"No CD drives were found"

Hi!
I'm trying to install arch for the first time, but I get an error during the installation. The error happens at step 2: "Select Packages". I choose to install the packages from an Arch Linux CD and then the installer tells me that "No CD drives were found". Why?
I googled a bit and tried to write "arch ide-legacy" when I boot, but it makes no difference. The CD drive is IDE by the way.
Anyone?
Oh, and remember the little spoon please. I'm not an experienced linux user...

What release are you trying to install?
Maybe one of the following boot options helps:
arch all-generic-ide irqpoll
or
arch all-generic-ide irqpoll pci=nommconf

Similar Messages

Windows 7 Installation problem: "no drives were found, click to load driver..."

I just purchased a Toshiba Satellite laptop (U945-S4140) that came with windows 8. I am trying to install windows 7 enterprise 64 bit.
I have the installation file on a bootable USB stick. In order to boot from the USB, I have to go into the BIOS settings and change from UEFI to CSM boot mode. Then the computer will boot from the usb stick and the windows 7 installation begins to work fine.
However, I soon get an error message that "no drives were found. click to load driver to provide a mass storage driver for installation."
I cannot figure out how to proceed. Any help would be greatly appreciated.
Cheers

I have tried many solutions....Maybe I should provide more details on my options.
Through my university I am granted the rights & license to use a copy on windows enterprise. From them I obtained a valid product key and also downloaded an ISO install file. It seems as if this file was designed to be burned to a dvd. I used windows 7 usb/dvd tool to burn the ISO file to a DVD. No problem there. However, my new laptop does not have an optical drive. So, I borrowed an external one that plugs in via USB. Again, in order to get ANYTHING to happen, I need to boot the USB(dvd rive) in CSM mode. Even then, it doesn't work. (I'm sorry but I forget the specific error I got here.....there have been so many methods and so many errors today)
Now, with this DVD, I have had a little bit of progress if I click the setup.exe file while Windows 8 is running. It begins the Windows 7 setup program, and even sees the harddrive! It asks me what partition I want to install to, and I selected the only 1 (of 4) that it said was 'available' to write to. Then, it loaded the installation files, but when it went to automatically restart, it froze during the 'starting windows' screen just as the little colored circles appear, that eventually form the windows logo. Again, I think the problem here might have been that during the restart, it looked to the USB-DVD drive, which needs CSM mode to boot properly, but Windows 8 can only start in UEFI mode.
Any attempt to put this ISO file onto a USB stick have not worked well. I used Rufus and the only thing that slightly worked was burning the ISO to the USB stick with a 'GPT partition scheme for UEFI controller' with the 'FAT32' file system. When using this to boot, I did not have to change the BIOS to CSM mode. The screen for 'loading files' came up like the installer was going to work. However, the computer then froze during the 'Starting Windows' screen, however, this time the little circles actually were able to form the windows logo. But, at that point I was left with a pulsing windows logo and it was stuck. It did not even make it to the actual installer.
The situation I posted about originally is slightly different. Some tech guys at my department's electronic shop have a bootable USB stick with the windows 7 enterprise installation software already on it. I used that and was at least able to get a little bit into the windows 7 setup before it told me it cannot find a disk to install to (as in my original post).

Windows 7 Installation problem: "no drives were found, click to load driver to provide a mass storage driver..."

I just purchased a Toshiba Satellite laptop (U945-S4140) that came with windows 8. I am trying to install windows 7 enterprise 64 bit.
I have the installation file on a bootable USB stick. In order to boot from the USB, I have to go into the BIOS settings and change from UEFI to CSM boot mode. Then the computer will boot from the usb stick and the windows 7 installation begins to work fine.
However, I soon get an error message that "no drives were found. click to load driver to provide a mass storage driver for installation."
I cannot figure out how to proceed. Any help would be greatly appreciated.
Cheers

