No Camera After upgrade to windows 10

HII have MIIX 2 10.After upgrading to windows  10 everything works fine But I have no camera.If I try to activate the camera application I get an error - no device found. I can see in the device manager that there is no camera device. Can anyone link me a device driver? Or any other fix for this issue?Many ThanksChaim

HIDriver Fixed.You cannot install only the camera driver because there are decencies between other drivers and issue continues to be the same. Even the driver version doesn't change.When installing the entire package will get a notice that you are installing an older version of driver. Just confirm and when told so – reboot. Camera now works and I can't see any other problems. Many thanks for your advice.Chaim

Similar Messages

  • Can't print in PSE11 after upgrading to windows 8.1

    I have just upgraded from Windows8 to 8.1 and now can't print in PSE11. For some reason can in PSE7

    I can print from other programs but not PSE. I have updated the drivers. I have attached 3 screen shots with error messages.
    Tracy Ferreira 2607 Woodruff Rd.
    Suite E-126
    Simpsonville, SC 29681(864)350-4724www.onthespotportraits.com  
          From: hatstead <[email protected]>
    To: Tracy Ferreira <[email protected]>
    Sent: Tuesday, March 10, 2015 1:58 PM
    Subject:  can't print in PSE11 after upgrading to windows 8.1
    can't print in PSE11 after upgrading to windows 8.1
    created by hatstead in Photoshop Elements - View the full discussionWhat happens when you try?Any error messages?Do you have the latest drivers for the printer? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7274523#7274523 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7274523#7274523 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • My HP LaserJet 1536 Scanner will not work after upgrading to Windows 10

    I just upgraded to Windows 10, and now the scanner will not work, although I can still print.  I downloaded the latest driver, but this does not seem to help.  The error message I get states that scanner communication cannot be established. Please let me know if you have any suggestions. Thanks!

    Greetings , I saw your post regarding the problems you are having with scanning after upgrading to windows 10.
    I would start with the simple, have you tried just restarting the computer? Have you made sure your computer has all of it's windows updates? How can I tell if my computer is up to date? Most products do have updated software available for Windows 10, did you install the correct driver?HP LaserJet Full Feature Software and Driver I've also seen a few posts that say the Windows 8.1 driver will work for Windows 10 as well, so you could try that too.  HP provides a free tool called HP Print and Scan Doctor to diagnose and resolve printing and scanning problems. I recommend downloading and running the HP Print and Scan Doctor, if it doesn't fix it automatically let me know what errors or messages you receive.  Do you know if you are able to scan using Paint? To Scan from Paint: HP Multifunction Printers - How to Scan: Windows 8 
    (It's the same for Windows 10, from what I've been told)Right-click the Start button () in the lower left corner of the screen, click Search, and then type ...Click Paint in the results.Click File, and then click From scanner or camera.Select your printer, click OK, and then click Scan.  Have you tried just using the New Scanner app in Windows 10? It's the same as the one for Windows 8. Here are some resources;New Scanner app in Windows 10Scan app for Windows: FAQ
    And a Video link...    Please let me know if any of these steps resolved your issue, or if there is anything else I can do to help.  I look forward to hearing from you!  Thanks, 

  • Cannot print a PDF file after upgrading to Windows 8.1

    Cannot print a PDF file after upgrading to Windows 8.1
    I can print anything else from either the Desktop or Start but not a PDF.  No error message but just does not print.
    Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

    Cannot print a PDF file after upgrading to Windows 8.1
    I can print anything else from either the Desktop or Start but not a PDF.  No error message but just does not print.
    Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

  • After upgrading to windows 8, spectre 14 usb3 slow

    are there any usb3 fast drivers for spectre 14 after upgrading to windows 8, the drivers of windows 7 there are not compatible with windows 8

    Hello rumbacha.  I understand you're trying to locate some drivers for your SPECTRE for Windows 8.  
    There are quite a few versions of the SPECTRE so I will need your product number to identify exactly which model you have.  This document can show you where the product number is located.
    Once I have this I will attempt to locate the drivers for you.
    Have an excellent day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • After upgrading to Windows 8.1 firefox longer works. I got it to load but screen is either blank or doesn't go to target address

    after upgrading to Windows 8.1 from 8 nothing works correctly. Firefox 1st received 'unable to load XPcom' After resetting and uninstalling several times Firefox now loads to either a support screen or blank screen. It accepts address input but doesn't execute to target. So far I have been unable to roll back upgrade.
    Although IE11 works, it doesn't work correctly.

    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
    If you keep having problems then do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 24: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • After upgrade to Windows 8.1, ipod nano 7th gen not recognized

    /after upgrading to Windows 8.1, ITunes does not recognize my ipod nano 7th gen.  I have uninstalled and reinstalled ITunes but no luck.  I have gone through all steps in troubleshooting, but it still doesn't recognize it.  Help!

    Hi cindywindy,
    If your iPod Nano is no longer recognized in iTunes after a recent system upgrade, you may find the following article helpful (apologies if you have already seen it):
    Apple Support: iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Regards,
    - Brenden

  • Keyboard wireless key not working after upgrading to windows 8.1

    Hello,
    I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
    Kindly suggest me some solution.
    Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
    Thanks.

