No CC Programs show in the list of defaults for file associations

I have CC 2014 Photoshop, Bridge and Lightroom. None of these programs show as available for associating files such as .jpg. Even if I navigate to Photoshop.exe and select it, it does not associate.
up to a few days ago if I clicked on a .jpg it would open in Photoshop. Now it does not...
An adobe agent got access to my PC and could do nothing except direct me to ask Microsoft for a fix even though ONLY CC programs are affected!!
Any ideas?
John

Check that your Windows Registry keys for Photoshop.exe shell commands edit and open are set correctly.  Sometime they get messed up. I think uninstalling a prior release of Photoshop that the Adobe un-install process maybe doing the damage. I stopped uninstall old release  of Photoshop years ago.  I just delete their install trees on my disk  to revover disk space and remove their uninstall entries in the registry.

Similar Messages

  • When I login to Horizon View, it shows me the list of desktops to connect to. If I'm entitled to only one desktop then can View auto connect me to that desktop instead of me clicking on Connect?

    When I login to Horizon View, it shows me the list of desktops to connect to. If I'm entitled to only one desktop then can View auto connect me to that desktop instead of me clicking on Connect.

    Yes you certainly can.
    Right click any desktop in the list > Settings > in the left pane select the desktop you want to auto connect to > check "Auto connect to this desktop".

  • I am trying to use the locate my macbook that was stolen. How do I know if it is set up on the service. It shows on the list but just says it is offline and doesn't say when or where it last was. I am trying to either locate it or erase it. HELP

    I am trying to use the locate my macbook that was stolen. How do I know if it is set up on the service. It shows on the list but just says it is offline and doesn't say when or where it last was. I am trying to either locate it or erase it. HELP

    Since you can see it in your device list it must have Find My Mac activated, but you're going to have to wait for them to take it online in order to either locate, lock or wipe it. Until it goes online you can't do anything. http://www.apple.com/support/icloud/find-my-device/
    iCloud: Locate your device

  • HT201269 hi i need help, i just go a new iPhone 5 and i want to put all my backed up stuff on, but it doesn't show on the list, how do i get all my stuff back and yes i did backup the old phone

    hi i need help, i just go a new iPhone 5 and i want to put all my backed up stuff on, but it doesn't show on the list, how do i get all my stuff back and yes i did backup the old phone

    Follow the explicit instructions in the article from which the thread was started and restore the device from the backup of the previous device.

  • ITunes Does Not Appear in the List of Default Programs?

    My wife is trying to get iTunes to be her default media player, using the instructions found at this link: http://support.apple.com/kb/HT3202.
    However, when she goes to the list of default programs, following steps 1 and 2 at that link, iTunes does not appear in the list.
    How can we correct this?
    Thanks very much in advance for any info.

    Vik-
    I was having this same problem. I understood how to change the default program but like yours my iTunes was not in the list so therefore I was unable to set it to default.
    This worked for me: (I have Vista)
    I checked for updates on my iTunes program and there was an overdue update. I installed and restarted iTunes. Then went to my Default Programs tab and followed the instructions just as described in the support material and after my installation of the newest update my iTunes was now listed in the lineup of available default programs.
    I hope this works for you as well!
    Thanks and good luck!

  • Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restod

    Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restored network settings to no avail. Any ideas?

    What's more, they don't even show on the bluetooth devices list..

  • Report to view the list of materilas for which 105 has not been done

    Hello Everyone
    I want to to view the report which can show me the list of pending GR (105 to take the material into unrestricted use) that has to be done aganist the 103.
    Thanks in Advance
    Sachin

    Hi,
    Use T.Code:MB51 and try with 103 movements type and get the report .
    Also try in MMBE, M.C9 T.code
    Hope helpful to you.
    Regards,
    Biju K

  • I downloaded FF 4 and now 5 and with neither my screen looks nothing like it shows on the FF page. For instance, I do not have the orange FF tab in the upper left corner, I have no option of "pin as app" nor do I have Panorama. Can someone please help me?

