No central person is assigned to Business Partner
Hi,
we are using srm 3.0 with ebp 4.0
While updating the org strcuture we deleted the Position entry & the assignment for one user.
Also the BP entry was deleted using bupa_del.
we have few shopping carts open in the system which , so we used users_gen and recreated the user in org struture but now when we try to display the shopping cart via bbp_pd we get message.
No central person is assigned to Business Partner. ID 4259F7DCC67E3C9AE1000000C6D07530
Message no. CRM_CENTRAL_PERSON003
also on using the portal when we try to monitor the shopping cart and then display the line litems we get message system error in check_status_sc (LBBP_MON_SCF50).
can some one tell us what do we need to do to correct the error.
Thanks.
R.M.
Check the BP for the user after creating again. It should have changed, that's why you are getting this message. So you need to update the new BP in the shopping cart. There are some reports to change the requestor do some seach in SDN forum you will find it. Once you update the new BP in the shopping cart you should be all set.
Thanks
Padhi
Similar Messages
-
Auto Assigning of Business Partner to a task
Hi Champions,
I have a situation where I have to assign a business partner as soon as joining happens to a default task and default role of the project through ABAP program.
I have been able to achieve the auto allocation of the business partner to default role using the BAPI BAPI_BUS2177_STAFFING_ADD. This creates a link in DPR_BUPA_LINK table also.
Now I am stuck as to how to assign this business partner to the default task. Which BAPI shall I use and what shall I pass as input to it achieve this.
It will be great help on hearing from on this.
Regards, SandeepHi
Logic can be like this:
Get GUID of Task of which is going to be default.
Once employee (BP) is created, the program (scheduled at backend) will run n use the FM u mentioned.
Niranjan
Let me know if you need more info !!! -
Incident management error: You are not assigned a Business Partner
Hi
I am facing a problem while creating message as below
error: You are not assigned a Business Partner
I created the BP. which has clear identification too.
Even this BP is maintained as Employee too.
Expecting ur valuable suggestions.
Regards,
SivaHi
Was this issue ever resolved?
I have the same problem.
I have business partners, also created as employees with their user id held in the Identification tab of the employee view in BP.
In the business partner Identification tab, they have the system ID>Installation No>client>user id maintained
When I go into solman_workcenter I see the message 'you are not assigned a business partner' and I cannot see any of the tickets assigned to me.
Has anyone had the same issue and resolved it?
Thanks for your help.
Ashley -
Hi,
In the Dealer Portal, Vehicle Sales Role --> Personalization.
I am getting below Warning message.
The Web Dynpro component assignment for business partner is missing.
As per my investigation found below.
Since address formats are different for each country, you can define in the Customizing activity Assign Web Dynpro Components to Country-Specific Address Formats under SPRO --> Logistics Execution --> Dealer Portal which Web Dynpro component you want the system to use for displaying end customer addresses.
BUT do NOT understand the name of WebDynpro Component to provide.
What are the entries or WebDynpro component names to fill in below?Hi Hussain,
Could you share the step-by-step solution? Thanks. -
Manual assignment of Business Partner in PPOMA_CRM with respect to Organiza
Dear all,
I am using external number ranges for the Business Partner, that's why I want to assign manually business partner (should appear in the column of BP in front of an Organizational unit) in transaction code "PPOMA_CRM". The system assign the BP automatically with the Internal number assignment but i want to use the External Number ranges. really appreciate your help.
cheers,
Administrator.Hi Monika,
A position cannot be shared between 100 or 1000 employees. At the max between 2-3 employees with the total percentage adding up to not more than 100 %.Its ideal that each employee has a unique position so that it can be helpful in reporting as well.
Regards
Leon -
Hi Experts,
I get this error when replication the Organization Unit created in transaction BP from CRM to ECC.
The error is generated in ECC system and Error Class is CVI_EI.
Any ideas.
Kind Regards,
GauravHi Gaurav,
The Business partner does not have 'industry Key' that is reason the warning msg is coming.
BRSCH- Industry Field
you can check this in structure 'CMDS_EI_VMD_CENTRAL_DATA ' which will be filled at run time and later validation happen in Program 'Fill_customer_central' on it. You can set up breakpoint at line number 183 where the validation is failing and warning message is getting raised.
