No boot with: Restart holding cmd +r
I all,
I verified the hard disc on my mid 2010 3.06 ghz 10.7.3 iMac this morning to be greeted by a box telling me this disc was corrupt and that I needed to restart while holding cmd+r until the apple logo appears then to repair the disc.
at this point I would like to say that I am posting this from said iMac and it boots up normally and runs fine.
but,
when I start it holding cmd and 'r' let go at the apple logo the cog starts turning below the apple for about 10/15 seconds then the apple is replaced with a circle with a line through it (the cog keeps on spinning below it) it seems like it would just sit like this for ever - after about 5 mins I held the power button, turned it off, turned it back on again and just left it to boot up normally - no problems. thought I would try it again - turned it off, held cmd and r exactly the same as before......
what's going on then?! any advice greatly received.
Olly.
Yes, a problem with the disk. Hold the Alt/Option key while starting up: it will come up then with a choice of the harddisk and the recovery disk. Start from the recovery disk and in Utilities run Repair disk".
Similar Messages
-
My Imac is showing gray screen with red line when booting and restarts again
My Imac is showing gray screen with red line when booting and restart again, I can load it in windows 7 safe mode with red lines across the display, pls help
The graphic card is damaged. You can't do anything more than taking your computer to an Apple Store or reseller and getting your graphic card replaced.
Sometimes, when the graphic card is damaged, operating systems can't start. That's caused because the drivers that make the graphic card work detect an error, telling the operating system that the graphic card is unusable, so the operating system can't start and it restarts. However, you can start in safe mode because operating systems use a basic driver in this startup mode -
My computer won´t boot and restarts at Apple logo with the spinning thing
My computer won´t boot and restarts at Apple logo with the spinning thing and I can´t get it to work.
Before this happen I had left the computer on without a cable plugged in and so it ran out of power.
I just pressed the startbutton again after I´ve plugged it in and this problem started.
Any ideas?
Mattias
SwedenWRONG FORUM Sorry
-
My mac mini on booting keeps restarting.....help
Ok a quick look as what's happening with my mac
My mac mini mid 2011 model was running totally fine on os lion
Just few days back I updated to mountain lion
Installation was fine but on a restart showed me a error MSG that your
computer restarted because of a problem
But then my mac booted fine and I updated n installed latest software updates
Then on an average out of 10 shutdowns i did in 3 to 4 days the same error showed up 2 to 3 times
Then I checked the report showed some kernel thing ( the copy is below)
Then I used disk utility checked disk and disk permission it showed error and needs
To be repaired then on repairing it , it repaired and said all is ok
Then next shutdown was fine I thought problem solved
But next day when I tried to on my mac within a sec it showed a grey screen with some error in back ( Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting check photo ) and my mac kept restarting No apple logo to spinning wheel just on then grey screen then error MSG then restart and kept doing this
Then little google and then I did some first aid steps
Tried safe mode not successful
Tried disk utility option verified disc it showed errors again and this time said that disk cannot be repaired
Can open Internet recovery option also but before reinstalling my os I wanted to save my data
as I have no backup
My first and only priority is to save my data first and take a backup and then think of reinstalling os increase my ram or change hard disk so please guide me and by looking at my problem what you guys think it is an os failer ,hard disk failer or something else
My plan is to try
Transfer disk mode with another mac using thunderbolt ....and if that does not work
Then take out hard disk and try to use with hhd enclosure
If you have any nice tip that I can do to get n save my data please share thanks
My very first error MSG when I updated to mountain lion
Interval Since Last Panic Report: 101143 sec Panics Since Last Report: 3
Anonymous UUID: BB234586-D7BD-1093-26D3-60C7B60C7456
Thu Dec 27 16:17:57 2012
panic(cpu 0 caller 0xffffff80042b7bd5): Kernel trap at 0xffffff80042c3e10, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff806fd0b980, CR3: 0x000000000653a000, CR4: 0x00000000000606e0
