No CFP interface shows in the N7K
Recently we installed a N7K-M202CF-22L card in the Nexus 7010 switch.
The card seems to be good but we cannot find any CFP port by use the command "show int status"
The software version is 6.1(1).
Any body knows what's wrong with it ?
The attached is the output of the follow command.
1) show int status
2) show inventory
3) show version module 2 epld
Does the card need special configuration?
Hi Sol72,
I'm sorry you're having this problem, but I have a few things that should be able to help you. One advantage in using the iPhone with your printer is the availability of the AirPrint feature that will let you print from the phone without needing the ePrint app. You can find information about using AirPrint with our printers here.
Let me know if this helps, or if you're still having problems printing from your iPhone.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.
Similar Messages
-
Service Interfaces not showing in the IP when imported in ID in PI7.1
HI Experts,
I have developed an Integration process(IP) in ESR using some Service interfaces and Operation mapping for implementing BPM.
I am trying to import the IP into my Integration Directory. But the imported Integration process(which is now as good as a Business Service) does not show the Interfaces i have used in the BPM in the ESR.
Without the interfaces being attached to the IP, i cannot create RD and ID's.
This is the first time BPM is being configured in this server.
Please guide me if there are any settings specific to ccBPM to be done in ECC.
Please help me resolve this issue... i am in a crictical condition to meet the deadline..
Thanx in advance,
NandanHi Neetesh,
Thanx for your reply. If there are any initial settings to be done in PI, please list them so that i can check if they exist in our system.
Also,when i check(f7) my IP , its showing a message that " Container element my_interface in step Send1 is initialized but is not used ". Is this a concern ?
I have copy pasted my interface names in the RD and InterfaceDtrmn in my ID and completed the ID part of configuration.When i test the BPM by triggering my Purchase Orders from my sender service,it is showing the following error in moni:
"<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack> " in error section and in TRace its showing this error:
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
<Trace level="1" type="T">could not create BPE proxy for message, no XML object definition found for message 70126C4C0C4D0B11E1000000AC113034</Trace>
</Trace>
</Trace>
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
Please suggest how these can be resolved???? -
I'm downloading a movie to each of my kids new ipads. it says that it's downloading, but the completion % has shown the same % since it began 2 hours ago. is this normal? one shows 94%, the other 24%. how do I know if it's progressing?
You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
Once you are using the "Firefox" button ...
Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface -
MPX 2.1.1.2 SSL Certificates doesn't show in the web administration
Hey guys,
I've uploaded SSL certificates to my MeetingPlace Express installation and I got the error showed in the attached file. "Display Certificate" via the web interface doesn't show anything but under CLI with SSLUtil command I can see that the certificates are actually generated in the system.
Currently the certificates are actullay working when I access the meetingplace via web but I don't have any administration control over them via the web administration. Rebooting the server doesn't help. Anyone experienced similar issue?
Regards,
VladimirCorrect it did work in 1.5. on .sql files, when connected, so I have updated the ER to bug. We also need to expand this to support PL/SQL files.
Sue -
Solaris 8: Multiple primary interfaces connected to the same network
I have a machine with Solaris 8, and it has multiple interfaces that are connected to the same network which means they all have metric 0 (1 hop) to the default gateway.
assume:
e1000g0: 192.168.30.70
e1000g2: 192.168.30.72
e1000g4: 192.168.30.74
e1000g5: 192.168.30.76
gateway: 192.168.30.65 (Cisco Router)
However, it seems like despite the fact that they have a direct connection, they seem to be using e1000g0 to access the 192.168.30.0 network to get to the default gateway and then to anywhere else.
When I send a ping to say, 192.168.30.74 (IP of e1000g4) and capture packets on e1000g0, I see the "echo reply" messages going out of it as opposed to e1000g4 even though e1000g4 is the one receiving the "echo request". This should not happen and these should be completely independent as they should all be advertising a 1 hop to that network
The outputs from netstat -rn and ifconfig -a are shown in the picture on the link below
[http://img836.imageshack.us/img836/7308/ifconfignetstathiddenip.jpg]
This gets even more confusing when I go into the Cisco router and run the command: "show mac address-table" where only the MAC address of e1000g0 is shown for the switch port it's connected to, but not for the other interfaces which are connected to the switch. Yes, all ports are active (no shut) and are pingable.
