No Caller ID from certain lines with iPhone 6

I'm now on my third iPhone, and iPhone 6, iOS 8.1.1, through Verizon. I never had this problem until I got this phone. Most calls I receive come in just fine where I can see the caller ID. But there are several that ALWAYS come across as "No Caller ID". For instance, any phone from my office comes to my phone as "No Caller ID". This used to work just fine on my iPhone 4S and 5S.
I did a test today and picked up an office phone and called myself. "No Caller ID". From the same phone I called a co-worker who has a 5S also on Verizon and the caller ID came through just fine on his. Based on what I can tell, it seems that office lines are the culprits. I had someone else call me from their office and the same thing happened.
What could be going on? Verizon tech support had no ideas.
So in summary, old iPhones, same office lines, worked fine. New iPhone, same office lines, doesn't show caller ID. Co-worker's iPhone, same office lines, works fine.
Thanks!

Thanks for the quick responses. It would be interesting for me to test with someone else who has an iPhone 6 on Verizon. I'm in the Boston area and I've noticed this while in Boston and at my home which is 40 miles away. Interestingly enough, weeks ago I set LTE for data only because I get a weak LTE signal near my house and wanted better reception on calls and didn't care about data because I was always on WiFi.
I just did another test and turned LTE off altogether and confirmed this because it switched from LTE and only showed 3G at the top. I placed a call from my office and still got "No Caller ID". Does this mean it's not a VoLTE issue?

Similar Messages

Sync existing contacts from Adressbook.app with iPhone fails

Hi!
Syncing works as advertised between my Mac, .Mac, Addressbook.app and my iPhone for ALL NEW CONTACTS, no matter where they are created (iPhone or Mac).
However ... if I choose to sync an old contact from Adressbook.app with iPhone the sync process in iTunes will always stall!
My setup, looks like this:
I sync a dedicated group of Addressbook.app with iPhone. Whenever I choose to add an old, existing contact from my Addressbook database to this group the next sync and all ongoing syncs will quit unexpectedly. iTunes will show a message telling me that iPhone disconnected.
The only way to cure this behavior I have come across is to manually
* enter a new contact with the existing data in Addressbook.app and adding it to my iPhone group
* delete the existing contact in Addressbook.app
* sync via iTunes
This is VERY annoying and tedious.
Anyone with a solution besides resetting sync history in iSync? This doesn't seem to help.
Thanks

Hi Shady!
I don't think that clearing the sync history is the only cure to this problem. At least it does not help for me. I believe that the problem with contact syncing is not monocausal, hence the cure with the sync history won't heal the manifold of root causes.
My situation is as follows:
What works great when syncing back and forth between the iPhone and the addressbook.app
. *Adding new* contacts or updating contacts +on the iPhone+
. *Editing or updating existing* contacts +on the iPhone+
. *Adding new* contacts +in addressbook.app+
What does not work at all:
. Choosing any existing (created before using or syncing with iPhone) contact and sync it with the iPhone
I sync only a certain group in addressbook.app, not all contacts.
The only way to cure this problem for me so far: Adding a new contact on iPhone or addressbook.app, which is a pain given that all the contact data is already present.
Interesting enough this was not a problem from the beginning. During the first couple weeks or months I could choose any of my "old" contacts and grow that group as I saw fit and everything worked flawlessly...
Very disappointing...

New path-layers from every line with pen tool?

Hi! I'm currently using Illustrator CS6 as a test version and when I use the pen tool to make a beaver (school assignment), it all end up in one layer. I want to have a new path-layer from every line with the pen tool, so I can remove lines in the layer panel too. At the moment it's one layer that have a picture of a beaver and I can't see the individual lines I've drawn. When I used CS5 recently I didn't have this problem.
Is it a setting I can change or does it have something to do with the news in CS6?

If you want to see a "layer" for every object change the Layer Panel display by choosing Panel Options from the Layer Panel Menu. In the lower section of the panel options window, make certain Groups and Objects are both checked. You'll then see a "layer" for each object.
I am quoting "layer" here because technically they aren't layers. They look like layers and are in the Layer Panel, but they don't exactly allow the options which actual Layers allow. You will be able to select and move the objects in the panel this way however.

