No Card Inserted Error

Got a clicker-wheel iPod and it's playback of music is being interrupted by sporadic freezing when the unit goes into some sort of photo download routine and then comes up with error "No Card Inserted". I see there are others out here with this issue, but there seems to be no answers...from the community nor from Apple. Is there a fix posted somewhere that I've not scoured?
And the 5-R's don't do it. I'm on iPod software 3.1.1 (the latest). I've got Photo Import set to OFF on the iPod...why do I even have this dang option since this iPod doesn't even do photo's? Perhaps, APPLE, this is the bug??? Can it be so simple?
Bummed and frustrated in Oakland,
Michael
G4 DA and Pismo Panther and Tiger

I have the same problem, it started right after I plugged into a Logiix charger that a bud had. His ipod is also suffering the same problem. Too bad for me we figured this out later. Have you ever plugged into a non Apple charger?
I also tried reloading an older version to no avail as it gave me the error message when I disconnected the ipod from the computer.
Is there a way to completly clear the ipod hard drive, other than a restore.

Similar Messages

Error: sim card inserted in this iphone does not appear to be supported.

Hi all--
Bought an iPhone 5 off ebay. It's totally wiped, and when I go to activate, I get a "Sim Not Valid" error on the phone, and "sim card inserted in this iphone does not appear to be supported" in iTunes.
It is an AT&T phone, and has an AT&T sim in it. Talked to AT&T, and they said it just needed to be unlocked. I got the seller to go through that process. However, the last step for unlocking is:
1. Open iTunes on your Mac or PC and verify that you have Internet connectivity.
2. Ensure the original SIM card that came with this device is inserted in your iPhone.
3. Connect your iPhone using the dock connector to USB cable that came with your iPhone.
4. Backup and restore your iPhone using iTunes.
I assume ideally, the seller was supposed to still have the phone and complete the unlock himself. But I have the phone and cannot backup and restore because I get the sim error in iTunes which blocks me from doing anything as far as I can tell.
Am I missing a step? Is there any way for me to complete the unlock, or do anything at all to get this phone working even as an iPod, other than sending it back to the seller?
Thanks.
Chris

Then return the phone to the seller and get your money back.
The symptoms you describe are typical of a phone that was hacked or jailbroken to unlock it at some point. Very often after doing so, when the phone is restored, it becomes completely unable to activate even on the carrier it was originally locked to.

THE SIM CARD INSERTED IN THIS IPHONE DOES NOT APPEAR TO BE SUPPORTED.....

Hello. I bought on Dec. 17th 2007 at Orange shop in Beausoleil (south France) an iPhone with the option of unlocking the Sim (100 Euro plus). I followed all instructions. Everything was perfect, on Dec. 24th I was able to unlock the iPhone and used with Orange sim, MonacoTelecom sim and Vodafone sim. BUT the iPhone had a problem: when in sleep mode it did't received calls. So Afer 24 hours I stopped to use, UNSAFE. After Christmas holidays I called Apple assistance, they send me UPS and I returned iPhone to Apple (Jan. 4th 2008). I received a NEW iPhone on Jan. 8th 2008, VERY RUSH. Perfect service, I thought (...making terrible error...). The iPhone was LOCKED and I wasn't able to use. Now starts all the problems and for this reason I'm writing.
I called Apple and Orange many times. Orange didn't received the documents from Apple for the changing of IMEI and Serial, for them I had the first iPhone. After many cals finally I asked Apple to send something official for the changing.
....Days goes on and on.......
Every day two times I called Orange, but evert time I received different versions of my situation. Everyday I tried to restore the iPhone but still simlocked.
On Jan.15th after a meeting with a lawyer I decided to make pression to Apple: infact I returned them an unlocked iPhone and I received back a locked one.
I finally was able to speak with a "supervisor" (Mr. F...) and he tried to solve the problem.
On Jan. 16th I spoke with another "supervisor" (Mr. J...) and he told me to make another time the restore, because they changed the firmware.
From now I tried to make the restore many times with Orange sim. Everything seems to go well but when I put another sim on iTunes there is a white page with:
"THE SIM CARD INSERTED IN THIS IPHONE DOES NOT APPEAR TO BE SUPPORTED. Only compatible SIM cards from a supported Carrier may be used to activate iPhone. Please etc etc....".
So the iphone is locked!!! Maybe is country locked, I don't know.
Incredible, unbelievable.
From Apple they told me to wait someting from US, but until now ..... nothing, I received no news from Apple.
The bad situation is that after more than 30 days after the buy I am not able to use the hardware I bought!
I hope that someone from Apple can read this post (sorry if is so long, but with this details I think that in Apple can understand the problem).
I send in warranty an hardware with certain features that I payed to Apple and I received back it with different features.
That's not serious.
After many days, next week I think to go by legal means if Apple France is'nt able to solve the issue.
Many thanks if someone from Apple read my post.
Many thanks if someone help me.