Hello Maxxpower33, thank you for your words.
I looked through the error logs that could be generated from the tool and found this one which may be what you experienced. Kindly let me know if this is what you got:
"Files copied successfully. However, we were unable to run bootsect to make the USB device bootable. If you need assistance with bootsect, please click the "Online Help" link above for more information."
Some further information is that I found this post where another user experienced the same error on a laptop, although the speculation mentioned in the post is that the user does not have a Windows store account under which he purchased the license for Windows
7 Home Premium, which is the flavor he was trying to get on the bootable drive. However, this does not seem to be a valid response due to the fact that the tool does not check Windows XAuthCert Servers for validation on licensing. So ignore that
portion of the post, but the 2nd post helps a bit by linking to another article, providing both below.
Forum Port With Same Error
Article with 4 methods to create
a bootable Windows 7 USB Drive
In that first post, further down, is another reply to a tool that I have not tested with. So please use caution on this one as I cannot find very much feedback other than on their own website, but sounds much like the first tool I mentioned in my first
post "Unetbootin", but this one is called Rufus, and two people did mention they had good success with this tool after having difficulties with the Windows utility.
Rufus
After all that is said and done, there is not 1 tool that will work for everyone all of the time on every environment. Why? I would like to know also...but speculate hardware/firmware/bios combinations could be the culprit. One of these
tools should work for you and it would be my recommendation to try them in this order (skipping what you've already tried):
1) Windows 7 USB/DVD Download Tool
2) Unetbootin
3) Manually creating the partition and xcopy'ing the extracted ISO to it
4) Rufus
5) Borrow a PC with a DVD-R in it and burn the ISO to a disc and install from it. If your laptop does not have a DVD drive, an external drive can be purchased for roughly $25 or less. Or if you have an internal drive laying around, buy an enclosure
for about $15 and put the drive inside there and attach it to your laptop via USB or eSATA.
As always, my advice is nothing more than my opinion, which are like bungholes...everyone has one and they all stink! LOL!
John Fester

Mac Pro - Bootcamp Windows 7 x64 problem. No Drives were found. Please help

Hi,
I have recently purchase a Mac Pro and I was trying to install windows 7 with bootcamp which i successfully done it on my imac before but somehow after I partition my HDD in bootcamp, inside winodws 7 install page it saids "No drives were found. Click Load Driver to provide a mass storage driver for installtion"
I have read some previous post but I didn't really get it how people have solved. I have dismount the other 2 HDD but it doesn't seems to work.
Can someone please help. Is there a way that I can have my windows 7 into my other HDD instead of the Mac OS drives.

You read the PDF Guide? You have to use Advanced Options to format the FAT volume (BOOTCAMP) to NTFS.
And yes, pull other drives.
Personally, I use a separate hard drive for Windows 7 and just pull the others, boot from Windows DVD and install.
I assume your recent MacPro 5,1 is Mid 2010. If you want to use more than 4GB RAM you will want 64-bit, and if you have dual processor 8 or 12-cores, you'd need Windows 7 Pro.
As for where you are now, use Boot CAmp Assistant again to remove the partition on your Mac OS boot drive.
Backup Mac OS to another drive yet? I use SuperDuper or CCC.
You can format the intended drive in Disk Utility.
Use Partition tab, Options and change partition table from GUID to Master Boot Record and format the entire drive as FAT. Or use Boot CAmp Assistant to do so. You'll need to shutdown then, not restart, so you can pull your other drives.
http://www.apple.com/support/bootcamp/
http://support.apple.com/kb/HT3777

Trying to install Windows 7 - no device drivers were found

On top, i sorry for my bad english.
I have a trouble. Actually i have on my HP notebook ( H0W28EA ) SUSE Linux Enterprise Desktop. But i want install Windows 7. I put pendrive to my notebook, boot, and... error : No device driver were found. I don't have DVD/CD with drivers with my notebook.. I don't understand which drivers i must download. Help me. TIA
This question was solved.
View Solution.

