No brighness option in windows 8

in my HP computer there is no option is available for brightness change.
i have tried auto brightness etc. but still my laptop's brightness not changing.

Hi,
What is your machine ? Normally you can use F2 and F3 to change screnn brightness. The option auto brightness may require a sensor and many laptops now don't have this sensor.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

TS3804 "io6" I am unable to save a photo from another app (for example FACEBOOK) to the Camera Roll. I press & hold the photo, the window indicates "Save Photo" comes up, I press that option & the window goes away but the photo is not in Camera Roll.

IPHONE 4 + "io6". I am unable to save a photo from another app (for example FACEBOOK) to the Camera Roll. I press & hold photo, window indicates "Save Photo" comes up, I press that option & the window goes away but the photo is not in Camera Roll. Please advice...

Steve750717 did yu notice that the post is 6 months old?

Data Execution Protection option in Windows 2003

Does anyone know if enabling the Data Execution Protection option in Windows 2003 will have any negative effect on a SAP system?

well it is as Eric already mentioned:
1st recommendation: Go for 64 Bit!
2nd recommendation:
decrease the user address space carefully if you have to.
start with /userva=2900, if the problem still happens change /userva step by step to lower values each time evaluating wether the new value has fixed the situation.
the problem with /userva is, that it shortens the virtual address space (addressable memory for normal applications). with /userva=2700 your application is able to address 2.7 GB of virtual memory, the remaining 1.3 GB can only be used in kernel mode (operating system, drivers etc). In this case (/userva=2700) your application (ABAP Report, other memory consuming programs) can only utilize 300 MB less memory compared to /userva not set.
Those ABAP reports currently utilizing 95 percent of the available address space will no longer run when /userva is set to 2700.
It is much less pain to run on 64 Bit OS - you don't have to play around with all these funny parameters.
peter

Windows of excel and word pop up on desktop.i have unchecked the option for windows on pop.

windows of excel and word pop up on desktop.i have unchecked the option for windows on pop.but still dey show up

Whaat version of Mac OS X?
When do the windows show up?

Activate 3Gb option in Windows Database Oracle 10g

Hi
We are facing ORA 4030 - Oracle Out of memory issues after upgrade to Oracle 10.2.0.4 (32 Bit Machine).
We want to activate the 3GB option in Windows by adding /3GB at the end of boot.ini file.
We will make sure to take the backup of boot.ini file.
But
One of the prerequisite is
An additional prerequisite for using 3GB of address space is a corresponding indicator in the header of the executable. You use this indicator to signal to NT that the application (ORACLE.EXE) can work with
3GB of address space. If this indicator is not set, this means that only 2GB is available to the application, even though you are using the 3GB option and the NT Enterprise Edition.
1. How can we put the corresponding indicator in the header of the executable?
2. And in which Executable?
Much appreciate the response..
Regards

Hello Rajesh,
you don't havt to changa any executable.
You just have to add the entries /PAE /3GB to your boot.ini.
The user account under which Oracle Database runs (SAPSERVICESID), must have the "Lock memory pages" Windows 2000 and Windows XP privilege.
USE_INDIRECT_DATA_BUFFERS=TRUE must be present in the initialization parameter file for the database instance that will use VLM support. If this parameter is not set, then Oracle Database 10g Release 1 (10.1) or later behaves in exactly the same way as previous releases.
Initialization parameters DB_BLOCK_BUFFERS and DB_BLOCK_SIZE must be set to values you have chosen for Oracle Database.
Dynamic SGA and multiple block size are not supported with VLM. When VLM is enabled, the following new buffer cache parameters are not supported:
   DB_CACHE_SIZE
   DB_2K_CACHE_SIZE
   DB_4K_CACHE_SIZE
   DB_8K_CACHE_SIZE
   DB_16K_CACHE_SIZE
   DB_32K_CACHE_SIZE
To select the block size for the instance, use the initialization parameter DB_BLOCK_SIZE. The buffer cache size is set by the initialization parameter DB_BLOCK_BUFFERS.
Registry parameter AWE_WINDOW_MEMORY must be created and set in the appropriate key for your Oracle home. This parameter is specified in bytes and has a default value of 1 GB. AWE_WINDOW_MEMORY tells Oracle Database how much of its 3 GB address space to reserve for mapping in database buffers.
This memory comes from the 3 GB virtual address space in Oracle Database, so its value must be less than 3 GB. Setting this parameter to a large value has the effect of using more of the address space for buffers and using less AWE memory for buffers. However, since accessing AWE buffers is somewhat slower than accessing virtual address space buffers, Oracle recommends that you tune these parameters to be as large as possible without adversely limiting database operations.
In general, the higher AWE_WINDOW_MEMORY is set, the fewer connections and memory allocations will be possible for Oracle Database. The lower AWE_WINDOW_MEMORY is set, the lower the performance.
Once this parameter is set, Oracle Database can be started and will function exactly the same as before except that more database buffers are available to the instance. In addition, disk I/O may be reduced because more Oracle Database data blocks can be cached in the System Global Area (SGA).
For more details please see ...
SAP Note 441663 - USING > 3 GB of memory for Oracle on WINDOWS platforms
or
http://download.oracle.com/docs/cd/B19306_01/win.102/b14304/architec.htm#i1005826
Regards
Sascha