But who has to make another unlock? Orange told me that for them is ok and the phone is unlocked. I read on other pages that Apple has a world-database with Imei numbers. So seems Apple can also do the unlock, even for the fact that they returned me a locked phone, different from the one I sent them. The warranty is with Apple, I forgot to warite in my first post that first of all on Janauary I went to Orange shop where I bought the iPhone but they told me for every problem is Apple that has to solve.

HP 1315 Photosmart MEMORY CARD IN BACKWARDS message on screen. There is no card inserted.

What are the solutions? I tried unplugging, hold the X button. Nothing seems to reset the card slot. All else is fine. Any help will be appreciated. Thank you. Dennis Chandler

Is this error message on the computer screen or the printer?
Was there a memory card inserted at the time the error appeared?
How is the printer connected to the computer?
What operating system does the computer use?
Does the printer still function or does the error prevent it from functioning?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

SIM card registration error after SW upgrade

Hi
After I upgraded my Nokia 6110 Navigator to SW 4.22 I get insert SIM or SIM card registration error. It happends approx. once a week. Before I upgraded my mobile it never happend. Why?
BR / haav

This is often a problem with the SIM itself. That it started showing just when you did the firmware upgrade could be coincidence.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

N800: no memory card inserted

Hi,
I've acquired a n800 few days ago (through Nokia's website), but yesterday the External slot stopped to be recognized by the N800.
The card used for it work (both on my PC & in the internal slot), but won't be recognized when plugged in the external slot of the n800. I always have the "No memory card inserted".
I did not misused the n800, just played some MP3 and browsed the web.
After this happened I wanted to investigate a little more and installed Xterm. Here is what I have in /etc/fstab:
rootfs / roofs defaults,errors=remount-ro.noatime 0 0
/dev/mmcblk0p1 /media/mmc1 vfat rw,noauto,nodev,noexec,nosuid,utf8,uid=29999 0 0
Where is the other SD slot?
Is it a software problem? or is it hardware?
Another person has the same problem (French forum):
cf. on Maemofr: http://maemofr.org/viewtopic.php?pid=2818#p2818
Thanks
Max

Max, you are not alone.....
I have two Transcend 8GB SDHC Class 6 memory cards installed. BOTH of them have crashed. I'm not sure when but my music disappeared and when I went to CONTROL PANEL then MEMORY it reported no memory cards were installed.
Take out both cards.
REMOVE THE BATTERY for 5 minutes to kill the hardware power.
Replace the battery and reboot the device.
When reboot is over, install the internal card
Install the external card
Open Control Panel
Open Memory in Control Panel
See if it now sees both cards like mine does.
I hope this crash was not normal. I think we have a hardware/OS bug.
My OS2007 is fully upgraded to the latest revision.

HT1937 i unlocked my iphone 4 factory and i upgrade to 6.1 when i connect it to itunes it apears The SIM card inserted in this iPhone does not appear to be supported This iPhone is not currently setup to work with carrier you're attempting to use. Please

i unlocked my iphone 4 factory and i upgrade to 6.1 when i connect it to itunes it apears
The SIM card inserted in this iPhone does not appear to be supported
This iPhone is not currently setup to work with carrier you're attempting to use. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked.

It sounds like you or someone else hacked the phone to unlock it. Updating it locked it to the original carrier.
How did you unlock it? The ONLY legitimate way is to ask the carrier it is locked to to unlock it. Any other way requires hacking or jailbreaking the phone.

Insert error message into session

hi all,
I need to Insert error message into the log of SM35 session.
1. I have created a BDC that creates a session in SM35.
2. The session is scheduled daily and gets executed automatically.
3. there is a scenario where the session should be stopped manually with a error message.
the system doesnt generate any error automatically for that scenario
can any one pls tell me whether its possible to put a manual error into SM35 session log ?
Thanks in Advance,
Santhosini

Hi,
There's a few ways you could do this;
Construct your message first (i.e. combine the message text and variables into one string, then move this into the table)
or
Don't store the text, instead store the message ID, number and variable parts of the message. This has the advantage if you're running a multi-language system the log can be used by users of different languages.
Regards,
Nick

SQL Insert Error Error in allocating a connection. Cause: No PasswordCreden

Friends,
While testing my connection in the Sun java Application Server , I get the following error .
"SQL Insert Error Error in allocating a connection. Cause: No PasswordCredential found "
Can somebody please guide ?
regards
Dhiraj

