'no camera is connected',pls help
Hi, until recently, my facetime and photobooth does not work as there's no camera connected or detected. i do not know what to do! i tried re-starting, shutting it down and etc but nothing works. Pls help!!
Thank you everyone.
See all relevant suggestions in http://support.apple.com/kb/HT2090
The proper "reset" suggested there often restores normal function.
(Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD." Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
Message was edited by: EZ Jim
Mac OSX 10.8.3
Similar Messages
-
pls help
agil123 wrote:
wud u not be able to get internet without signing up for data service
Correct, a standard phone service will not provide internet connection. You need to talk with your cellular provider and ask for a data plan for iPads. Not a phone service. -
I used Face time once and then my MAC tells me my camera is no longer connected. Help!
I installed and used Face Time oncem but now when I click on Face time I'm told no camera is connected. Help!
http://support.apple.com/kb/HT2090
-
pls help my iphone 4 was on activation "required". i jailbroke it then it worked but some of the applications were crashing down,won't open. i tried a lot of tutorials and then error message 3194 came out. stucked in recovery mode,and then i use snowbreeze and then it worked!!!! but another problem came, i turned off my iphone then i switched it on again then it stucked in apple logo,.after doing some thing again 1604, 1600 bla bla bla came out..pls help me fix my iphone.
no help for jailbroken phones here-it's not allowed. good luck.
-
i have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar also..,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.
I am seeing if I can get another battery even though I do not believe that is the issue. It keeps giving me vdd_under which I believe is under voltage, maybe it is just a faulty battery? It charges up like normal and functions normal (when plugged in, or above 90%) but it gives under voltage warnings and shuts down when in heavy use (using camera or going back and forth to imessage). When just sitting idle it doesn't seem to turn off until that 55-60% mark. It may just be a faulty battery because I feel I installed all of the other cables correctly when replacing the screen, and I don't think those connections should affect the battery anyway except for maybe the logic board cable (the 2nd cable to be unplugged after the battery cable) I guess I could clean that out as well with isopropyl just in case.
Any other suggestions would be helpful... and I will get back to you if a new battery helps. Thanks! -
i cant update my iphone 3gs to a more newer ios? it says here error! and the phone flashes some connect to itunes.. an if i connct nothing happens.. help me.. the ipgone wont open . and work pls help me thank you!
Hello AlexCornejo,
Thanks for using Apple Support Communities.
The screen you're seeing on your iPhone indicates it is in recovery mode. Now since the device is not appearing in iTunes on your PC, first follow the steps in this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
After following those steps, you should be able to restore your iPhone.
Take care,
Alex H. -
Can anyone help me pls. , I deleted an app on my Ipod Touch, and It was deleted but when I connected my device on my computer and went to iTunes>"apps" , I still saw the app I deleted and it says "install" . Guys, how will I delete it permanently? May you Pls help me. Thanks
Just don't click install
-
my ipod touch just shows the charge symbol on the screen and i checked whether there is a problem in the charger but it works perfectly on my iphone 4 and when my ipod is connected to the computer itunes is not recognising my device pls help me
tmplHi pranoop,
If you are having an issue with your iPod touch not being recognized by iTunes when connected to your Windows computer, I would suggest that you troubleshoot using the steps in this article -
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
while updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Pls, help me , my ipad is disabled as a reult of constant inputing wrong security code by my child on my ipad, i was asked to connect to itunes. The ipad is disabled and cannot do anything to allow me connect to itunes. Pls, What do I do???
This should solve your issue:
http://support.apple.com/kb/HT1212 -
Hi. I would really appreciate if someone could help me find a way to solve my problem. I bought a second hand iphone4 from my friend's friend. I fully trust my friend coz she said this iphone is working but it was handed to her lowbat so i get home i recharge it immediately and after charging it, i open and it shows to select language and country and i did select. After this it shows on the screen "Connect to itunes". Then i plug it in to my laptop and connect to itunes. It shows in my itunes " There is a problem with your iphone". Please visit the Service Answer Center to find answers to all your questions etc. To find your nearest Apple Store pls click here. I know i was so stupid to fully trust and paid before i check the phone. Can anybody pls help me with my problem.
It's probably broken. Is there an error number displayed by iTunes?
