No certificate profile found

Hi Everyone,
I am trying to generate certificates when we do a post goods issue for an outbound delivery.
When I go to vl03n and go to extras, delivery output, header; I see two entries one for LQCA and one for LQCB.  both have a red status and the processing log states that "No certificate profile was found".
I used QC03 and did a search using assignment on the certificate profile field and entered the material number that is on the outbound delivery.
the system pops up a window that shows that material assigned to a Cert. profile on 4/2/2008.  The outbound delivery is for 4/16/2008.
Any idea what I should be looking for?
Thanks,
Mike

Hi Mike,
Please check the Validity Period of CErtificate Profile and assignment.
You may create a new asssignment is QC15 for the combinations of Plant/Material etc.
Thanks and regards
Murugesan

Similar Messages

  • MIC Selection in certificate profile on the base varsion.

    Dear Experts,
    i am not able to get my required MIC with valid task list selection on the date base, I have a MIC with versions 1,2,and 3 i need to select the MIC with version 1, i have created a certificate profile and for selecting the MIC i have chosen from Extras- Characteristic from valid task list and gave the valid group and the old date in which the MIC with version 1 is valid after selecting the MIC if i go and check in the display MIC i am observing the new MIC with version 3 only, But if i directly enter the MIC and its version number it is selected where as i am not getting it when i select it from task list, please let me know if the behavior is as per the standard SAP or not and is there any possibility to select the old version MIC from the Task list directly.
    Regards,
    Naveen.

    Hi Sujith,
    For example:
    My MIC Details:
    MIC       Version     Created       and  Changed
    A        -       1        -   17.10.2008   
    A        -       2        -   17.10.2008   and  22.06.2011
    A        -       3        -   17.10.2008   and  22.06.2011
    A        -       4        -    17.10.2008  and  12.10.2011
    Task List:
    Group           Change number          Valid from              MIC      Version
       1          -        NA                      -     23.10.2008      -       A      -      1    
       1          -      10000008994       -     20.10.2011      -       A      -      4
    Change number details:
    10000008994    Created on:22.06.2011 changed on:18.10.2011 and Valid from date:20.10.2011.
    Now i created Certificate Profile today and while selecting the MIN from Task list i gave the details as Group and valid from date as 19.10.2011 and found the MIC A with version 1 and selected the version and after saving when i go and check the MIC details i found it as MIC A with version 4 dint understand why it is version 4 even after i selected version 1 and saved it.
    Can you please comment on this why it is changing like this but one thing i observed is if i directly enter the MIC and give the version as 1 and save, it is remaining the same.l am getting this problem only when i select it through task list.
    Regards,
    Naveen.
    Edited by: vaddapalli naveen on Feb 22, 2012 5:43 PM
    Edited by: vaddapalli naveen on Feb 22, 2012 5:48 PM

  • Certificate profile

    How to prevent erase of certificate to sign and encrypt? I've not found in restriction the setting for save certificate.

    Hello Atul,
    COA Profile
    A certificate profile controls inspection lot selection, the sequence of characteristics, and the characteristic data.COA Profile contains the List of MICs in desired sequence in which the result for them is supposed to be printed in the COA.
    Within the certificate profile, you determine the selection and sequence of the characteristics whose results are to be documented on the certificate. You can vary the origin and representation of the data for each characteristic. You can also withhold certain information from the certificate, if, for example, you do not want to reveal a certain measured value.
    At the header level of the certificate profile, you can define restrictions for selecting inspection lots and partial lots. For example, you may want to specify that only lots with a quality score of at least 80 are considered. At certificate creation, the system selects all inspection lots and partial lots for the material (and batch, if necessary) that meet the selection criteria and have a usage decision. The characteristics are then retrieved from the most recent inspection lot or partial lot in this list. (The lot creation date is the determining factor.)
    If further clarity required, pls let me know.
    Now towards your second question,,,,
    In COA Profile, you want to know what are the materials assigned,,,,
    Here are the options available....
    1. In COA profile QC02/QC03 screen there is a tab available named as "ASSIGNMENTS", just click on it and it will give you the details.
    2 The best way is Run trx QC17. and know the list.
    Regards,
    Shyamal