How can I fill structure from the line with contetnt of a XML file inside?

How can I fill structure from the line with contetnt of a XML file inside?
I have array of lines with XML documents inside. All XML's have the same structure.
I need to fill array of structures (with the same structure like given XML's) from data of these XML's.
How can I do this? I am trying Transformation with ora:parseEscapedXML, but receive error: "XPath expression failed to execute.
Error while processing xpath expression, the expression is "ora:processXSLT("Transformation_1.xsl", bpws:getVariableData("ProcessedFiles"))", the reason is javax.xml.transform.TransformerException: javax.xml.transform.TransformerException: Could not find function: parseEscapedXML.
Please verify the xpath query."

Ive posted the new code but now I'm getting a FileAlreadyExistException error. How do I handle this exception error correctly in my code?
import java.io.IOException;
import java.nio.file.FileAlreadyExistsException;
import java.nio.file.Files;
import java.nio.file.Paths;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.parsers.ParserConfigurationException;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
import org.w3c.dom.Node;
import org.w3c.dom.NodeList;
import org.xml.sax.SAXException;
public class MyDomParser {
public static void main(String[] args) {
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
try {
DocumentBuilder builder = factory.newDocumentBuilder();
Document doc = builder.parse("ENtemplate.xml");
doc.normalize();
NodeList rootNodes = doc.getElementsByTagName("templates");
Node rootNode = rootNodes.item(0);
Element rootElement = (Element) rootNode;
NodeList templateList = rootElement.getElementsByTagName("template");
for(int i=0; i < templateList.getLength(); i++) {
Node theTemplate = templateList.item(i);
Element templateElement = (Element) theTemplate;
System.out.println(templateElement.getAttribute("name")+ ".xml");
for(int i=0; i < templateList.getLength(); i++) {
Node theTemplate = templateList.item(i);
Element templateElement = (Element) theTemplate;
String fileName = templateElement.getAttribute("name") + ".xml";
Files.createFile(Paths.get(fileName));
System.out.println("File" + ":" + fileName + ".xml created");
} catch (ParserConfigurationException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (SAXException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();

How can I access my Call Handlers from outside line (outside district)

CISCO VoIP System Info:
Cisco Unity Connection version: 8.6.2ES25.21900-25
CM Admin System version: 8.6.2.21900-5 on C200M2 Servers
Our engineer setup our Call Handlers so that in our to change the recordings on them, you diall 7800 from a phone inside the office, or as he put it in the procedures, from within the district. Once you dial, you need to enter the user code, password, then the extension of the Call Handler, and we have no problems recording/changing any Call Handlers. However, due to possible inclement weather approaching in the next few weeks, I was asked how we cna change them from an outside line (manager's home, etc.). We cannot access from an outside line. 7800 is not a DID, it is simply the extension he assigned to access the call handlers. I even went so far as to setup a dummy phone and forward it to 7800, but this does not work either. It forwards to the extension's voicemail. Is there a way we can access the Call Handlers from an outside line? Any help would be gretaly appreciated. Thank you in advance.

Hey Joseph,
Go Flames ....errrrrrrrrrrrrrrrrrr maybe not so much
What you are trying to get to is really just the Greetings Administrator
conversation and there are multiple ways to get there.
For example, you can set up a Caller Input off any mailbox (Press 1-9) let's say 7 to
go to Conversation> Greetings Administrator. So you could set this on the managers mailbox
and when he calls his own number from home once his greeting
kicks in he can press 7 to link to the Greetings Administrator conversation
or
You could set up a DID DN xxx-xxx-2345 as a CTI-RP and set Call Forward All to reach Unity Connection.
In this case you will need to use the Forwarded Routing Rules = xxx-xxx-2345 route to
Greetings Administrator. Make sure to move this rule to the bottom of the list!!
Cheers!
Rob
"Why do the best things always disappear "
- The Band

Why cannot iTunes sync movies from iPhoto taken with iPhone

I take little movies with iPhone. (5Mb)
iPhoto copies then to the Mac with the Photos.
Movie plays in iPhoto.
In iTunes I say Sync event and tick include videos on. The movies are not copied back to the iPhone.
Checked in iPhoto, event says 18 items (17 are photos one is the movie MOV04391.MPG)
In iTunes > Photos tab. the event only shows 17 items.
Thanks in anticipation...