RAX: 0xffffff803b265000, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000000000000040
RSP: 0xffffff804aef3ea0, RBP: 0xffffff804aef3f20, RSI: 0x0000000000000000, RDI: 0xffffff806fd0b980
R8: 0x0000000000000000, R9: 0x00000000000000ff, R10: 0x0000000000000000, R11: 0x0000000000000040
R12: 0x0000000000000000, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff8004739460
RFL: 0x0000000000010002, RIP: 0xffffff80042c3e10, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff806fd0b980, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff804aef3b40 : 0xffffff800421d626
0xffffff804aef3bb0 : 0xffffff80042b7bd5
0xffffff804aef3d80 : 0xffffff80042ce4ed
0xffffff804aef3da0 : 0xffffff80042c3e10
0xffffff804aef3f20 : 0xffffff80042c4175
0xffffff804aef3f60 : 0xffffff800423dcde
0xffffff804aef3fb0 : 0xffffff80042b26b7
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x0000000004000000
Kernel text base: 0xffffff8004200000
System model name: Macmini5,1 (Mac-8ED6AF5B48C039E1)
System uptime in nanoseconds: 20443013973142
last loaded kext at 12613841553883: com.apple.nke.ppp 1.8 (addr 0xffffff7f85e26000, size 49152)
last unloaded kext at 121337332706: com.apple.driver.AppleUSBUHCI 5.2.5 (addr 0xffffff7f84b41000, size 65536)
loaded kexts:
com.regularrateandrhythm.driver.RowmoteIREmu 1.0
com.huawei.driver.HuaweiDataCardACMData 4.27.04
com.huawei.driver.HuaweiDataCardECMData 1.36.02
com.huawei.driver.HuaweiDataCardECMControl 1.35.02
com.huawei.driver.HuaweiDataCardDriver 4.25.17
com.rim.driver.BlackBerryUSBDriverInt 0.0.74
com.apple.driver.AppleBluetoothMultitouch 75.15
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.12.69
com.apple.driver.ApplePlatformEnabler 2.0.5d4
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.3.1f2
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBT ransport 4.0.9f33
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleIntelHD3000Graphics 8.0.0
com.apple.driver.AppleIntelSNBGraphicsFB 8.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.AppleIRController 320.15
com.apple.AppleFSCompression.AppleFSCompressionTyp eDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTyp eZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleSDXC 1.2.2
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClien t 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.nke.ppp 1.8
com.apple.driver.AppleBluetoothHIDKeyboard 165.5
com.apple.driver.AppleHIDKeyboard 165.5
com.apple.driver.IOBluetoothHIDDriver 4.0.9f33
com.apple.driver.AppleMultitouchDriver 235.28
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.AppleBluetoothHCIControllerUSBTran sport 4.0.9f33
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleThunderboltDPOutAdapter 1.8.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.1.1
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.driver.AppleKeyStore 28.21
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOStorageFamily 1.8
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: Macmini5,1, BootROM MM51.0077.B10, 2 processors, Intel Core i5, 2.3 GHz, 2 GB, SMC 1.76f0
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 288 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR3, 1333 MHz, 0x802C, 0x344A53463132383634485A2D314734443120
Memory Module: BANK 1/DIMM0, 1 GB, DDR3, 1333 MHz, 0x802C, 0x344A53463132383634485A2D314734443120
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xE4), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: TOSHIBA MK5065GSXF, 500.11 GB
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8281, 0xfa113000 / 4
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: HUAWEI Mobile, 0x12d1 (Huawei Technologies Co., Ltd.), 0x1436, 0xfd120000 / 4Hello, did you repair the Disk, or just Permissions?
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
I suspect one of these is out of date or doesn't work with 10.8.x...
com.regularrateandrhythm.driver.RowmoteIREmu 1.0
com.huawei.driver.HuaweiDataCardACMData 4.27.04
com.huawei.driver.HuaweiDataCardECMData 1.36.02
com.huawei.driver.HuaweiDataCardECMControl 1.35.02
com.huawei.driver.HuaweiDataCardDriver 4.25.17
com.rim.driver.BlackBerryUSBDriverInt 0.0.74
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons -
Mac wont boot, auto restarts after about 10 seconds
Hello,
My friend's mac has broken and it starts to boot for about 10 seconds, then auto reboots. He has tried booting in safe mode (holding down shift) but it doesnt change. Does anyone know how to fix it? He thinks it may be a virus, so is there a way to get it working so he can install AV software?