Memory usage exceed -Xmx option in Windows 2000.

Hi ,
I run the java application with -Xms300M -Xmx600M option in Windows 2000.
When I start the application, it's virtual memory size is 300M.
(In Windows TaskManager choose the Processes Tab and select "Select Columns..." option in View menu. And check the "Virtual Memory Size".)
After several test I found that it's virtual memory size is bigger than 600M in Windows TaskManager.
It's virtual memory size is about 650M.
Why the application's memory usage is bigger than 600M despite of -Xmx600M?

The -Xms and -Xmx control the Java heap size only.
The stack does not go on the heap, and the VM will need some memory of its own as well.

I am trying to purchase Creative Suite CS6 Design Standard. I own a Max OSX. I live in Germany. When I try to order for Germany, it gives me only an option for Windows, not Mac. How can I order?

I am trying to purchase Creative Suite CS6 Design Standard. I own a Max OSX. I live in Germany. When I try to order for Germany, it gives me only an option for Windows, not Mac. How can I order?

In Germany no telephone number nor web chat is available. Searching on the Adobe site tells me that this forum is the only avialable means to ask consumer questions. I am giving up and ordering from elsewhere.

X-fi xtreme audio option on windows 7

%x-fi xtreme audio option on windows 7? hello all members and staff from soundblaster.
i come here to find help about a situation i have steped on and is making me some lack.
i am using windows 7 and downloaded the latest drivers from soudblaster for my x-fi xtreme audio (non pci-e) and i noticed that an option enabled on other operating sistems is no longer avaiable.
this option was called the 'what you hear' and basicaly it captured by hardware all my computer sounds and allowed me to record them with no problems. with windows 7 i am not having this option anymore.
this option was very usefull for me since i was operating a small radio online for events on a 3d virtual city and that way i was able to send music and my voice over a stream to all members on that virtual city with excelent quality.
at this time, without that option, i dont know how to set up a good quality and due this issue i wish to know if this functionality of the soudcard will be avaiable again with windows 7.
i had this feature either with windows XP or vista.
with no further subjets, my thanks in advance for any help provided.
Marco Matias

http://support.creative.com/kb/ShowA....aspx?sid=7490 and
http://support.creative.com/kb/showa...aspx?sid=55438 and this link is for win7 64 bit apps and drivers
http://support.creative.com/Downloads/welcome.aspx
on my taskbar under hidden icons is circle with blue dot click it and select creative console launcher that is where it is also you have to go to windows media center uner task click it and setup your speakers. I'm having scratchy sound issues watching video's ONLINE IF YOU INSTALLED from cd ifyou go to top of desktop with mouse pointer you should also find the CREATIVE CONSOLE LAUNCHER (THAT IS WHAT YOUR LOOKING FOR)

How to locate .exe file in pc harddisk programatically using labview same as search option in Windows.