Please assign point if above information helpful.:-)
Thanks
Prem -
Automate the assignment of business partner attribute set .
Hi All,
I want to automate assigning marketing attribute set and their respective attribute values using ABAP program.
I am debugging the code and also trying to debug by using Trace , but no success till now.
any one knows how to do it ?Thanks Gregor,
I got the funciton modules :-
CRM_MKTBP_ASSIGN_ATTRIBUT_TAB
It assigns the attribute set and its corresponding attribute vales.
Message was edited by: Nav -
Hi Gurus,
Hi All,
I would really appreciate if any one can help me out in this issue
error "No central person is assigned to Business partner you get it when you are trying to put the person in the tree(ORG model).
Role is employee which is coming from r/3 HR I checked it. Its o.k in HR
Thanks in advance ...
sridhar
[email protected]Hi Sarath,
Try to do the following
1. Go to BP and open the BP wanted to assign to Org tree
2. Go the Identification Tab
3. Maintain User Name for that BP.
4. Then assign this BP to the Org as a Business Partner.
Now you should be able to get the Central Person ID generated for this BP in the Org tree and no error should occur.
Let me know if wont work.
Siva
Reward points if its solves ur problem. -
Business partner -Central Person
Hi,
Please canyou know let me know if there is any relationship between person and business partner -central person
Regards,
AmitHi,
The Business partner and the central person gets created automatically when you hire an employee.This is captured in HRP1001. further you can create a business partner using transaction BP
Regards,
Prasad -
How to delete Central Person?
Hello,
I have a situation where when I execute BBP_BP_OM_INTEGRATE for Business Partners (Employee), I encounter the following error...
Business partner with ID 3CA562E5E5A410479819A6FCD7DDA2A6 is not an employee
The repair mode does nothing to fix this error. When I goto into PPOMA_BBP, I found a Central Person who is not assigned to a Business Partner and therfore not attached to any part the organization structure. Is there a way to remove this Central Person? Since the Object cannot be found in PPOMA_BBP, what can I do to resolve this?
Thanks in advance, Dean.Hi
<b>Please provide the System version details -></b>
1) You can unassign or block this vendor contact person by using transaction code BP. Find out the business partner number of the vendor contact person and go to the status tab in T-code BP for the role vendor in business partner maintanance and click on block business partner. This will ensure that you are unable to select this business partner in the search criteria.
2) There is a Standard SAP report to delete the Business partner.
Use Transaction SE38 and execute the report BUPA_TEST_DELETE.
You can select Business partner or partners and delete.
3) Either using BBPMAININT (Manage Business Partner - Web Transaction)- Try either - Edit / Delete / Block; this Contact person.
4) You can do it from transaction USERS_GEN. You can delete and/or assign user from there.
<b>Related links -></b>
Re: Central Person already exists
regarding business partner, central person and organizational unit relation
Hope this will help. Do let me know.
Regards
- Atul -
How to Assign Business partner for Vendor Organisation
Hi,
We are in SRM upgrade from SRM 3.0 to SRM 7.0.
For Vendor organisation say 0 50002381 there is no Business partner assigned.
Under this organisation there are 200 vendors .
When i run the report: BBP_XPRA_ORGEH_TO_VENDOR_GROUP
it is showing an error -No partner assigned
How to assign the Business partner for the organisation .
Please give your inputs
Regards
G.Ganesh KumarHi Muthu,
Thanks for the reply
Already the SAP NOTES : 1372409 is applied.
I am running the Migration report: BBP_XPRA_ORGEH_TO_VENDOR_GROUP. I am getting an error
" Check mode 9: :Invalid Object on supplier node"
How to resolve this issue.
Already one more thread is open for this issue
Regards
G.Ganesh Kumar -
Multiple contact persons for Business Partner
Hi,
I'm searching for an extractor which can extract all contact persons beloging to a Business Partner. The customer would like to make a query on business partner and their contact persons related to a marketing campaign. Any suggestions?
Regards,
CBUsing the DTWQ to update the new additional contact person. No need to use add option. It is because you just only add the additional contact persons and no new BP
jimM -
FM to create business partner in dialog from address
Hello gurus,
anyone got an idea how to create a business partner in dialog mode and provide a given address as default. I already checked several function modules / BAPIs, but I couldn't find one that provides this functionality.
Would be great if someone has a hint!
