No bootable device -- insert boot disk and press any disk

Pleeeeessssssseeeeeee help. I was trying to setup bootcamp but when it came to instaling windows it came up with a black screen and then after 5 or so minutes it powered down. Then when I turned it on from the power button at the back of imac 21.5 inch it took longer than usaul on the white startup screen displaying no apple symbol. Then the screen went black and displayed the words "No bootable device -- insert boot disk and press any key" I have a wireless key board and doesn't conect to the mac until after startup so I cannot hold down the option key (ALT). I have ordered a wired keyboard but will take quite long to get here. Is there a way to fix it without a keyboard or mouse bearing inmind it is an all in one.
Thanks
george292

See this discussion for a possible solution in case Allan's suggestion is not the problem. Also look to the right side of the page for other possible discussions with solutions.

Similar Messages

No bootable device --- insert boot drive and press any key?

A while back I tried installing windows 7 on the iMac which is now running on Mountain Lion. Installing windows wouldn't work. I tried every possible option and tried so many times to get it to work but it wouldn't. Now I have another issue. I went to disk utility and have erased the partition that was created. Except everytime that I boot up my iMac, it tells me
No bootable device --- insert boot drive and press any key?
I have no idea how to get rid of that. I have to always hold down option so that I can choose my apple partition. I was reading online and people say that there is a problem with the Hard Drive, that Master Boot Record is currupt. How do I fix that? Would I need a new harddrive? I dont care if I have to loose all my files, except I dont want to beleive that the only way to fix it is to reinstall Mountain Lion, because in the process of trying to install Windows 7 I reinstalled Mountain Lion like 3 times... So doubt that reinstalling Mountain Lion would fix this issue. Is something wrong with my Hard Drive and is there a away to fix it?

Do a PRAM reset, open System Preferences > Startup Disk and select Macintosh HD

No bootable device -- insert boot disc and press any key

Hello, I'm trying to install Windows 7 on BootCamp. I have iMac 2010. My CD-ROM is broken, i can't put CD into it. So, i use external CD-ROM. I burned DVD with windows 7 ISO file, started BootCamp Assistant, My computer restarted and then i have black screen with "No bootable device -- insert boot disc and press any key
So i can't continue installing Windows. On Mac os DVD is visible and everything is OK, but when restarting - i cant boot from it. How to install it?
Thank you.

hrsrt wrote:
I burned DVD with windows 7 ISO file
Just burning a ISO onto a DVD wont make the DVD bootable.
Look here: http://support.microsoft.com/kb/977640
Lupunus

After attempt to install windows 7 via boot camp onto Mac mini, my screen reads "no bootable devise--insert boot devise and press any key. However, disk still in reader, and not using a Mac keyboard

After attempt to install windows 7 via boot camp onto Mac mini, my screen reads "no bootable devise--insert boot devise and press any key. However, disk still in reader, and not using a Mac keyboard

Reboot your Mac, as soon as you hear the chime press the option/alt key and hold it until the boot manager appears, select OSX to boot from.

Get "no bootable device- insert boot disc and hit any key" error

Hp G72 Laptop, Windows 7 64 bit,
"no bootable device-insert boot disc and hit any key" (I have no boot disc.)
I was in the process of replacing the hard drive and the computer was starting the final phase after copying all files. When it restarted the first time, I got the message. I was getting this message randomly prior to replacing the hard drive and if I turned it off for 2 or 3 hours and turned back on I would not get the message. The reason for replacing the hard drive was a "Smart Disc " imminent failure error message.

Yes and yes. The final recovery disc had completed and it was moving to the next phase. It said the computer would restart several times during this phase and when it went to the first restart, the error message came up and I could proceed no further. I ctrl/alt/del and restarted, pressed escape to get the start-up menu but was lost at all the options. The information screen looked like the old hard drive info.

When I turn on my iMac, it shows a black screen and says 'No bootable device - enter boot cd and press any key'. Not sure how to fix this.