Try launching iPhoto while holding Option, to create an alternate iPhoto library that you can test with. You can always switch back to the original iPhoto library launching iPhoto while holding Option again.
If it works in the new test library, you'll probably want to switch back to the main library and then rebuild it by holding down the Command and Option keys when launching iPhoto.
Also, when you email photos from the iPhone you should see an option to email as actual size, along with the compressed options.
WTH.

How do I synch my podcasts directly from my MacBook with iPhone/iPad (without iCloud)?

Hi,
I am using an MacBook with iTunes 11.2.2. (3) and an iPhone/iPad with the most recent iOS 7.1.2.
What annoys me is the coud symbole on my iPhone/iPad when I want to listen to my Podcasts. Is there any way to have a direct synchronization of podcasts from my MacBook to my iPhone/iPad? In a nutshell: why do I have to download the same content twice?
Unfortunately, I am sometimes in remote areas without internet/mobile phone coverage. Thus, I would simply get all stuff from my MacBook on my iPhone/iPad without any (unnecessary) detour via the cloud just as in the back old days, when you had to use iTunes for any data transfer to you iPod.
Looking forward to your insights!
Best regards
Torsten

Hi Torsten_75,
Welcome to the Support Communities! If I'm understanding your question correctly, you want to be able to sync Podcasts directly from your Macbook with your iPhone/iPad. You can still do that via the iTunes software on your Mac and the Podcasts app for your device:
Podcasts app for iOS: Syncing podcasts
http://support.apple.com/kb/HT6202
Mac or PC
Open iTunes and then click the iTunes menu.
Choose Preferences and then click the Store tab.
Place a checkmark next to "Sync podcast subscriptions and settings."
Details on syncing
Enabling syncing for podcasts syncs subscriptions, stations, and play position. Here are the details on everything that syncs.Subscriptions
Subscribing
Syncing podcast subscriptions will download the newest episode for each podcast you are subscribed to (but not previous episodes for that podcast). If you choose to download other episodes for a subscription on one device, they won't automatically download to your other devices. See the transferring section below for more information.
Unsubscribing
If you unsubscribe from a podcast on one device, all of your other devices will unsubscribe to that podcast. If you re-enable a subscription to a podcast, all of your other devices will subscribe to that podcast again.
Deleting
When you delete a subscription on a device you'll also automatically be unsubscribed to it on all of your devices. If you delete a podcast on your iOS device, iTunes on your computer will show the message "This podcast has been deleted from another device, but has saved episodes."
If you click Resolve you'll see the message "Do you want to delete or restore syncing of the podcast?"
If you want to keep any episodes that you've saved on your computer, click Restore Sync on the the dialog box. The subscription will then be added back to your other devices.
If you click Delete, the podcast and all its episodes will be deleted. If you delete a podcast subscription on your computer, it will delete the subscription on your iOS devices including downloaded episodes (unless they're marked as Saved).
StationsWhen you create a station in iTunes on your computer, it will appear on your other devices. If you create a station in the Podcasts app for iOS it will appear on your other devices. Any station settings you change will also sync to all of your devices. If you delete a station on one of your devices, it’ll delete on every other one too.Playback positionPodcasts can remember your playback position between devices and computers so you can always start where you left off. As long as syncing for Podcasts remains on for your iOS device, playback position will sync. However, you'll need to enable this setting in iTunes on your Mac or PC since it's off by default.On your computer
From iTunes pull-down menu select Preferences
Click the Store tab
Enable "Sync playback information across devices." It may take a few minutes for syncing to finish.
Transferring episodes and playlists
Podcast episodes on one device don't automatically download on your other devices. If you want all your downloaded episodes to appear on your other devices, you'll need to sync your iOS devices to your computer over Wi-Fi or with a USB cable.
Connect your iOS device to your Mac or PC with iTunes.
Click the Podcasts tab.
Pick which downloaded podcasts should appear on your iOS devices as well.
To sync an iTunes playlist of podcasts to your iOS devices, place a checkmark next to them under "Include Episodes from Playlists." These playlists will appear in My Stations in the Podcasts app for iOS.
Click Sync.
Cheers,
- Judy

How to read a file starting from certain line number

Hi there
I need to read a large text file line by line. The user will have the ability to stop at any time and run the application to resume reading and processing. For example, if the user stops at line 350, next time when the user run the application, I want him to be able to start with line 351. I am using BufferedReader to read the file. What should I do enable to read the file starting certain line number? Each line in the text file is not equal in length, so I can not control by bytes ...
Thanks!

