No change of Quantity in ATP report for Return Purchase order

Hi,
There is an issue with ATP report. We have a customised report for ATP, the quanity is not changed in the ATP report for the return Purchase Order.
Will there be ATP carried out for the return purchaser orders.
Regards,
Jagadish

hi,
this is to inform you that,
i think when goods are going from the company at that point of time ATP check it will do then when goods coming in to the company in form of returns at that point of time you dont need ATP check.
any how sit with ABAPER and debugg the program because if you are getting any values into Retuns ATP field.
that might be the issue with your requriment.
regards,
balajia

Similar Messages

  • Change Movement type 161 to Z61 for Returns Purchase Order

    Hi All,
    I have a requirement wherein the GOODS ISSUE against the Purchase Order with the returns flag (returns Purchase Order) should call out or post with a different movement type (ex. Z61) instead of the standard 161.
    Further, it should also update the PO history with the movement type Z61, and create a Credit note with reference to PO / Goods Movement document.
    Is there any standard setting for this in standard customization??? If yes, what would be the setting??
    Also, as this is going to be background transaction (and not the MIGO or the VL10B) based on iDoc. So can there be a possibility to use the new movement type Z61, and then updating the PO History and further Post the Credit note based on this Goods Movement in Background? Any idea on how to do it on a high level would also help.
    It would be really helpful if I could get the reply at the earliest.
    Thanks and Regards,
    Ankush

    Dear Ankush,
    This can be done in standard way, kindly copy the 161 movement into Z61 and we have done the same for one of our project with 961 movement and it got updated in PO history.
    Regards,
    Karna J

  • Report for released purchase order

    Hai guru's
    this is second time but i did't get any good replay please consider this, i want any standard report for released purchase order,means(i released two backdated po today next day i verify the report ME2n,those po are not display, the system take only document date not released date, now i am using CDHDR through this i got the report. but it is big process, so once check this and send your valuable solution.
    Prasad

    Hi Krishna,
    You could use Me2N with the dynamic selection coupled with normal selection screen.
    In Dynamic selection(3rd icon in screen).....you can select for which company code, release indicator as released....and save it as default variant.
    hope this should solve your query
    Sk.

  • How to prevent Output to be generated for Return Purchase Order.

    Hi All,
               while creating a return Purchase Order the output is getting triggered. Now for Return Purchase Order the business does not want the output to be generated.
    So is there a way by which we can have the automatic output generated for normal Purcahse Order but not for Return Purchase Order.
    The system uses standard Output Type NEU for message. And condition record maintained for generating output (print/email) while saving.
    Is there a way by which this issue can be addressed.  if so how ?
    Thanks.

    Dear all ,
    a material goes storage location to client  through pr ,in client site i get faulty material
    i want to retorn that to my plant or storage location
    that basis how to make retorn po and what are the procedure ?
    what is movement type ?
    Regards
    shiv

  • BED,ECS and SECess value not defaulted in J1IS for return purchase order.

    1)I have created return purchase orde for an excisable material.
    2) In the purchase order i am able to view the BED,ECS and SEcess values.
    3) I have created MIGO, for the return purchase order with excise as part 1 only.
    4) While doing J1is or the 161 material document number, the BED, ECS and SEcess values are not defaulted.
    Kindly help me to solve this issue.
    Regards,
    jayakumar

    Hi,
    Check the settings in
    Tax on Goods Movements  --> India --> Account Determination
    Specify Excise Accounts per Excise Transaction - Check for ETT OTHR
    OTHR          CR Credit     PLAAED PLA AED account
    OTHR          CR Credit     PLABED PLA BED account
    OTHR          CR Credit     PLAECS PLA ECS Account
    OTHR          CR Credit     PLASED PLA SED account
    OTHR          CR Credit     RG23AED RG 23 AED account
    OTHR          CR Credit     RG23AT1 RG 23 AT1 Account
    OTHR          CR Credit     RG23BED RG 23 BED account
    OTHR          CR Credit     RG23ECS RG 23 ECS Account
    OTHR          DR Debit     MSUSP CENVAT suspense account
    also check for Specify G/L Accounts per Excise Transaction
    Regards,
    Vikas Mayekar