Thanks, Black_Sirrah239Great Help so far, just to add...
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there. -
Will not boot with new hard drive
I used a SATA drive with adaptor as a boot drive in an MDD for most of the past year. I just got a MacPro 5,1 and wanted to use this SATA drive as a data drive in the new computer. I pulled it out of the MDD and put it in the MacPro. On start up I get the message You need to hold the power button or press restart. Since it has a boot volume I thought this might be a problem. I held down the Option key during start up to select a boot drive. Here it shows both the this drive and the OEM MacPro drive. Which ever I select I still get the error message. I can put this back in the MDD and get the same error even though it shows up as a boot volume when holding the Option Key. This drive does not seem to be totally dead since it can be seen during start up but it wont let the computer finish booting. It gets to the Apple logo but no farther. Can I salvage this drive? Data on it is unimportant.
You really need to use FW case; reformat the drive to use GPT partition table.
When booting the system's EFI polls all drives to look for valid system paths and to see which is blessed. A corrupt directory can even prevent booting from any drive or DVD.
I tell G5 owners to reformat as soon as possible once data is recovered, even though if they were running 10.5.8 their SATA drive may be okay.
Nuke the drive one way or another, I'd assume you have a spare FW case. And try booting from OS X DVD - you can install a fresh OS as backup/emergency system drive.
Any new SATA II or III drive are fine, WD Black are popular and 640 $69 or 1TB $89.
Have fun, I went from G4 MDD to Mac Pro over 4 yrs ago and it is still running strong -- and quiet! -
MacBook Pro Problem withe restart
i buy this mac from my Friend Still withe Good condition
15-inch, Early 2011
Processor 2 GHz Intel Core i7
Memory 4 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6490M 256 MB
Software OS X 10.9.5 (13F34) Before i was Use Yosemite 10.10.2 Same problem And More
i have many problems latle I trie so hard to fix but can't My problem withe ( restart ) the Pc Sadly restart i do down below
1- Restart the Nvram ( command + option + p + r ) many time Nothing change
2- hold down power button mac 15 Second ) Nothing Change
3-Open Disk utility when the mac open and repair + repair permissions ) The result No errors
4-Open Disk utility under the Booting withe command + r) I Do The. repair + repair permissions ) The result No errors
5- Open Diskdisk utility under the Booting withe command + Option + r) I Do The. repair + repair permissions ) The result No errors
6- I Delete the hard and make it ( GUID ) and re install 1 time from Cd 1 time From flash + 3 Time from Internet !!! Same Still Restart !
7- I Delete also the hard and And Clean It All withe 0GB And do the Same the procedure ) Same result !
8- I Take the Laptop to Apple Store In Jakarta ( Ratu Plaza mall ) the said you want to restart to ears All and download Again and the don't i do it 100 time before so no hardware problem = nothing Change > same result
9- some one told me the new Yosemite ( 10.10.2 ) Its still Not staible So downgraid the PC To Yosemite ( 10.10 ) < also nothing change Still many thing if i want top open will restart Example the( Camfrog ) ( Maps ) some Time i just Pouch it will restart !!
10. i Try also to this Time downgraid to ( OS X 10.9.5 (13F34) ). same same same
and i do all what can i do
Note:
when I tray to open the System under Safe mode i can Open any thing withe out restart !!