  • Mac Client Certificate not found

    Hey all, i'm trying to install the ConfigMgr client on a mac system. The site is 2012 SP1 RTM however since there is no release yet of the mac client i'm using the mac client install from the SP1 beta install folder (Suggested by Microsoft)
    I followed the instructions on how to install clients on mac computer from technet. Everything from the install and the enrollment seems to complete fine no errors. After the enrollment when I open System Preferences > Configuration Manager it says "Certificate
    not found" If i check the ccmclient log file on the mac it shows the following errors
    Failed to Parse MgmtAuthority ServerList
    Failed to get server list
    Failed to GetProperty Mode from Configuration Provider : 80070490
    Requested certificates not available in store
    Certificate not found in store. Bailing out!
    Failed to validate certificate
    The certificate shows up under system in the keychain, the only strange thing is it shows for name the user who enrolled in the certificate. I figured it should have showed the system name. The root ca is also there. Any help would be appreciated, thanks

    Okay so figured this out, and i'll post in case this happens to someone else. The certificate will always show under the keychain with a name of whoever the user was that did the enrollment. So if you used Joe Smith, then the certificate will be called
    Joe Smith. In my case the account I used to enroll had a active directory display name of two words such as "Joe Smith" Because of this space in between, configuration manager client kept listing the certificate as "Joe". I was then realized that indeed just
    like the error said the certificate could not be found because its looking for Joe and the the certificate says Joe Smith. The fix was instead do the enrollment with a normal account with no spacing in the name. This may be a bug or Microsoft may not recommend
    creating AD accounts with display names with spaces.

  • Creating certificate profile

    Hi all,
    Please tell me what are the mandatory fields in the creation of profile ?
    what are the diff. config. settings?
    thnx

    Steps in IMG
    Certificate type can be crated for identification, hence you can crate type in img (Quality ManagementQuality CertificatesCertificate ProfileDefine Certificate Types)which you can assign a status profile if required.
    Define a form which you can use the std one
    Define Data Origin and Profile Determination u2013 this I think std can be used unless you want to defer  SAP std. This will help to choose a certificate profile incase if you have more than one for a particular combination
    Transaction
    In QC01 use the certificate type created and enter a name for profile.
    Give the name of form.
    Click on characteristics overview button and enter the details. and then the release the profile
    In QC15 assign the material to certificate.
    Try and come back

  • More than one X.509 certificate was found with the specified parameters

    Greetings All,
    We are getting an error in our application event logs every minute or so and it seems to be causing search queries to fail. Same error is appearing in the ULS logs.
    System
    Provider
    Name]
    System.ServiceModel
    4.0.0.0
    EventID
    3
    Qualifiers]
    49154
    Level
    2
    Task
    5
    Keywords
    0x80000000000000
    TimeCreated
    SystemTime]
    2014-06-25T02:30:12.000000000Z
    EventRecordID
    92894
    Channel
    Application
    Computer
    Security
    UserID]
    EventData
    System.ServiceModel.ServiceHostingEnvironment+HostingManager/63835064
    System.ServiceModel.ServiceActivationException:
    The service '/0c98374520dc4b748d92a1e51b365dce/SearchService.svc' cannot be
    activated due to an exception during compilation. The exception message is: More
    than one X.509 certificate was found with the specified parameters.. --->
    System.ArgumentException: More than one X.509 certificate was found with the
    specified parameters. at
    Microsoft.SharePoint.Utilities.CertificateManager.GetCertificate(String
    storeName, StoreLocation storeLocation, X509FindType findType, Object findValue)
    at
    Microsoft.SharePoint.Administration.SPIisWebServiceSettings.get_LocalSslCertificate()
    at Microsoft.SharePoint.SPServiceHostOperations.Configure(ServiceHostBase
    serviceHost, SPServiceAuthenticationMode authenticationMode) at
    Microsoft.Office.Server.Search.Administration.SearchServiceHostFactory.CreateServiceHost(String
    constructorString, Uri[] baseAddresses) at
    System.ServiceModel.ServiceHostingEnvironment.HostingManager.CreateService(String
    normalizedVirtualPath, EventTraceActivity eventTraceActivity) at
    System.ServiceModel.ServiceHostingEnvironment.HostingManager.ActivateService(ServiceActivationInfo
    serviceActivationInfo, EventTraceActivity eventTraceActivity) at
    System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String
    normalizedVirtualPath, EventTraceActivity eventTraceActivity) --- End of inner
    exception stack trace --- at
    System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String
    normalizedVirtualPath, EventTraceActivity eventTraceActivity) at
    System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String
    relativeVirtualPath, EventTraceActivity
    eventTraceActivity)
    w3wp
    6328
    Doesn't appear to affect the component health status or the crawling process, only the return of search results.
    Sorry, something went wrong.
    Search has encountered a problem that prevents results from being returned.  If the issue persists, please contact your administrator.
    I checked the certificates snapin, didn't see anything out of the ordinary but I have a feeling it goes deeper than that.
    Where can I remove this duplicate certificate? Thanks!