When I turn on my iMac, it shows a black screen and says 'No bootable device - enter boot cd and press any key'.
I'm not sure what to do, I did not recieve a cd with my mac to boot it up (I ordered it online).
Also I can't find my harware serial number (I've tried many times to input what I thought it may be from my receipt). I saw that I need this number to contact apple support, my 90 day complimentary support is still valid so I wish to contact them.
I don't know much about apple products as this is my first apple computer so any information is helpful.

Hold down the Alt/Option-key at startup of your iMac to get the Boot Selection screen.
From that choose to boot into OSX.
Once in OSX go to System Preferences then Startup Volume and reset your OSX to be the default.
The new iMacs have OSX 10.7 Lion preinstalled and don't come with any CD/DVD anymore.
Instead OSX Lion includes a new feature called "Lion Recovery".
Have a read here About Lion Recovery
Stefan

Installing Windows 7 on iMac via external superdrive resultes in "No bootable device-insert boot disck an dpress any key".

I previously had Windows 7 on my Mac, but removed it after returning from deployment because it had a virus that I could not remove. The only way to remove was to insert a CD/DVD with the anti-virus on, but in my absence, the optical drive was not cleaned and did not work. I had only been using partition for college, so I removed it.
Now, six months later I am trying to re-instal Windows, but after creating the partition and inserting the disk into the external Superdrive, when Bootcamp reboots I get "No bootable device -- insert boot disk and press any key". Nothing happens, I can't even type on the screen. I can reboot to Mac via the alt-option key fine, and I can see the drives, the Windows CD, etcetera, but nothing works. When I go back to Mac, Bootcamp won't work unless I delete the partition over from scratch, but I'm getting the same result.
Is the computer looking for the internal optical drive (which doesn't work, and can only be repaired by sending the whole thing back to Apple)? Is there a way to default to the external optical drive?
Thanks.

Bob, thanks. I misread the PDF (font on phones is difficult to see). Got it fixed now.

Error message on screen: No bootable device -- insert boot disk and press any key comes on

Error message comes on screen: No bootable device -- insert boot disk and press any key. What do I do?

Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
If the above is not possible or failes, then replace your hard drive.

"No Bootable Device -- insert a boot disk and press any key" Error Message.

Last month I just got a HP netbook (HP Mini 110-3100) and when I got it from the box, the error message; "No bootable device -- insert a boot disk and press any key" appeared. But then I managed to boot up the netbook normally. After that, I can use the netbook normally but the error message keeps appeared and becomes more frequent and now I even cannot turn on the netbook.
Is it a hard disk failure?
p/s: yesterday accidentally I can turn on the netbook without any problems. Did a lot of Hard Disk Maintenance by some softwares downloaded from the internet. But now already cannot turn on.
p/s/s: i have no cd/dvd drive, and also no 8GB usb drive.
p/s/s/s: what should i bring if i want to send the netbook to the HP centre? just bring the netbook?

I would suggest try and reseat the hard drive and check...If you still have the issue, than take it to the service center...And you will need to take only netbook to Service center...
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Mac Mini - "No bootable device - insert boot disk and press any key"

When trying to install windows 8.1 from dvd on late 2012 Mac mini.
When the machine reboots after creating the ms-dos partition. I receive the foolwing error
No bootable device -- insert boot disk and press any key
The only drive I have connected is the Superdrive
Can someone please help me

Welcome to Apple Support Communities
Turn off your Mac by holding down the Power button. Then, turn it on and hold the Option (Alt) key until you see all bootable devices in the screen, so choose your Windows 8 disc and follow the steps to install Windows 8.1 > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf

Problems with Bootcamp Assistant: no bootable device -- insert boot disk and press any key

