No camera icon next to "slide to unlock" after update.

After updating my ipod, there isn't a camera icon next to my unlock slider.

just click the Home Button twice, and the camera icon will appear next to unlock slider

Similar Messages

Camera icon next to "slide to unlock"

iphone 4: Why doesn't the camera appear next to "slide to unlock" bar after updating to 5.0.1 as it did in 5.0

Thank you for asking that question - I've been trying to figure this out for a while now. I finally caved and brought my phone into the Apple store this afternoon and no one there could figure out why I didn't have the camera icon on the lock screen either. I was told to reset my phone to the original settings, then load from the back up and that should do it - nope. Yet no one told me, or even knew?, that you had to double tap the button. Why don't they say that anywhere, all the advertisements on TV, and video on the website never says or shows that.
And what's the point of the 'quick access' to the camera button from the lock screen if you have to remember to double tap the home button?? You'd think at this point they would have had that figured out - unless double tapping the home button had been used for other things in the past that I just didn't know about? Very frustrating past couple of weeks trying to figure this out, and all over a little camera icon! Thanks for letting us know how to access it, I honestly wouldn't have figured it out - and clearly the staff at the store didn't have a clue either!

Why does camera icon appear next to slide to unlock bar on my IPod touch?

why does camera icon appear next to slide to unlock bar on my IPod touch? It makes a shutter sound when I turn the touch off

rsejnost wrote:
why does camera icon appear next to slide to unlock bar on my IPod touch? It makes a shutter sound when I turn the touch off
The camera icon appears so that you can take a picture quickly without having to enter your password. It is not responsible for the shutter sound. The Touch always made that sound when manually closing or going to sleep even with older iOS that did not have the camera icon.

I can no longer view my photos through th photo icon. There is not an icon on my "slide to unlock" screen that when touched starts a slide show of my photos. How do I turn that off so I can access my photos as before?

I can no longer view my photos through th photo icon. There is not an icon on my "slide to unlock" screen that when touched starts a slide show of my photos. How do I turn that off so I can access my photos as before?

Oroilore-
I do not see a way to disable the Picture Frame icon. I looked at Settings-Picture Frame, but none of the options turns it off. The only way I can thinik of, would be if all of your photos had been deleted. If there were no photos, you couldn't have a slide show!
One thing to try is to reset (reboot) your iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart after a couple of minutes. Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
Fred

The front camera of my iPad 3 doesnt work after updated ios7

The front camera of my iPad 3 doesnt work after updated ios7

Have you tried closing the Camera app completely and seeing if it works when you re-open the app ? From the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
If neither fix it then you could try contacting Apple.

TS4036 My camera roll will not restore from iCloud after updating my iPhone 4 to iOS 6. It shows I have 1.7 gigs of photos stored on camera roll but none are appearing on my phone. Everything else restored from iCloud.

My camera roll will not restore from iCloud after updating my iPhone 4 to iOS 6. It shows I have 1.7 gigs of photos stored on camera roll but none are appearing on my phone. Everything else restored from iCloud. When I go to iCloud.com my photostream is not there.

A response I put together from another post. Also going into iTunes and choosing to sync phone to iCloud then back "this computer" sometimes works.
First thing.. Stop where you are. Don't try to sync, update, hard reset, iCloud... Just stop.
Check on your phone under 'SETTINGS' 'GENERAL' USAGE'. It should show some value for PHOTOSTREAM. Also, connect to iTunes and you will notice at the bottom of your phones summary page that there is a large amount of 'OTHER' data.
I used third party software called iExplorer (formerly iPhone explorer). In this program you select 'MEDIA FOLDER', then 'DCIM'. In the various apple folders (IE: 101APPLE) you should be able to preview your photos and copy them to your desktop.
From there sync them back to your device through iTunes or whatever method you use.
There is a simpler solution I'm sure, which may involve using iExplorer to delete some .plist files then restart the phone and let it rebuild. I'm going to try it myself AFTER I've finished copying all the photos to my MAC
Hope this helps.

Slide to unlock after a failed call

When I have a call that fails for some reason and the phone is “locked” it returns to the locked state, with a “call failure” message. All fine.
However, when I later “slide to unlock” the phone (usually after I’ve finished my journey) the iPhone always immediately calls the failed caller back.
I think there is a similar effect with missed calls.
I find this automatic calling without a prompt very irritating. Is there some way to disable this?
Thanks for any info...

