No bootable device imac Bootcamp no superdrive
Hello Guys,
i will try to make it short, brief and straight to the point, hope you guys out there might help me in this problem
Hardware:
Imac 21.5 inch, Mid 2010.
OS X v.10.8.1 .
Superdrive(not working/ and i cant replace it because i live in libya).
i have a Samsung External optic usb drive.
32 GB thumbnail flash.
an original Win 7 Ulti 64 (and i have made an .iso of it)
now i want to install windows in my mac, because the superdrive is busted i cant install it using usb or usb optic drive (No bootable device), and even tried it with the rEFIt booting software, and to make it worst the make a bootable windows flash in bootcamp is nowhere to be found in my boot camp assistant. searched and looked everywhere but it with no luck.
so guys if you have a solution or know any thing that might help with problem please don't hesitate to share.
Cheers,
Sam.
P.s: a friend of mine who owns one of those original Apple superdrive that came with the mac Mini, do you think it might work?
Hi Sam, the Mini Optical may draw too much USB power.
Can you restore that .iso to the Flash Drive as a CD/DVD instead of an image file?
Similar Messages
-
No boot disk after creating a USB bootable device with Bootcamp Assistant.
Hi people, i was trying to install windows on my Mac Pro 4,1. I had to modify the Info.plist in Bootcamp Assistant to be able to make a bootable usb, after choosing and creating the bootable usb my mac rebooted and after i got into a black screen saying "no bootable device"...i tried Win7 and Win8.1 on 2 different USB sticks without any luck. Any ideas? Thank you!
Disregard this message. I give up.
-
10.9.2 install Bootcamp win7 64bit iMac mid 2010 no bootable device - external superdrive, USB Stick
Hey all,
big problem here.
Trying to install Bootcamp on my iMac 27" mid 2010.
The thing is, during the installation, i get the "no bootable device" black screen, and i think i know why... but i need help.
System, a mid 2010 imac, 2TB HD ( Original) and an SSD Samsung 1TB at the Optical Drive SATA connection.
2TB HD is empty atm. OSX Installed on the SSD.
Bootcamp Assistant. Problem nr. 1.
He first did not want to let me create an USB drive. after hacking the assistat, deleting the "Pre" thing in the info.plist, that worked so far.
https://discussions.apple.com/thread/5479879?start=105&tstart=0 and several other postings got me so far.
Then when using the assistant, after choosing partition and so, when the iMac restarts, i get the "no bootable device" notice.
Read a lot, and it seems, that older iMacs, that originaly came with an internal superdrive only can install win 7 from that internal superdrive.
I have the problem, that i had it removed to put the SSD there.
So, when doing an EFI Boot, choosing the win USB Stick or the Win in my External Superdrive, - "no bootable...."
So i searched more. rEFIt should help. Installed, and all, doesnt work, same thing. As soon as i want to boot Win from the CD or Thumpdrive, doesnt work. :-(
In one of the many posts, someone wrote something about starting Shell in rEFIt first, etc... didnt work as well.
then i found this post:
http://www.andrewsavory.com/blog/2011/2156
sounded promissing. Somehow getting win installation files onto the Created Bootcamp partion with Virtual Mashine. But it didnt work for me.
The VW Fusion ware is different, and non of the steps he discribes works.
So how can i get it working.. it seems like it is somehow blocked to access something from the USB Ports.
Logicaly i would have to get the installation files onto a Internal drive. i Tried to create a partition and copy the Win 7 USB Thump using Disk Util Progeam onto a seperate, internal partition.. but he just does not what to do that... errormessages when trying to copy it, recreate the drive, etc.
So, i do have a 2TB internal HD, which i can use, an external superdrive, USB.Sticks. any gameplan?
And for Error-excluding: i have an original Win 7 64 bit CD, a burnd one and controled the Hash of the loaded ISO, which i downloaded for the USB-Stick.
Any help? pls!!!Hi Sam, the Mini Optical may draw too much USB power.
Can you restore that .iso to the Flash Drive as a CD/DVD instead of an image file? -
Bootcamp "no bootable device" error while trying to install win7 on imac
Hello everyone,
I'm trying to install my original copy of windows 7 on my iMac 21,5 mid 2010 with mavericks as os.
