No change log is created when updating the customer master using LSMW

Hi Gurus,
     I am a bit confused on why no change log is created when I use the LSMW to update the customer master. What I update is the customer partner of the customers. For example I have a sold-to 1000 then a customer representative (Z3) 50001, now when I use the LSMW to change the customer representative to 50002 it is correctly updated however no change log is found if you check for the changes on that specific customer. This is a bother for me since I want to send all the customer changes through IDOC and the processing needs to access the change log.
Thank you.

Hello,
What process are you using object, BAPI, etc.
Regards
Waza

Similar Messages

  • Unable to create or update the Custom Data Provider WIS 10853

    Hi,
    I have created the universe in designer then I created QAAWS. In the web intelligence tool, clicked for new document and then chosen web services under other data sources. After giving webservices detailed, I encountered the following error.
    Error from Personal Datasource : Unable to create or update the Custom Data Provider: invalid information retrieved while trying to get the structure. (CDS 105109). (WIS 10853)
    Can anyone help abt this problem? I wud very thankful for them.

    Hi,
    Can you post the wsdl URL. It would be of great help if we could have a look at the wsdl schema. Not all schemas are supported at the moment and hence the error. You can have a look at the limitations section in the documentation guide.
    Regards
    Rahul

  • I want to update the Custom table using the data available in ITAB.

    Hi,
    I want to updaste the Custom Table which is created by me (Ztable) using the data available in itab.(which i got from defferent standard tables)
    I want to update the custom table using the itab data How is it possible?
    Is any possible by using Modify ?
    DPK.

    example here
    modifying datbase table useing internal table
    advises before updating this datbase table plz lock that table to avoid incosistency
    write the logic for modifying
    Modify the database table as per new dunning procedure
    MODIFY fkkvkp FROM TABLE lt_fkkvkp .
    and finally unlock the table
    example
    *To lock table for further operations
    constants: lc_tabname TYPE rstable-tabname VALUE 'FKKVKP' . "FKKVKP
    CALL FUNCTION 'ENQUEUE_E_TABLE'
    EXPORTING
    tabname = lc_tabname
    EXCEPTIONS
    foreign_lock = 1
    system_failure = 2
    OTHERS = 3.
    IF sy-subrc EQ 0.
    To fetch all the contract accounts for customers of the segment
    Households/SME.
    PERFORM fetch_contract_accounts using lc_tabname .
    ENDIF. " IF sy-subrc EQ 0.
    *wrote the logic
    Modify the database table as per new dunning procedure from internal table
    MODIFY fkkvkp FROM TABLE lt_fkkvkp .
    *unlock the tbale
    CALL FUNCTION 'DEQUEUE_E_TABLE'
    EXPORTING
    TABNAME = uc_tabname .

  • Workflow  keying off changes in the customer master

    I have created a workflow that triggers  off of changes to a particular field in the customer master.
    Everything works great.. However, users are requesting to see the old value as well as the newly changed value.
    The event container doesn't seem to hold the previous changed value, only the new one.
    It does have have the object key and the event time and date.The only option I see is to have my custom method go back and read the change doc table (cdhdr & cdpos) in and around the event time for the object key ( kna1) to retrieve the old value.
    Any suggestions are appreciated.

    Hi,
    The address data is always saved with the dates (look in table adrc). SO maybe you can retrack the original address.
    Why do you print again an invoice. And if you do i think it is alright when it is sent to the current address and not to the old address.
    Gr., Frank

  • How to update the Customer field value of PO Item under the Delivery Address Tab?

    Hi Friends,
         i tried to update the Customer field Using Bapi_PO_change.I passed the PO Order no,POADDRDELIVERY data with Item no,Adrees no,Customer no.But i am getting no data changed message from return table.I attached the screen shots.So please suggest me the helpful information for resoving this issue.
    Thanks,
    Dinesh

    Thank you friends,
                My Problem was resolved.In my case i have passed the customer value in BAPI_PO_CHANGE POITEM Table with updated customer value.
    Thanks,
    Dinesh

  • Send email for approval before update of customer master

    i have to update the customer master XD02 or FD02 and then i have to sent mail to an external system for approval .How to send this mail while saving the transaction XD02 or FD02 is there any Badi or exit by which i can add this functionality.please suggest .
    Thanks in advance.