    I downloaded FF 4 and now 5 and with neither my screen looks nothing like it shows on the FF page. For instance, I do not have the orange FF tab in the upper left corner, I have no option of "pin as app" nor do I have Panorama. Can someone please help me?

    To get the orange FF tab, go to View > Toolbars > Menu Bar. This should uncheck the menu bar and give you the orange button.
    Panorama is a box made of 4 grey rectangles that should be on the far right, if it isn't after you enable the orange FF tab, right click on anywhere on a tool bar that doesn't have anything on it, and you should get a menu with a list of your tool bars that you can check and uncheck. go down to customize at the very bottom and it will open a window with all your buttons. Find the panorama/tab groups button and drag it onto the tool bar of your choice.
    to pin a tab as an app, right click on it; it's an option in the right-click menu.

  • How to get the list of values for a dynamic parameter using Web Services SDK?

    <p>I am struggling to get the list of values for a dynamic parameter of a report.</p><p>I am using Java Web Services SDK ... I tried to use PromptInfo.getLOV().getValues() method but it does not work.</p><p>First of all ... is this possible (to get the list of values for a dynamic param) using Web Services?</p><p>Second of all, if this is possible, how should I do it ... it seems it works fine when running the report from CMC. It asks for DB logon info and after that it provides a list of values.</p><p>Thx </p>

    <p>Your assumption is correct. We are trying to get the LOVs from the Crystal Report. I was not aware that this is not supported by Web Services SDK.</p><p>We used Web Services SDK to integrated the Crystal Reports in our web application. We implemented some basic actions for reports: schedule, view instances, run ad-hoc reports.</p><p>We encountered this problem when trying to run/schedule reports with dynamic parameters (a list of values from DB). We were unable to get the LOVs.</p><p>Please let me know if you can think of an alternative to look at.</p><p>Thanks a lot,</p><p>Catalin </p>

  • Is there a way to change the order of the listing on Hub for Z 10?

    Is there a way to move the order the listing is set for the Hub on Z 10?

    I've messed around with my Hub settings for a while and I don't see any way of changing the order so I'm pretty sure it can't be done.  That's just a guess but I make pretty good guesses. 
    Cheers. 
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • Problem in the BDC program to upload the data from a flat file.

    Hi,
    I am required to write a BDC program to upload the data from a flat file. The conditions are as mentioned below:-
    1) Selection Screen will be prompted to user and user needs to provide:- File Path on presentation server (with F4 help for this obligatory parameter) and File Separator e.g. @,#,$,%,... etc(fields in the file will be separated by using this special character) or fields may be separated by tab(tab delimited).
    2) Finally after the data is uploaded, following messages need to be displayed:-
    a) Total Number of records successfully uploaded.
    b) Session Name
    c) Number of Sessions created.
    Problem is when each record is fetched from flat file, the record needs to be split into individual fields separated by delimiter or in case tab separated, then proceeding in usual manner.
    It would be great if you provide me either the logic, pseudocode, or sample code for this BDC program.
    Thanks,