This is what i do:
With my dvd of windows inserted in my cd/dvd reader I open bootcamp, i make the usb with drivers, i make the partition dedicated to windows and then the iMac restarts automaticcally.
When the iMac boots up a black screen (windowslike) appear saying : "no bootable device insert...etcetc and press any key"
First of all i'm using an external dvd reader because since i've upgraded to mavericks my superdrive stopped working (another big issue i've found out these days).
Then i've also tried making an usb bootable device....same black screen appeared.
I've been searching on the internet for days now without luck.
I believe i've tried everying but this funky situation keeps occourring.
I need to say that I installed windows on my iMac in the past and everything worked just fine, more then fine!
I need help please because i need windows on this machine due to working deadlines.
I'm desperate.
Help.Hello everyone,
I'm trying to install my original copy of windows 7 on my iMac 21,5 mid 2010 with mavericks as os.
This is what i do:
With my dvd of windows inserted in my cd/dvd reader I open bootcamp, i make the usb with drivers, i make the partition dedicated to windows and then the iMac restarts automaticcally.
When the iMac boots up a black screen (windowslike) appear saying : "no bootable device insert...etcetc and press any key"
First of all i'm using an external dvd reader because since i've upgraded to mavericks my superdrive stopped working (another big issue i've found out these days).
Then i've also tried making an usb bootable device....same black screen appeared.
I've been searching on the internet for days now without luck.
I believe i've tried everying but this funky situation keeps occourring.
I need to say that I installed windows on my iMac in the past and everything worked just fine, more then fine!
I need help please because i need windows on this machine due to working deadlines.
I'm desperate.
Help. -
I previously had Windows 7 on my Mac, but removed it after returning from deployment because it had a virus that I could not remove. The only way to remove was to insert a CD/DVD with the anti-virus on, but in my absence, the optical drive was not cleaned and did not work. I had only been using partition for college, so I removed it.
Now, six months later I am trying to re-instal Windows, but after creating the partition and inserting the disk into the external Superdrive, when Bootcamp reboots I get "No bootable device -- insert boot disk and press any key". Nothing happens, I can't even type on the screen. I can reboot to Mac via the alt-option key fine, and I can see the drives, the Windows CD, etcetera, but nothing works. When I go back to Mac, Bootcamp won't work unless I delete the partition over from scratch, but I'm getting the same result.
Is the computer looking for the internal optical drive (which doesn't work, and can only be repaired by sending the whole thing back to Apple)? Is there a way to default to the external optical drive?
Thanks.Bob, thanks. I misread the PDF (font on phones is difficult to see). Got it fixed now.
-
IMac 27' (Late 2009) Installing Windows w/USB: NO BOOTABLE DEVICE
Hi everyone!
First of all, sorry about my english. I've been reading a long time before a write this post on the forum, but... here we go.
I have an iMac 27' (Late 2009 with Mountain Lion) without Superdrive (there's an SD card stucked. I tried to pick it back but it useless). I need Windows Vista/Seven to work with some software and Parallels don't work properly. So, I managed to make some USB Windows bootable ISO (a lot of them), but after trying with bootcamp the partition on Mountain Lion there's a message on a black screen (after rebooting for the first time) that says "NO BOOTABLE DEVICE- PLEASE INSERT ANY KEY TO CONTINUE".
I tried with a few USB devices, and some .iso of windows extract from a few DVDs, and i'm getting always the same message.
When I had Snow Leopard and Lion (and SUPERDRIVE available) I was able to install Windows, but always with DVD. I didn't try it to boot Windows with a usb device. I already downgraded to Lion and try it again with no luck.
Anyone please can help? I'm really stucked at this point .Same for me... And the funny thing is that I was trying the same bootable device with which I installed Windows 7 in a mid 2009 MacBook. Completely absurd. Please, we need some solutions for this!