    Hi,
    Just activate SQL Trace before u run your transaction. After running the transaction you can check the log in sql trace. There u can find if any BADI or Exits are called.
    Regards,
    Renjith Michael.

  • HT5621 I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully und

    I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    1. You don't own another Mac.
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    2. You do own another Mac.
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
    3. Other issues
    If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
    If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

  • Any BAPI or FM to use to update the Customer Address with change log?

    Hi, does anyone have used any BAPI or FM that will update the customer address (Central Address management fields) and the change will be logged in the change history of customer master? I have tried several FM that can update the fields but none of the change will show up in the change history of the customer master.
    So far, I have tried the following FM:
    ADDR_MAINTAIN_COMPLETE
    ADDR_UPDATE
    BDC is not acceptable due to high volume of data. However, the change log is also required.
    Please share any advice.
    Thank you,

    Hi Minami,
    for chenge address use FM : BAPI_BUPA_ADDRESS_CHANGE       (SAP BP, BAPI: Change Address)
    otherwise check with below FM ,for address related information
    BAPI_BUPA_ADDRESSES_GET              SAP BP, BAPI: Determine All Addresses
    BAPI_BUPA_ADDRESS_ADD                   SAP BP, BAPI: Add Address
    BAPI_BUPA_ADDRESS_CHANGE                 SAP BP, BAPI: Change Address
    BAPI_BUPA_ADDRESS_GETDETAIL             SAP BP, BAPI: Read Address
    BAPI_BUPA_ADDRESS_GET_NUMBERS    SAP BP, BAPI: Read Address Numbers
    BAPI_BUPA_ADDRESS_REMOVE                    SAP BP, BAPI: Delete Address
    Regards,
    Tutun

  • RPLDAP_EXTRACT - Error when updating the LDAP directory

    I am connecting SAP IdM 7.0 to SAP HCM via VDS.
    So far:
    The VDS responds to LDAP browser, the connection tests from SAP GUI are succesful.
    I can execute my copy of the standard report LDAPEXTRACT46C in SAP GUI and can see what data is exported.
    I get the "Error when updating the LDAP directory" error when trying to execute the RPLDAP_EXTRACT program.
    An error occurred during creation of one or more data records in the LDAP directory. The error has been logged in the system used to export data to the LDAP directory.
    You can find logs in the database tables TLDA_LOG (HR-LDAP: Non-Exported Data Records) and TLDA_MSG (Error Messages About Data in Table TLDA_LOG). Table TLDA_LOG contains data records that could not be exported; table TLDA_MSG contains the corresponding messages.
    I didn't see anything that makes sense in tables mentioned in the error message above.
    I have some questions as the documentation supplied with IdM is bit brief; According to the configuration guide I don't need to have any mapping in VDS like "conversion of internal attributes" or "conversion from internal attributes", has anyone else entered the mapping in VDS?
    Any pointers in going forward?
    Edited by: pasikuikka on Oct 20, 2009 11:01 AM

    Hi Pasikuikka,
    just a few questions:
    Have you checked TA HRLDAP_MAP? (Each field must have its expression in the LDAP-Target)
    Have you checked TA LDAPMAP? (Each field must have its expression in the LDAP-Target)
    Maybe there are attributes listed in the query, but not in the HCM-Staging-Area in the Identity Center.
    Have been new attributes created in the HCM-Staging-Area and, if so, are they connected to the right Entry-Type (MX_HCM_Employee or something like that)?
    Hope this puts you on the right track.
    Kind regards,
    Achim Heinekamp

  • Craches when updating the Outlook Calendar to iPod

    iTunes craches when updating the Outlook Calendar to my iPod.
    Where can I send the debug reports?

    AppName: itunes.exe AppVer: 6.0.4.2 ModName: unknown
    ModVer: 0.0.0.0 Offset: 35f769b8
    hmmmm. this is looking like a program conflict of some kind on the PC.
    let's try getting a DrWatson log for this one and sending it to someone who can interpret DrWatson logs.
    Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
    drwtsn32 -i
    And hit return.
    This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
    prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
    generate the crash, collect the crash log, and send it to this email address
    in the email:
    (1) state the precise version number of itunes that you're using.
    (2) state your ipod updater version, ipod model, and version of the ipod software on the ipod:
    Identifying different iPod models
    iPod: How to find software version
    (3) include the URL to this thread so that the person who gets the email has some context, but also give as much information about the context of the crashing as you can.
    love, b

  • I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error.

