79f08427"
My custom menu entry for Arch doesn't work either (I'm still researching exactly why). I've been quite confused by different posts all over by different people on how to configure the manual refind.conf stanzas. I also tried a direct to root menu entry, where I tried the files as /boot/vmlinuz-linux, etc.
The error I always get here is the same:
Starting vmlinuz-linux
Using load options "[same as above]"
Invalid loader file!
Error: Not Found while loading vmlinuz-linux
I've installed GRUB as well, just to be sure. Although I haven't moved it to any other partitions or 'blessed' it in OS X. (I have blessed the HFS+/EFI partitions when I used GRUB.)
Just FYI, I've used the following pages as guides:
My primary guide: Cody Littlewood's installation procedure for a MacBook Pro
The Arch Wiki MacBook Page, which was useful but a bit confusing and self-referential on the Bootloader section
The rEFInd website, by Rod Smith. I've read it fairly extensively (including an interesting comparison of SodaStream flavours)
A Gentoo Wiki page with a rEFInd example
The LFS GRUB chapter, and surrounding material
And I've largely read the Arch Wiki Beginners' Guide, Bootloaders page, GRUB page, GRUB EFI examples page, UEFI page and EFI Stub Loader page.
There have been others, but it's been a while since I read them. I've been trying to make this work for a while.
I've also looked at some other posts on similar subjects:
A post on the Arch Linux subreddit matching my (previous; with GRUB) situation, but not fixing my problem
An Arch forum post, of which there have been others, but google seems to have changed my search results.
EFI-Booting Ubuntu on a Mac, by Rod Smith
The Debian MacBook Pro page
A post about booting Debian without rEFIt
Again, there are more, but I can't find them all just now.
I've looked EVERYWHERE for a solution.
My question is, does anyone have any ideas on how I might make my computer bootable?
Almost forgot; I've run
mkinitcpio -p linux
successfully (I get the two driver warnings that seem to be standard).
Computer specifications are as follows:
Model Identifier: MacBookPro6,2 (mid 2010)
Processor Name: Intel i7
Architecture: amd64
RAM: 4GB DDR3
Graphics: NVIDIA GeForce GT 330M 512MB
Software: OS X 10.9.2
My disk partition table is as follows:
$gdisk -l /dev/sda
GPT fdisk (gdisk) version 0.8.9
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Fround valid GPT with protective MBR; using GPT.
Disk /dev/sda: 976773168 sectors, 465.8 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): C0ADB511-F73D-404A-B128-DD01509AE6EA
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 976773134
Partitions will be aligned on 8-sector boundaries
Total free space is 262150 sectors (128.0MiB)
Number Start (sector) End (sector) Size Code Name [Additional Info]
1 * * 200.0MiB EF00 EFI System Partition rEFInd currently installed here, mounts to /boot/efi
2 * * 185.8GiB AF00 OSX
3 * * 619.9MiB AB00 Recovery HD
4 * * 93.1GiB AF00 DMZ unjouranaled HFS+ shared partition
5 * * 4.0GiB 8200 Arch Swap
6 * * 128.0MiB 8300 Arch Boot ext2
7 * * 50.0GiB 8300 Arch Root ext4
8 * * 131.8GiB 8300 Arch Home ext4
And my fstab, made with genfstab after I mounted everything (except for the swap stanza, which I had to write):
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# UUID=2b121a89-aeb9-430a-8e6c-a05b79f08427
/dev/sda7 / ext4 rw,relatime,data=ordered 0 1
# UUID=efb41f69-6f99-4c8b-8431-01f3cd22c9cc
/dev/sda6 /boot ext2 rw,relatime 0 2
# UUID=67E3-17ED LABEL=EFI
/dev/sda1 /boot/efi vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed, errors=remount-ro 0 2
# UUID=[another long UUID]
/dev/sda8 /home ext4 rw,relatime,data=ordered 0 2
# UUID=[another long UUID] LABEL=DMZ
/dev/sda4 /dmz hfsplus rw,relatime,unmask=22,uid=0,gid=0,nls=utf8 0 0
# UUID=[another long UUID]
/dev/sda5 swap swap defaults 0 0
Last edited by rjmh (2014-04-04 08:35:20)