-
Hello guys!!Pls help me if someone knows what should I do.my iphone was working perfectly so far but a couple of days ago it stopped charging.its not charging neither with the a/c adaptre nor with the usb through my pc.it says device not recognized..today I had my iphone switched off and tried to see if it was charging and actually it was!but it didnt show that it was actually charging(the battery icon with the bolt didnt appear..but after 3 hours it was fully charged..but this happens only when its awitched off..so i cant connect on itunes and i cant charge it while its turned on!!if someone knows pls help!!!!!!!!!!tnx a lot guys!!!
I actually had the same problem here you just have to change the cable, i dont know exactly why but i think its because when you have your phone swithced of then it doesnt need more electricity so if a little pass then you can charge it for a while and then the iphone will automaticly open again,, so just go an buy a new cable nothing to scared of
-
hi, i installed ios 5 for my iphone 4 and the camera function on lock screen was on the first few days , now it doesn't show the lock screen . is there any change i can do . Pls help me to solve the issue.
nishaadp wrote:
... it stucks with the apple logo , nothing works. Is anything i can do?
See Here for
Frozen or unresponsive iPhone -
How to connect my Inspire 5200 5.1 Speakers to my XBOX? Pls Help!!!
Dear all,
I am in need of dire assistance to connect my Creative Inspire 5200 5.1 Speakers to my XBOX. If possible, I would like to maintain the full 5.1 functionality when watching my movies and playing games (that support 5.1 sound).
What other cables, adaptors, connectors do I need? Pls help... I am really not experienced with TV electronics, wires and stuff.Ok, I did a search & found a post by NsOmNiA930 :
>>>
Or, you could make a custom analog adapter and get fake 5.1.You'll need 2 RCA couplers (or a coupler with 4 RCA Female jacks), a dual RCA to single 1/8 mini jack adapter, a single 1/8 female - 2 /8 male adapter, 2 /8 couplers, and a headphone splitter. It should look like this:RCA from Xbox Dual RCA CouplerRCA to 1/8" adapter(1)Female to (2)Male Adapter(2) 1/8" Coupler on Male ends of previous adapterHeadphone splitter on one of the couplersIMPORTANT! BACK MUST BE BY ITSELF ON THE CORRECT /8" END! CENTER AND FRONT SHOULD BE ON THE HEADPHONE ADAPTER! IN ORDER TO FIND THE CORRECT CHANNEL, DO A 5.1 TEST ON YOUR SPEAKERS AND CONFIGURE APPROPRIATELY!
>>>
Ok, can some kind soul translate that into English? What are all these components(adapter, coupler, headphone jack, 1/8?) What do they look like? -
Hi, I have a power Mac G5 with an airport card, MAc OS X 10.5.8, Wireless card is Airport Extreme ( 0x14E4,0x4E ) and I am having a hard time connecting to my regular NETGEAR router. PLS Help,
Thanks,
MishcadolaI spent 2750 $ for my 24" iMac (price for my region)...
And the perfect world of Steve Jobs still close, but never we've been in there!
Maybe you are looking for
-
Replace function in where clause IN (list)
DECLARE @DNNo NVARCHAR(15), @InvDNNo NVARCHAR(200) SELECT @DNNo='11-0748-DN01', @InvDNNo='11-0748-DN01,11-0748-DN02,11-0748-DN03,11-0748-DN04' Select 1 Where @DNNo IN (''''+ REPLACE(@InvDNNo,',',''',''') + '''' ) It must be worked as per syntax, but
-
My TouchSmart IQ 840t will play audio CD's but will not play a movie DVD?
-
How to reorder Dashboard names
Can some one tell me how to re-order Dashboard names. I know, re-ordering is possible with dashboard pages only. Is there any way to re order Dashboards? Best Reagrds, BTK
-
Master data text deletion-urgent pls
Hello Is there any other way to delete the master data text from the text table other than deleting from SE11 or SE16? the delete option is greyed out in SE16 and SE11. Is there any other way to delete the entries without affecting other objects? Reg
-
Coded UI Test - Data Driven using an XML File
I have done data driven with csv and excel but this is the first time i am trying to do with xml and not able to achieve it. I am using the below to access the xml file, [DataSource("Microsoft.VisualStudio.TestTools.DataSource.XML", "|DataDirectory