    Hi @Jayesh_Bhadja ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
    The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook.  Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
    Make sure all your updates have been completed. I would try restarting my Notebook a few times.
    If that does not help I would uninstall the keyboard from the Device manager.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Problems with your HP printer after upgrading to Windows 8.1

    If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
    www.hp.com/go/tools.
    I was an HP employee
    If I have helped you solve your issue please mark it as solved
    **Say Thanks By Clicking on the Kudos Star**

    Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions  work just fine.
          I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

  • Ethernet LAN not working after upgrading to windows 8.1

    After upgrading from Windows 8 to 8.1, my Ethernet LAN is no longer working. Wireless LAN connectivity is OK. I have run the HP Support Assistant and downloaded the drivers for 8.1. Hovever, I do not see a 8.1 driver listed for the Ethernet LAN.

    You're very welcome. See if the recovery manager still works so you can roll back to W8. Please read this guide for how to use it. http://support.hp.com/us-en/document/c03489643 If it doesn't then you will have to order a set of recovery disks from HP, or you can install this plain W8 OEM software this guy has posted on a link. Lots of folks have used it successfully, which is why I posted it. https://docs.google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?pli=1 Then use this tool to make the iso file bootable to a DVD or 4+ GB USB flash drive. http://www.microsoft.com/en-us/download/windows-usb-dvd-download-tool Yes, that really stinks why you and I could not upgrade without an issue. I disabled about 5 or 6 devices in the device manager and the code 12 would not go away. I have no clue why the PC works fine on W8 but not on W8.1. My notebook is a few years older than yours and it worked fine on W8.1 but not on W10. Go figure...

  • Wifi problem of G560 after upgrading to windows 8.1

    Hi,
    I have a lenovo G560. After upgrading from windows 8 to windows 8.1, I cannot connect to wifi. I was wondering if someon else has the same problem.

    hi amardoukhi,
    Welcome to the Forums.
    Your issue might be similar to this thread. Try the solution that was posted to rollback to an older driver version.
    The solution was to:
    1. Open Device Manager (press WInkey+R > type devmgmt.msc)
    2. On the Device Manager, navigate to Network Adapters > right click on the wireless adapter and choose Update Driver Software
       - Link to picture
    3. On the Driver Update Window, choose Browse my computer for driver software >  Let me pick from a list of device drivers on my computer and choose the wireless card on the list.
       - Link to picture
       - Link to picture
       - Link to picture
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Loss of internet connectivity after upgrading to windows 8.1

    Hi, After upgrading to windows 8.1 from windows 8 i am experiencing major problems , loss of internet connectivity for no reason both I.E. and G/CHROME are now taking an age to open there are no virus issues as far as i can see.
      I have uninstalled and re-installed  windows 8.1 about four times over the past 9 months or so and the same thing happens after all the updates are in it runs like a dream for say 6weeks or so then i get the same faults as described above then i uninstall/ re-install ok for 6 weeks .
      I would apprieate any help or advice thanks 

    Hi @BMATH 
    Thank you your query.
    I understand that after updating to Windows 8.1 about every 6 weeks you loose wireless connectivity for no reason  and the web pages are very slow to open.  If you uninstall and reinstall Windows 8.1 it works fine again for about the same amount of time.  You have done this about 4 times with the same result each time.
    Do you know if there is any changes at that time , perhaps an update?
    You stated you do not believe you have any viruses.  Just to be sure here are two links that will help confirm that.
    Microsoft Malicious Software Removal Tool
    Microsoft Safety Scanner
    After updating to Windows 8.1 have you checked for Windows updates?
    Have you ran HP Support Assistant ?
    Here is a link to Troubleshooting Wireless Network and Internet (Windows 8) that may also help.
    If the issue should remain please contact HP support for assistance.
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Best of Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • S3-S440 no wifi after upgrading to Windows 8.1

    After upgrading to windows 8.1, the wifi is not working anymore.
    I cannot find the wifi driver in the device managerment and I cannot see any information about wifi driver.
    I try to re-setup the driver many times and checked the wireless module was enabled in the BIOS. But it is no progressing at all. I can only access to the Internet through the wire now...
    Please help me.!!!

    Salheureux, welcome to the forum.
    You should go into the Control Panel / Sound to assure that your sound device is set to Default.  Also, right click on the speaker icon in the Taskbar / Playback devices and check that your speakers are displayed.
    Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Bluetooth Not Working after upgrading to Windows 8.1

    My Laptop is HP Pavilion G6 2015 tx after upgrade to windows 8.1, bluetooth is not working also the battery drain has increased anyone know a fix atleast for bluetooth problem ???

    You're very welcome.
    That is very interesting, because I didn't know of anyone who upgraded to W8.0 with a Ralink wireless card with the BT 3.0 radio that got the BT to work at all.
    We tried the W7 drivers, and they didn't work.
    That is why you don't see a W8 Ralink BT driver for the bluetooth on your PC's support and driver page amongst the other 11 drivers listed.
    The Ralink 3.0 version of BT is not supported in W8.
    While somehow the BT has worked in W8 for you, I'm afraid your luck has run out.
    Unless by some fluke, HP installed a card with the BT 4.0 radio on your model...
    You can try this W8 driver for the Ralink card with the BT 4.0 radio, but don't get your hopes up.
    http://h20565.www2.hp.com/portal/site/hpsc/templat​e.PAGE/public/psi/swdDetails/?sp4ts.oid=5229457&sp​...

  • LASERJET 1160 PRINTER RUNS A BLANK PAGE BETWEEN EVERY PRINTED PAGE AFTER UPGRADING TO WINDOWS 8.1

    Laserjet 1160 printer runs a blank page between every printed page after upgrading to Windows 8.1

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
    Click on New Post.
    I hope this helps.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for