Chance in bios the setting to Legacy,(becose standert he only see,s the drivers for install windows 8.
then set first to boot,Flash or cd/dvd
I have changed it and it works
becose you are using an previus windows os,also you can install then xp or Vista,what you want.
probably your pc/laptop is standard sold with windows 8, and microsoft don,t want that you go back to downgrade,
becose the have with windows 8 and later 10 more checking controll over your pc when you install illegal software.
sorry fore my English,i am Dutch.
Greets gerardw

Seagate external drive: Partition map check failed because no slices were found

I have a 3TB Seagate Expansion external backup drive connected to my Retina Macbook Pro via USB. The disk will not eject from a regular Finder window - it will only eject from Disk Utility. Backups seem to otherwise be running fine. I tried to verify/repair the disk in Disk Utility, and I got the following error: "Partition map check failed because no slices were found." I am able to verify/repair the partition without any problem, and no errors are found.
I'm concerned about relying on a backup drive that may be heading south. Here is the output from diskutil info:
diskutil info disk3
   Device Identifier:        disk3
   Device Node:              /dev/disk3
   Part of Whole:            disk3
   Device / Media Name:      Seagate Expansion Desk Media
   Volume Name:              Not applicable (no file system)
   Mounted:                  Not applicable (no file system)
   File System:              None
   Content (IOContent):      GUID_partition_scheme
   OS Can Be Installed:      No
   Media Type:               Generic
   Protocol:                 USB
   SMART Status:             Not Supported
   Total Size:               3.0 TB (3000592977920 Bytes) (exactly 5860533160 512-Byte-Units)
   Volume Free Space:        Not applicable (no file system)
   Device Block Size:        4096 Bytes
   Read-Only Media:          No
   Read-Only Volume:         Not applicable (no file system)
   Ejectable:                Yes
   Whole:                    Yes
   Internal:                 No
   OS 9 Drivers:             No
   Low Level Format:         Not supported

@ Allan Eckert: Unfortunately, reformatting is out of the question, I have 5 years of work on this!
@ Loner T: Yes, the firmware did successfully upgrade after router reboot and a bit of troubleshoot.
Thanks for the quick replies. Keep 'em coming!

External drive error, does not mount: "Partition map check failed because no slices were found"

Hardware: MacBook late 2009 (2.26Ghz Core 2 Duo 2 GB RAM 250GB HDD) running 10.9.4, Hackintosh MacPro (3.29Ghz i3 16GB RAM 1TB HDD) running 10.9.4, external 3 TB Seagate Backup+ drive
As you can can see from the screenshot below,
The external drive was initially plugged in a Netgear WNDR4500 router by USB to be used as NAS. I was in the middle of updating the firmware when there was a power outage. Upon reboot, the drive no longer mounts, whatever it is plugged in (router, Mac, PC, etc.).
I ran DiskUtility on the partition map and volume, same errors. Here's an what I see:
As you can see above, the "Mount" icon is greyed out and I get the error message "Partition map check failed because no slices were found". If I select "the Archive" partition, the "Mount" icon is not greyed out but clicking it doesn't do anything. My HDD is basically unreadable.
I issued a few Terminal commands to see what was the problem, here are the results:
What can I do?
Currently running analysis on TestDisk and it is 50% after 48hrs. Need some help!

@ Allan Eckert: Unfortunately, reformatting is out of the question, I have 5 years of work on this!
@ Loner T: Yes, the firmware did successfully upgrade after router reboot and a bit of troubleshoot.
Thanks for the quick replies. Keep 'em coming!

I have an alert message in disc utility. Error: storage system verify or repair failed. Problems were found with the partitian map which might prevent booting.