    Here is an example program,  if you require the delimitor to be a TAB, then enter TAB on the selection screen, if you require the delimitor to be a comma, slash, pipe, whatever, then simply enter that value.  This example is simply the uploading of the file, not the BDC, I assume that you know what to do once you have the data into the internal table.
    REPORT zrich_0001.
    TYPES: BEGIN OF ttab,
            rec TYPE string,
           END OF ttab.
    TYPES: BEGIN OF tdat,
           fld1(10) TYPE c,
           fld2(10) TYPE c,
           fld3(10) TYPE c,
           fld4(10) TYPE c,
           END OF tdat.
    DATA: itab TYPE TABLE OF ttab.
    data: xtab like line of itab.
    DATA: idat TYPE TABLE OF tdat.
    data: xdat like line of idat.
    DATA: file_str TYPE string.
    DATA: delimitor TYPE string.
    PARAMETERS: p_file TYPE localfile.
    PARAMETERS: p_del(5) TYPE c.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
      DATA: ifiletab TYPE filetable.
      DATA: xfiletab LIKE LINE OF ifiletab.
      DATA: rc TYPE i.
      CALL METHOD cl_gui_frontend_services=>file_open_dialog
        CHANGING
          file_table = ifiletab
          rc         = rc.
      READ TABLE ifiletab INTO xfiletab INDEX 1.
      IF sy-subrc = 0.
        p_file = xfiletab-filename.
      ENDIF.
    START-OF-SELECTION.
      TRANSLATE p_del TO UPPER CASE.
      CASE p_del.
        WHEN 'TAB'.
          delimitor = cl_abap_char_utilities=>horizontal_tab.
        WHEN others.
          delimitor = p_del.
      ENDCASE.
      file_str = p_file.
      CALL METHOD cl_gui_frontend_services=>gui_upload
        EXPORTING
          filename = file_str
        CHANGING
          data_tab = itab.
      LOOP AT itab into xtab.
        CLEAR xdat.
        SPLIT xtab-rec AT delimitor INTO xdat-fld1
                                         xdat-fld2
                                         xdat-fld3
                                         xdat-fld4.
        APPEND xdat to idat.
      ENDLOOP.
      LOOP AT idat into xdat.
        WRITE:/ xdat-fld1, xdat-fld2, xdat-fld3, xdat-fld4.
      ENDLOOP.
    Regards,
    Rich Heilman

  • The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:  "Extensions may not function properly because it does not meet the dependency conditio

    The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:
    "Extensions may not function properly because it does not meet the dependency condition."
    OR
    Extension Status is not consistent with extension set configuration."
    The reason I opened the Extension Manager in the first place was to check to see if I had installed a third party extension.  And I was presented with these warning symbols.  I haven't added anything, I haven't done anything that would cause this.
    Does anyone know how to fix this???
    I am running OSX 10.9.5; Indesign CS6 version 8.0.2 And Adobe Extension Manager version  6.0.8.28.
    Thanks in advance!
    Nina

    Many InDesign pre-installed extensions (Those extensions you have immediately after InDesign installation) define dependency rules in their mxi files. Dependency means that one extension works well only if one or more other extensions are installed and enabled. If this condition is not met, the yellow triangle warning will be shown.
    You can select an extension with warning, click "Advanced" tag page in the lower right panel. You will see "This extension has dependency on: <extension name> ...". Check whether every extensions listed here are available and enabled. If not, enable them. Repeat these steps for all the extensions which have warning.

  • Report for the List of Vendor for which no Purchase order has been created

    Hi ALL
    Please let me know if there is any Report for the List of Vendor for which no Purchase order has been created
    regards,

    Hi Prateksha Vaid ,
    Go to transaction S_ALR_87012093
    Select accounts with no purchases checkbox and execute
    Diwakar
    reward if useful

  • Why Georgia isn't on the listing of countries for payment ?

    Hello,
    Why Georgia isn't on the listing of countries for payment ?
    And how I can register my AmEx(Bank of Georgia) cart with georgian billing address?
    Thank you in advance,
    Regards,
    Message was edited by: badri sepashvili

    Thank you,
    You are right of course, but, unfortunately I can't ask about this situation to Apple employees.
    There is no live chat, here is only support communities on Apple's site.
    I would like to know it's a problem of georgian banks or Apple's business strategy ?
    Regards

  • Hello i buy itunes card and i have 12 but i can not buy the jewels of the game hay day when i try show me the message contact itunes for support your purchase could not be completed

    hello i buy itunes card and i have 12 but i can not buy the jewels of the game hay day when i try show me the message contact itunes for support <<your purchase could not be completed >> what can i do

    You will need to do what it says, contact iTunes Support. These are user-to-user support forums, if you thought you were contacting Apple by posting here. Go here:
    http://www.apple.com/emea/support/itunes/contact.html
    to contact the iTunes Store.
    Regards.

Maybe you are looking for