"No bootable disk" when installing Windows 7 on Macbook Pro (HDD caddy)

Here's the deal.
I have a 2011 Macbook Pro (8,1) that I bought a HDD caddy for.  It's beautiful.
I replaced the superdrive with a 1tb hard drive and it's wonderful.  I want to install Windows 7 via bootcamp on it.  I go through the steps (create install usb, download extra files, partition the drive) and once it restarts I get the following error:
I press keys, reinsert the usb stick repeatably, and finally hold down the power button to restart.  After holding down option to bring up the boot menu, this is what I get:
Where did my other disks go?!  I boot normally and check Disk Utility and, look at that, there they all are!
I've gone through variations of this for 3 days now.  Please help!

I recently ran into a very similar issue. Windows, or at least Boot Camp, will not boot into an HDD that is installed in the optical drive bay. I do not know why this is, or if there is a way to fix it; all I know is that as soon as I moved my HDD back to the HDD bay, Windows started booting again.
Boot camp has many issues with MacBooks whose optical drives have been replaced, which are well-documented on the web. This article (and its comments) describe many of them, and the workarounds that people have found for them. That said, I think that Boot Camp has improved with Mountain Lion (or possibly with the continued proliferation of optical drive-less machines from Apple), because I was able to boot the Windows installer just fine from the optical drive that I had removed and placed in an external USB enclosure. (Not that it did me any good - I received the dreaded error 0x8030024 when I tried to actually install Windows.)
What worked for me was to install Boot Camp before removing my optical drive, use WinClone to make a copy of that installation, and then clone the image back to the drive once I'd gotten my drives in place.
So, in summary:
Try putting Boot Camp on the drive that's in your HDD bay.
The article I linked describes many of the issues you might run into and provides workarounds for them.
Worst case, you may have to reinstall the optical drive in order to install boot camp, then use WinClone to move the installation to any drive you wish. (Hang onto this image for all future Boot Camp installations.)

Similar Messages

  • Installing Windows on Macbook Pro, NO BOOTCAMP

    I have a 15 inch core 2 duo Macbook Pro and I went to restore my computer to tiger once again and when I did I relised that the disk is too scratched up, I can only get about 90 percent of the minimal installation done.
    After a while of trying diffrent things i got fet up and partitioned my hard drive to Master boot record and poped in my Win7 install disk, I installed Windows 7 perfectly with no problems but now when I go to boot it up all I get is a grey screen and after a while a folder icon pops up with a question mark on it.
    How can I fix this without using another mac or bootcamp, because I DON'T have access to one and i DON'T have access to another mac cd, so don't give me that option, lol.. The only thing I have access to is another windows 7 computer.
    Please help, I thought mac was suppose to be one of the top brand computers. especially with the price of them, but so far I've had more trouble with this mac than what I did with my HP, I had my HP 3 years now and my macbook not even a year.
    Thanks,

    Boot Using OPTION key:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the
          "OPTION" key.
      3. Release the key when the boot manager appears.
      4. Select the desired disk icon from which you want to boot.
      5. Click on the arrow button below the icon.
    Select the Windows disk icon and click on the arrow button.
    Where did you get the Windows installer from? Your HP? That's an OEM disc that cannot be used except on your HP. You need a retail Windows disc if you want to boot the Mac exclusively with Windows. Of course you will not have any of the hardware drivers for Windows for use on the Mac hardware.
    I don't understand your complaints about a computer you don't seem to know how to use, your installer discs are all scratched up and no longer usable, but you have had lots of trouble with it. And, all your doing is trying to use it as a Windows computer. Defies logic.

  • Installing windows on MacBook Pro

    I am looking into installing Windows on my Pro because I need Visual Studio for programming and just need some questions answered.
    1. Is there a Mac native alternative to Visual Studio? I am using it for a Visual basic class I am taking and we are creating windows applications.
    2. Can I buy an external hard drive to run Windows OS from? I opted for the ~256gb SSD MacBook Pro and am not wanting to waste storage space on Windows OS, especially since I do not foresee using it after this class.
    3. If I cannot run Windows from an external hard drive:  How easy is Windows installation, as well as how easy is it to remove Windows OS when I am finished using Visual Studio? Are there risks to my MacBook accompanied with Windows installation?

    1, No
    2, No, Microsoft doesn't allow that
    3, Read http://manuals.info.apple.com/MANUALS/1000/MA1583/en_US/boot_camp_install-setup_ 10.7.pdf

  • No bootable disk after installing Windows

    I tried to install Windows 7 with Boot Camp on my Intel Single Core Mac Mini, and after having an error message I couldn't boot anymore. All I was getting was a black screen with the cursor flashing. I took the opportunity to upgrade to a bigger hard drive. I got the older hard drive out, deleted the windows partition, and cloned the original mac partition onto the new hard drive. All I get now is instead a "no bootable disk - insert bootable disk and press any key" error message. I have tried to boot from the original Install DVD, but no key combination works on start up. I tried C, Option key, Command-Option-Shift-Del, but it still goes to the black screen. The mouse is still working, as I can get the DVD out if I click the left button on start up but no keyboard seems to work (I tried to original Apple ones). I have got the new hard drive out, put it in an enclosure, formatted it with my laptop, and tried to install OSX from the disk but still can't boot from disk and still get error message. Any help?

