No bootable disk insert boot disc
My hardisk had some issues so got a replacement hardisk from HP. i installed the new hardisk sucessfully. however when i start my laptop it shows No bootable disk insert boot disc.
i ran a harddrive self test, it was sucessful. i tried starting with the recivery disc 1, no luck either.
how to fix the error message?
Ramki wrote:
My hardisk had some issues so got a replacement hardisk from HP. i installed the new hardisk sucessfully. however when i start my laptop it shows No bootable disk insert boot disc.
i ran a harddrive self test, it was sucessful. i tried starting with the recivery disc 1, no luck either.
how to fix the error message?
Hi,
The new hard drive you have got is completely empty!! You have to restore the laptop to the factory settings with the recovery disks. Go to the BIOS and change the boot order to CD/DVD Rom (press esc at startup and then F10) and save the changes (reboot). After that insert the disk no.1 to the optical drive and reboot again (press ctrl+alt+delete). If you have the right recovery disks, it should boot up and start the recovery...
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*
Similar Messages
-
Get "no bootable device- insert boot disc and hit any key" error
Hp G72 Laptop, Windows 7 64 bit,
"no bootable device-insert boot disc and hit any key" (I have no boot disc.)
I was in the process of replacing the hard drive and the computer was starting the final phase after copying all files. When it restarted the first time, I got the message. I was getting this message randomly prior to replacing the hard drive and if I turned it off for 2 or 3 hours and turned back on I would not get the message. The reason for replacing the hard drive was a "Smart Disc " imminent failure error message.Yes and yes. The final recovery disc had completed and it was moving to the next phase. It said the computer would restart several times during this phase and when it went to the first restart, the error message came up and I could proceed no further. I ctrl/alt/del and restarted, pressed escape to get the start-up menu but was lost at all the options. The information screen looked like the old hard drive info.
-
No bootable device -- insert boot disc and press any key
Hello, I'm trying to install Windows 7 on BootCamp. I have iMac 2010. My CD-ROM is broken, i can't put CD into it. So, i use external CD-ROM. I burned DVD with windows 7 ISO file, started BootCamp Assistant, My computer restarted and then i have black screen with "No bootable device -- insert boot disc and press any key
So i can't continue installing Windows. On Mac os DVD is visible and everything is OK, but when restarting - i cant boot from it. How to install it?
Thank you.hrsrt wrote:
I burned DVD with windows 7 ISO file
Just burning a ISO onto a DVD wont make the DVD bootable.
Look here: http://support.microsoft.com/kb/977640
Lupunus -
Mac Mini - "No bootable device - insert boot disk and press any key"
When trying to install windows 8.1 from dvd on late 2012 Mac mini.
When the machine reboots after creating the ms-dos partition. I receive the foolwing error
No bootable device -- insert boot disk and press any key
The only drive I have connected is the Superdrive
Can someone please help meWelcome to Apple Support Communities
Turn off your Mac by holding down the Power button. Then, turn it on and hold the Option (Alt) key until you see all bootable devices in the screen, so choose your Windows 8 disc and follow the steps to install Windows 8.1 > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf -
Help with "No bootable Device -- Insert boot disk and press any key" problem
Alright, I am on an Early 2011 17inch macbook pro. I have removed the superdrive to install a secondary disk drive for mass storage, then replaced the original one with an SSD blah blah blah. I do everything from the books, run bootcamp, make my USB windows 7 bootable in Bootcamp, go through everything and allocate 65gb towards windows. I have tried 4 different USB sticks and 3 different ISOs. Every time I try it, I get the same "No bootable device -- insert boot disk and press any key". I then have to hold down the power button, then restart, hold down option/alt key, and boot regularly into mac. I also read that holding option/alt whilst starting the macbook pro will show the windows USB stick, well it never appears. I dont know what I need to do, what I am doing wrong, but nothing is working. I guess the last thing I have to try is buying a superdrive and burning ISO to disc then try that. But I dont want to go out and spend more money. Other people have gotten it to work just fine from USB, I dont know what I must do or what I am doing wrong...
Open to suggestions and in desperate need of help. Anything is appreciated.
Thanks!Don't bump
get a new usb2 only flash drive and try the solution posted by kunu here and report back
https://discussions.apple.com/thread/5105056?tstart=0
How to install Bootcamp on a 2009 Macbook Pro that does not have a disc drive -
Can't install Windows "No bootable device -- insert boot disk and press any key"
I'm running OSX 10.9.3 on my Macbook Pro 13-inch, Early 2011 and trying to install Windows 7 via Boot Camp Assistant and I'm using a flash drive loaded with bootable copy of Windows 7 Ultimate (legal, if that makes any difference).