    Open IIS and check server certificates
    Check if there is any certificate applied to Security token service
    Did you used any certificate for web application in site
    Check binding of all web application in IIS
    Try to browse
    servername/0c98374520dc4b748d92a1e51b365dce/SearchService.svc from all servers, check the certificate details
    If this helped you resolve your issue, please mark it Answered

  • QM-How to add a New "Output Format" in Certificate Profile?

    Hello QM Functional Experts,
    Can any of you tell me how we can add a custom "Output Format" in the Certificate Profile (QC01/2/3). I tried the Configuration approach via QM-Quality Certificates-Certificate Profile-Define Data Origin. I do not see an option here to add a New Output Format.
    If this is posted in a wrong forum, I apologize. I am not able to find the correct forum for QM. Please redirect me and I will be glad to post it in the right forum.
    Thanks,
    Nagesh

    Hi,
    You can use the FM ..RV_MESSAGE_UPDATE..
    Thanks
    Naren

  • Change of unit in Certificate profile

    Dear Friends,
    I want to chane the unit of measurement in certificate profile from mg/kg to PPM, but system is showing error as
    "Unit mg/kg cannont be converted to unit PPM"
    Please giude, how to over come this error as I want to change the UOM in COA.
    Regards,
    Amit Shirsath.

    Hi Amit,
    It doesn't seem to be possible.
    May be you need to create another MIC and do the re-assignments.
    Regards,
    Arpit

  • OWA 2013 : An error occurred while signing this S/MIME message. No certificate was found.

    Hi,
    I've configured SMIME (certificate templates, signing/encryption certificate, etc.)
    All users receive their certificate, and in Outlook (2010) everything is working as expected.
    When I use the OWA 2013 however to send an encrypted message, I receive the error :
    "An error occurred while signing this S/MIME message. No certificate was found. If you have a smart card-based certificate, insert the card and try again."
    environment : exchange 2013 SP1, ie 9 and 10
    Get-SMIMEConfig
    [PS] D:\Scripts>Get-SmimeConfig
    RunspaceId                                       : 24178a41-aead-45fc-a4c2-5504b2541e7e
    OWACheckCRLOnSend                                : False
    OWADLExpansionTimeout                            : 60000
    OWAUseSecondaryProxiesWhenFindingCertificates    : True
    OWACRLConnectionTimeout                          : 60000
    OWACRLRetrievalTimeout                           : 10000
    OWADisableCRLCheck                               : False
    OWAAlwaysSign                                    : False
    OWAAlwaysEncrypt                                 : False
    OWAClearSign                                     : True
    OWAIncludeCertificateChainWithoutRootCertificate : False
    OWAIncludeCertificateChainAndRootCertificate     : True
    OWAEncryptTemporaryBuffers                       : True
    OWASignedEmailCertificateInclusion               : True
    OWABCCEncryptedEmailForking                      : 0
    OWAIncludeSMIMECapabilitiesInMessage             : False
    OWACopyRecipientHeaders                          : False
    OWAOnlyUseSmartCard                              : False
    OWATripleWrapSignedEncryptedMail                 : True
    OWAUseKeyIdentifier                              : False
    OWAEncryptionAlgorithms                          : 6610
    OWASigningAlgorithms                             : 8004
    OWAForceSMIMEClientUpgrade                       : True
    OWASenderCertificateAttributesToDisplay          :
    OWAAllowUserChoiceOfSigningCertificate           : False
    SMIMECertificateIssuingCA                        :
    SMIMECertificatesExpiryDate                      :
    SMIMEExpiredCertificateThumbprint                :
    AdminDisplayName                                 :
    ExchangeVersion                                  : 0.1 (8.0.535.0)
    Name                                             : Smime Configuration
    DistinguishedName                                : CN=Smime Configuration,CN=Global Settings,CN=customer,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=customer,DC=com
    Identity                                         : Smime Configuration
    Guid                                             : 1184683a-2fcd-446b-98a6-bf0fb16ca282
    ObjectCategory                                   : customer.com/Configuration/Schema/ms-Exch-Container
    ObjectClass                                      : {top, container, msExchContainer}
    WhenChanged                                      : 17/06/2014 14:21:52
    WhenCreated                                      : 17/06/2014 14:21:52
    WhenChangedUTC                                   : 17/06/2014 12:21:52
    WhenCreatedUTC                                   : 17/06/2014 12:21:52
    OrganizationId                                   :
    OriginatingServer                                : DC1.customer.COM
    IsValid                                          : True
    ObjectState                                      : Unchanged