    While we all have MacBooks in this forum not all of us use BootCamp. There's a BootCamp Support Community where everybody uses BootCamp. You should also post this question there to increase your chances of getting an answer.
    https://discussions.apple.com/community/windows_software/boot_camp

  • How to make a USB bootable disk to boot up my macbook pro.

    Macbook Pro has just fallen and HDD will not boot up.
    Start up screen keep bringing up a folder with a question mark in it, and the hard drive keeps making a noise that doesnt sound good.
    Need to know how to make a USB bootable disk in order to boot up my macbook and install my new SSD.
    Or any other information that could help me.
    I was running OS X Yosemite, so would prefer to have this reinstalled onto the boot up disk.
    PLEASE HELP !!!!

    Install or Reinstall Lion from Scratch
    If possible backup your files to an external drive or second internal drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
    Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Install button.

  • Installing windows on macbook pro without bootcamp. Will this allow for switchable graphics?

    Hi everyone, I was thinking of buying a new Macbook Pro Retina 15 Inch with the discrete nvidia graphics card inbuilt with it.
    I love windows and I am planning on running windows 7/8 on the macbook pro as my primary OS (because of advantages of gaming and being familarized with windows os), however I have heard the issue of running windows on bootcamp severally drains battery life as apple does not allow you to switch the nvidia graphics to the integrated graphics. Is this true? I have heard that running windows 7/8 on bootcamp allows for only around 3:30 hours of battery life, whilst OSX allows for 8+ since it uses the integrated graphics primarily when not running GPU demanding applications.
    I am wondering if you can install windows 7 without bootcamp which will wipe apple OS from the laptop completely. Will this allow for the laptop to do switable graphics without problems allowing the laptop to save much needed battery life?
    Thanks in advance.
    Michael

      Sorry it seems to have taken so long for you to get an answer on this question!
      Your last post was mostly right... It IS a bad idea to go that route!
      While it's technically POSSIBLE to get Windows in place without OSX, it's a MAJOR technical hassle and you need to jump through several hoops to get to that point.
      In addition to the hassle required, having an OSX partition can be incredibly useful at times - I've had my Windows system break several times in the past where the automated (and even manual) startup-repair process failed to get Windows booting again, but a short boot into OSX later, I have the problem resolved (via OSX) and am able to get back into Windows.
      Finally, you need to be aware that the graphics card situation isn't because of the presence of OSX. Just because you get rid of MacOS doesn't mean you suddenly will be able to use either graphics card! The limitation comes into play with the hardware drivers necessary to get all your hardware working in Windows - they just don't have the facility to switch graphics cards built into them.
      I'm afraid you're stuck with the NVidia card when using Windows, one way or another!
      Bootcamp is a prerequisite BTW. Without it you won't be able to get Windows installed at all (at least not without MAJOR stumbling block, again!), and again, the graphics card limitation isn't due to OSX or Bootcamp.
      Also, battery life... Yes. You'll have significantly less in Windows, and this isn't entirely because of the graphics card situation either. MacOS is just built so well, with the limited hardware used by Apple in mind, that power-management when using OSX os significantly better! The legendary battery life of Apple systems is actually primarily due to the operating system, not the batteries themselves!
      As a helpful indication: On my 2009 17" MBP I get about 7 hours on the integrated chip in OSX (8 is pusing it, but is possible sometimes); about 5 hours in OSX when using the NVidia; and about 3 and a half when I'm in Windows.
      Hope this all helps you. If you have any further questions feel free!
      Apologies for the scattered approach to answering your posts - it's LATE where I am and I"m kinda rushing through things... :-)

  • How to install windows on macbook pro me294 using downloaded drivers?

    Recently I bought a MBP and I'am going to install windows on it because of my job. I have a problem with bootcamp assistant: I have downloaded the bootcamp drivers but when I am creating the setup disk it automatically chooses to download the drivers again! What should I do?

    i have done this steps but when i boot the usb key it freezes in the first screen ( selecting languages ) ! but i believe it doesn't freezes, it is because it doesn't recognize my hardware. when i was installing win8 there were no problems like this!

  • Not possible to install windows on macbook pro

    I have one Macbook pro 2011 late version . My boot camp assistant not showing option ” Create a Windows 7 install disk ” only showing download the latest windows support software from apple and remove windows partition. Please help me

    If you have a built-in Optical drive, you will not get an option to create a USB.