Here's what I've been doing:
1. Plug in my flash drive, then on Boot Camp Assistant, click "Install Windows 7 or later version"
2. Set my Windows partition to 45GB and continue... so far so good...
Then the problem:
3. My computer restarts, goes to a black screen with the message "No bootable device -- insert boot disk and press any key"
The flash drive is still plugged in but is it not being recognized or something? Nothing happens when I press any keys.
I can use OSX just fine by holding down "Alt/Option" on restart, but in my case what can I do to continue further with the Windows install? It's basically an empty partition as of now. Any help appreciated!Ive been having this problem and have been trying to figure out how to fix it for almost a week now. I have a 2011 17" MBP with the superdrive removed. Ive tried many different methods and many different methods to no avail. If anyone can help, please do!
xxzy, have you tried the KUNU method?
you can find it here:
Bootcamp without Optical disc drive
Scroll down to Kunu's post about his solution and see if it works for you. -
"No bootable device --- insert boot disk and press any key" after setting up Bootcamp
Hi guys,
I am trying to install Windows 7 via Bootcamp but after setting up Bootcamp and restarting the computer I get the error message "No bootable device --- insert boot disk and press any key".
I use an iMac with a DIY Fusion Drive consisting of a 120 GB SSD and a 1 TB HDD.
Since Bootcamp can only be installed on the HDD I believe disk1 is the interesting one. Here is the output of sudo gpt -r -vv show disk1:
gpt show: disk1: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: disk1: Suspicious MBR at sector 0
gpt show: disk1: Pri GPT at sector 1
gpt show: disk1: Sec GPT at sector 1953525167
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 1709658208 2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
1710067848 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1711337384 88
1711337472 242186240 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1953523712 1423
1953525135 32 Sec GPT table
1953525167 1 Sec GPT header
And the output of sudo fdisk /dev/disk1:
Disk: /dev/disk1
geometry: 121601/255/63 [1953525168 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 0 0 2 - 25 127 14 [ 1 - 409639] <Unknown ID>
2: AF 25 127 15 - 1023 254 63 [ 409640 - 1709658208] HFS+
*3: 07 1023 254 63 - 1023 254 63 [1711337472 - 242186240] HPFS/QNX/AUX
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
Here is also the list of my disks:
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *120.0 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 119.7 GB disk0s2
3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage 875.3 GB disk1s2
3: Apple_Boot Recovery HD 650.0 MB disk1s3
4: Microsoft Basic Data BOOTCAMP 124.0 GB disk1s4
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS FusionDrive *975.5 GB disk2
Logical Volume on disk0s2, disk1s2
FFA13FBC-2001-40B7-8BBB-BE6EECF8AC11
Unencrypted Fusion Drive
/dev/disk3
#: TYPE NAME SIZE IDENTIFIER
0: GRMCPRXFRER_DE_DVD *3.2 GB disk3
I have gdisk installed and am ready to mess around. Any help would be greatly appreciated!So, when I started my iMac yesterday morning it couldn't boot into OS X anymore either. Several hours of restoring later I am back to square one. I tried installing Windows 7 via Bootcamp again but got the same error message. This time I noticed though that Bootcamp asked me to remove the bootable option from the USB drive with the support drivers in order to install from DVD. Does that ring any bells? I am building another USB drive right now, hoping it would ask me again but this I will decline and try to boot from it.
When you restored, was a Time Machine restore used? TM does not backup Bootcamp and does an erase of the partition. It may also erase the entire disk (including the Fusion drive) if the specific backup of the volume layout of the disks indicates a pre-Bootcamp layout.
My MacBook Pro is a 2009 model and also once had a built-in optical drive. I have no idea why it would work on there but not on the iMac.
You also wrote
When I plug the external DVD drive in, the boot manager recognizes a "Windows" disc and an "EFI Boot" disc. If I select the "Windows" disc I get a black screen with a blinking dash.
The blinking dash indicates that it is working, but does not have the requisite drivers to enable the GPU/Mouse/Keyboard on the media being used.
In the MBP case, did you have two drives installed in the MBP, a Fusion configuration, and then were able to successfully install Bootcamp?
For example on a Mac mini I have a DIY Fusion drive, but the sequence was done differently. Bootcamp was installed using a USB stick+Windows 7 ISO.
