No cell connection and date shows January 6, 1980

I have lost cell service and the date on my device shows January 6, 1980

Let's bring your phone back to present time, SnowTx. Does your phone indicate that it is connected to 3G at all? Are you able to dial *228 and select option 1? Have you recently activated this device?
AndreaS_VZW
Follow us on Twitter @VZWSupport

Similar Messages

HT201210 my Ipod is stuck with a picture of a connection and Itunes showing..

my Ipod is stuck with a picture of a connection and Itunes showing.. my Itunes says it is unable to recover it,
what should I do..the Ipod is stuck in this screen and nothing happens if I turn it on or off...

Due the unsuccessful updation your iPhone has stuck in recovery mode. you need to download the iOS 7.0.2 from the following link http://appldnld.apple.com/iOS7/091-9872.20130924.2wc82/iPhone4,1_7.0.2_11A501_Re store.ipsw and restore your device manually,please make sure you have all the backup stored since this will be a restore not an update so you data will be lost and you will have to restore your data from backup.You can do this by shift + mouse click the restore button in iTunes this will give you an opendialogue box to select the iPSW from which you want to update your iPhone after that have some patience and let the iTunes complete the installation and enjoy iOS 7.0.2.

I have an Iphone 4 and it keeps kicking in the 3G instead of using my wifi. My wifi works well with all other devices and the password is fine. I connect and it show the connection then goes back to 3G. Thank you

I have an Iphone 4 and it keeps kicking in the 3G instead of using my wifi. My wifi works well with all other devices and the password is fine. I connect and it show the connection then goes back to 3G. Thank you

This crap just happened to me this morning where I was sent 90% data plan threshold warningfrom AT&T (while sleeping at 7:09am) then 5 minutes later getting the Overage data plan warning from AT&T. This is all while I'm asleep right next to my phone plugged into a (non-Apple) dock on my clock radio.
Android has a limiting feature, why can't the "smart" guys at Apple learn from this??

Two times and dates show on the first page with an old set under the correct set.

I have a second tine and date showing on the first display page, like a shadow under the correct date and time. This is happenong on my iphone5, but was also there on my 4. Any ideas?

I would go to settings-general- reset all settings, if that doesn't work I'd do a reboot, and finally if I couldn't get that to work I'd do a restore as a new phone.

Can Firefox 5 set to stop a connection and/or show a a progress bar rather than only ' loading'? I miss my version 3 after updating.

Can Firefox 5 set to stop a connection and/or show a a progress bar rather than only ' loading'? I miss my version 3

You can use this extension.
*Status-4-Evar: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/

Design partner for hug amounts of db connections and data?

I am new to J2EE and I have a question to the more experienced architects here. I would like to build an application based on a J2EE server that will regularly poll multiple databases from different manufactures over the network or the Internet (could be several 1000) and save this data in a central database. This would mean that a full-scale application could receive hug amount of data in bursts or sent on an e2e fashion. For a web shop type of application there is the MVC architecture but is there a design partner for this type of problem where I need to handle hug amounts of db connections and data?
Any help or suggestion would be greatly appreciated.

Are you talking about merging serveral data base to a single repository database ?

ITouch won't connect and doesnt' show IP Address

I have been connecting to my home wifi without a problem. All of a sudden, I can't connect. Other wireless devices connect without a problem. My iTouch does connect without a problem on other wifi networks. My iTouch sees my wifi network, but no IP Address or other data is showing on the iTouch. HELP!

sunnhausl wrote:
I tried that already, too! New development...I have the same problem in my office now. So, clearly, it is a problem with my iTouch. It recognizes the networks, won't connect, and when I go into look at the network, there is not data (IP address, etc.) It's just blank. HELP!
You could try restoring the S/W on your iPod Touch. If that doesn't work you may need to talk to Apple about repair.

Netflix app error - Please make sure network connectivity and date and time are accurate

Am getting this error message when trying to view instant movies via ipad2 or iphone. Anyone have this error? I can't connect to Netflix via either device - I've tried unistalling & re-installing Netflix app on both devices. I am connected to the internet via our home network and date & time are correct on all devices & home computer - any other setting I'm missing? I didn't have any of these problems before I installed the new iOS5 on my devices. Netflix said it's an apple operating setting that needs to be modified.
Any help would be greatly appreciated.
Thanks!
Kristen

HI Jason,
I feel for you. That's a lot of work!
How large is the partition you tried to create using BootCamp for Windows?
And how much free disk space is on the MacBook startup disk?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you always have a minimum of 10% to 15% free disk space at all times.
Just in case, check the Mac startup disk for errors.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
Carolyn
Message was edited by: Carolyn Samit

Smart Connect and data

I tried using Smart Connect (on my E4G) at night - to turn off wifi and data at night and turn them back on in the morning. The wifi part worked flawlessly. Data connection do get disabled at night, but wont re-enable in the morning - I have to manually enable it. Any workaround?
With SmartConnect on, phone loses only 4% charge overnight, otherwise it is 10-12% - it would be wonderful, if it is completely automatic.
Thanks,
Anoop
Solved!
Go to Solution.