and i try to instill Windows 8.1 there is nothing happend so Smooth and fast
please I ask For Help Because my circumstances are not good I do not have enough money to buy
the error this
Anonymous UUID: BDAE5450-98B2-0CA3-B459-B40A82A5E592
Wed Feb 11 01:27:31 2015
panic(cpu 0 caller 0xffffff7fa972aeaa): "AGC GPU REGISTER RESTORE FAILED : rdar://7254528, VendorID invalid"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.6.22/src/Appl eMuxControl/kext/AGCPowerManagement.cpp:1114
Backtrace (CPU 0), Frame : Return Address
0xffffff80c2123de0 : 0xffffff8027a22f79
0xffffff80c2123e60 : 0xffffff7fa972aeaa
0xffffff80c2123ea0 : 0xffffff7fa972d650
0xffffff80c2123ec0 : 0xffffff8027eb359b
0xffffff80c2123f20 : 0xffffff8027a4a20a
0xffffff80c2123fb0 : 0xffffff8027ad7607
Kernel Extensions in backtrace:
com.apple.driver.AppleMuxControl(3.6.22)[32862231-50BC-3AF6-87A2-703321AE4F90]@ 0xffffff7fa971f000->0xffffff7fa9732fff
dependency: com.apple.driver.AppleGraphicsControl(3.6.22)[AA46D551-BE0F-33DA-93A3-8F46197BB 36F]@0xffffff7fa9706000
dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7fa832c000
dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7fa80bf000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7fa88f1000
dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[80899285-3952-30DA-A0F9-357C51E104 CF]@0xffffff7fa971a000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide: 0x0000000027800000
Kernel text base: 0xffffff8027a00000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 87384372209
last loaded kext at 42236080152: com.apple.filesystems.autofs 3.0 (addr 0xffffff7fa8f12000, size 45056)
loaded kexts:
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.14.34
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.ApplePolicyControl 3.6.22
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.AppleHDAHardwareConfigDriver 2.6.3f4
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.kext.AMDFramebuffer 1.2.4
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.AMDRadeonX3000 1.2.4
com.apple.iokit.IOBluetoothUSBDFU 4.2.7f3
com.apple.driver.AppleIntelHD3000Graphics 8.2.4
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleBacklight 170.4.11
com.apple.kext.AMD6000Controller 1.2.4
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleMuxControl 3.6.22
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleIntelSNBGraphicsFB 8.2.4
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleThunderboltIP 1.1.2
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyEventDriver 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.7
com.apple.driver.XsanFilter 404
com.apple.driver.AppleUSBHub 683.4.0
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleSDXC 1.5.2
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleUSBUHCI 656.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOAcceleratorFamily 98.23
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.kext.AMDSupport 1.2.4
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOBluetoothFamily 4.2.7f3
com.apple.driver.AppleSMC 3.1.8
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.driver.AppleThunderboltEDMSink 2.1.3
com.apple.driver.AppleThunderboltDPOutAdapter 3.1.7
com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
com.apple.driver.AppleUSBMultitouch 240.10
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.7
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleThunderboltNHI 2.0.1
com.apple.iokit.IOThunderboltFamily 3.3.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2 GHz, 4 GB, SMC 1.69f4
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Graphics: AMD Radeon HD 6490M, AMD Radeon HD 6490M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.7f3 14616, 3 services, 15 devices, 0 incoming serial ports
Serial ATA Device: TOSHIBA MK5065GSXF, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: IR Receiver
Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor. Please use copy and paste as screen shots can be hard to read.
Etrecheck – System Information -
I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?
I have a 2012 mac book pro can I use that to connect with firewire and load osx that way? and how woudl I do that?
Thanks so much!To what password are you referring? Do you mean your user account's admin password? Or do you mean the master password for File Vault or do you mean a Firmware Password?
For an admin password:
Forgot Your Account Password
For Snow Leopard and earlier
Mac OS X 10.6- If you forget your administrator password
For Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and
OS X Lion- Apple ID can be used to reset your user account password.
If you cannot do the above then try this:
1. Boot to Safe Mode by restarting and after the chime press and hold down the COMMAND-S keys until a black screen with white type appears.
2. At the prompt, type the following commands pressing return after each command line:
/sbin/fsck -yf
If you do not receive a "Filesystem OK" message then repeat this command until
you do. If after seven tries you still do not receive a "Filesystem OK" message,
then the system is corrupted and needs to be reinstalled.
mount -uw /
cd /private/var/db/netinfo
mv local.nidb local.old
rm ../.AppleSetupDone
shutdown -r now
The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
How to reset the OS X password without a startup CD:
Reboot into Single-user Mode. Enter the following and press RETURN after each command line
1. Type fsck -fy
2. Type mount -uw /
3. Type passwd <username>
I have never tried this method myself. -
I have a blue hanging screen with restart and I went to trade line stores and they refuse to help me saying that I didn't buy my iPad from trade line store ?
Your problem might be a easy fix.
If the firmware "forgets" what partition it's supposed to boot from, it won't load OS X, so if OS X doesn't load then it can't tell the fans to slow down, the default is "turbo mode".