1. The two disks are not in a CoreStorage set up initially.
2. The second disk is partitioned (64Gb) and a Bootcamp W7 install completed via USB (this is different HW as compared to IMac, because it has no Optical drive).
3. After the HDD is partitioned, the first partition and the SSD are then used to create a CoreStorage volume.
4. Here is the working version and disk layout. (I plan to erase both disks, put W7 on a partition on the SSD, and make the non-Bootcamp+entire HDD in a CoreStorage volume).
diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group A8C00490-0E14-401F-AB69-59F37724E8C4
=========================================================
Name: Fusion
Status: Online
Size: 1190201270272 B (1.2 TB)
Free Space: 0 B (0 B)
|
+-< Physical Volume 4772013B-5520-4801-9BE5-BCAEF4AEDAB3
| ----------------------------------------------------
| Index: 0
| Disk: disk0s2
| Status: Online
| Size: 255716540416 B (255.7 GB)
|
+-< Physical Volume A679A101-3C78-4A59-B5EE-A4339210CFAD
| ----------------------------------------------------
| Index: 1
| Disk: disk1s2
| Status: Online
| Size: 934484729856 B (934.5 GB)
|
+-> Logical Volume Family 5EF5C7CA-0B9C-4169-82A1-41C84F206672
Encryption Status: Unlocked
Encryption Type: None
Conversion Status: NoConversion
Conversion Direction: -none-
Has Encrypted Extents: No
Fully Secure: No
Passphrase Required: No
|
+-> Logical Volume 1512657C-ED13-4B31-82C6-7AECBBCA7F98
Disk: disk2
Status: Online
Size (Total): 1185508581376 B (1.2 TB)
Conversion Progress: -none-
Revertible: No
LV Name: Fusion HD
Volume Name: Fusion HD
Content Hint: Apple_HFS
diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *256.1 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 255.7 GB disk0s2
3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage 934.5 GB disk1s2
3: Apple_Boot Boot OS X 650.0 MB disk1s3
4: Microsoft Basic Data BOOTCAMP 64.9 GB disk1s4
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Fusion HD *1.2 TB disk2 -
I'm trying to install Windows 7 onto my MacBook Pro Mid-2010 (MacBookPro6,2) from a USB drive, since my Super Drive no longer will burn DVDs or CDs. I did the XCODE trick to allow me to make the bootable USB. But when it reboots after partitioning I get this, "No bootable device -- Insert boot disk and press any key" message. When I press a key after reinserting the USB it still won't boot after pressing a key. I unplugged anything connected to it and it still doesn't work. Is there any way I can get it to be recongized or do I just need to get an external disc drive and burn a disc that way?
If your computer came with an inetrnal optical drive, you must use that to install Windows.
-
Recovery fail - "No bootable device -- insert boot disk and press any key"
Hello,
I have a problem with Recovery. I don't have recovery dvd/cd so I decided to use recovery partition. After system reboot I press F11 and click on recovery system. After 100% of progress, recovery tells me something like 'now your system will reboot press continue'. And now. After system reboot I see:
No bootable device -- insert boot disk and press any key
I have totally no idea what to do. I read few posts on this forum but I have no Windows 7 CD/DVD and I have no one who can borrow me to install it. I really need my computer back in few hours to work.
Looking for help from You.
My computer: HP Pavilion dv7-6b40ew, Windows 7 Home PremiumHi,
Assuming this is just a problem with the recovery media, here's an alternative option you could try.
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
An example of a COA Label can be seen Here.
You can create an installation disc yourself using another PC - just download the correct Disc Image ( this must be the exact same version that originally came with your notebook ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers and software you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
No Bootable Device - Insert Boot Disk Error...
Ok so today I installed Windows 7 Ultimate 64-Bit on my 750GB Toshiba HDD in my Optibay and was installed successfully, installed all the Drivers from Windows Support flash drive and when I try to reboot into Windows 7 I get the "No Bootable Device - Insert Boot Disk Error" everytime!! lol What the heck is going on here??
Specs:lennarts wrote:
So, I encountered the same problem...
When I click the icon in bootcamp to install windows, after a bit of activity the Windows installation disc was spit put, the screen goes black and the error "No Bootable Device Insert Book Disk Press Any Key to Continue" appears on the screen. And nothing else but using the OSX installation disc helps.
I realised that the windows installation disc did not even spin up.
So what I did... I went back to OSX, reinserted windows installation disc, went to system preferences, selected the windows cd as a start up disc and locked it against the changes.