While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

Weblogic Portal: Error While Deploying: VALIDATION PROBLEMS WERE FOUND

Hello friends
I am getting following error while deploying EAR on server.
“Module named 'MyEAR' failed to deploy. See Error Log view for more detail.”
Steps I followed:
1: Created one portal domain successfully and was able to start the serve after thatr.
2: Created one Portal EAR Project and added it on server.
Now when I am restarting the server, getting following error/log
**“weblogic.management.DeploymentException: VALIDATION PROBLEMS WERE FOUND**
**problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>”**
Exception stack Trace:
java.lang.Exception: Exception received from deployment driver. See Error Log view for more detail.
at oracle.eclipse.tools.weblogic.server.internal.WlsJ2EEDeploymentHelper$DeploymentProgressListener.watch(WlsJ2EEDeploymentHelper.java:1566)
at oracle.eclipse.tools.weblogic.server.internal.WlsJ2EEDeploymentHelper.deploy(WlsJ2EEDeploymentHelper.java:470)
at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publishWeblogicModules(WeblogicServerBehaviour.java:1346)
at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publishToServer(WeblogicServerBehaviour.java:803)
at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publishOnce(WeblogicServerBehaviour.java:623)
at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publish(WeblogicServerBehaviour.java:516)
at org.eclipse.wst.server.core.model.ServerBehaviourDelegate.publish(ServerBehaviourDelegate.java:708)
at org.eclipse.wst.server.core.internal.Server.publishImpl(Server.java:2690)
at org.eclipse.wst.server.core.internal.Server$PublishJob.run(Server.java:272)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
Caused by: weblogic.management.DeploymentException: VALIDATION PROBLEMS WERE FOUND
problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>
at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:193)
at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48)
at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110)
at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76)
at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:88)
at weblogic.management.deploy.internal.MBeanConverter.createApplicationForAppDeployment(MBeanConverter.java:66)
at weblogic.management.deploy.internal.MBeanConverter.setupNew81MBean(MBeanConverter.java:314)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.compatibilityProcessor(ActivateOperation.java:81)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.setupPrepare(AbstractOperation.java:295)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:97)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: weblogic.descriptor.DescriptorException: VALIDATION PROBLEMS WERE FOUND
problem: cvc-complex-type.2.4c: Expected element 'module@http://java.sun.com/xml/ns/javaee' before the end of the content in element application@http://java.sun.com/xml/ns/javaee:<null>
at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:245)
at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:231)
at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:155)
at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:323)
at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:788)
at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:409)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:759)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:768)
at weblogic.application.ApplicationDescriptor.getApplicationDescriptor(ApplicationDescriptor.java:301)
at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:178)
as it is ‘brand new ‘ – IDE generated application, weblogic-application.xml is untouched.
Thanks & Regards

I have seen this problem also. To be clear, this occurs straight out of the box. In other words - launch eclipse, create a new workspace, create a new portal EAR project with the wizard, and then try to deploy it without touching anything. In fact, try changing the portal's facets to anything, plain EAR, 11g default, Portal EAR - it doesn't matter. It will not deploy. Either you get this error or you get deployment errors complaining about missing library references in the weblogic-application.xml. Then - you have to do surgery just to get an 'out of the box' portal to run. Very frustrating.

No FireWire ports were found on MacBook Pro 15.4" running Mac OS 10.6.4

Hello all,
I recently bought a Mac Book Pro with Intel Core i7 and 2,66 GHz with a 4 GB RAM. The system is good, until I connected my external hard drive from Mac Way that connects to the laptop through a Firewire 800. The HD mounts well with a USB but not with a Firewire 800. I then went to the System Profiler and found this message in Hardware/Firewire - No FireWire ports were found.
I restarted the system and the system hangs or takes like three minutes to start, usually it starts in less than a minute. So I pressed on the power button for 5 seconds and again started the machine.
This time, surprise the HD mounts and in the Firewire in System Profiler, I have Firewire Bus, and when I click on it I have OEM ATA Device 00 and below
OEM ATA Device 00:
Manufacturer: DMI
Model: 0x0
GUID: 0x30E002E0000983
Maximum Speed: Up to 800 Mb/sec
Connection Speed: Up to 800 Mb/sec
Sub-units:
OEM ATA Device 00 Unit:
Unit Software Version: 0x10483
Unit Spec ID: 0x609E
Firmware Revision: 0x120
Product Revision Level:
Sub-units:
OEM ATA Device 00 SBP-LUN:
Capacity: 2 TB (2 000 398 934 016 bytes)
Removable Media: Yes
BSD Name: disk1
Partition Map Type: APM (Apple Partition Map)
S.M.A.R.T. status: Not Supported
Volumes:
BW Time Machine:
Capacity: 2 TB (2 000 263 774 208 bytes)
Available: 779,33 GB (779 328 532 480 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s10
Mount Point: /Volumes/BW Time Machine
I am able to use the Time Machine function.
Does any wise ones have suggestions out there? Thanks in advance for your kind help.