    I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error. I must to force quit iphoto window. There are any fixed bug update.

    If you have no photos:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library' and start.
    Regards
    TD

  • Unable to create or update the Excel Personal data provider in Web Rich

    Hi All,
    Iam getting the below error message ,when iam using Excel as personal data provider in WEBI Rich Client.
    "Unable to create or update the Excel Personal data provider in Web Rich Client Cannot open the workbook WIS:10872"
    Please suggest a solution ,it helps a lot..
    Regards
    Mahesh

    Hi,
    Was this issue resolved? I see this post has been marked answered but there wasn't any information on what it took to resolve the issue.
    We have our CMS and processing servers on Linux while our Scheduling servers are on Windows. The WEBI reports with external data providers fail to run on Infoview/ scheduler.
    We were told this is addressed in FP 3.6 but that is not the case. We installed FP 3.6 but still continue to see these errors. It required us to manually deploy the ExtensionFactoryService package for enabling the refresh of such reports on infoview/schedulers. It also involves placing of the file used [.xls/.txt] on the linux server on the PersonalDPFiles directory.
    No luck so far!!!
    Any help would be greatly appreciated!
    Thanks
    Avinash

  • HTTP logs not created when using software load balancer

    This is my setup:
    1. I have a server running a software load balancer - call it A
    2. There are two servers clustered under A - call it X and Y
    3. I am able to access the application deployed on X and Y through A.
    Fail-over also works. Shutting down X when the application is up and running routes the requests to Y and vice-versa. All is well until this point.
    Problem is:
    Let us take server X.
    $ORACLE_HOME/Apache/Apache/logs does not have an access log in it. (It
    however has an error log.)
    Access logs are not created when accessing the servers in the cluster (X and Y) through the load balancer URL.
    However, when accessing the individual servers in the cluster (with their URLs), access logs are created.
    Specifics on the setup:
    1. A, X, Y - all three are OAS 10.1.3.2
    2. All three are deployed on individual server machines
    3. All three servers have one OC4J instance each running in them
    4. The software load balancer used is from WebLogic 8.1sp5 - basically to create a *.war file that has the details of X and Y (servers in the cluster)
    5. This *.war file is deployed on A
    6. Server A, the one that has the software load balancer, DOES NOT have AS control. One of the other servers in the cluster does.
    Has anybody encountered this problem before? Or is there anything wrong
    with the setup? What is the resolution for the same?
    Any help is greatly appreciated.
    Thank you.

    Thank you, Jacco. You are right in saying that the software load balancer does not route the request to Apache and hence the logs are not created.
    While the logs are not critical to the component we are working on, was just wondering why they were not being created.
    As regards your comment on FastCGI, there is a FastCGI directory created under $ORACLE_HOME/Apache/Apache/logs - but there is nothing in it. Neither do the error logs have any information pertaining to FastCGI.
    Anyway, I am not going to worry about this issue anymore - may be sometime in the future will try to use a different software load balancer and see if it makes any difference.

  • Upgraded to 10.3.1.55, now can't set iT as default player,"An error occurred when updating the default player for audio files types.  You do not have enough access privileges for this operation." How to fix?

    After I upgraded iTunes, iTunes doesn't recognize CD in the drive, apparently isn't the default player.  It won't let me set iTunes as the default player, I get the error message "An error occurred when updating the default player for audio files types."  I tried Whitesides' remedy (changing Read Only status in folder in Windows) but it didn't solve the problem.  Any suggestions?  Thanks.
    J

    Oddly enough. I think I just solved it. It looks like, for some reason, my computer has about 8 different "iTunes music" folders, and I've been saving my music to the wrong one. Neat. Music now imports and plays as it should. Copying things over is going to be so fun tonight!

  • I am creating a web form from a template and I need to change a field. It is just a text field at the moment but I need to change it to a field that the customer can fill in. How do I do this?

    I am creating a web form from a template and I need to change a field. It is just a text field at the moment but I need to change it to a field that the customer can fill in. How do I do this?

    See this thread:
    http://answers.acrobatusers.com/Is-add-instructional-text-text-field-disappear-clicked-q19 5078.aspx

Maybe you are looking for