-
Bootcamp will not load Windows installer - No bootable device, insert disk then press any key
Hello, I recently decided to install bootcamp onto my 2009 27" iMac, I have done this before for other people's computers and I thought it would be no different for my own. However, on attempt to install the Windows disk, instead of starting the installer it only gives me an error message saying No bootable device, insert boot disk then press any key. I have tried ejecting the disk and then putting it back into my disk driver but it still seems to give me the same error. I went back into my Mac using Alt(option) key on startup and then set the startup disk as the Windows installer disk but it doesn't seem to make a difference. I also tried booting the disk directly from the startup disk menu is the alt(option) key on startup but that didn't do anything different either.
Suggestions would be greatly appreciated!
Also if it helps my computer is a
2009 27" iMac running OSX 10.8.4
And my disk drive is an external drive because my internal SuperDrive went out.That last point is your problem, Boot Camp doesn't really like booting from external drives.
You will have to do the following (assuming Boot Camp already partitioned your hard disk):
1. Use Disk Utility to make a CD/DVD Master of the Windows Install Disc.
2. Rename the resulting *.cdr file so it has an *.iso extension.
3. Insert a USB Flash Drive (8GB or more) into a USB port and start Boot Camp Assistant.
4. Make sure only "Create a Windows 7 or later version install disk" is checked.
5. Follow the directions, selecting the USB Flash Drive as the destination, and the *.iso as the source.
You should now be able to boot from and install Windows from the USB Flash Drive. It's annoying, but I had to do that.
You will need a second flash drive of 1GB or more, or 700MB or more extra space on the install disk to place the boot camp support files, which will need to be installed. -
Bootcamp - No bootable device -- insert boot disk and press any key help plz
Hello there!
I recently upgraded my imac mid 2010 system with a SSD hard-drive. The old "main" drive went to the place of super-drive and after reinstalling OS X into the new drive and wiping the old drive a very interesting problem happened. I started trying to install windows 7 via bootcamp. I did everything what the bootcamp assistant says and after the imac restarts itself it just says No bootable device -- insert boot disk and press any key. Firstly I thought that maybe something is wrong with the installation disk (i have an external super-drive connected to the imac). After restarting the imac once again i held down the option button and arrived to the screen, where it shows the avlaible boot options (different disks). Now, what I saw, was funny. The bootcamp assistant had'nt created the bootcamp drive at all. Atleast it did not show it. After doing this two-three times the result was the same. My next idea was that maybe, there is an issue with the concrete SSD model I am using. So I went back to OS X and opened the bootcamp assistant and restored the state of the OS X SSD drive. Next I did an bootcamp partition onto the old drive I have installed. But the result is still the same. Now my head is empty of ideas.
Has anybody had a similar problem and can you please give me tutorial what I did wrong or what to try next?
Thanks.
Indrek.Hi Michael!
Yep, I did get this running. Not in a normal way (meaning the easy way). What I did, is that I just created the BOOTCAMP partition in OS X. Just let it format and create the partition where you would install BOOTCAMP.
After that I discovered that via a ISO program (WinClone) you can directly restore a previously created OS X boot image to your current computer. So, I installed a blank Windows 7 to my macbook pro, didint install any drivers and just let it work up then. Then I went back to os X (in macbook pro) and made a bootimage for the BOOTCAMP partition. After that I saved it to my external harddrive and wired it to my iMac. In iMac I just downloaded the same boot-image program and restored the bootimage that I made in Macbook Pro to iMac. After that I made an restart and the bootcamp section with windows worked well with my iMac. Install the bootcamp soft and you can do everything and everything works. FYI, you get the windows working via those steps, BUT if you either delete or do anything to make your bootcamp partition unworkable then you will have to repeat those steps again. But it´s fast non-the-less, so it shouldn´t be a problem for you.
If you didin´t understand anything or something doesen´t add up, send me a letter or a notification.
Hope this helps.
Indrek. -
Bootcamp Win 7 No bootable device -- Insert boot disk and press any key.
Hello everybody, I bought a windows 7 to install with bootcamp in my MBP retina, it came buy post, a windows 7 ultimate, OEM, and for my surprise it came with a DELL computer reinstallation CD, well, I search the Internet and some guys were receiving the same CD, and the web sites were saying that it works perfectly. So, I started to install it with boot camp.