So all you might have to do is hold the option/alt key down while booting the computer with a charged up battery on power, you will then see a row of icons and you pick OS X to boot from.
Once in you head to System Preferences and set the Startup Disk, that will tell the firmware what to boot from again.
Try it and see if it works.
You can do more if your problem is not fixed.
Step by Step to fix your Mac
Faica wrote:
I wanted to know if I am able to go to the apple store and will they help me even though I didn't buy it from them.
Yes, if it was purchased new you have a 1 year warranty, despite who you bought it from (unless it's stolen goods)
However you should purchase AppleCare while your in the store for another 2 more years of coverage also a backup drive for TimeMachine to protect your data. -
IMac G5 with new Seagate 250 won't boot with 10.4.8
I had to replace the original Maxtor 250 GB drive in my iMac G5 (17") today. It used to work perfectly with upgrade 10.4.8. But, the computer now fitted with a Seagate Barracuda 250 GB won't boot after 10.4.8 is installed. It does boot with the Tiger original install from the DVD. Something in the upgrade corrupts the drive. Maybe it is this specific drive, I don't know. There are errors reported by Disk Utility when I run it from the Tiger DVD after I've installed the 10.4.8 upgrade (from the web).
Did that happen to someone else ?
Zague
PB G4 17 (1.33) | iMac G5 17 Mac OS X (10.4.8)Welcome to the Apple Discussions!
This will probably solve the problem!
===================
| Repair the Disk Permissions: |
===================
-Search your installation DVD's.
-Insert the disc 1 and sthut down your Mac
-Start your Mac again while holding down the C key
-Now your Mac should boot from the CD, this can take some time.
-After a while you will see a installation screen where you can chose a language.
-Chose English and continue.
-Then click some time's next and agree with the "Software Agreement".
-Open Disk Utility. Top menu bar --> Utilities --> Open Disk Utility.
-Select your hard disk in the list of disks and volumes on the left side
-Go to the First Aid (tab somewhere on the right).
-Click the button to verify the permissions.
-Then Click the button to repair the permissions.
-Exit the Disk Utility and the installer.
-Restart your Mac
Hopefully this is helpfull or solved your problem.
Please see the "helpfull" and "solved" button's on top off this message! Apple: Why reward points? -
Can not start up on my Macbook pro. All I get is a grey spinning wheel. Tried all the Startup key combinations and nothing works. I reset the NVRAM and nothing. I booted with start up disk , ran disk repair and all is ok. Tried to re-install OS but when I get to designating drive its blank. When I go to startup disk there is a "?" mark. When I restart under startup disk search for a drive it still comes up with nothing. Before I got the grey spinning wheel I had a locked screen. Could not move curser or click on anything. Finally just shut down. Thank you in advance for any help!
Shouldn't still have a 'beachballing'... if the drive is being found and the system is trying to boot from it but is having problems, I would suggest looking over ds store's user tip - Step by step to fix your Mac.
It's likely either something corrupt in your system files or a failing hard drive. But follow ds's steps until you find the cause of the problem.
Good luck,
Clinton -
Dv2941se hard disk no boot with error Err2Err3
On my dv2941se laptop with AMD 64 x2 TK-57,4096MB total Memory Bios versionF.26 Running Vista 64 bit home premium.
When I turn on to boot I get the HP screen with function keys and then goes to black screen with cursor in upper left corner. When boot with esc I get memory passed, System Bios shadowed, Videobios shadowed, ATAPI CD ROM: HL_DT_ST DVD RAM GSA-T2ON, Fixed disk 0 Samsung HM250JI, Mouse initialized, and then full black screen and Err2Err3 appears in upper left corner and that's as far as the show goes. Will not boot any further no matter how long it's on. Any key I touch will repeat this error. When I boot up with my backup CD to perform an image backup which has been done up to the point that I can't boot anymore shows on the hardware screen that my hard disk C: is full. The D: drive that has the rescue for Vista and the small X:sector for boot looks like the number of sectors has not changed. Since this is OEM Vista I have no way to access C; in order to do a file check, or reformat is out. I cannot copy my latest backup because all sectors are written and the backup bombs. Not that familiar with Vista, is there anything I can do from here? I have no idea what is on each of the included 17 "installation "disks or will the last link of emergency " restore to factory conditions" (last resort) even going to work or has my hard disk turned to toast? I was doing a Microsoft software update at the time that this happened. I am on landline so it takes hours to do an update and I just let it run overnight to load the upgrades if it is more than 5MB in size. Phone line will give me 1.96 KB/sec. Someone please let me know how deep a dilemma I am in and how to possibly dig myself free. Thanks in advance.@elmozzar
Enter BIOS setup by tapping/holding the F10 key immediately after powering on the laptop.Use Diagnostics to test your hdd.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Macbook pro only boot with R key
I have a problem with a macbook pro .