@anoopr
There was a similar question, regarding low battery mode, you will have to enable it manually.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Time and date showing wrong time when set on auto since 4.1 update

hi since i updated my 3gs to 4.1 my time and date have changed by about 1 and a half hours and afew days before. i can change it manually but i dont understand why this has happened. has this happened to anyone else?
can anyone help? or am i just best to wait till the next update?

Me too.
Second time I've been late to work in two weeks thanks to Apple ** programming!
First time when I upgraded to 4.1 and the alarms stopped working if they were set to go off every working day.
Then again today when the time unaccountably rolled back to be Sunday the 7th at 5am instead of WEdnesday 10th at 9am. Waiting for the day I'm out of contract on this rubbish so I can switch to a phone with a decent OS!
Message was edited by: twixPanther

Problem with update form and date (show 1970-01-01)

Hi, I've a update form (php/mysql) with many date input field. When my date is 000-00-00 I show 1970-01-01. Why??
This is the code:
label for="data_chiusura"><strong>Data chiusura</strong></label>
      <input type="text" name="Data_chiusura" value="<?php echo $string=$row_Recordset1['data_chiusura'];
    if($string == '0000-00-00'){
    $string = '';
    } else {
    $string = date("d-m-Y", strtotime($string));
    }; ?>" id="Data_chiusura">
Thanks
k

Why would the date ever be null? As long as the date has a non-zero, non-null value this function will work correctly.
I'm a little confused by what you are doing here. So, you are pulling data from a table, and populating forms with it. This particular field is a date field, and the problem is that when the data for that field is a null, you are getting instead a date of 1970-01-01 displayed in that field - is that correct? What do you want to appear there when the data is null? Nothing?

Step by step guide to create a RFC connection and data transfer

hi
could i get a step by step guide to transfer/read data from SAP and legacy system using the concept of RFC.
Regards
Shiva

hi
Here are the steps.
SM59 Transaction is used for Connection Establishment with Destination.
When you establish a connection to a client through a destination, the HTTP connection must first be entered in transaction SM59.
There are two types of HTTP connection in transaction SM59: Call transaction SM59 to display the different RFC destinations.
The HTTP connection to the external server (connection type G) and the HTTP connection to the R/3 system (connection type H) are different only in their logon procedures. Their technical settings are the same. To display the technical settings, double-click a connection.
You can choose from three tabs. Under Technical Settings, you can specify the following:
· Target Host: The host to which you want to connect.
Note that if you are using HTTPS as a protocol, you have to specify the full host name (with domain).
· Service No.: Here, you specify the port. The destination host must of course be configured in such a way that the specified port understands the corresponding protocol (HTTP or HTTPS). See Parameterizing the ICM and the ICM Server Cache.
· Path Prefix: At the time when the connection to this destination is initiated, the system inserts this sub-path before ~request_uri.
· HTTP Proxy Options: Here, you can configure a proxy for HTTP connections: You can determine the proxy host and service, as well as users and passwords for the HTTP connection.
The tab page Logon/Security will be different depending on whether you have selected a HTTP connection to an external server (connection type G) or a HTTP connection to an R/3 system (connection type H).
HTTP Connection to an External Server (Connection Type G)
Choose the connection you want to use. You can choose from the following logon procedures:
· No Logon: The server program does not request a user or password.
· Basic Authentication: The server program requests a user and password. Basic Authentication is a standard HTTP method for authenticating users. When a user logs on to the target system, he or she provides a user ID and password as authentication. This information is then sent in a header variable as a Base 64-encoded string to the server, through the HTTP connection.
· SSL Client Certificate: If you use client certificates for authentication, the client authentication is performed through the Secure Sockets Layer (SSL) protocol. In this case, you must also select the SSL Client PSE of the SAP Web AS that contains the relevant certificate for the authentication. The target system must handle the issuer of the SAP Web AS client certificate as a trusted system.
Under Logon/Security, you can also activate SSL to ensure that HTTPS is the protocol used (if you select SSL, make sure that the correct port is entered under Technical Settings). In the security transaction STRUST you can determine which type of SSL client is used. (Getting Started with the Trust Manager, Trust Manager).
The field Authorization for Destination has been implemented as an additional level of protection. We recommend that you specify a user and password for the RFC destination.
HTTP Connection to an R/3 System (Connection Type H)
Here, you can specify more settings for authentication in the target system.
The settings under Technical Settings and Special Options are the same as for connection type G. Under Logon/Security, the connection type H has additional logon procedures. As with external servers, you can activate and deactivate SSL and specify an authorization.
Because the target system is an SAP system, you can set the client and language for the logon as well as the user name and password. If you check Current User, you have to specify the password.
The following authentication procedures are available: Basic Authentication, SAP Standard, and SAP Trusted System, and SSL Client Certificate.
· HTTP Basic Authentication: Logon with user and password
· SAP Standard: This procedure uses an RFC logon procedure. The RFC Single Sign-On (SSO) procedure is valid within the one system. The same SAP user (client, language, and user name) is used for logon.
· SAP Trusted System: Trusted RFC logon to a different SAP system (see Trusted System: Maintaining Trust Relationships Between SAP Systems)).
· SSL Client Certificate: The SSL protocol enables you to use client certificates for the logon.
Type G/H (SM59)
Timeout:
When sending a HTTP request, you can use this parameter to specify the maximum response time for the connection.
HTTP Setting:
You can use the HTTP version to specify the protocol version of the HTTP request (HTTP 1.0 or 1.1).
Compression:
You can use this option to activate the gzip compression for the request body. This can only be activated in HTTP Version 1.1.
Compressed Response:
In the standard setting, the SAP Web Application Server sends the Accept Encoding field as a header field with the value gzip, if the application server can handle this compression. This notifies the partner that the caller can handle gzip decompression, and that the partner can send compressed data. If you want to prevent a compressed response being sent, choose the option No.
HTTP Cookie:
You can use this option to control the way received cookies are handled.
You can specify the following for cookies:
· Accept them automatically
· Reject them automatically
· Accept or reject them in a prompt
· Use a handler for the event IF_HTTP_CLIENT~EVENTKIND_HANDLE_COOKIE to process the cookies in the program.
· In the next section, you can read about the parallelization of requests.
Thanks,
vijay
reward points if helpful