Hello Guys,
I got a problem setting up Windows 7 on my recently bought 13" MacBook Pro (2,3Ghz Core i5).
I used the bootcamp assistent to create a partition of 50GB on my Mac, everything is fine until now. I insert the Windows 7 disk and follow the instructions. But when I restart in spite of starting the installation of Windows 7, a black screen appears with a note saying "no bootable device -- insert boot disk and press any key". To exit this screen I then have to restart my Computer again, holding down the alt-key. In the following window I can just chose my Mac-Harddrive to boot from, the partition is not shown.
I used the software actualization tool to update to version 10.6.7 which is the most recent one i think.
The Windows 7 CD I use is actually a burned one. My University is a member of the msdn academic alliance and therefore offers me to download microsoft software for my work. I stress out that this is absolutly legal, I will only be allowed to use the software unitl I finished my studyings.
So as I said, I downloaded the Version of Windows 7 Professional with Service Pack 1 (x64) on my computer and then burned on a DVD. I want to add, that the file I downloaded turned out to be an iso file. At first, I just burned this file on a DVD but since it turned out that i got the above mentioned message, I burned a second DVD with the actual files of the iso (with foldernames like autorun.inf, boot, bootmgr, bootmgr.efi, efi, setup.exe, sources support, and upgrade)
I dont know if these details are of any relevance, but i guess it may be useful since I believe that the burning thing could cause the problems.
I have already browsed the Forum for quite some time now, but I didnt find a case with the exact same problem that I have, so I decided to rather ask you for help now instead of killing my brain like I did before (and I dont really have a clue neither of Macbooks nor of Windows-Computers, its always try and error for me)
I hope somebody can come up with some helpful ideas or a solution.
If you need further details on my system or anything, please feel free to ask
Thank you very much,
David

The Windows 7 CD I use is actually a burned one. My University is a member of the msdn academic alliance and therefore offers me to download microsoft software for my work. I stress out that this is absolutly legal, I will only be allowed to use the software unitl I finished my studyings.
Apple Disk Utility won't do a proper job and won't work (and it varies, some can start the install but fails later) Has to be burned at 2X Reduced Burn Speed
Also check the support articles for bootcamp
Apple Boot Camp Support

Help with "No bootable Device -- Insert boot disk and press any key" problem

Alright, I am on an Early 2011 17inch macbook pro. I have removed the superdrive to install a secondary disk drive for mass storage, then replaced the original one with an SSD blah blah blah. I do everything from the books, run bootcamp, make my USB windows 7 bootable in Bootcamp, go through everything and allocate 65gb towards windows. I have tried 4 different USB sticks and 3 different ISOs. Every time I try it, I get the same "No bootable device -- insert boot disk and press any key". I then have to hold down the power button, then restart, hold down option/alt key, and boot regularly into mac. I also read that holding option/alt whilst starting the macbook pro will show the windows USB stick, well it never appears. I dont know what I need to do, what I am doing wrong, but nothing is working. I guess the last thing I have to try is buying a superdrive and burning ISO to disc then try that. But I dont want to go out and spend more money. Other people have gotten it to work just fine from USB, I dont know what I must do or what I am doing wrong...
Open to suggestions and in desperate need of help. Anything is appreciated.
Thanks!

Don't bump
get a new usb2 only flash drive and try the solution posted by kunu here and report back
https://discussions.apple.com/thread/5105056?tstart=0
How to install Bootcamp on a 2009 Macbook Pro that does not have a disc drive

Bootcamp - No bootable device -- insert boot disk and press any key help plz

Hello there!
I recently upgraded my imac mid 2010 system with a SSD hard-drive. The old "main" drive went to the place of super-drive and after reinstalling OS X into the new drive and wiping the old drive a very interesting problem happened. I started trying to install windows 7 via bootcamp. I did everything what the bootcamp assistant says and after the imac restarts itself it just says No bootable device -- insert boot disk and press any key. Firstly I thought that maybe something is wrong with the installation disk (i have an external super-drive connected to the imac). After restarting the imac once again i held down the option button and arrived to the screen, where it shows the avlaible boot options (different disks). Now, what I saw, was funny. The bootcamp assistant had'nt created the bootcamp drive at all. Atleast it did not show it. After doing this two-three times the result was the same. My next idea was that maybe, there is an issue with the concrete SSD model I am using. So I went back to OS X and opened the bootcamp assistant and restored the state of the OS X SSD drive. Next I did an bootcamp partition onto the old drive I have installed. But the result is still the same. Now my head is empty of ideas.
Has anybody had a similar problem and can you please give me tutorial what I did wrong or what to try next?
Thanks.
Indrek.