henriqueleng wrote:
I don't know about Mac computers but i use a uefi motehrboard,
To install it i created a partition with 512MB and i mounted /boot on there. all the rest of system are normal.
I use gummiboot, i don't know if its stuff on Mac. I think that ou should try another bootloader!
And why do you mounted two point on /boot?
/boot and /boot/efi?
Are you sure you're using uefi, my fstab looks just like his with the boot and efi partition. I'm pretty sure that's how the wiki says to set it up. That's the fstab for a laptop with uefi if it helps you out. I had problems with grub btw, so I had to set up gummiboot
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sdb3
UUID=0c1c97a3-0472-4141-a756-a03c00a4a3cf / ext4 rw,relatime,data=ordered,discard 0 1
# /dev/sda3
UUID=8a4412fa-5d4b-4de4-91ff-a4d05b3705e1 /home ext4 rw,relatime,data=ordered 0 2
# /dev/sdb2
UUID=971ed3e8-394d-46b3-b0d4-e8bb86b267cf /boot ext4 rw,relatime,data=ordered,discard 0 2
# /dev/sdb1
UUID=095C-CB43 /boot/efi vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
# /dev/sda1
UUID=12a4a2b1-6338-495a-8a41-474653eb227b /var ext4 rw,relatime,data=ordered 0 2
# /dev/sda2
UUID=846803f1-3f5b-48ae-9945-37e9725011b2 none swap defaults 0 0

Game does not start after installing on mac pro

Game does not start after new install on mac pro ?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

I installed windows 7 in macbook pro. but its booting only by windows not by mac. how to enter in mac?i installed windows 7 in macbook pro. but its booting only by windows not by mac. how to enter in mac?

i installed windows 7 in macbook pro. but its booting only by windows not by mac. how to enter in mac?

Hold Option key when starting - that gives you the option to choose between startup disks.

Hello i would like instal windows in my mac pro retina but i don't have boot camp

Hello i would like instal windows in my mac pro retina but i don't have boot camp

What version of OS X are you running on your MBPr?
If you open Applications > Utilities, you should see Boot Camp Assistant in that folder.
That is the utility which will create the partition into which you can install Windows that you have purchased from Microsoft.

Adobe PDF 9.0 shows up under Printers and Scanners (Mac OS) after re-installing Adobe Acrobat Pro 9.0

- recently re-installed Adobe Acrobat Pro 9.0 on my new Mac (OSX version 10.9.3)
- after re-installing Adobe Acrobat Pro 9.0 an icon called Adobe PDF 9.0 shows up under Printers and Scanners
- every single time I want to scan, my printer/scanner Brother automatically chooses Adobe PDF 9.0 as printer/scanner, although my printer/scanner Brother is set as standard printer/scanner
- did bring the issue under attention of Customer Service who directed me to this website

Hi Pieter,
Acrobat 9 has not been tested and is unsupported Mac Mavericks.
You might face compatibility issues with it.
Regards,
Rave

I just installed lion on several machines. They all show air drop in the finder window except my mac pro.

I can't get air drop to appear on my finder window in my Mac Pro. What to do?

The Mac Pro is probably too old. Please read Apple's article about Airdrop at:
http://support.apple.com/kb/HT4783

Bootcamp - Windows 8.1 - Mac Pro (Late 2013) -- ATI Driver Crash

Hi All,
I have a open case with Apple as well on this but i can not seem to locate any information on this issue on the web at all.
Case: 601052633
Basically, we received a new Late 2013 Mac Pro, and out of the box proceeded to install bootcamp and windows 8.1.
After the install and the bootcamp drivers are installed the screen starts to display lines and the ATi drivers eventually crash.
If we uninstall the ATI drivers the screen is returned to normal and windows uses the generic drivers, however the graphics performance is degraded.
If we install the latest ATI drivers (downloaded directly from the ATI webpage) the display issues reoccur.
If left to run its path the screen becomes unreadble and eventually the system bluescreens.
To recap all the things I have done:
Straight out of the box we started the boot camp install. We use the latest Windows 8.1 Media.
Once the process is completed the PC reboots as normal and we install windows on the “BOOTCAMP” partition.
Windows installs without issue and when the bootcamp drivers window pop’s up it starts its install. At the “Chipset” drivers install the window starts to flicker, this appears to be normal but afterwards the screen shows “lines” on it. (these lines can be seen on image below)
Once windows is booted the lines remain and progressively gets worse. Image below shows the ATI Criver crash and the blue screen. This takes 2-5 seconds. And depends on how much you move on the screen.
Screen capture (shown Below) shows the issues, even with screen capture the issue is recorded.
If we uninstall the ATI display drivers the issue disappears.
Process of tests:
Install Bootcamp windows 8.1 on Mac pro 2013 out of the box – Issue recorded
Remove Bootcamp and update firmware on Mac.
Install Bootcamp windows 8.1 on Mac Pro 2013 – Same issue.
Updated ATI Drivers using ATI drivers off ATI website – Same issue
Uninstalled ATI Drivers – 2 Generic Microsoft video cards detected – issue removed but video performance degraded.
Updated Bootcamp Drivers – ATI drivers reinstalled – Issue returned
Removed bootcamp, restored system to factory settings via web install.
Installed Bootcamp windows 8 on Mac Pro 2013 – Same issues
Removed bootcamp restored System to default
Tried installing windows 7 – not supported
Installed Windows 8.1 and ran screen captures and diagnostics.
We have also tried using different display ports, Different display adaptors, Different monitors.
Mac OS is not affected.
Note Mac is “out of the box”, Windows is a next next next install. No changes or software is installed.
Any support would be appreciated.
Cheers
Steffen.
It Manager.