Oracle DB Connect and Dates

Hello
From what I have read, reading dates from a table connected via dbconnect is not easy. OSS recommends that you create a view in the source system with a character mask on the date fields as Oracle stores dates in a unique way.
In my situation I cannot create views in the source system. Does anyone know of a way to convert this number using ABAP ?
Thanks
Cameron

Hi Cameron,
I'm using two types of such views:
1. a view in the remote system that reads SAP tables
2. a view in SAP that replaces a SAP table, that reads a table in the remote system. In order to do so:
2.1. rename the table in the SAP system: for example: RENAME zfbuz TO zfbuz_backup
2.2. create the view in the SAP system: for example: CREATE OR REPLACE VIEW sapr3.zfbuz AS SELECT ... to_char(date_column, "YYYYMMDD")... FROM ...@dblink
Pls write back if you need more help. BR,
Alvaro

5320 XM Cell Broadcast and Date and Profiles on sa...

How do I get the Cellbroadcast, Date, and Profile Name to be displayed on different line on the manin screen. I am unable to see the cellbroadcast from my service provider.
Thanks
Overberg

Have the same problem, as I already mentioned in my posts too. But unfortunatly no reply from Nokia either. Seems they really don't care about it. It would be at least apropriate, that they at least announce time of new firmware and note if they will fix this problem with it.
But no replay from them I contacted local nokia dealer in Slovenia, but they just say they can not help. And that we must wait for new firmware.
Now I wonder, when it should came out ?! I am sick of this trouble with my phone. and as you said, I am also turning off my phone since I want my battery to last longer. so this bug must be fixed.
Nokia team, anyone?!?!?

Iphoto 08 7.1.1 VS IPHOTO 6 6.0.6 dialog and date stamping photos

Hello again,
I asked how to date stamp and describe each job photo I take on my 08 version of Iphoto since it doesn't have the "YEARBOOK" selection in the BOOK formats. well I just tried something for the he## of it and it worked real well. Don't use BOOKS at all. Put the photos in ALBLUMS, click "select all" in EDIT click "batch change" in PHOTOS, set Title to Date and TIME then when the time and date show under each picture type next to them what you want to describe. Cilck on PRINT and a drop down menue will appear, chose "Proof sheet" and hit print again and off you go. NOTE if the date and time do not appear when you choose "Date and Time go to VIEW and make sure "Titles" is checked. It works for me -Now back to all my other problems --How come MIGRATE ASSISTANT doesn't????

Sorry Larry,
It was late and I was blind so I threw out the question -----The problem is I used the Migration Assistant when I got a new HD installed in my G4 and nothing happened other than the Fire Wire logo just kept running on my screen. I tied my G4 to my Imac with a Fire Wire--followed screen prompt on my G4 to restart my Imac while holding down the "T" key (on the IMAC). I did that and the Fire Wire logo appeared and began running in the faded mode on my IMAC screen. (Normally it should be a bright gray and yellow) I let it run but nothing ever happened and no info showed up on my G4. I tried it several times until the definition of Insanity popped into my head. I have a Rocstor back up HD for storage, tried leaving connected and disconnecting it to no avail. I assume that the Fire Wire logo running in the "ghost" mode is telling me something unfortunately I am just to clueless to know what it is. I am sure that I changed cables (reasonably) as that would be a natural, but nothing changed. I have gone the other way, G4 to IMAC using the same procedures with no problem.
Thanks, Mel

No cell connection and date shows January 6, 1980

Similar Messages

Maybe you are looking for