Since you can't count bytes, there's no way of knowing where to jump except actually reading trough all those preceding lines. (You don't have to store them, though.)
for(int linenum=0, linenum<jumpTo; ++linenum) {
reader.readLine();
}

Invoking Forms 6i application from command line with parameters

Hi,
I have a java application that requires to start up and execute an existing Forms 6i application.
I am not a java person, and I could not find any help regarding this. If anyone knows how to execute an fmx(6i) from within a java application, then please let me know. The java application has to pass in parameters so that the the Forms application opens up with the correct data.
One alternative suggested was that the java application execute a command line invocation of the Forms application. I am looking for the correct and complete syntax to do this. The fmx can be invoked from the command line with the following entered at the dos prompt -
c:\>OraFrm6i\Bin\ifrun60.exe<module name> <userid/password@db>. This works fine and the Forms application is executed.
The requirement is to pass a couple of user defined parameters to the Forms application which can be used by it to query the database and display the correct information when it opens.
Any help on this would be greately appreciated.
Thanks
Shailesh

Shailesh,
Create a parameter in your form - eg. COUNTRY_CODE and add any startup code.
Then add the parameter to your command line (or put it in a *.bat file)
c:\>OraFrm6i\Bin\ifrun60.exe<module name> <userid/password@db> country_code=UK
JR

Call Webgui from WD application with only one log on

Hi
In my first application using WD ABAP, requirement is to call WEBGUI from the application.
Calling WEBGUI is working fine but while calling WEBGUI the system asks for another log-on which is not required.
When the application first executes it asks for logon again while calling WEBGUI the system asks for another logon,
please let me know how can we avoid second logon?
Note - I am using RFC host name while creating URL for WEBGUI.
Thanks, in advance

Hello Trupti,
Are you using fully qualified host names?
Edgar

Call function from data base with clob input parameter.

Hello,
In this project I use Jdev 11g.
I call function from database.
create or replace function get_fa_list (
p_fa_id_list in clob
return sys_refcursor
is
vCursor sys_refcursor;
begin
put_msg ('begin');
if p_fa_id_list is null then
put_msg ('CLOB is null!');
else
put_msg ('size CLOB: ' || dbms_lob.getlength (p_fa_id_list));
end if;
put_msg ('Save');
open vCursor for
select rownum as id, s.*
from (
select f.latitude, f.longitude, count (distinct f.res_id) as res_count, count (*) as fa_count, 16711680 as color, res_concat_distinct (f.res_id) as station_list
from mv_frequency_assignment f, table (SplitClob (p_fa_id_list, ',')) l
where f.ext_system = 'BI' and
f.ext_sys_id = l.column_value
group by f.latitude, f.longitude
) s;
put_msg ('Open and End');
return vCursor;
end get_fa_list;
I use TopLink in ejb.
i use follow code for call function and get result.
public List<TmpResPoints> findAllPointsBI(String p_id){
UnitOfWork uow = getSessionFactory().acquireUnitOfWork();
uow.beginEarlyTransaction();
StoredFunctionCall call = new StoredFunctionCall();
call.setProcedureName("get_fa_list");
call.useUnnamedCursorOutputAsResultSet();
ClobDomain c = new ClobDomain(p_id);
//System.out.println(c.toString());
call.addNamedArgumentValue("p_fa_id_list", c);
ReadAllQuery query = new ReadAllQuery();
query.setReferenceClass(TmpResPoints.class);
query.setCall(call);
List<TmpResPoints> result = (List<TmpResPoints>)uow.executeQuery(query);
uow.commit();
uow.release();
return result;
But size parameter "p_fa_id_list" is 0. (geting from temp table in Data base). this code in function >>
if p_fa_id_list is null then
put_msg ('CLOB is null!');
else
put_msg ('size CLOB: ' || dbms_lob.getlength (p_fa_id_list));
end if;)
How I can call this function from dataBase and get result?
thx,
Demka.