I had this exact same issue and had been hunting it down since i first received my Mac Pro back in May 2014. I researched the problem all over the place but I have no idea why i did not find this post, or in fact why Apple techs did not find this post either.
Bottom line: In my case I have pretty much proved this was a problem with the AMD FirePro D300 video card/s. They basically can't cope with Windows graphics needs.
I have a new Mac with D500 cards, and now the problem is almost completely gone. I can recreate if i run certain situations and a screen saver. Upon refresh, there is a chance the card will crash, but showing a slightly different outcome.
Having read the prior posts, the D700 may also have the same issue??
Longer story and background: I am not exactly an expert, but i did try many different things and probably spent in excess of 200 hours onto tech support and installing, reinstalling, trying different monitors, trying different software. Eventually i was so frustrated and in tears with this issue.
The major problem over all this time was the constant response from Apple that this was not an Apple issue since the Mac OS was not showing any issues.
I was at the time a new Mac convert, my brother had purchased the 'awesome' machine for me as a birthday gift, with the goal that we could play a specific game together. My disappointment in Apples inability to recognize or even attempt to recognize that this was related to the hardware in the Mac itself was constant and ongoing.
My final visit to the Apple store to again visit the 'Genius' bar came up yet again with the most senior tech in the store telling me that there were no problems identified with the hardware and that this was not their issue. Totally frustrating. I was rather hoping, in the good tradition of true geeks, that this would have been a challenge to hunt down. I was pretty sure they trusted me that this was not a standard Windows issue, and thus was hoping they would switch out individual pieces of components (video cards being my first choice) to see if that the problem repeated. Nope, didn't want to do it.
My response was to threaten with legal action - not something i enjoyed doing, plus that i would NEVER buy an Apple product again. Since I was a new business client, this may have had an impact.
This wonderful Manager at the store agreed that he wanted to take the hardware out of the equation and see if I still had the issue. So he, amazingly, agreed to refund in full for the machine and I could order a new one.
As i was convinced this was hardware related, since I had the Quad core, D300's, 12 gig machine and my brother had the top of the range six processor, D500s, 16gig memory machine which did NOT have this issue, running identical software, when i reordered the Mac Pro, I bumped it up to the D500s (still Quad core) and 16gig of memory (also had the 1TB drive partitioned 40/60 in bootcamps favor).
I tentatively installed windows after a couple of days of normal Apple usage (software updates included).
I then hammered the system with the same software and installs.
Its been up and running for perhaps 2-3 weeks now, and I have not seen the issue at all, other then when i had screen saver running and 4 instances of the game running (Everquest for those of you who are interested - but the software is almost irrelevant, since i have had this issue using internet explorer or Chrome).
So.. I urge Apple to review this issue with the D300s and either remove them from the configuration options or resolve the issue. One of the powerful selling things for this wonderful machine is its ability to run Windows in native mode. I like it because I also want to get into App Development, so the dual option boot option is just what i wanted.
Responding to us poor Windows installers with 'not my problem' simply isn't good enough and should never have been something i had heard.
All good now, I am happy with the end result, but I would like Apple to recognize this IS AN ISSUE THEY NEED TO ADDRESS.
I apologize if my technical knowledge is not a strong as it might need to be in relaying this information to you guys, but hopefully it all makes sense.
Paul

If I put my 7300 in slot4 at 8x, and a 8800GT at slot1, 16x, could I boot 10.4.11 on my mac pro 1,1 if I unplug the monitor from the 8800GT?