Also, the odd thing is that ALL of these individual MACs show up in the router ARP table when the machine comes up, however after sending a ping to one of them, after a certain expiry or whatever period, the MACs disappear from the router ARP table and only the MAC for e1000g0 shows up. The arp table of the solaris machine however shows all the relevant MACs of each port of the router that it's physically connected to (This is actually a Cisco Switch with the advanced IP services imagine and L3 routing turned on)
Before anyone asks: The setting local-mac-address? setting does NOT exist in my machine and it never has, but it used to work fine. Also, from the ifconfig command, once can tell that all the MAC addresses are fine.
I need to somehow assign all these interfaces equal priority and make them understand that they're physically connected to the 192.168.30.0 network and there's no need to go through e1000g0 to get to it.
This is causing a lot of problems as eventually all traffic will end up going through the e1000g0 interface and that will become a bottle neck.
Please help Thanks in advanceOk thanks. That was a useful response.
I did think about the trunking software that is claimed to be available for Solaris 8, but it's only available if you've got paid support contract. Oracle came and ruined everything re: Sun support which is so expensive now.
The other confusion is, we never had that OR needed to configure trunking/link aggregation on this machine, so why now?
Lastly, by your explanation, this should be expected and is "normal" behaviour, which would mean that this machine was always doing this and I only just noticed it this time? I thought if you turn off ipv4 forwarding and router function in the machine, it's every interface for itself. But it's not doing that :(
So then the question is, Can I force it? I've tried a bunch of things by manipulating the tables and it seems to mess things up where nothing is getting through or it now shifts all the traffic to some other port make the problem no different
Is there a way to give equal weight to all interfaces for the traffic to go directly through them that is originating at those ports? -
Aperture does not show all the transition effects in slideshow
Hello,
I am making my first slideshow in Aperture since I thought it would be better than iphoto.
Finding it not as intuitive as I expected, have to say.
I want to control how each transition between the slides works, but when I get the inspector ( and even that wouldn't appear - I had to troubleshoot it, reboot and change the displays then set up a dummy slideshow to even get that to appear ) - there is only two options on each slide - default and selected slide, and even then I can only change the background colour and the "photo effect" to black and white - the options that show on the manual are not there.
I thought it might be because I was still using the Trial Version of Aperture, so I changed libraries and import the slideshow - only 1 photo appeared and still no options to change anything. Try again ... ok, now the photos are there but I have the same options as before - i.e. none. I tried to change the theme to Ken Burns and NOW the options appear, but does that mean you can only change the slideshow options in this theme and none of the others?
And I also can't figure out how to import a video onto the end of the photo slideshow ... When I have the slideshow screen up, there is no other option availabale ( that I can see ) to impot a video .. I'm starting to think imovie is the only way to do this?
Can anyone suggest anything ??
Thanks,
MYou'll want to check the status of the delivery - if it's waiting interfaces, you could have an inventory interface issue or possibly interface trip stop hasn't run. You can also check the workflow of the particular line to see what step is is stuck at.
-
How do you get you`re back ground to show on the hole page?
how do you get you`re back ground to to show the hole pict. not just the top part of it?
If you are referring to a persona then a persona only covers the use interface part with the toolbars and not the browser part that shows the web pages.
* https://support.mozilla.com/kb/Using+themes+with+Firefox
Add extra empty toolbars if you want to see more of the persona.<br />
You can create extra toolbars to get extra space via View > Toolbars > Customize<br />
You have to put something on a toolbar (drag a Space item onto it) before closing the Customize window because empty toolbars are automatically removed.<br />
See http://kb.mozillazine.org/Toolbar_customization -
Tried to upgrading ipad 1 from itunes and l guess it did not complete the process because all I have showing on the ipad is the itunes logo with the usb cable. When l try to connect it to my system, it resquest that a driver be used to install the device. Please help! How do I restore?