https://support.mozilla.com/en-US/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser

HT201302 When I am trying to import pictures from my iphone to PC, I get the message'No new pictures of videos were found on this device'. There are lots of pictures which i can see on the iphone. I have a 4S. Is there a way to get around that?

When I am trying to import pictures from my iphone to PC, I get the message'No new pictures of videos were found on this device'. There are lots of pictures which i can see on the iphone. I have a 4S. Is there a way to get around that?

It sounds like you are using an application to import. You can do it manually.
Start > Computer (on the right) > scroll to the bottom and you will see your iPhone under Portable Devices > Open it and you will see a Drive, open that and there will be a DCIM folder. That is where your photos will be (There may be other folders each holding photos).

"No NI myRIOs were found"

I just received my new myRIO hardware... I installed the software (3 Disks) and used the NI update service to make sure I made the latest versions and bug fixes...
After starting LabVIEW, I tried to use the "Launch the Getting Started Wizard"... Getting a "No NI myRIOS were found" window...
The unit is powered and connected to the USB port on my computer, because the myRIO Unit does show up under MAX - But indicates that Windows does not have a driver associated with it...
I went to the ni.com/drivers site and installed the drivers - Made no difference...
Any suggestions from users on how to fix this? Feels like I'm making a "newbie" type of mistake but can't seem to resolve it...

Hey Hunado,
That is exactly how the myRIO should show up. It acts as a Virtual Network adapter to establish a connection to your development computer. (Let me know if you have questions about this. )
Are you able to see the myRIO in MAX under Remote Devices? Do you have a firewall enabled?
Thanks!
-Sam K
LabVIEW Hacker
Join / Follow the LabVIEW Hacker Group on google+

Solaris 10 install problem "No Solaris Web Start Ready products were found"

I am trying to install Solaris10 U5 in SunFire 240 .
I booted the box through CD-ROM and chosen NFS to install the OS.
when it asks to specify the NFS Server details, after entering my NFS Server/share details, i am getting a warning message, and installation won't go.
"No Solaris Web Start Ready products were found"
Why i am getting this error ?
What is the solution ?

Check the HCL to see if your SCSI controller is supported
http://www.sun.com/bigadmin/hcl
If not, LSI may have a driver at
http://www.lsilogic.com/downloads/selectDownload.do

User tables belonging to the dbo schema were found in the database...