  • GTS block for return purchase order

    Hi,
    Our ERP system is integrated with GTS system. After creating a return purchase order in ME21N the order is blocked on 'Sanctioned Party List Screening' and 'Legal Control'. However, it is still allowing to create return delivery with movement type 161 in VL10B even if the GTS block is not released.
    We need to build control to stop allowing to create return delivery if the order is blocked in GTS. Is there any standard way of controlling this or we have to custom develop it? Kindly guide me on how to achieve this.
    Thank you,
    Ranjith

    Hi,
    VL10B- is the PO due for delivery.
    Find the standard process for VL10B
    Stock transport order is also a  Purchse order type only When you do STO via SD Route (via delivery.picking, pgi etc) then Shipping tab must appear in your PO Then only it is possible to do via SD Route For shipping tab to appear in PO there are some necessary configurations to be done in SPRO This is done under img- -purchasing- -set up STO 1.Define shipping data for plants 2.Create checking rule 3. Define  checking rule 4.Assign delivery type and checking rule 5.Assign doc type,one step procedure and under delivery tolerance These five are important activities Enclosing here with a model settings study this and understand and then configuration will be more easy Sales area 0003, 04, 21 plant is 1002 Sales area 0004, 05, 21 plant is ABCD If you transport material from 1002 to ABCD plant then 1002 is supplying plant and ABCD is receiving plant Now this ABCD plant should be made as a customer in XD01 mainly with shipping conditions in that data in sales area 0003, 04, 21 and this internal no has to be noted In STO the receiving plant is being made as a customer in the supplying plants sales area and the internal customer no has to be assigned In- -mm- -purchase order- --define shipping data for plants Now in that img activity that i mentioned above against plant 1002 you have to give sales area as 0003, 04, 21.
    Ashish

  • Report for open purchase order quantity

    Dear experts,
    Is there any report for showing open purchase order quantity for which goods are not yet received?
    Regards
    babu

    Hi
    ref the blw link which will have the complete sap std reports
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/erplo/sapStandardReports

  • Report for Open Purchase Orders

    how to develop a report which lists all open purchase orders for given period & plant ? plz idoint want coding .. but give me guidlines & suggestions to develop my own  plz tell where could i nstart & end for this report help me sdn
    Edited by: Alvaro Tejada Galindo on Jun 5, 2008 11:32 AM

    Either you can use ME2N with selection parameter WE101 & Scope of list BEST
    or
    Go to SE16
    Use Table EKPO
    Use Filed name ELIKZ
    If you give X list of all the delivery completed items.
    If you leave blank list of all Open PO items will display.
    Report  showing the open Purchase orders
    <REMOVED BY MODERATOR>
    Edited by: Alvaro Tejada Galindo on Jun 5, 2008 11:32 AM

  • Report for Open purchase orders that contain deleted preqs

    Hi All,
    Is there a way to list purchase orders that may contain purchase reqs that have been deleted after PO creation?
    Cheers,
    Harry

    Hi,
    The PRs are being deleted by other persons, mainly the originator, and by closing off work orders that the PR would be associated with.
    The POs are still active, although quite old.   I am hastening all PO that are active against the vendors to ensure supply of the goods.
    I am seeing quite a large number of POs with deleted/closed PRs.  Thus indicating there is no longer a demand for the items on the po.
    If i could run a weekly report to show POs with deleted PRs. I could liaise with the originators to confirm their requirement before hastening against the vendor.
    Cheers,
    Harry

  • Interactive report for vendorwise purchase order details

    Hi Experts,
      I am trying to create vendor wise purchase order interactive report, if  i click any of vendor detail it has to call display vendor screen for selected vendor or if i click any of purchase details it has to open purchase order details..
    can any body explain...

    hi arun,
    use at line-selection
    example,
    at line-selection.
    if sy-ucomm = 'PICK'.
      if wa_lifnr is not initial.
        set parameter id 'LIF' field wa_lifnr.
        set parameter id 'BUK' field wa_bukrs.
        set parameter id 'EKO' field wa_ekorg.
        call transaction 'XK03'.  endif.
      if wa_ebeln is not initial.
        set parameter id 'BES' field wa_ebeln.
        call transaction 'ME23N' and skip first screen.
      endif.
    endif.
    Regards,
    Logan

  • Report for Unpaid Purchase Order

    Dear guru,
    Is there a standard report for display unpaid PO?
    The report can display :
    - PO Number
    - PO Item
    - Vendor Account
    - Total Amount
    - Unpaid Amount
    - Paid Amount
    Thank you.