I format my USB 16 gig from scandisk for (DOS FAT) in utility's on my mac, and I went to BOOT CAMP to install the windows. As I have a superdrive and the CD from win 7, I didnt select the option of creating a image of windows 7 (the first option) and I just select the other two. So the bootcamp asked me to connect my USB stick for downloading the windows drivers, and after downloading he opened the partition screen, I choose 30 gig for my windows partition and pressed continue, after that the boot camp asked me if I have a windows installing cd, and I clicked yes, Next window, " If you have an installation CD the boot camp will delete the boot from your USB stick, press continue, and I did. After that my mac reboot, and now I have the message " No bootable device -- Insert boot disk and press any key"
It doesnt boot with the USB stick.
It doesnt boot with my cd
ALT CMD doesnt work.
No MAC no Windows? Sheeee
Please help me if you can.
I have done a backup before.You should take your Boot Camp discussion to the Boot Camp forum, https://discussions.apple.com/community/windows_software/boot_camp, where the "no bootable device" issue has been asked and answered many times.
-
"No bootable device --- insert boot disk and press any key" after setting up Bootcamp
Hi guys,
I am trying to install Windows 7 via Bootcamp but after setting up Bootcamp and restarting the computer I get the error message "No bootable device --- insert boot disk and press any key".
I use an iMac with a DIY Fusion Drive consisting of a 120 GB SSD and a 1 TB HDD.
Since Bootcamp can only be installed on the HDD I believe disk1 is the interesting one. Here is the output of sudo gpt -r -vv show disk1:
gpt show: disk1: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: disk1: Suspicious MBR at sector 0
gpt show: disk1: Pri GPT at sector 1
gpt show: disk1: Sec GPT at sector 1953525167
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 1709658208 2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
1710067848 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1711337384 88
1711337472 242186240 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1953523712 1423
1953525135 32 Sec GPT table
1953525167 1 Sec GPT header
And the output of sudo fdisk /dev/disk1:
Disk: /dev/disk1
geometry: 121601/255/63 [1953525168 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 0 0 2 - 25 127 14 [ 1 - 409639] <Unknown ID>
2: AF 25 127 15 - 1023 254 63 [ 409640 - 1709658208] HFS+
*3: 07 1023 254 63 - 1023 254 63 [1711337472 - 242186240] HPFS/QNX/AUX
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
Here is also the list of my disks:
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *120.0 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 119.7 GB disk0s2
3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage 875.3 GB disk1s2
3: Apple_Boot Recovery HD 650.0 MB disk1s3
4: Microsoft Basic Data BOOTCAMP 124.0 GB disk1s4
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS FusionDrive *975.5 GB disk2
Logical Volume on disk0s2, disk1s2
FFA13FBC-2001-40B7-8BBB-BE6EECF8AC11
Unencrypted Fusion Drive
/dev/disk3
#: TYPE NAME SIZE IDENTIFIER
0: GRMCPRXFRER_DE_DVD *3.2 GB disk3
I have gdisk installed and am ready to mess around. Any help would be greatly appreciated!So, when I started my iMac yesterday morning it couldn't boot into OS X anymore either. Several hours of restoring later I am back to square one. I tried installing Windows 7 via Bootcamp again but got the same error message. This time I noticed though that Bootcamp asked me to remove the bootable option from the USB drive with the support drivers in order to install from DVD. Does that ring any bells? I am building another USB drive right now, hoping it would ask me again but this I will decline and try to boot from it.
When you restored, was a Time Machine restore used? TM does not backup Bootcamp and does an erase of the partition. It may also erase the entire disk (including the Fusion drive) if the specific backup of the volume layout of the disks indicates a pre-Bootcamp layout.
My MacBook Pro is a 2009 model and also once had a built-in optical drive. I have no idea why it would work on there but not on the iMac.
You also wrote
When I plug the external DVD drive in, the boot manager recognizes a "Windows" disc and an "EFI Boot" disc. If I select the "Windows" disc I get a black screen with a blinking dash.
The blinking dash indicates that it is working, but does not have the requisite drivers to enable the GPU/Mouse/Keyboard on the media being used.