Hi
I´m running SAP on windows server 2003 R2 x64 sql 2005.
I have installed a sandbox system based on NW 7.01 SR1 ECC 6.0. It´s only abap.
After that I wanted to make a system copy of our production system to the the sandbox. So my sql colleague took a full backup of the production database and restored it into the sandbox.
Now I´m trying to run the system copy installation sapinst - SAP ERP 6.0 EHP4 Ready (Support Release 1) - Sotware life Cycle Options - System Copy - MS SQL Server - Target System Installation - Central System - Based on AS ABAP - Central System...
I choose custom and say it´s a Homogeneus System Copy (MS SQL Servver-specific)
After that I choose "Use existing database" but the it say:
*User tables belonging to the dbo schema were found in the database ES0. SOLUTION: You can only install an SAP system in a database with no user objects belonging to the system schema dbo. If there already is an SAP system in the database (MCOD), or you install a Java Add-In, you might have to convert the existing system to its own schema, or contact your SAP support.*
I have searched the forums and can´t find anything I can use. I found someone wrote that I should change the control.xml file under sapinst directory:
Proceed as follows:
1. Stop SAPinst.
2. Open the file control.xml in the sapinst log directory and look for the following lines:
AllowNew: mig ? ?false? : ?true?,
AllowDboObjects: mig ? ?true? : ?false?,
3. Change these lines to
AllowNew: ins ? ?true? : ?false?,
AllowDboObjects: ins ? ?false? : ?true?,
4. Save the control.xml, restart SAPinst and choose ?Continue old installation?.
but it is not helping.
Please advise me.
If this is the wrong forum please tell which one is correct.
Best regards
Thomas
Edited by: Thomas Aastrøm on Feb 23, 2012 3:49 PM

Hi again
Phase 11 is ok now. We changed the database owner to sap SIDadm.
But now it fails at phase 12 (Move MS SQL Server objects from one schema to another)
An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > Software Life-Cycle Options > System Copy > MS SQL Server > Target System Installation > Central System > Based on AS ABAP > Central System. You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/ERPEhP4/LM/COPY/MSS/SYSTEM/CENTRAL/AS-ABAP/.
sapinst.log:
INFO 2012-02-24 13:18:55.427
Execute step MoveSchema of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssSchemaMove|ind|ind|ind|ind|2|0
ERROR 2012-02-24 13:18:56.349
FCO-00011 The step MoveSchema with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssSchemaMove|ind|ind|ind|ind|2|0|MoveSchema was executed with status ERROR .
ERROR 2012-02-24 13:18:56.146
MDB-05053 Errors when executing sql command: [Microsoft][ODBC SQL Server Driver][SQL Server]Object 'ep0.AFKO' does not exist or is not a valid object for this operation.
<p> SOLUTION: If this message is displayed as a warning, you can ignore it. If this is an error, contact SAP support.</p>
INFO 2012-02-24 13:19:02.583
An error occured and the user decided to retry the current step: "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssSchemaMove|ind|ind|ind|ind|2|0|MoveSchema".
ERROR 2012-02-24 13:19:02.770
FCO-00011 The step MoveSchema with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssSchemaMove|ind|ind|ind|ind|2|0|MoveSchema was executed with status ERROR .
What to do?
Best Regards
Thomas

"No photos were found to import"

This is a recurring problem in LR3.2 (WIN/Vista) for me, and none of the forum answers seem to address what I am experiencing.
I have a folder on my hard-drive that contains 10 images. Of the 10, 5 are .psd, and 5 are .jpg. Each of the 10 images have unique file names (unique.psd), so there is no stacking involved of like named images here. I select the folder in LR3.2, and it shows 5 of the .psd, and 2 of the .jpg files. I click “Library>Synchronize“ and the Synchronize dialog window opens. It has found 3 new photos to import. The radio button (Import new photos (3) is checked, so I then click the ”Synchronize“ button. The ”Import files at there current location“ bar at the top left shows that the ”Task completed“, then an error pops up stating, ”No photos were found to import“. So no images actually get imported.This has happened to me on many different folders, (at least 6) and each time there are unique images on the hard drive but not imported to LR3.2.
All of the images are 8 bit, and are found in different folders of my catalog. I have a master file where originals are stored, and then a seperate folder where images are exported for upload. I need to manage the upload folders seperately for my business.
Any suggestions would be helpful.
Regards

I'm getting this too on Nikon raw files, all from a batch of files/folders of a three day shoot in Big Sur. LR3 has decided it doesn't want to import day two folder photos. It does import day 1 & 3 with no problem. I've changed the master folder names to have unique names, sub folder names have been changed. Next on to changing file names (big hassel!)

"No CD drives were found"

Similar Messages

Maybe you are looking for