No carrier after upgrade

my iphone 3gs, factory unlocked, bought in Saudia Arabia has no carrier after upgrading from 4.2.1 to 4.3.2
The baseband is 5.16.02.
Help, Please!

Try restoring your phone from backup again. If there was a problem with the update being properly installed, this should hopefully fix things.

Similar Messages

  • Problem connecting to carrier after upgrading to 5.01

    After upgrading my iPhone 4 to iOS 5.01 I have problems connecting to my carrier.  It may take several hours before the connection is made.  I normally never turn off my phone except when traveling on airplanes and that is exactly when the problem occurs.  After landing I turn on my phone, type in my pin code, and then receive immediately receive "No service".  I try toggling Airplane mode and see a search attempt which ends in "No service".  I try resetting the network and rebooting - does not help.  Low and behold an hour maybe two, maybe three  hours later the carrier connection is made.  Stays connected without any problem until the next time I take a plane.
    Any ideas,  I have not try contacting my carrier because I do not think they are the problem

    IMHO you must be wrong.
    Or how do explain the following facts:
    1.The same application on the same PC can connect to the database when it's started under JRE 1.4.2.
    2.The same application on other PCs in the same network have no problem to connect to the database under JRE 1.5.0_01.

  • No audio hear by 3rd party using carrier after upgrade ios5.1.1

    after i used iCloud upgrade the iOS5.1.1 and I found my iPhone4 got issues on carrier whereby 3rd party unable to hear me at all although I have done all the below before I restore my backup data.
    Reset all data and all setting
    manually restore iOS5.1.1
    reset all network setting
    I also tried to change my sim card from telco company and even we tested to place my sim card on other iPhone4 and proven it is working. Vice versa, we tested to use my friend's sim card on my iPhone and same issues occurred whereby 3rd party can't hear my voice but I can clearly hear them.
    Lastly, I've tested the app of skype and viber to make video call or call, it is working fine but it is not working when I use the carrier call (GSM) to 3rd party.
    I suspect it is iOS5.1.1 issues rather than hardware issues because tested the mice of my iPhone is working perfectly by using the talking toy app.
    Pls. advise who can help me?

    uncheck the "Wait for Far End" option. Also, check and see what codec is coming across on the local AND Remote phone (if possible...I know the remote is a station on the key system, so I don't exactly know how to check that unit...) and see if it is actually coming across as a G711 and NOT a G729, which needs a transcoder, as you know...
    I ran into this problem and did some manipulation with IOS transcoders through the call legs to get it to process correctly.

  • IOS 6 Facetime not connecting after upgrade in UAE It was before on an Ipad purchased in Uk, I am miserable, I know its the carrier Etisalat, I sincerely some one finds a fix for this.

    OS 6 Facetime not connecting after upgrade in UAE It was before on an Ipad purchased in Uk, I am miserable, I know its the carrier Etisalat, I sincerely some one finds a fix for this help.

    I attempted to uninstall QT and reinstall- the QT 7.4 installer failed to install (it said a more up to date version was present, even though I'd trashed the old one). I downloaded and reinstalled 7.5 but itunes still did not work.
    While my solution wasn't ideal
    1) It was what Apple told me to do!
    2) It seemed preferable to A) A complete system reinstall, B) removing 264 .plist files one at a time, rebooting, and seeing which one was causing the problem.
    I still have the old .plist files in another folder, and can replace them in my preferences folder if I decide I need them. Most apps will create a new .plist file on start-up if there is not one present, so unless it is a program where I have gone to great lengths to change preferences from default, I'm guessing I will not notice much difference (and if I do, I can always go to my archive of .plists, or on Time Machine for that matter...)

