No BT FON or BT OpenZone SSID being broadcast from...

I've been using BT for just under a year now. When I first installed my HomeHub2 I had 3 SSIDs broadcast; my own private, BT FON and BT OpenZone. For some reason I now only have my own private SSID available and I can seem to get BT FON available again.
I've tried opting out of BT FON and then opting back in again to no avail. I've also tried a full reset of the HomeHub followed by an opt out/in, but no change.
Can anyone explain why I've lost the ability to use BT FON and OpenZone. It was quite useful if friends visited and saved them using my monthly bandwidth allowance.

Hi Spillpot
I can check and see what status we have your for your FON opt in/out.
Could you drop me in an email please with your BT account and telephone number along with a link back to this thread.
Just send to the email address in my profile and mark FAO Craig please.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

Duplicate Networks Being Broadcast from my WRT54G (kind of)

When I search for networks to connect to I see both my SSID/secured network (despite broadcast of SSID being turned off) and I see an unnamed/unsecured network being broadcast with the same router MAC address. I'm positive that these are the same network, as I was using channel 11 and changed it to use channel 1 and both of these networks now show channel 1.
I have the latest firmware for my WRT54G ver.3 router and I've reset everything to factory defaults and reconfigured the router from scratch and it still broadcasts 2 networks. Any idea why?
Thanks!

MAC addresses can be faked. Are you sure the unnamed/unsecured network is not coming from your neighbor?
As far as I know, there is no way a WRT54G can generate two different networks at the same time. Certainly, it is possible that software might give a network a double listing, but it should not be listed as both secured and unsecured.
In some systems, "ghost" network listings can stick around for a while. They generally represent some of the "test" configurations you had, before you reached your final network settings. These networks do not exist anymore, but they continue to be listed.
To get rid of them do the following:
Give your router a new unique SSID. Do not use "linksys".
Set "SSID Broadcast" to "enabled". (Note: I used to recommend setting SSID Broadcast to disabled, for security reasons, but newer cracking methods have made this old trick useless. Also, broadcasting your SSID makes it easier for your computer to find and lock on to your router's signal.)
Now go to your computer, to "Preferred Networks". Delete the network with your old SSID. Delete all networks with SSID "linksys". While you are there, delete any other networks that you do not recognize, or that you no longer use.
Reboot your entire system.
Now reconnect wirelessly to your router. If you have trouble, go back to "Preferred Networks" and enter your new SSID, encryption method (if any), and key (if any). (Note: if you are using WEP, be sure to enter WEP "key 1", not the passphrase)
Now recheck for available networks. Be sure to click on the "Refresh" button. The unexplained networks should be gone.
If you still have unexplained networks, then you need to check other sources:
1) A wireless computer with the wireless card set to "Ad-Hoc" mode. (Did somebody from school loan your child a computer?)
2) Another wireless router plugged in. (Is you child having a LAN party?)
3) Your neighbor (or that guy parked in front of your house!) has a network with the same name and a fake MAC address.
Hope this helps.
Let me know how things turn out for you.

Second SSID not broadcasting on e3200

Has anyone seen an issue where the second SSID is not being broadcast from an e3200. I split the wireless networks and assigned a new name for the 5Ghz band. The broadcast SSID button is enabled for both networks. (2.4 & 5). The idea is I want to stream video on the 5Ghz band. Nothing seems to see it though, TV other PCs, etc.

Your devices must have a 5Ghz capable wireless adapter in order to see the 5Ghz band. You need to verify.

AP1231G SSID not broadcasting [config posted]