    Dear,
    I just tried to dig out the standard report and was able to conclude that you can view open PO status w.r.t payments in FBL3N. For that proceed as under
    1.. extract list of all GRIR clearing GLs.
    2... go to Fbl3n, paste these GLs and make their variant
    3... Execute report. You will see thousands of line items. Just tick assignment and apply subtotal function on this
    4.... Collapase this field.. In assigment now with the help of document type RE ( INVOICE) and WE (Good Receipts)you will b able to see the list of PO which have been invoiced to date RE but not paid by FINANCE. For meeting other requirment you can get abaped report developed.
    Regards

  • Interactive ALV report for vendorwise purchase order details

    Hi Experts,
    I am trying to create vendor wise purchase order interactive report, if i click any of vendor detail it has to display vendor details in a popup window or if i click any of purchase details it has to display purchase order details ina popup..
    can any body explain by using function modules REUSE_ALV_POPUP_TO_SELECT and REUSE_ALV_FIELDCATALOG_MERGE...

    Check the link below will be of some use to you.
    http://www.geocities.com/mpioud/Z_REUSE_ALV_POPUP_TO_SELECT.html
    Regards,
    Murthy

  • Can we have -ve freight value for return Purchase order

    Hi All,
    we have a scenario for returns PO where we need to reverse the freight.
    Please suggest if SAP supports this in standard,
    We tried to influence it though condition routine, but the value get updated in table KONV without negative sign.
    Please suggest.
    Thanks and regards,
    Vithalprasad

    Dear Umakanth,
    I'm actually struggling to solve this issue that you've discussed here. Because the vendor is agreed to allow us to reclaim the freight charges. Our user is requested to show the "freight charges return" in the "PO return". I've tried couple of ways to work on the condition type. But, it doesn't give me what I wanted. e.g. The amount for the cost of material to be returned is $100 and the freight charges is $20. We are actually expecting to have the PO return's total net value at $120 instead of $80. However, no matter how I tried, the system either give me $80 or if I managed to enter and got the value at $120-, but the system will throw me an error message of "PO item does not accept any negative value for delivery cost".
    What should be the right way or the best practice to handle this issue?
      1. Shall I enhance any specific characteristic in the condition type? or;
      2. Shall I create another PO line item purely for the freight charges (reclaim)? If so,  
          shall I post to item category "K"? or;
      3. Shall I let the FI to handle the credit memo manually (meaning the freight charges do 
          not capture in the PO return at all)
    I'm so sorry to disturb you via your email. However, I'm new to this forum and I finally found your valuable recommendation to one of this question. I do need more info on your suggestions urgently.
    Thank you so much for your time. Appreciated.
    Regards,
    Edwin Fu
    [email protected]

  • Report for vendor Purchase order

    Hi
    my Client requirement is when they enter PO.no,or by any means, they must get the report of Open Quantity, posted GR quantity, finally invoiced quantity of PO.
    Do we have any Std, in SAP ???
    regards
    imran

    ME2L is a quick report which may suit for your demand.
    please check.
    by the way, ME2L is the report per vendor.
    if you want per material, please use ME2M.
    and in the report list, you can select lots of fields you need.
    Edited by: JiQing Zhao on Oct 19, 2010 6:26 AM

  • How to configure ATP check for "create standard order in SD (OR type)"

    first, I had check my stock, I only have ten PC
    , but when I enter 100 PC in a OR order, and issue ATP check, it is carries out, why? I had set availavility check into 02 in MRP3 view