Thanks in advance,
AlejHi,
Try this BAPI_BUPA_FS_CREATE_FROM_DATA2
With this method you can create business partners in selected business partner roles (BP roles).
You can create business partners of the category person, organization, or group, enter relevant general data, and control the number assignment using business partner grouping.
You can also enter an address including data for address-dependent and address-independent communication methods.
For more info on BAPI_BUPA_FS_CREATE_FROM_DATA2 [click here.|http://www.se80.co.uk/sapfms/b/bapi/bapi_bupa_fs_create_from_data2.htm]
Try this also BAPI_BUSPARTNER_CREATE
[Click here |http://www.se80.co.uk/sapfms/b/bapi/bapi_buspartner_create.htm]for more info.
If you create a business partner in dialog using the Create business....[click here|http://education.feedfury.com/content/14689322-master-data-template-categories-b partner-and-contract-account.html].
May it helps you.
Regards.
DS. -
Organizational objects do not create a Business Partner ID
I am setting up SRM org structure with PPOCA_BBP/PPOMA_BBP transaction. I am creating, companies, plants, purchase orgs, purchasing groups and positions and the problem is that SRM is not assigning a Business Partner number to any of those.
I have already checked that there is an internal and external number range setup for Business Partners. Do you have any hints why this could be happening? Your help will be appreciated.
Thank you.Hi
Which SRM version are you using ?
I imagine you would like to synchronize business partner data, which are created in backend, into SRM. You can use Tcode BBPGETVD or BBPUPDVD or run/schedule bbp_vendor_sync (need customizing).
You can create BP:->
1) Either via middleware replication from R/3 to SRM - BBPGETVD.
2) Either manually directly in SRM web transaction - BBPMAININT.
<u>Please go through these pointers, which will definitely help -></u>
Re: Errors: Business partner of organizational unit 50024549 has no address
Re: Assinging users to Business Partners in EBP Org Structure
Missing Business Partner
Re: Error Changing Business partner address
Re: Problem with BP. Assignment: Business partner person to user not unique
Error in creation of Employee for Business Partner
Re: Business Partner not created in PPOMA_BBP
delete company code in ppoma_bbp
Re: Business partner relationships -- "Is Identical To"
Re: PPOMA_BBP / PPOCA /PPOSA without Address field
Do let me know.
Regards
- Atul -
Business Partner Number - HRALX-HRAC problem
Hello,
I am trying to configure Service desk in Solution Manager 7.0
While creating Business partner through t-code ppoma_crm.
But after creating Business partner, there is no assignment of Business partner number to business partner.
I have check entry HRALX-HRAC in table T77S0, in transaction sm30,
For HRALX-HRAC flag is not set.
What should I do to set this Flag?
Should I set manually or there is any procedure for it???
Kindly guide regarding this.
Thanks,
Chandresh Pranami.Dear Chandresh,
have you activated the BC sets for service desk?
You can the following
Go to the following IMG path: Customer Relationship Management -> Master Data -> Business Partner -> Integration Business Partner-Organization Management -> Set Up Integration with Organizational Management.
Find the entries starting with HRALX. You should have those entries:
HRLAX - HRAC with the value u2018X',
create this entry in the table and Save.
HRLAX-OBPON with the value u2018ON',
create this entry in the table and Save.
Regards
Prakhar
Maybe you are looking for
-
I'm using iPod touch for a year now. It was doing fine this morning but in the afternoon suddenly when I took it out of my bag, the screen was just black and it wouldn't turn on and stuff. So I thought it didn't have battery so I charged it didn't wo
-
Size of XI messages processing image files
hi, I hav a scenario in which XI is picking up images form a database and is sending them to another database. The JDBC sender adapter in use has a query like select image, file name, file size from table where file name starts with 'a', thus at time
-
Do your Home Work BEFORE you "upgrade" to snow leopard
Here is my experience with this upgrade... I provide in hopes to prevent others from spending hours and hours with this upgrade... 1. First, I have 3 video cards in my MacPro. One is an ATI HD3780. Once I upgraded to Snow Leopard, my mac would not bo
-
How do I rename a group of photos ?
I can t find a way to rename a group of photos at the same time as I did in Aperture. Has anyone a solution ?
-
How can I collect my email activity data using some api ? for exemple snds api