I recently purchased a set of AP1231G access points which were preconfigured as root and non-root bridges. Initially I couldn't get an SSID to show up, thinking I may have missed something that was preconfigured I wiped the config and started from scratch. I've reviewed several configuration guides to enable WPA with open authentication, but have not had any success with the SSID being broadcasted, let alone connecting to the AP.
Any help is greatly appreciated. Config below:
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ap
enable secret 5 $1$lgoW$zk7dfGkGLlZiOQuRFsxfV.
ip subnet-zero
no aaa new-model
dot11 syslog
dot11 ssid MW2
   authentication open
   authentication key-management wpa
   guest-mode
   wpa-psk ascii 7 02050D4808090C285F4D06
username Cisco password 7 02250D480809
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode ciphers aes-ccm
ssid MW2
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 10.81.220.5 255.255.255.0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
tftp-server exit
bridge 1 route ip
line con 0
line vty 0 4
login local
end

hi,
Yes it will not come with a internal antenna.. you have t oconnect a external antenna.. The AP comes with a RP-TNC connectors.. we need to connect the antenna to it. here is the link..
http://www.cisco.com/en/US/partner/prod/collateral/wireless/ps5678/ps6108/product_data_sheet0900aecd801b9068.html
http://www.cisco.com/en/US/partner/prod/collateral/wireless/ps5678/ps6108/product_data_sheet0900aecd801b9266.html
lemme if we have connected the antenna and then if we are still facing the issue..
lemme know if this answered your question!!
Regards
Surendra
===
Please rate the posts which answered your quiestion or was helpfull

BT Fon and BT Openzone FAQ's still incorrect

Dear BT,
I refer to my post made on the 12/08/2010 - http://community.bt.com/t5/BB-Out-About/Why-does-the-BTHH-transmit-the-Openzone-signal/m-p/37318#M22...
"The BT Openzone website will now be updated (when - unknown) to include the BT Home hub as a BT Openzone location as this is not clearly shown on the BT Openzone website at present".
But the BTFon FAQ still states -
"What’s the difference between a BT Openzone hotspot and a BT FON hotspot?
There's no difference to you when using the hotspots.
However, they're located in different types of places. BT FON hotspots are the Wi-Fi signals from BT Home Hubs owned by other members of the BT FON community. This means that individual BT FON hotspots may not be available in the future, because a customer may opt out of the service, or temporarily switch off their Hub.
BT Openzone is a premium wireless service, with hotspots in airports, hotels, stations and businesses around the UK. BT Total Broadband customers who are members of BT FON can access BT Openzone hotspots as well as BT FON hotspots. You can see the exact locations of BT Openzone hotspots using the map at www.btopenzone.com. BT FON vouchers bought by non-members are only valid at BT FON hotspots, and can't be used on the BT Openzone network".
and this is on the BTOpenzone site -
"What is BT Openzone?
BT Openzone is a wireless broadband (Wi-Fi) service that you can access in public places (hotspots) such as airports, hotels, coffee shops, motorway service stations and city centres. Get online at BT Openzone hotspots throughout the UK and the Republic of Ireland, and at selected locations outside the UK".
Is it not time to correct this?
-+-No longer a forum member-+-

Hi Craig
Thanks for the update
This thread is soooooooooooooo close to being solved
But...
Did they say when this update to the FAQs will be carried out? - I did give it nearly a year before bringing it back up!!
-+-No longer a forum member-+-

Tracing people logging on at BT FON and BT Openzon...

Hello,
Please can you tell me if it is possible for BT to trace where someone is logging on using BT FON or BT Openzone. My reason being I am being stalked and the emails come from IP addresses all over the place from btcentralplus.com. I think I know who the stalker is and he has a BT phoneline and internet account so would have log in details. If the police were to contact you could you tell them where he has logged on and whether this matches the IP addresses from the emails.
Thanks

Welcome to this forum. This is a BT domestic customer to customer help forum, any messages posted here do not go to BT.
If you need to contact BT, you can use Live Chat or Contact BT ,or telephone 0800 800 150
Its possible one of the forum members may be able to help you if its a general enquiry.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

BT Openzone and Wifi offload from mobile operators...

Having recently had confirmation that the BTHH transmits the Openzone SSID, I have just read a post regarding non BT customers using an iPhone to connect to Openzone. I asked a question regarding if BT are planning to use my BTHH as a wireless access point for the mobile phone industry (remote a... and the answer at the time was no.
Having just looked at a mobile phone providers website it appears that they can indeed connect to BT Openzone.
Therefore just for my own piece of mind - Can non BT customers connect to the BT residential HH or can they only connect to commercial areas (ie a cafe)?
Thanks
-+-No longer a forum member-+-
Solved!
Go to Solution.