I have snow leopard and after running onyx my computer only boot with the R key pressed , I have tried option-command-PR , reset SMC , repair permissions without success .
I have an external apple led cinema but with or without the error continues .
Any help would be appreciated.
ThanksWhy did you try booting with the R key pressed? From what I recall that key simply resets the screen settings, and shouldn't have anything to do with your system starting or not. I would remove it from the external display until we can get this resolved.
I'm wondering if it has something to do with your NVRAM. Try booting with this key sequence cmd-opt-n-v. -
On cold boot or restart, MacPro will not startup unless CD Tray is open. Any ideas why ?
hello Singyt, the bug report associated to this kind of crash indicates that it might be a malware related issue.
your crash report also shows a file named "urixalog.dll", which doesn't turn up any search hits on google, which is also slightly suspicious. could you search for that file on your pc and upload it to a site like virustotal.com in order to analyze it.
please do a full scan of your system with the security software already in place and/or a different tool like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes].
[[Troubleshoot Firefox issues caused by malware]]
edit: the bug report also suggests that a monitoring program named spector pro/360/... which essentially acts like malware, might cause the issue. in case you have that installed please remove it. otherwise [https://support.mozilla.org/en-US/kb/Firefox%20crashes%20when%20you%20open%20it#w_backdoor-ulrbot-c here] would be a removal guide for urixalog.dll -
IMac 2.4GHz (MA877LL) refuses to boot with 4GB ram, boots only with 3 GB
iMac 2.4GHz Core 2 Duo 20" Anodized Aluminum (MA877LL)
iMac 2.4GHz (MA877LL) refuses to boot with 4GB ram, boots only with 3 GB
2 x2GB Geil GX2S6400-4GDCA
Computer refuses to boot with both chips installed 4 GB.
Computer will boot and recognize 3 GB..( Apple 1 GB + 2 GB GEIL)
Both Geil Chips will boot, when paired with the Apple 1 GB chip.
machine recognizes 3 GB ram.
Please advise...Ensure the computer's RAM is fully seated down, and then try resetting the PRAM by holding down options-command-P-R at boot. The computer will make the boot chimes and then reset and chime again. When it chimes the second time release the keys and let the thing boot normally. Hopefully that will let it recognize the RAM.
Maybe you are looking for
-
Mail freezes while attaching file in Maverick
Problem: When I attempt to attach a file in Mail it freezes and is not reponsive. It requires me to force quit the program. Background: I just upgraded to OS X Maverick yesterday (10-24). Prior to this upgrade I did not have this problem. Mail ran gr
-
Mac OS X 10.6.8 - Xcode Question
I have an iMac OS X 10.6.8 and am trying to create an app for an iphone/ipad. I currently have Xcode 3.1, but is it true that to create an app that could be used you need the latest version? If so, I would need to update my mac to 10.8.4. Would I be
-
Hierarchy with FWD "table per child" FK column generation problem
I just faced with the problem which is described though example below: Entity A is superype including subtypes B, C and it contains primary Id attribute which is inherited by the subtypes. There is also D entity which has 1:M relation to A. When the
-
Hi Friends 1) While we do excise JV through J1IH does it make the part 2 entry in excise table ? If so than in which table? 2) In which table RG23A part1 &part 2 entries registered, while we do PGI & PGR for raw material? 3) In which table RG23C part
-
For apply a note, I need change a repository object in the workbench
Hello, For apply a note 852688 for the minisap WAS ABAP 6.40, I need change a object repository , I inserted the number 29671482393151224771 but This message is displayed "Incorrect Enter" .This number 29671482393151224771 appears in the page "Lic