If I put my 7300 in slot4 at 8x, and a 8800GT at slot1, 16x, could I boot 10.4.11 on my mac pro 1,1 if I unplug the monitor from the 8800GT?
I have different os's installed on my different hard drives. I'm using 10.6.8 now, but I go back to 10.5.8 and 10.4.11 on accasion. Can I run 10.4.11 with the 7300 in the 8x lane? As long as I unplug the 8800GT but leave it installed in the 16x slot1? And attach a monitor to the 7300?
What about using the 7300 to run extra monitors or a monitor while running 10.5.8 and 10.6.8? Is that a problem? I have 10GB Ram and the 1,1 original machine.

I know the 8800 requires 10.5.2, but if it is installed (at 16x) but no monitor is connected, will it allow the 7300 to control one or two monitors in 10.4.11? When the 7300 is in the 8x lane? And will it boot?
I lost part of your train of thought. Are you telling me to get just an ATI 5770 to continue using this machine into the future?
I thought the original mac pro 1,1 needed cards of the same manufacturer. If I use the 5770, that eliminates the ability to boot 10.4.11, correct?
What if I keep the 7300 handy in a box and put it in when I have to use 10.4.11? ( select the start up disc, shut down, change the card, restart) Does the 5770 require a power cable to another board that I might damage with repeated changes?

I already bought mac book pro last year but it can't view windows just like mac pro for education. I want to make like it. How?

I already bought mac book pro last year but it can't view windows just like mac pro for education. I want to make like mac pro for education How?

First, if you have a MACBOOK PRO (a laptop), you should post in that forum. MAC PRO (desktop) and Macbook Pro are different things, so when you use those terms interchangeably, it's impossible to know what you're talking about.
Second, even guessing that you have a laptop, I still have no idea what your question means. Are you trying to load Microsoft Windows on it? Every Mac can run Windows using either Boot Camp or Parallels/Fusion/VMWare solutions. Please explain in more detail what you're trying to do, and we'll try to help. But post in the Macbook Pro forum if you're talking about a laptop.
Matt

Which Hardrdrive should I install in Mac Pro, 13", Late 2011, 2.8Ghz i7 4RAM 750H

Please could you tell me Which Hardrdrive should I install in Mac Pro, 13", Late 2011, 2.8Ghz i7 4RAM 750H
Tx

Any 2.5" diam formfactor SATA HDD or SSD will be compatible. As a start, look at the representative sample available from OWC:
eshop.macsales.com/shop/hard-drives/2.5-Notebook/
It is very easy to do the installation yourself and it will be a lot less expensive.
Ciao.

Windows, games on mac pro

I am looking for some input about running windows on a mac pro and playing games under windows , for example steam games? Will the games play as good as on a pc? Anyone with experience with this?

Windows graphic card performance:
http://www.barefeats.com/harper11.html
Radeon 4870 vs GTX 280 (neither works in OS X at all)
http://www.barefeats.com/harper19.html
Radeon 3870
http://www.barefeats.com/harper17.html

Boot Camp: Mac Pro won't start after Windows install

After installing Boot Camp on a Mac Pro dual 2.66 (firmware updated), XP installer went through installation & copying files, then restarted. Went to a black screen with white Windows-style text that said something along the lines of "XP cannot start from this CD, press any key to restart." Totally unresponsive, held down power to restart. Will no longer power up. Have reset the SMC without any effect. Makes a brief sound when trying to start, but does not actually start up.
Is there any known power issue that I might be able to solve myself, or is the supply likely blown?
Mac Pro Mac OS X (10.4.8)

I put Vista on its own dedicated drive, 64GB Vista, the rest as FAT32 to make it easier to share files. I had to remove the OS X drives in order to allow Windows/Vista to install. Once installed, had a black screen and some blue crash screen, until I ran the BootCamp driver updates.
I would try unplugging your drive(s) first and see if you boot from Tiger Installer DVD - or better, boot Apple Hardware Test (hold down "d" on startup from Install Disk #1).

No boot option after Windows 7 install on Mac Pro

Similar Messages

Maybe you are looking for