After that I went back to bootcamp and clicked gain to install windows. Everything worked fine now.
I just tried this and it didn't work for me. I keep getting a black screen with a cursor flashing in the upper left hand corner. -
Monitor reads "no bootable device--insert boot disk and press any key
Monitor reads "no bootable device--insert boot disk and press any key. I inserted the boot disk and nothing happened. What do I do?
Hi s,
This happens when you're trying to boot normally?
First, shut down the MBP; hold down the power button for 5-10 seconds if necessary.
Next (this assumes the install disc is still in the optical drive), press the power button and hold down the c key and keep holding it until you see “Preparing Installation" > at first screen select the language and click Continue > click on the Utilities Menu in the menu bar > select Startup Disk > choose the OS X installed on your HD. Follow the on screen prompts to quit the utility and restart. -
Error message on screen: No bootable device -- insert boot disk and press any key comes on
Error message comes on screen: No bootable device -- insert boot disk and press any key. What do I do?
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
If the above is not possible or failes, then replace your hard drive. -
HP Pavilion dv4 1125nr will not boot up it says "No bootable device insert boot disk
When I power on my laptop it keeps saying "No bootable device, insert boot disk & press any key" but I don't have a disk. what can I do to get my laptop working again?
Hi
When your system starts press F2 at BIOS prompt and do a hard drive Diagnostics test to see if your hard drive has failed , You may get a failed short DST test which will Indicate hard drive failure . Is your machine under the 12 month warranty ??
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem**** -
No Bootable device insert boot disk on iMac Wireless
Hi,
We just recently bought an iMac with Intel just a month ago. Earlier today my computer completely froze so I restarted it. When I turned it on. I received the "No Bootable device--insert boot disk and press any key". Well with the new computers, we did not receive a disk and there is no disk drive in the machine. I have an external disk drive and I unfortunately do not have an external hard drive either. I have most of the files saved on a separate computer.
I looked online and saw that when you restart the computer you can hold the Option key and it will bring up all the systems. It does work and it gives me two options. One is the windows and the other one is a hard drive but its not the OSX hard drive. I've tried both and they both do not work and send me back to the message "No Bootable device--insert boot disk and press any key". We just bought it less than a month ago and I also have a 3 year support and coverage on it that covers problems if need be but I would like to try and fix it myself.
If anyone has any other ideas or tips please let me know.OK. That's not the best news. I can take you through some Terminal commands to attempt to mount the volume if that's possible. Or, you can just erase the volume and reinstall OS X. I suppose your choice here depends on whether you have backups of your files.
Install or Reinstall Mavericks, Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
No bootable device -- insert boot disk and press any disk
Pleeeeessssssseeeeeee help. I was trying to setup bootcamp but when it came to instaling windows it came up with a black screen and then after 5 or so minutes it powered down. Then when I turned it on from the power button at the back of imac 21.5 inch it took longer than usaul on the white startup screen displaying no apple symbol. Then the screen went black and displayed the words "No bootable device -- insert boot disk and press any key" I have a wireless key board and doesn't conect to the mac until after startup so I cannot hold down the option key (ALT). I have ordered a wired keyboard but will take quite long to get here. Is there a way to fix it without a keyboard or mouse bearing inmind it is an all in one.
Thanks
george292See this discussion for a possible solution in case Allan's suggestion is not the problem. Also look to the right side of the page for other possible discussions with solutions.
Maybe you are looking for
-
Client Photo Management Solution?
I am searching for a software solution that will allow me to store 5GB-7GB of photos in the cloud so my client can view and download images from his photo gallery. If possible, having the option to download a couple different resolutions would be ide
-
Hello.. Is there any way to change the output from Mavericks Dictation feature? I know there are commands like "no-caps-on", but I want to be able to write variable names in different languages like camelCase, hyphen-separated, under_score, dot.notat
-
Greenscreen issue - eporting as an image sequence?
Hi folks! I have this greenscreen shot whith VERY bad lighting. So in order to get decent keying, I decided to export my footage as an image sequence after using the primatte keyer for further correction in photoshop. (I have also tried the demo of D
-
I can't download the latest security update to my iMac with Yosemite 10.10.1
I can't download the latest security update to my iMac with Yosemite 10.10.1
-
The 2GB hard drive on my iMac failed and has just been replaced under warranty. When I got it back I restored my Time Capsule and started back ups of the iMac and the MacBook Pro. Now 2 days later it is telling me that Time Machine couldnt complete