Hi Michael!
Yep, I did get this running. Not in a normal way (meaning the easy way). What I did, is that I just created the BOOTCAMP partition in OS X. Just let it format and create the partition where you would install BOOTCAMP.
After that I discovered that via a ISO program (WinClone) you can directly restore a previously created OS X boot image to your current computer. So, I installed a blank Windows 7 to my macbook pro, didint install any drivers and just let it work up then. Then I went back to os X (in macbook pro) and made a bootimage for the BOOTCAMP partition. After that I saved it to my external harddrive and wired it to my iMac. In iMac I just downloaded the same boot-image program and restored the bootimage that I made in Macbook Pro to iMac. After that I made an restart and the bootcamp section with windows worked well with my iMac. Install the bootcamp soft and you can do everything and everything works. FYI, you get the windows working via those steps, BUT if you either delete or do anything to make your bootcamp partition unworkable then you will have to repeat those steps again. But it´s fast non-the-less, so it shouldn´t be a problem for you.
If you didin´t understand anything or something doesen´t add up, send me a letter or a notification.
Hope this helps.
Indrek.

Can't install Windows "No bootable device -- insert boot disk and press any key"

I'm running OSX 10.9.3 on my Macbook Pro 13-inch, Early 2011 and trying to install Windows 7 via Boot Camp Assistant and I'm using a flash drive loaded with bootable copy of Windows 7 Ultimate (legal, if that makes any difference).
Here's what I've been doing:
1. Plug in my flash drive, then on Boot Camp Assistant, click "Install Windows 7 or later version"
2. Set my Windows partition to 45GB and continue... so far so good...
Then the problem:
3. My computer restarts, goes to a black screen with the message "No bootable device -- insert boot disk and press any key"
The flash drive is still plugged in but is it not being recognized or something? Nothing happens when I press any keys.
I can use OSX just fine by holding down "Alt/Option" on restart, but in my case what can I do to continue further with the Windows install? It's basically an empty partition as of now. Any help appreciated!

Ive been having this problem and have been trying to figure out how to fix it for almost a week now. I have a 2011 17" MBP with the superdrive removed. Ive tried many different methods and many different methods to no avail. If anyone can help, please do!
xxzy, have you tried the KUNU method?
you can find it here:
Bootcamp without Optical disc drive
Scroll down to Kunu's post about his solution and see if it works for you.

Bootcamp Win 7 No bootable device -- Insert boot disk and press any key.

Hello everybody, I bought a windows 7 to install with bootcamp in my MBP retina, it came buy post, a windows 7 ultimate, OEM, and for my surprise it came with a DELL computer reinstallation CD, well, I search the Internet and some guys were receiving the same CD, and the web sites were saying that it works perfectly. So, I started to install it with boot camp.
I format my USB 16 gig from scandisk for (DOS FAT) in utility's on my mac, and I went to BOOT CAMP to install the windows. As I have a superdrive and the CD from win 7, I didnt select the option of creating a image of windows 7 (the first option) and I just select the other two. So the bootcamp asked me to connect my USB stick for downloading the windows drivers, and after downloading he opened the partition screen, I choose 30 gig for my windows partition and pressed continue, after that the boot camp asked me if I have a windows installing cd, and I clicked yes, Next window, " If you have an installation CD the boot camp will delete the boot from your USB stick, press continue, and I did. After that my mac reboot, and now I have the message " No bootable device -- Insert boot disk and press any key"
It doesnt boot with the USB stick.
It doesnt boot with my cd
ALT CMD doesnt work.
No MAC no Windows? Sheeee
Please help me if you can.
I have done a backup before.

You should take your Boot Camp discussion to the Boot Camp forum, https://discussions.apple.com/community/windows_software/boot_camp, where the "no bootable device" issue has been asked and answered many times.

No bootable device -- insert boot disk and press any disk

Similar Messages

Maybe you are looking for