DS wrote:
Having recently had confirmation that the BTHH transmits the Openzone SSID, I have just read a post regarding non BT customers using an iPhone to connect to Openzone. I asked a question regarding if BT are planning to use my BTHH as a wireless access point for the mobile phone industry (remote a... and the answer at the time was no.
Having just looked at a mobile phone providers website it appears that they can indeed connect to BT Openzone.
Therefore just for my own piece of mind - Can non BT customers connect to the BT residential HH or can they only connect to commercial areas (ie a cafe)?
Thanks
DS wrote:
I know the mods are very busy with other customers 'issues' and having to devote time and effort regarding the Adam n Jane saga but is there any chance one of you could answer the question raised by myself in post 1 or point me in the right direction to obtain the answer?
Many thanks and keep up the good work!!
edit. I forgot to write that I am now aware that non BT Customers can log in to BT Fon or BT Openzone by borrowing or in some cases by passing on a BT Customers primary email account and password details (Parent gives details to son/daughter whom have flown the nest (and are supplied by other BB suppliers) and son/daughter passes it on to friends). So my original question still stands apart from this method.
hi ho hi ho it's off to the CEO I go
Or could a mod kindly look into this for me please?
-+-No longer a forum member-+-

How do i keep certain songs from being uploaded from my library to my ipod

how do i keep certain songs form being uploaded from itunes to my ipod the check button does nothing
30gig ipod Windows 98

Set your iPod so you can manually manage your songs, see here for details:http://www.apple.com/support/ipod/tutorial/ipgettingstartedt3.html

I have 3 email accounts in Mail on Macbook Pro. Mail is only being sent from 1 account.

I have 3 email accounts in Mail. Mail is only being sent from 1 account, even though I select one of the other accounts in the "from" field. In my sent box, the "From" field says the accout I selected, but all recipients say they receive it from a different account. I set my composing preferences "send new messages from" to the main account, but all my mail is still being sent from a different account. I cannot see that this is happening, only people receiving it can. I noticed it because when they reply, it goes to a different account than what I sent to them. Any suggestions with what I should do?

Thank you! Funny. I had just found that answer eleswhere: http://simonwheatley.co.uk/2013/02/apple-mail-sending-email-from-the-wrong-accou nt/

HT204053 My wife and I have an iphone each using one apple id. How do we stop items being deleted from one phone and then find it has been deleted from the other?

My wife and I have an iphone each using one apple id. How do we stop phone contacts being deleted from one phone and then find it has been deleted from the other?
Also this works when one of us downloads an app it appears on the other iphone

You need to use separate iCloud accounts. This will mean that you can both have your own separate contracts and calendars and put an end to them being deleted by each other.
Whether or not you have a separate iTunes account, is up to you. If you have a separate iTunes accounts you will not be able to access the music, books, apps that have been purchased by the other. This may be exactly what you want, but it also means that you both may end up purchasing the same item.

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?
I currently run OS X 10.10.1
Now i have been trying to work on this for a while now and what i want to do should be simple but its apparently not.
Here is an example of what i want to happen.
I will have 2 tabs: Contact | Sales
Now Contacts will have the list of names and various information about a customer, While Sales will have one drop-down box for each Cell Row that will show the names of the person in tab contacts
for what i am wanting to do i cant use the data format pop-up menu because the list is edited everyday several times a day.
Now how do i do this, Excel can do this so how can numbers do it?