    Have you set up a virtual certificate collection? Looks like that's new with Exchange 2013:
    http://technet.microsoft.com/en-us/library/dn626158(v=exchg.150).aspx
    http://technet.microsoft.com/en-us/library/dn626155(v=exchg.150).aspx
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • SignTool Error: No certificates were found that met all the given criteria

    I have a project which was developed with VS2010.
    I tried rebuild this project with VS2013 Professional and I got the error messages as indicated in the subject.
    What is this error? Why I got this error?
    Hyung-Ho Kim

    Hi Kim,
    As you said that it is the VS2010 project, so it worked well in VS2010, am I right? If so, which kind of project did you create?
    >>SignTool Error: No certificates were found that met all the given criteria.
    I did some research about it, it seems that it is related to the setup project.https://social.msdn.microsoft.com/Forums/en-US/143a914b-1c45-467f-9827-d38b95db11a1/signtool-error-no-certificate-were-found-that-met-all-the-given-criteria?forum=winformssetup
    Is it the Setup and Deployment project with the InstallShield tool?
    If so, as far as I know we didn't support this tool in VS2013 IDE now, but you could post this issue to this forum here:
    http://community.flexerasoftware.com/forumdisplay.php?133-InstallShield
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • No start profiles found

    Hi,
    I'm getting this error while starting instance on application server.On application server we have 2 instances but getting this error only while starting 1 instance.
    usage: grep [-E|-F] [-c|-l|-q] [-bhinsvwx] [-e pattern_list...]
            -f pattern_file... [file...]
    usage: grep [-E|-F] [-c|-l|-q] [-bhinsvwx] pattern [file...]
    Warning: Could not found virtuell host in ifconfig list
    no start profiles found
    Regards,
    Sam

    Hi,
    Yes,cluster is implemented.
    sapp3p02:p3padm 23> startsap r3 d01 sapp3p02
    usage: grep [-E|-F] [-c|-l|-q] [-bhinsvwx] pattern [file...]
    Warning: Could not found virtuell host in ifconfig list
    Wrong argument(s)
    Usage: startsap [db|r3|j2ee|ccms|all|check] [<instance>] [<virtual hostname>]
           Specify instance if you have installed multiple
           instances of the same system on one host.
    sapp3p02:p3padm 25> stopsap r3 d01 sapp3p02
    Warning: Could not found virtuell host in ifconfig list
    Wrong argument(s)
    Usage: stopsap [r3|j2ee|all|check|ccms] [<instance>] [<virtual hostname>]
           Specify instance if you have installed multiple
           instances of the same system on one host.
           Example: stopsap r3 DVEBMGS00 [cic11]
    still  the same error.
    startsap logs are not updating.They are the same as posted above.
    /etc/hosts have the entry.
    Regards,
    Sam
    Edited by: sam on May 12, 2010 10:39 AM
    Edited by: sam on May 12, 2010 10:42 AM

  • No instance profile found

    Hi all,
    After Kernel Upgrade the following error occurs by starting sap :
    no instance profile found
    Thanks for your help
    Regards

    Hi,
    1. Please navigate to the path where your instance profile is located and ensure that instance profile is available physically there.
    => Profile SID_DVEBMGS00_hostname is physically there under /sapmnt/SID/profile. Start and Default profiles are als there.
    2. Validate that it has proper permission.
    => Permissions are 644
    3. Check the PATH variable of user <sidadm> and ensure that it has entry for the FS location that contails the profile parameter file.
    => Also OK
    Thanks
    Best Regards