  • Login Error after Upgrading from BW 3.5 to BI 7.0

    Hi Experts,
    We have carried out an upgrade from BW 3.5 to BI 7.0.
    After Upgrade we are not able to login using SAP GUI. we are getting an error saying..
    Username or Password not Valid..
    During the upgrade (in Netweaver 2004s ) is there procedure necessary to be followed, which we could have missed..
    Your response will be greatly appreciated.
    Regards
    LRaghunahth

    Hi
    Thanks a lot for your reponse.
    Basically I am able to login thru sap* / ddic and can unlock the users / reset the password.
    But the customer wants to know why the user is getting locked and it happened because of any procedure miss whil performing the upgrade..
    if it is usual that users get locked during upgrade, any SAP Notes to refer..
    Thanks a lot for helping in this community.
    Best Regards
    L Raghunahth

  • IMac is running slow again after upgrading Memory to 6 GB 800 MHz DDR2 SDRAM.  Mail is especially slow.  I have searched the community info, but I am really a novice and most of the solutions appear to be beyond my level of proficiency. Please help!

    I am at a loss. even after reading other questions and responses.  After upgrading to Mt. Lion, everything on my iMac slowed down.  I knew more memory would be needed, so I went from 2G to 6G.  That worked for awhile, but now, about 3 weeks later, things are slowing down again.  Mail is especially slow, when moving from one message to another, and also just plain typing is delayed in mail.  iPhoto has had the spinning wheel issue since change to Mt. Lion, but it eventually stops and the app itself is functional, so this is just annoying as much as anything.
    Any easy, simple to follow instructions would be appreciated.  Is it better for a novice to take to the Genius Bar or to an approved Mac repair center in my area, rather than attempt some of the solutions I've seen offered here.  And, if I do, what's the likelihood the issues will be resolvable?? Clearly, I am not the only one with this issue ...
    Thanks for any help you can offer.

    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
    Otherwise, take the steps below when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 2
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • Ipohone 4 hotspot not working after upgrading to ios7.1 ?

    my ipohone 4 hotspot not working after upgrading to ios7.1 but my some friends having iphone 4s its works fine and those having iphone 4 it's not working although we all have same operator and same operating system (i.e ios 7.1).I think this is problem only  with iphone 4 users with ios 7.1 , so apple plz fix it in ur next update.

    You don't like the answer?
    Again it's not a bug, use a supported carrier if you want Personal Hotspot.
    Read the list one more time, if carrier is not on the list, IOS7.1 patch the loophole.
    Message was edited by: ckuan

  • Trackpad handwriting problem after upgrade to 10.7.4

    Hi,
    After upgrade to OS X 10.7.4, I have problem on Chinese handwriting using trackpad on my MBA.
    When I press Shift-control-space the handwriting window pop-up.
    I am able to hand write and choose characters in the pop up window.
    But, the result does not beibg carried back in the Finder or Safari, or even Word 2008.
    Please, Can any body help?
    Martin Sit

    It is just 10.7.4
    People are handing out advice to use the terminal as root and clean up the 10.7.4 mess, and I would advise against EVER using terminal unless you are a UNIX Geek like me. There is a reason OSX is a GUI based Operating System - You should never have to use it like a Green Letters on Black Screen computer.... Although that is what we are using, just with pretty graphics and buttons to click instead of typing code and script...
    10.7.4 is a major fail.
    I have never seen a release that has negatively affected every Apple User I know - From Mac Pro Intel V.1 to my December 2011 MBP, and everything in between.
    No one should be trouble-shooting an OS that has so many random, bizzare, and fatal errors across dozens of systems?
    Did Sandboxing KILL the Mac?
    Nothing you do will fix this - Apple needs to fix this. Like you, I have made the MBP usable, but other than that, any system message kills the MBP - first the display, then the HDD, then preferences, then finder....