In the MBP case, did you have two drives installed in the MBP, a Fusion configuration, and then were able to successfully install Bootcamp?
For example on a Mac mini I have a DIY Fusion drive, but the sequence was done differently. Bootcamp was installed using a USB stick+Windows 7 ISO.
1. The two disks are not in a CoreStorage set up initially.
2. The second disk is partitioned (64Gb) and a Bootcamp W7 install completed via USB (this is different HW as compared to IMac, because it has no Optical drive).
3. After the HDD is partitioned, the first partition and the SSD are then used to create a CoreStorage volume.
4. Here is the working version and disk layout. (I plan to erase both disks, put W7 on a partition on the SSD, and make the non-Bootcamp+entire HDD in a CoreStorage volume).
diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group A8C00490-0E14-401F-AB69-59F37724E8C4
=========================================================
Name: Fusion
Status: Online
Size: 1190201270272 B (1.2 TB)
Free Space: 0 B (0 B)
|
+-< Physical Volume 4772013B-5520-4801-9BE5-BCAEF4AEDAB3
| ----------------------------------------------------
| Index: 0
| Disk: disk0s2
| Status: Online
| Size: 255716540416 B (255.7 GB)
|
+-< Physical Volume A679A101-3C78-4A59-B5EE-A4339210CFAD
| ----------------------------------------------------
| Index: 1
| Disk: disk1s2
| Status: Online
| Size: 934484729856 B (934.5 GB)
|
+-> Logical Volume Family 5EF5C7CA-0B9C-4169-82A1-41C84F206672
Encryption Status: Unlocked
Encryption Type: None
Conversion Status: NoConversion
Conversion Direction: -none-
Has Encrypted Extents: No
Fully Secure: No
Passphrase Required: No
|
+-> Logical Volume 1512657C-ED13-4B31-82C6-7AECBBCA7F98
Disk: disk2
Status: Online
Size (Total): 1185508581376 B (1.2 TB)
Conversion Progress: -none-
Revertible: No
LV Name: Fusion HD
Volume Name: Fusion HD
Content Hint: Apple_HFS
diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *256.1 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 255.7 GB disk0s2
3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage 934.5 GB disk1s2
3: Apple_Boot Boot OS X 650.0 MB disk1s3
4: Microsoft Basic Data BOOTCAMP 64.9 GB disk1s4
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Fusion HD *1.2 TB disk2 -
IMac saying no bootable device in startup
Please someone help me!!
Ok, so I wanted windows 7 for my iMac so I created a bootcamp partition and installed windows 7 on my iMac. Everything was running smooth than today booting my mac it showed me (no bootable device insert boot disk and press any key)
Also I tried the alt opinion key and it didn't work, I don't know if it's my keyboard because yesterday I spilled a little bit of chocolate on it, and from yesterday my keyboard was acting strange.
So please someone help, I feel as if it's the keyboard but I don't know for sure. HelpThen you need to do this:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This may help but if not then you will need to erase the OS X volume then reinstall as below:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
"..no bootable device insert boot disk and press any key", i restarted my mac and held options and managed to log in to my OS x again but my windows wasn't installed and when i held options while my mac was starting the usb flash drive wasn't there, what should i do? Also can i restore my usb flash drive to use it as a regular flash drive again?
Hi Michael!
Yep, I did get this running. Not in a normal way (meaning the easy way). What I did, is that I just created the BOOTCAMP partition in OS X. Just let it format and create the partition where you would install BOOTCAMP.
After that I discovered that via a ISO program (WinClone) you can directly restore a previously created OS X boot image to your current computer. So, I installed a blank Windows 7 to my macbook pro, didint install any drivers and just let it work up then. Then I went back to os X (in macbook pro) and made a bootimage for the BOOTCAMP partition. After that I saved it to my external harddrive and wired it to my iMac. In iMac I just downloaded the same boot-image program and restored the bootimage that I made in Macbook Pro to iMac. After that I made an restart and the bootcamp section with windows worked well with my iMac. Install the bootcamp soft and you can do everything and everything works. FYI, you get the windows working via those steps, BUT if you either delete or do anything to make your bootcamp partition unworkable then you will have to repeat those steps again. But it´s fast non-the-less, so it shouldn´t be a problem for you.