  • Problem in certificate profile assignment during QC15

    Dear SAP Gurus,
    1.In Development server while assignment of certificate profile  we can see the combination of Material/Plant.
    2. In production server  while assignment of certificate profile  we cannot see the combination of Material/Plant.
    Can anybody please suggest the solution.
    Regards
    Debjeet

    we have only  three options
    1)material/customer
    2)material
    3)Material Group  where is Material/Plant option i conn't get

  • Mac OSX - Certificate not found

    Hi,
    Is SCCM 2012 SP1 supports Mac OS 10.9.1 version? If yes, do I need to install any updates?
    I have successfully installed and enrolled certificate on Mac OS 10.9.1 verison but when I open Configuration Manager under system preferences, it says ‘Certificate not found’ and
    CCMClient log in Mac machine says...
    Certificate not found in store. Bailing Out! Default 12/26/2013 2:52:42 AM 2954526720 (0xB01A8000)
    Failed to GetProperty Mode from Configuration Provider : 80070490 Default 12/26/2013 2:52:42 AM 2954526720 (0xB01A8000)
    Requested certificates not available in store Default 12/26/2013 2:52:42 AM 2954526720 (0xB01A8000)
    Certificate not found in store. Bailing Out! Default 12/26/2013 2:52:42 AM 2954526720 (0xB01A8000)
    Failed to validate certificate Default 12/26/2013 2:52:42 AM 2954526720 (0xB01A8000)
    OMA : Sending Notification to UI : <CCMClientNotification><Sender>Service</Sender><Name></Name><Id></Id><Type>CCM_OMA</Type><State>Error</State><Data>-2016344009</Data><Description></Description><RebootRequired></RebootRequired><Time></Time></CCMClientNotification> Default 12/26/2013
    2:52:42 AM 2954526720 (0xB01A8000)
    No Preferences found for Key - 'OMAFailureRetryDelayInSec', Domain - 'com.microsoft.ccmclient'. Default 12/26/2013 2:52:42 AM 2954526720 (0xB01A8000)
    and to resolve the above issue need a AD account without space in between (thats what I read in blogs). In this case do I need to uninstall client and certificate? if yes could you please let me know how to unregister certificate from Mac OSX machine.
    Thank you,
    Ramana

    Hi,
    FWIK, I think the Mac OS 10.9.1 is supported by SCCM 2012 R2, you'd better to upgrade to SCCM R2 to get supported.  
    Also, take a look in the blog below. There is a way to upgrade the certificate.
    http://blogs.technet.com/b/configmgrteam/archive/2013/12/16/mac-os-x-10-9-support-for-sc-2012-config-manager-clients.aspx
    Juke Chou
    TechNet Community Support

  • QM layout set QM_QCERT_01 for certificate profile

    Experts,
    I'm creating a certificate profile in QC01 and I want to assign form QM_QCERT_01 as a layout set. It's the standard SAP form for the quality certificate.
    But I get the error message: "Text QM_QCERT_OFF_SPEC_TEXT not available for layout set QM_QCERT_01" (Message no QC 094).
    Diagnosis: In the form QM_QCERT_01, a reference exists to text QM_QCERT_INSPECTION_METHOD (text ID ST, language EN). However, this text is not available in the current client. This may be due to one of the following reasons:
        o  The text is only available in the original client.
        o  The text is not available in either the original or the current client and should therefore be created.
    System Response: The text cannot be evaluated while the certificate is being created. Information and logical queries could be lost for this reason.
    Procedure: Check your entries in form QM_QCERT_01. If required, create the text QM_QCERT_INSPECTION_METHOD.
    If the text is only available in the original SAP client, copy it in all languages (if necessary) from the original client to the current client. To do this select Tools -> SAPscript -> Standard text -> Utilities -> Copy from client.
    How do I check if the text is available in the current client? How do I add or create the missing text?
    Thanks. Rgds

    If you are not sure then you can copy the std form and text in SPRO>QM->basic settings>
    Transfer QM Standard Texts  
    Transfer QM Forms.
    hence from 000 client this will be copied and then you can check it once again..if still problem persistis then it is sure that it is not available in std sytsme and you need to talk to ABAPer to cretae a text element  QM_QCERT_OFF_SPEC_TEXT .
    This may be created in your client and assigned to layout...just check

Maybe you are looking for