If you are using Netbeans, then this link might help:
http://forum.java.sun.com/thread.jspa?forumID=136&threadID=598423
Otherwise, have you try this ?
Verify your sun-ejb-jar.xml does not use default-resource-princinpal element:
<res-ref-name>jdbc/pdisasdb</res-ref-name>
<jndi-name>jdbc/pdisasdb</jndi-name>
<default-resource-principal>
<name>myname</name>
<password>geheim</password>
</default-resource-principal>
</resource-ref>

I am getting ORA-20001: Seed insert error while seed translatable text step

Hi,
I am getting this error while English to Arabic translation in the Seed translatable text step
ORA-20001: Seed insert error: WWV_FLOW_ICON_BAR.ICON_IMAGE_ALT ORA-00001: unique constraint (APEX_030200.WWV_FLOW_TRANSLATABLE_TEXT_PK) violated
Can i get any suggetion from your side.
Thanks,
nar

Did you ever figure this out. Because I also have this error.

I updated my Iphone 3gs to 6.1.3 after that I am having this message "Your iPhone could not be activated because the activation server is temporarily unavailable." "The SIM card inserted in this iPhone does not appear to be supported" plz help me! what s

I updated my Iphone 3gs to 6.1.3, after that m having this message:
"Your iPhone could not be activated because the activation server is temporarily unavailable."
"The SIM card inserted in this iPhone does not appear to be supported"
plz help me! what should i do now?

You had a jailbreak and unlock.
When you updated you cooked it.
Your phone is done.
Time for a new one.

Ipad won't connect to itunes with sim card inserted

I have an interesting situation.
I bought a second hand Ipad 32GB WiFi + 3G from a user who was upgrading to the iPad 2. They kept their SIM card and we purchased a replacement SIM card from AT&T's website. (The original SIM card was also from AT&T)
Without the SIM card inserted, the Ipad works perfectly, the same as my other WiFi-only Ipads do. When I insert the SIM card, however, even with the 3G service turned off in settings, Windows & ITunes will no longer even recognize that the Ipad is connected (that's to say powering off the Ipad, installing SIM card, powering Ipad back up and then connecting it w/ the same known working USB Sync cable).
Anyone have any ideas? Right now I'm not even worried about using the 3G, I'd just like to have the SIM card installed so that the 3G can be setup & activated if / when it's needed and we're out and about. Besides not being recognized by the PC, the Ipad w/ SIM card installed works perfectly well on it's own, but (obviously) I'm unable to sync anything to / from it, or back it up in iTunes.
Hoping someone can point me in the direction of something obvious that I've missed.

The only idea/suggestion I have is that you do a reset of your iPad, with the SIM card installed: Press Home + sleep/wake buttons simultaneously until the white Apple logo appears.

Insert error in master-detail form

Probably a stupid question. When I populate the master block of
a master detail form from an LOV, I am asked to save the form.
Since the information is loaded from the LOV, there are no
changes to save. If I answer yes, it gives an Insert error due
to the primary key violation in the master block table. If I
answer no, it opens the detail block and gives the correct
information. The problem is that when I enter information into
the detail block and try to save it, I get the same error
message regarding the primary key violation in the master block.
The form works fine if I do not populate the master block from
the LOV (or from select statements in triggers). Any suggestions
will be appreciated.
LS

Hi,
Check for the form or block status.Looks like the status has
changed.Thats why u r getting the message.If any of the base
table item has changed then u will get such a message.Try
working on this an check it out.
Thanks
Vinod

TS1814 I have an iPhone 3GS and was trying to restore it. Now it won't let me activate my phone and my itunes tells me I have no SIM card inserted when I do. Any ideas on how to get it working again?? I'm dying without it!

I have an iPhone 3GS and was trying to restore it...
Now it won't let me activate my phone and my itunes tells me I have no SIM card inserted when I do.
Any ideas on how to get it working again?

This means that the phone was previously hacked to carrier unlock (unauthorized unlock), and when you restored, the hack was removed and it became re-locked to its original carrier. It will now accept a SIM card only from that carrier.
Your only option is to contact the carrier it's locked to and enquire if they will provide authorized unlocking. Not all carriers will unlock and those that do usually have requirements and qualifications - i.e. you have to be a current or former customer in good standing.

How to fix The SIM card inserted in this iPhone does not appear to be supported. The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation

The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.

Or if you've recently got the phone unlocked then you'll need to connect it to itunes and then do a fresh restore to unlock it ,although for most users simply connecting to itunes for few seconds did the trick.

No Card Inserted Error

Similar Messages

Maybe you are looking for