If you didin´t understand anything or something doesen´t add up, send me a letter or a notification.
Hope this helps.
Indrek. -
How to fix bootcamp error: No bootable device --- insert boot disk and press any key
Hi everybody,
It seems that I triggered a bootcamp "bug" that involve the malfunction of the partition hierarchy after the creation of a new partition.
After some work I managed to get back again bootcamp in bootable partitions choice window, but if i select it and reboot the system
i get this error:
No bootable device --- insert boot disk and press any key
I think something is wrong with the assignment of the bootable partition, maybe is looking for windows in the wrong partition.
Any idea?
OSX 10.10.1
Bootcamp with Win 7I have an ISO image and I burned it to a dvd. I know how to boot back into my Macintosh HD. I just need help on finishing the Windows install. On my iMac it says I have a partition named BOOTCAMP.
-
How do i quit bootcamp when it say "No bootable device -- insert boot disk and press any key"
Hi,
How do i quit bootcamp when it say
"No bootable device -- insert boot disk and press any key"
cuz i resraart my imac and the nextday i went to use my imac i just say mi that.
Can you please help mi out ?Reboot holding down the Option key between the tone and the apple logo w/pinwheel. When the boot manager gives you a selection of boot partitions, choose your Lion partition. Once booted, go to System Preferences > Startup Disk > select your Lion partition.
Regards,
Captfred -
No bootable device found 5K iMac..HELP!!! Please?
Ok so here's where I am at on my 2014 5K iMac:
1. Used 16 GB USB 2.0 thumbdrive and an official Windows 7 ISO.
2. Bootcamp created the WININSTALL disk flawlessly complete with necessary drivers.
3. Created a 60GB partition via Bootcamp.
4. iMac restarts and boots to blank screen and then says "No bootable device found - insert boot disk and press any key"
I never removed the thumb drive, followed bootcamp's instructions to the letter, and made sure all other usb drives were removed. Again, bootcamp was working fine until the restart and the inability to read the bootable drive bootcamp JUST CREATED. Any idea what may be going on?
I have included a snapshot my system specs and I am running a 1TB Fusion Drive.
When I start up back into Yosemite I can even see a new drive labled "BOOTCAMP" (picture also included)
I have also restarted while holding the option key and manually selected the "Windows" drive and I STILL come to the same blanks screen with the same message.
Seriously, ***? Beginning to dislike my iMac now. I don't understand why this must be so difficultISO is a Win 7 Home Premium SP1 X64 only. 3.7 GB total. No other versions of Windos or x86 versions attached.
Here is my screen output:
Last login: Sun Mar 8 09:58:34 on ttys000
DEREKs-iMac:~ derekrevella$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *121.3 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 121.0 GB disk0s2
3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage 937.3 GB disk1s2
3: Apple_Boot Recovery HD 650.0 MB disk1s3
4: Microsoft Basic Data BOOTCAMP 62.0 GB disk1s4
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Macintosh HD *1.1 TB disk2
Logical Volume on disk0s2, disk1s2
D8910214-0CC0-433C-967E-12C8B2EF494A
Unencrypted Fusion Drive
/dev/disk3
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk3
1: EFI EFI 209.7 MB disk3s1
2: Apple_CoreStorage 999.9 GB disk3s2
3: Apple_Boot Boot OS X 134.2 MB disk3s3
/dev/disk4
#: TYPE NAME SIZE IDENTIFIER
0: FDisk_partition_scheme *2.0 TB disk4
1: Windows_NTFS My Book 2.0 TB disk4s1
/dev/disk5
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Time Machine *999.5 GB disk5
Logical Volume on disk3s2
C95A6680-EB2B-4898-9F29-5EECACFB4814
Unlocked Encrypted
DEREKs-iMac:~ derekrevella$ diskutil cs list
CoreStorage logical volume groups (2 found)
|
+-- Logical Volume Group 2EDB8807-AFCF-41E1-BCDA-6F438470F393
| =========================================================
| Name: Macintosh HD
| Status: Online
| Size: 1058333908992 B (1.1 TB)