  • Java error when installing Groupwise on MacBook Pro

    I am trying to install Groupwise for Mac, but continue to receive an error during the installation process that indicates "Uncaught exception in main method: java.lang.unsatisfiedLinkerror:..." Can anyone helpe me? I'd like to install this software.
    I'm using a MacBook Pro. Any help would be appreciated.
    Thank you,
    Vlad

    This usually indicates a messed-up java installation or a missing JNI system library. Can you post the entire stack trace? That would help me to narrow down the problem.
    The stack trace looks something like this:
    Exception in thread "main" java.lang.UnsatisfiedLinkError: createJNI
    at com.sun.star.lib.connections.pipe.PipeConnection.createJNI(Native Method)
    at com.sun.star.lib.connections.pipe.PipeConnection.<init>(PipeConnection.java:137 )
    at com.sun.star.lib.connections.pipe.pipeConnector.connect(pipeConnector.java:145)
    at com.sun.star.comp.connections.Connector.connect(Connector.java:146)
    at com.sun.star.comp.urlresolver.UrlResolver$_UrlResolver.resolve(UrlResolver.java :133)
    at com.sun.star.comp.helper.Bootstrap.bootstrap(Bootstrap.java:292)

  • Can I use my MacMini Snow Leopard disks when installing Windows on my iMac?

    I want to install Win 7 on my iMac this weekend, but I forgot my Snow Leopard install disks at my parent's and probably won't be able to get them for a couple weeks. Those install disks were the full distribution, not the disks that came with my iMac (those disks have 10.5).
    I do, however, have a new MacMini that has SL install disks. Would those be good enough? Or could I use the older 10.5 install disks that came with the iMac (it's running 10.6.2 now) and then upgrade later with the Boot Camp 3.1 exe?
    Thanks!

    I guess that is progress.
    Can you get your DVD sent? or email the 950MB you need or postal ship on USB to get 3.0?
    A lot of times drivers for chip can be downloaded from vendor.
    With wireless, I think people have complained of problems even with Apple's drivers. I'm sure you don't want to but maybe a cheap wired mouse/kb for now?
    When I just installed BC 3.0 it downgraded my Realtek audio, not upgrade (removing old drivers to install new is what it erroneously said).
    When I bought 10.5.0 it had "2.0" but the same old BC 1.4 drivers. Then bought 10.5.6 a year later, had new drivers, not posted online, not via ASU or any update. I know people have said that new Macs have later 3.x drivers and I'm sure next summer would be better. Also, Windows 7 SP1 will be out next Aug/Sept also.

  • Can't Install windows on Macbook Pro Early 2011 with SSD upgrade

    Dear all,
        A few months ago I had an SSD upgrade and I purchased a Caddy and installed my old HDD on it, and I also changed my Battery because the old one only lasted for 15 inutes after 40 cycles :O
    Anyways when I insert a windows 7 or 8 x64 DVD in my USB Samsung DVD Drive, My mac book detects Windows (with the windows 7 DVD) and Detects Windows and EFI Boot (with Windows 8),  I have tried every option of those doesn't work.
    With EFI it just boots Mac
    With Windows it boots to a screen with one blinking cursor top left and then it ejects the DVD ROM and that it :s
    I do not know what is wrong :/
    P.S. when i installed the SSD I had windows on the old drive it didn't work after the upgrade (this is what made me link both incidents).

    I am willing to try this, but I was kinda trying to find a solution that doesn't need me to unscrew stuff ..etc

  • Hi, I would like to know if is it possible to install windows on mac pro , because I need to have some application like SQL server and visual studio, and they could not be install on mac

    hi, I would like to know if is it possible to install windows on macbook pro , because I need to have some application like SQL server and visual studio, and they could not be install on mac

    Windows on a Mac

  • The keyboard and trackpad on MacBook Air (13-inch, Mid 2013) computers may stop functioning at the Personalize step when installing Windows 7 64bit

    The keyboard and trackpad on MacBook Air (13-inch, Mid 2013) computers may stop functioning at the Personalize step when installing Windows 7 64bit.

    1. Reset PRAM.  http://support.apple.com/kb/PH4405
    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.

  • Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.)

    Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.). I made a clean installation because I needed to go from 32 bit to 64 bit.
    Or should I just update bootcamp in Lion? (cause when I search for "boot camp" in Windows 7 there's no result)

    Installation Guide
    Instructions for all features and settings.
    Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ Answers to commonly asked Windows 7 questions.
    Apple Boot Camp Support
    Lion's Boot Camp Assistant 4.x should have downloaded Apple drivers as part of also partitioning.
    You need Apple drivers. And you then need to add on your own audio driver.
    You can run Assistant at any time to download and save a set of drivers.

  • When I format hard disk while installing windows it shows an error?

    When I format hard disk while installing windows it shows an error and says that windows can't be installed to this hard disk, but I have installed windows before. How can I install windows?

    You are getting this message because you are trying to create an iCloud account on a PC by signing with your Apple ID.  You can only sign into an existing account on a PC.  You first have to create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.5) or higher.  After creating your account on one of these devices you will then be able to sign into the account using this ID on your PC.

Maybe you are looking for