What is the SQL generated?
The argument should just be the Clob value (a String) not the domain object.
Also try addNamedArgument, and then pass the named argument to the query.
James : http://www.eclipselink.org

Make and receive voice calls from/to PC with iphone

Dear,
I am looking for a app for following :
I have a PC running Vista or Windows 7
I have a hardwired headset + microphone connected to the PC (is essential because I am running also a voice operated software tool on the pc).
I connect my iphone 4 with the pc by USB cable
I want to make/receive calls by using this PC application.
Can someone help me with this ? Any alternative ideas ?
BR
Dany

http://support.apple.com/kb/ts2802
Jackson

Moving from T-Mobile with iPhone trade in ?

Is anyone else moving from T-Mobile to Verizon and making use of the trade-in program to get an iPhone 6 ? If so, what has been your experience with Verizon so far ?

I don't work for T-Mobile or Apple, so I can't say for certain, but T-Mobile has said that they expect to finally get the iPhone this fall, and if that happens, then you will be able to use their 3G/4G network.
There are actually now a number of smaller, prepaid carriers available for the iPhone. Virgin Mobile is just one of them, and they have a rather affordable plan.

Voice calls breaking up on EDGE with iphone and AT&T

When I am on a voice call using the iPhone on EDGE the callers voice often breaks up. This also happens when I dial voicemail and listen to messages.
This is my first time using AT&T. Is this normal for AT&T's EDGE network or is this possibly a problem with my iPhone. This happens even if I have full bars on EDGE. I've tried resetting the phone as new and getting a new sim card and updating the firmware but voices still break up. Has anyone else experienced this?

I got a replacement iphone and the problem with voice calls breaking up persists. I have no idea what the problem is since there are so many variables and I don't have all the information. I just know that I never had this sort of problem in the 9 years I was on Verizon with any phone. I really enjoy this device for everything besides the phone functionality. It would be cool if I could just pay for data on this phone without the voice so I could get a Verizon phone for voice and keep the iphone for data but I know that would never happen. Well, I still have a couple weeks to figure out what I'm going to do.

Calling report from a form with user input parameters

Hello,
I am new to Oracle reports. I have an application coded in 6i. I am currently running the application in Oracle Forms Builder 9i. There are also few reports which are called from the forms. Since the application was developed in 6i, the report was called using Run_Product. The forms pass a set of user parameters to the report using the parameter list pl_id. The syntax used was Run_Product(REPORTS, 'D:\Report\sales.rdf', SYNCHRONOUS, RUNTIME,FILESYSTEM, pl_id, NULL);
I learnt that the Run_product doesnt work in 9i and we need to use run_report_object. I have changed the code to use run_report_object and using web.show_document () i am able to run the report from the form. There are 2 parameters that need to be passed from forms to reports. The parameters are from_date and to_date which the user will be prompted to enter on running the form. In the report, the initial values for these parametes are defined. So, the report runs fine for the initial value always. But when i try to change the user inputs for the form_date and to_date, the report output doesnt seem to take the new values, instead the old report with the initial values(defined in the report) runs again.
Can someone give me the code to pass the user defined parameters to the report from the forms? I have defined a report object in the forms node as REPTEST and defined a parameter list pl_id and added form_date and to_date to pl_id and used the following coding:
vrepid := FIND_REPORT_OBJECT ('REPTEST');
vrep := RUN_REPORT_OBJECT (vrepid,pl_id);
But this doesnt work.
Also, Should the parameters defined in the forms and reports have the same name?