| Free Space: 114688 B (114.7 KB)
| |
| +-< Physical Volume 0C09A2C5-498E-4D35-8ACA-84B264462D96
| | ----------------------------------------------------
| | Index: 0
| | Disk: disk0s2
| | Status: Online
| | Size: 120988852224 B (121.0 GB)
| |
| +-< Physical Volume 1E0F380B-D81B-479D-BC16-EC8D264BF33A
| | ----------------------------------------------------
| | Index: 1
| | Disk: disk1s2
| | Status: Online
| | Size: 937345056768 B (937.3 GB)
| |
| +-> Logical Volume Family B15B0DBE-A3A8-42B6-B655-F343E7783511
| ----------------------------------------------------------
| Encryption Status: Unlocked
| Encryption Type: None
| Conversion Status: NoConversion
| Conversion Direction: -none-
| Has Encrypted Extents: No
| Fully Secure: No
| Passphrase Required: No
| |
| +-> Logical Volume D8910214-0CC0-433C-967E-12C8B2EF494A
| ---------------------------------------------------
| Disk: disk2
| Status: Online
| Size (Total): 1052478537728 B (1.1 TB)
| Conversion Progress: -none-
| Revertible: No
| LV Name: Macintosh HD
| Volume Name: Macintosh HD
| Content Hint: Apple_HFS
|
+-- Logical Volume Group 8D28A59C-F3FC-4F88-AB3D-A84CE9412D25
=========================================================
Name: Untitled
Status: Online
Size: 999860912128 B (999.9 GB)
Free Space: 5943296 B (5.9 MB)
|
+-< Physical Volume E396DF7A-22A9-4CD3-B9B8-AD36EBC06BFE
| ----------------------------------------------------
| Index: 0
| Disk: disk3s2
| Status: Online
| Size: 999860912128 B (999.9 GB)
|
+-> Logical Volume Family 3042FBEB-10F0-4101-8A38-351029136F95
Encryption Status: Unlocked
Encryption Type: AES-XTS
Conversion Status: Complete
Conversion Direction: -none-
Has Encrypted Extents: Yes
Fully Secure: Yes
Passphrase Required: Yes
|
+-> Logical Volume C95A6680-EB2B-4898-9F29-5EECACFB4814
Disk: disk5
Status: Online
Size (Total): 999502643200 B (999.5 GB)
Conversion Progress: -none-
Revertible: No
LV Name: Time Machine
Volume Name: Time Machine
Content Hint: Apple_HFS
DEREKs-iMac:~ derekrevella$ sudo gpt -vv -r show /dev/disk0
Password:
gpt show: /dev/disk0: mediasize=121332826112; sectorsize=512; blocks=236978176
gpt show: /dev/disk0: PMBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 236978175
start size index contents
0 1 PMBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 236306352 2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
236715992 262144 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
236978136 7
236978143 32 Sec GPT table
236978175 1 Sec GPT header
DEREKs-iMac:~ derekrevella$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 14751/255/63 [236978176 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 236978175] <Unknown ID>
2: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
3: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
DEREKs-iMac:~ derekrevella$
Maybe you are looking for
-
Thoughts are to allow groups of individuals mobile numbers to be shared across larger organizations, from within a PDF document, that the mobile numbers would be clickable, and open up a Text or instant messaging application on either the computer, t
-
Half-Life 2 "The Orange Box, and Steam
Is there an "easy" way to get Steam installed? I thought it use to be easy to install it, and it seems to be a lot harder now. I believe just a few weeks ago, you could install with a typical "wine /media/cdrom0/Setup.exe". Now I get permission erro
-
What is best app for photo slide show with music
Photoshop, Elements, or LR - for photo slide show with music
-
Constructor method, Can you easily solve the issue?
I have had many problems intergrating a constructor method into my program. This is my first time programming in java, can someone please help me. I have contructed a class for an airplanelisttester, that allows the user choice to add or remove plane
-
Isight issues & finder problems
my macbook has been acting a little weird lately - i had issues getting it to shut down & restart over the weekend and then today when i turned it on the green light of my isight is on and i cant get it to turn off. if you open up an application like