Hi Shegra,
Paste this into a applescript editor window and run it from there. In the script you may need to adjust the four properties to agree with your spreadsheet. Let me know if you have any questions.
quinn
Script starts:
-- This script converts column A in one table into an alphabetized list of popups. It copies the last cell in that column. Then reverts the column to text. It then refreshes popups in column A of a data table starting with a user defined row.
property DataEntrySheet : "Sheet 1" --name of sheet with popups to be refreshed
property DataEntryTable : "Sales" --name of table with popups to be refreshed
set copyRange to {}
property PopValueSheet : "Sheet 1" --name of sheet with popup values table
property PopValueTable : "Contacts" --name of table with popup values
set PopStartRow to {}
tell application "Numbers"
set d to front document
set ps to d's sheet PopValueSheet
set pt to ps's table PopValueTable
set s to d's sheet DataEntrySheet
set t to s's table DataEntryTable
set tf to t's filtered --this records filter setting on data Entry Table
display dialog "Start from row #..." default answer "" with icon 1 -- with icon file "Path:to:my.icon.icns" --a Week # row
set PopStartRow to {text returned of result}
tell pt --convert list to alphabetized popups
set ptRows to count rows
set copyRange to ("A2:" & name of cell ptRows of column "A")
set selection range to range copyRange
set selection range's format to text
sort by column 1 direction ascending
set selection range's format to pop up menu
-- popupsmade
set selection range to cell ptRows of column 1 of pt
set v to value of cell ptRows of pt
end tell
activate application "Numbers"
tell application "System Events" to keystroke "c" using command down
tell pt
set selection range to range copyRange
set selection range's format to text
end tell
tell t
set filtered to false
set tRows to count rows
set pasteRange to ((name of cell PopStartRow of column "A") & ":" & (name of cell tRows of column "A"))
set selection range to range pasteRange
tell application "System Events" to keystroke "v" using command down
set filtered to tf
end tell
end tell

How can I get a family member back after being removed from family share?

How can I get a family member back after being removed from family share?

See [[Replace your Sync information]] but read the cautions carefully.
* also see [[firefox Sync is not working]]
It is always a useful precaution to make manual bookmarks backups
* see [[Backing up and restoring bookmarks]]
The above article also explains about the autobookmark backups that firefox generates, but be sure to make manual backups as you work, it is very easy to overwrite the wrong set of backups.
I am not entirely certain what firefox is doing in your case, perhaps the synced Netbook does not have the expected set of bookmarks on it.
Presumably sync may be uninstalled or disabled like any other add-on
*see [[Uninstalling add-ons]]

How can i debug a rfc being called from sap

hello Gurus,
We made a RFC call from SAP r3 to sap grc nfe......we did not receive any data in sap grc .......we go to SM58 and there it gives
the message "Name or password is incorrect (repeat logon)u201D.
How can i find out where the data has stuck.
Please help.
BR
Honey

HI,
please have a look at the link below..
this may help u !!!
[Re: how can i debug a rfc being called from .net connector (NCO) v2.0?;
Best of Luck !!1
Regards
Ravi

User being removed from Domain Admins...how to find all servers his account is being used.

We have a user that is being removed from IT (more like being forcefully demoted) and our owner still finds him valuable in other departments. My challenge is to find all servers that he may be using his account locally on (as a service or added to a local
admin group). It hasn't happened yet, but we need to be prepared to say we know all the servers his account is on when the owner demotes him.
I'm hoping someone has an approach to this that doesn't include going through tons of Event Viewer Security logs. We do have System Center Configuration Manager and Operations Manager 2012 w/ SP1, but the guy that is responsible for those is the guy we are removing
and none of us are aware on how to use the possible tools that those have. If you feel that those would do the trick then please point me to a "how to" and I'll try to learn on the fly. Otherwise I'll take any other suggestions.
~Rick

Hi Rick,
Based on my research, you can filter events logs based on user name and event ID:
Advanced XML filtering in the Windows Event Viewer
http://blogs.technet.com/b/askds/archive/2011/09/26/advanced-xml-filtering-in-the-windows-event-viewer.aspx
Best Regards,
Amy

I don't want the 'chat' option. how can I disable it? I often get the message that I am being disconnected from chat because i've logged on from another computer. I never use chat, and it just seems to be a problem. How can I get rid of it?

I often get the message that I am being disconnected from chat because i've logged on from another computer. I never use chat, and it just seems to be a problem. How can I get rid of it?

Don't expect any wonders. If you use it heavily with multiple applications running at the same time, nobody can help you. It's physics: more usage => higher energy consumption.
Here you can find some tips to reduce the battery consumption. My tip: close applications if you don't need them right now and reduce screen brightness.

No BT FON or BT OpenZone SSID being broadcast from...

Similar Messages

Maybe you are looking for