Thanks for the quick response Denis.
I had referred to the document link before and tried using the RUN_REPORT_OBJECT_PROC procedure and ENCODE functions as given in the doc and added the following SET_REPORT_OBJECT_PROPERTY in the RUN_REPORT_OBJECT_PROC :
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,' FROM_DATE='||:BLK_INPUT.FROM_DATE||' TO_DATE='||:BLK_INPUT.TO_DATE||' paramform=no');
But this also dint work. Please help me understand what difference does setting paramform=no OR paramform=yes make?
In the report, i have defined the user parameters as FROM_DATE and TO_DATE respectively so that they match the form datablock BLK_INPUT items FROM_DATE and TO_DATE.
My WHEN_BUTTON_PRESSED trigger is as below:
DECLARE
report_id report_object;
vrep VARCHAR2 (100);
v_show_document VARCHAR2 (2000) := '/reports/rwservlet?';
v_connect VARCHAR2 (30) := '&userid=scott/tiger@oracle';
v_report_server VARCHAR2 (30) := 'repserver90';
BEGIN
report_id:= find_report_object('REPTEST');
-- Call the generic PL/SQL procedure to run the Reports
RUN_REPORT_OBJECT_PROC( report_id,'repserver90','PDF',CACHE,'D:\Report\sales.rdf','paramform=no','/reports/rwservlet');
END;
... and the SET_REPORT_OBJECT_PROPERTY code in the RUN_REPORT_OBJECT_PROC procedure is as:
PROCEDURE RUN_REPORT_OBJECT_PROC(
report_id REPORT_OBJECT,
report_server_name VARCHAR2,
report_format VARCHAR2,
report_destype_name NUMBER,
report_file_name VARCHAR2,
report_otherparam VARCHAR2,
reports_servlet VARCHAR2) IS
report_message VARCHAR2(100) :='';
rep_status VARCHAR2(100) :='';
vjob_id VARCHAR2(4000) :='';
hidden_action VARCHAR2(2000) :='';
v_report_other VARCHAR2(4000) :='';
i number (5);
c char;
c_old char;
c_new char;
BEGIN
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME,report_file_name);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,report_server_name);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,report_destype_name);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESFORMAT,report_format);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,' FROM_DATE='||:BLK_INPUT.FROM_DATE||' TO_DATE='||:BLK_INPUT.TO_DATE||' paramform=no');
hidden_action := hidden_action ||'&report='||GET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME);
hidden_action := hidden_action||'&destype='||GET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE);
hidden_action := hidden_action||'&desformat='||GET_REPORT_OBJECT_PROPERTY (report_id,REPORT_DESFORMAT);
hidden_action := hidden_action ||'&userid='||get_application_property(username)||'/'||get_application_property(password)||'@'||get_application_property(connect_string);
c_old :='@';
FOR i IN 1..LENGTH(report_otherparam) LOOP
c_new:= substr(report_otherparam,i,1);
IF (c_new =' ') THEN
c:='&';
ELSE
c:= c_new;
END IF;
-- eliminate multiple blanks
IF (c_old =' ' and c_new = ' ') THEN
null;
ELSE
v_report_other := v_report_other||c;
END IF;
c_old := c_new;
END LOOP;
hidden_action := hidden_action ||'&'|| v_report_other;
hidden_action := reports_servlet||'?_hidden_server='||report_server_name|| encode(hidden_action);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,'pfaction='||hidden_action||' '||report_otherparam);
-- run Reports
report_message := run_report_object(report_id);
rep_status := report_object_status(report_message);
IF rep_status='FINISHED' THEN
vjob_id :=substr(report_message,length(report_server_name)+2,length(report_message));
message('job id is'||vjob_id);pause;
WEB.SHOW_DOCUMENT(reports_servlet||'/getjobid'||vjob_id||'?server='||report_server_name,' _blank');
ELSE
--handle errors
null;
END IF;
In the code - " hidden_action := hidden_action ||'&'|| v_report_other; " in the RUN_REPORT_OBJECT_PROC procedure above, how do i make sure that the v_report_other variable reflects the user input parameters FROM_DATE and TO_DATE ??? v_report_other is initialised as v_report_other VARCHAR2(4000) :=''; in the procedure. Will ensuring that the v_report_other contains the user input parameters FROM_DATE and TO_DATE ensure that my report will run fine for the input parameters?
Thanks in advance.
Edited by: user10713842 on Apr 7, 2009 6:05 AM

No Caller ID from certain lines with iPhone 6

Similar Messages

Maybe you are looking for