First, try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting.
If this does not work, try to set it up as new device, explained here:
How to erase your iOS device and then set it up as a new device or restore it from backups
If still no luck, get it checke by Apple:
iPhone - Contact Support - Apple Support

Camera icon on lock screen is disappeared after playing sound in protect website

Hi, My Q10 does not set password.I turn on Blackberry Protect function, and go to website test play sound part.My phone can receive that and play noise sound.After that, camera on lock screen is disappeared. there is a way to make it appears again: - Set password for phone- do not enter lock screen, press power button to turn off screen- turn on screen , camera icon will appears p/s: hold down K key to enter clock screen will not help, you have to use power buttton

Hi, what do you mean by "does not set password" ? and why are you experimenting with BB Protect... Flagging your device as stolen is a very serious thing (even by mistake)..Please clear few things:What OS you are on right now?..Did you recently upgraded your device software?..have you done the security wipe recently? 1. Set password for phone: Go to settings / Security and privacy / Device password / Set password for your device > scroll down to "Lock device after" option and set device lockout time. 2. do not enter lock screen: by that i think you mean phone is not locking itself,, first go to Settings / Advance Interaction / disable Hold to stay awake.... (i am not sure but you can try this) 3. turn on screen, camera icon will appears: "please provide the complete information"

Do I need to network unlock after updating to iOS 6?

Some people sat that after updating to ios6 they can't connect wifi. Do I need to network unlock my iPod touch? Is it needed? And tell me something about speakers and earphone after updating?

I do not understand your question. Please rephrase it. If English is not your first or native language, please ask your question in your native language so some one can assist you.

Camera icon next to buddy

what does it mean if there is an icon for a camera next to a buddy but it is grayed out?

Hi Dani,
It does normally mean that the other person is busy.
However, in failed chats the person can still appear that they are connected to someone. Normally because they have not closed the Failed chat window.
As you imply they are on a PC I would also ask if they have done the Tuning ?
http://www.panfluteforum.org/ubbthreads/showflat.php?Cat=&Number=563&page=0&view =collapsed&sb=5&o=&fpart=1#563
I would also ask if they are on XP ?
Ralph

4s camera get hang and mobile phone also after updating to ios 8.2

This is the worst issue I'm facing.
I have restarted many times.. forcely closed camera app. but no progress.
Further more we cant downgrade its version.
Plz Do something Apple Staff.

See this article. If restoring doesn't help, there is a hardware failure.
Use iTunes to restore your iOS device to factory settings

I cannot see website icons on my screen in FastDial after updating to v 7.0.1.

Icons in the FastDial browser window are no longer visible / available. I only see the background color. I am able to add to FastDial and open into FastDial, but none are available.
I am using v 3.5b1 FastDial on Firefox 7.0.1. So all should be up to date.

I tried restore backup but it says that itunes could not restore the iPhone 4s because not enough free space is available on the iPhone.. I did it twice but it kept giving me this message. Should I go ahead and restore as new?

My Macbook OS X 10.5.8 app store icon won't appear in doc after update

After following the instructions to update my software, the app store icon will not appear in the doc.

like already posted here you have LEOPARD. But MacAppStore is a feature of SNOW LEOPARD which is a newer OS and must be paid for. The initial version of Snow , 10.6 does not contain it, but once it is updated to 10.6.6 or higher it is included. ( The point release updates are free ).

Why is Camera Raw not reading Nikon d600 files after updating to 7.3

I have updated to ACR 7.3, my Photoshop is version 13.1 x64. However, I still cannot read the RAW files from my Nikon D600 with the message to check if there is an update for my cameras raw files available

Platform: Windows 7 64 bit, i7, 8GB RAM
Camera Raw version is showing as 7.3.0.71
And yep, I have restarted the computer and relaunched Photoshop since doing the update

Camera blurry on front not on back after update

How to fix blurry camera? If using back ok front blurry any ideas?

The front camera will ALWAYS be blurry, no matter what!! If you want to take selfies, try flipping your phone or ipad around so you're facing the back camera. Yes, it'll take 10 extra photos to get it right, but at least it'll be clear! That's what I do.

No camera icon next to "slide to unlock" after update.

Similar Messages

Maybe you are looking for