Hi,
I want locate a file which is a third party exe file.
For this purpose i should know programatically how many drives are present on the PC Hard Disk.
I made a VI to fetch the information about how many drives or partitions are present on the harddisk.
I am able to find that information and are able to locate each & every folder available on each drive.
But i am not able to that function in LabvIEW which can solve my problem and search for that .exe file for its existance on the PC disk.
THe idea is same as the search files and folders option in windows.
Can anybody help me in this problem.
Samriddh Sarbalhi

Use the "recursive file list.vi" under the "file io->Advanced file options" pallete.
wire "*.exe" to locate all the vailable exe to the "pattern" control of this vi
Guru
Regards
Guru (CLA)

No library panel option under windows menu PC signed in to cloud

I have photoshop at home and work I want to use shape captured on my ipad noticed no library panel option under windows menu.
in general Cloud, Bridge andLlibraries confuse me obviously not the same but after viewing tutorials more confused.
Damian Burns smart and stupid at the same time!

Chris and Gener7here are my system details below
Adobe Photoshop Version: 2014.2.0 20140926.r.236 2014/09/26:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2491 MHz
Built-in memory: 8074 MB
Free memory: 5400 MB
Memory available to Photoshop: 7045 MB
Memory used by Photoshop: 60 %
3D Multitone Printing: Disabled.
Windows 2x UI: Disabled.
Highbeam: Disabled.
Image tile size: 128K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
thankyou for trying to help me
Damian Burns
Sent from my iPad

System Recovery Options in Windows 7 (MBP and Parallels)

I realize it is probably debatable (perhaps at best) if this belongs here but I have borked my Windows 7 installation on my MacBookPro running Snow Leopard and I now see this after opening Parallels and either starting or shutting down the virtual machine:
http://dl.dropbox.com/u/15285654/Screen%20shot%202011-11-25%20at%2011.13.16%20AM .png
I am trying to follow some system recovery recommendations and I can't quite figure out if I need to hold down "Fn + F8" upon a Restart of the Virtual Machine - or if I should put the install Disk in and then somehow /boot/ to the CD Rom or what:
http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options -in-Windows-7
If anyone has any advice I'd love to fix this problem without a full re-install of Win 7.
Thanks.

Thanks - but I can't seem to install it! Even in compatibility mode. I get an error box telling me to check nothing else is running (...), and a message saying it has encountered error code -6003.
Could this have something to do with me running Windows 7 x64?
Thank you...

When I click a stickies window, I get a notification window stating stickies quit unexpectedly-reopen option makes windows vanish

When I click a stickies window, I get a notification window stating stickies quit unexpectedly-reopen option makes windows vanish

Hi their firefox has updated to 4.0 [http://www.mozilla.com/en-US/firefox/features/ 4.0 Features] Please can you try the following for me
[[Firefox crashes]]

Do not find the option for windows when I press the the option key during restart, since I downloaded Lion

I still do not find any option for windows when I restart my mac when pressing the option key. It used to go to windows when I pressed the option key during a restart but since I have downloaded Lion, it always go to mac. I do not want to make a permanent switch. ANy suggestions on how to get back to using the option key?

You probably need to reinstall your Windows machine.
I'm not certain, but I have a feeling the install of Lion wipes it out, going by the number of threads started along similar lines since Lion's release.

I have a virus. My macbook open many tabs and impossible close. Also deselect option "relaunch window..." on general settings, but the problem keeps

Hi, I have a my macbook and my safari crash.
When I restart safari, after deselect the option "restore window..." the safari keeps open so many tabs. Many, many, many....and dont stop!!!!
Help!

Quit Safari.
Hold a shift key down while you open Safari.
Fixed?

Mail option "Send Windows-Friendly Attachments" is grayed-out

I use Mail 4.2 under OS 10.6.2.
The option "Send Windows-Friendrly Attachments" is grayed-out.
Is there a reason for that?
Could that mean that it in non functional?
Thanks for your help.

Thanks!
I understand what you mean and that was the explanation that I gave myself, but without really knowing if I was right. Your explanation seems logical.
I was raising this point, because I have a problem sending attached ".jpg" photos to a friend in Europe (France) who uses Outlook under Windows Vista. He keeps telling me that I am at the origin of the problem, this problem being that he receives the attachment within the core of the text and that the file is in ".bmp" rather than ".jpg"!
Otherwise, I am not having the problem with others Windows users, who also use Outlook (under XP, Vista, or 7). They all receive the ".jpg" file as such and can open it by clicking twice on it, and also save it as such.
But I'm trying to see if I do something wrong before I try to convince this friend that the problem may be on his side. In which case, I also would like to help him in finding out what the problem is (but I'm not expert of the "dark side").

No brighness option in windows 8

Similar Messages

Maybe you are looking for