Restoration is relatively simplistic. Here's whatcha do. Plug your ipad in, open itunes, now if itunes doesn't recognize it then you may have a problem, anywho, click on the ipad in the devices interface and go to the info tab, click restore, and it'll be just like it was when it left the factory. To get you data back, it should ask if you would like to use a backup, just select the backup you want and you'll be good to go. That is if you regularly backed up your iPad.
-
When I login to Horizon View, it shows me the list of desktops to connect to. If I'm entitled to only one desktop then can View auto connect me to that desktop instead of me clicking on Connect.
Yes you certainly can.
Right click any desktop in the list > Settings > in the left pane select the desktop you want to auto connect to > check "Auto connect to this desktop". -
How can I get ALL of my Google Calendars to show on the iCal on my iPhone?
I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.https://www.google.com/calendar/iphoneselect
-
i have itunes on a mac with 2 users but the library only shows on the main user how can both users have the same library?
Hi,
Have a Look at these Links on Home Sharing:
http://support.apple.com/kb/HT4620
http://support.apple.com/kb/HT3819
Could be what you need...
Cheers, -
I have 3 iTunes libraries on my one one computer and since I updated to the new version I can no longer see who's library I am in. It used to show at the top of iTunes the name of the library I was in. Is there a way I can tell which library I am in without closing and reopening?
No. Frequently the apps take up more storage space on the iPod that the file download size.
-
Most of the songs on my iPod Classic no longer show up on iTunes on my laptop. I deleted iTunes & installed the latest version but this did not change anything. For example on 1 playlist I have 66 songs but only 1 shows on the iTunes screen. Thanks you for any help.
See Empty/corrupt iTunes library after upgrade/crash or
Recover your iTunes library from your iPod or iOS device.
tt2 -
The billing doc is not showing in the order documnet flow in SAP CRM 7.0
Hi CRM Experts,
Our CRM system has been upgraded from 4.0 to 7.0 recently.
We have come across with one strange issue; for some orders which are billed in ECC6.0 are not showing as next document in the CRM order under document flow in SAP GUI. Only preceding document and replicated document are showing in the CRM document flow.
Appreciate for yor valuable solution at the earliest.
Best Regards
SucchiI have the same problem!!! Did anyone solve this???
-
I just upgraded to 11.1.4.62 and now my iTunes won't recognize my iPhone 4. The device never shows in the menu bar
Hello there.
The following Knowledge Base article provides some great, in-depth steps for troubleshooting your issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.
Maybe you are looking for
-
"couldn't update this book because it contains no openable nongenerated files"
I need help with an error message "couldn't update this book because it contains no openable nongenerated files" when trying to create a book in Framemaker 12. Not sure what is happening but I am a new framemaker user so it could be operator error.
-
This iMac is running 10.4.11 and I would like to update it. The packaging on my Snow Leopard disc from a more recently purchased MacBook says it does not support PowerPC chipset machines. Can't find much info about 10.5 and it is not offered on the M
-
I was suffering on getting .webloc files open on my Windows PC. I found a thread http://discussions.apple.com/thread.jspa?messageID=7244343 but it was archived, so I couldn't reply no longer to it, but I noticed that it was never solved. Since I didn
-
How do I stop firefox 29 from checking compatability of addons at every start.
Firefox 27 started checking addon at exery start. Then wanted to delete third party addon ubuntu modification that is used by ubuntu to check for updates. Went to Ubuntu software center and deleted Firefox. Restarted Ubuntu 12.4 LTS reinstaled Firefo
-
Identity Management Self service reset
Hi Everyone! I had implemented an Identity Center 7.2 for internal training, linking both abap and java satellite systems and all works fine. However after performing initial load and the creation of edit authentication questions task, users aren't a