  • Double MMS sending after upgrade to OS 3.0

    Hi Guys,
    After upgrading OS of my phone to 3.0 i am not able to send MMS properly. When i submit new mms it is arriving to destination 2 times and i am getting delivery failure response. Is there anybody who has this problem?
    p.s: i collected tcp dump information taken from mms center of gsm operator, it is clear that iphone is submitting this mms message 2 times.
    Thanks,
    Message was edited by: azizo

    When you say 2nd generation iPhone, you mean the 3G?
    The reason I ask is because MMS is not supported with firmware update 3.0 with the first generation iPhone.
    When Apple announced the release of firmware update 3.0 at their WWDC, all carriers for the iPhone in all countries were not going to have MMS available for the iPhone when 3.0 was released. AT&T in the U.S. was one of the carriers not ready. AT&T will have MMS available for the iPhone sometime this summer.
    Have you checked with your carrier for the iPhone to see if they have MMS enabled for the 3G & 3GS?

  • IPhone won't sync after upgrading to Leopard

    My iPhone won't sync, or even show up in iTunes, after upgrading to Leopard. I've tried restarting my Macbook Pro, trying different USB slots, closing and reopening iTunes, everything. Has anyone else had this problem??
    I've tried everything apple suggests:
    1. The iPhone battery might need to be recharged. For information about charging iPhone, see "Charging the Battery" in the iPhone User's Guide.
    2. If that doesn't work, disconnect other USB devices from your computer and connect iPhone to a different USB 2.0 port on your computer (not on your keyboard).
    3. If that doesn't work, turn iPhone off and turn it on again. Press and hold the Sleep/Wake button on top of iPhone for a few seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
    Note: If you enter the PIN incorrectly three times, you may need to contact your carrier for a Personal Unlocking Key (PUK) to enable your SIM card again.
    4. If that doesn't work, restart your computer and reconnect iPhone to your computer.
    5. If that doesn't work, download and install (or reinstall) the latest version of iTunes from www.apple.com/itunes.

    You might need to remove and reinstall the Apple Mobile Device Service. Follow the link below for info on how to do this.
    http://docs.info.apple.com/article.html?artnum=306637

  • After upgrading to mountain lion my mac is very slow?

    Hello
    After upgrading to mountain lion my mac is very slow
    It was starting in 10 seconds and shuting dow in 5 seconds and now it's taking more than one minute to start it or shut down it and everything is slow
    why????????/
    Thanks

    First, back up all data immediately, as your boot drive might be failing.
    Take these steps when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 2
    You must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into a message.
    Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

  • I am using Iphone 4 (not 4s) After upgrading to ios 5.0.1. is blocking. I live in Venezuela

    I am using Iphone 4 (not 4s) After upgrading to ios 5.0.1. is blocking. I live in Venezuela

    Without more information, I have to say it sounds like the phone you have was not legitimately unlocked, but had been hacked. Updating iOS will re-lock it to the original carrier.
    ONLY the carrier it is locked to can authorize unlocking it.
    Where did you get the phone?

  • HT1695 how do i activate my iphone 4 after upgrading to ioS 5.1

    how do i activate my iphone 4 after upgrading to ioS 5.1

    I'm not sure I understand what you're asking, but I'll try to answer!    You can either connect to iTunes and set up and activate there, or you can also use the setup assistant to set up your iPhone.  As far as carrier activation, you'll have to follow the protocol that your carrier uses.  Either switch SIM card, or call the number they use to allow device activation.  Is that what you were wanting to know?

  • Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

    There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
    I can not believe that Apple did not test this for major bugs like this one is.
    I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
    I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

    I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
    I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
    I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

  • Reception problems with iPhone 3GS after upgrading to iOS 4.2.1

    AFter upgrading to 4.2.1, my 3GS iPhone is experiencing bad signal, bad quality and frequent disconnections.
    This was repeated even after my provider replaced my device to a different 3GS device, running 4.2.1.
    inserting my SIM card to a NOKIA phone, showed strong signal and good reception.
    Did anyone experience reception problems on 3GS running 4.2.1??
    Thanks,

    I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
    I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
    I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

Maybe you are looking for