    Availability check
    1. Availability check is an integral part of the business process that determines if the required delivery quantity can be met on a required delivery date. For this purpose the system takes into account pre-delivery activities such as scheduling for picking or packing times and the time taken to produce or obtain the material. It also performs several background functions such as Backorder processing, rescheduling and ATP quantities.
    2. Backorder processing: processing of a sales order that has not been fully confirmed or not confirmed at a certain delivery date.
    3. Rescheduling: is a proposal of how u2013 confirmed quantities already assigned to a sales order can be reassigned to other sales orders that have a higher priority.
    4. Available to promise (ATP): is a process of checking the available quantities of a material. The ATP quantity consists of warehouse stock + planned receipts (incoming stock) u2013 planned issues (outgoing stock). to examine stock on hand (CO09) proceed to logistics u2013 sales & distribution u2013 sales u2013 environment u2013 availability overview.
    5. Replenishment lead time (RLT): is the time taken for the material to become available either internally (in house production) or externally (from a vendor). The most important things to consider during an external procurement are purchasing and MRP2 (procurement) views of MMR where the processing time for purchasing, planned delivery time and goods receipt processing time are taken into account. On the other hand internal procurement is based on in house production time (MRP 2 view) goods receipt processing time or alternatively RLT time, which is found on MRP 3 view.
    6. RLT (Replenishment Lead Time) is the time taken for the material to become available. RLT is only used when doing an ATP check (Available To Promise). The value of RLT for a material is specified on material master record.
    7. There are three types of availability checks u2013
    Check on basis of ATP quantities.
    Check against product allocation.
    Check against planning.
    Configuring Availability check through Checking Groups
    1. The checking group + checking rule determine how the availability check is to be performed.
    2. The checking group determines whether and how the system checks the stock availability and generates requirements for material planning. The checking group defines what type of requirements will be passed on i.e. summarized requirements (daily/weekly) or individual requirements for each sales order.
    3. The checking rule applies to how the availability check is to be carried out at the transaction level. Note that you must define checking rules for each individual application such as for production orders for example. In Sales and Distribution, the checking rule is specified internally within the system and cannot be changed.
    4. The checking rule, in conjunction with the checking group, determines the scope of the availability check for every business operation; that is, which stocks, receipts and issues are to be included in the availability check and whether the check is to be carried out with or without the replenishment lead time.
    5. Briefly explaining the above u2013 checking group determines which type of requirement to be passed on to MRP whether it be individual or summarized and checking rule which is at the transaction level and can be configured independently for each application module, determines which stocks, receipts and issues to be taken into account. For performing an availability check checking group has to work in conjunction with checking rule.
    6. Advantages of individual processing over summarized processing u2013
    Backorder processing is possible.
    You can access (MD04) order, line and schedule line individually which gives a greater control on available stock and requirements placed on stock.
    The system automatically uses individual requirements in case of special stock items.
    7. Required data for the Availability check to be carried out u2013
    The Availability check must be switched on at the requirement class level.
    The Availability check must be set at the schedule line level.
    A requirements type must exist by which the requirements class can be found.
    A plant must be defined in the sales order for each schedule line item (in other words plant must be defined for every material in MMR).
    A checking group must be defined in the material master record in the MRP3 screen in the availability check field.
    8. Configuring Availability check and defining Checking Groups u2013
    Checking groups are introduced into the sales order based on the setting in the material master record.
    SAP standard checking groups are 01 u2013 summarized requirements and 02 u2013 individual requirements or you can create your own by copying the standard ones.
    Total sales and total deliveries columns are there to configure a checking rule to sum up requirements to post to MRP either individually or by day or week.
    Block quantity required can be set if you want several users to be able to process the material simultaneously in different transactions without blocking each other.
    The no check indicator is CHECKED when you DO NOT want the system to carry out ATP check.
    9. Defining material block for other users u2013 the block check box is an indicator that enables you to block material master records of a particular material during the availability check and restrict other users from accessing same master record and reserve the material. If the block is not set, two users can confirm the same material at the same time for two different orders, not knowing if the stock is available or not. If you select this field, the material is blocked during the availability check and other users cannot: a) Make changes in the material master record. b) Create purchase orders for the material. C) Create orders for the material.
    10. Defining default values for checking groups - Checking groups are introduced into the sales order based on the setting in the material master record.
    However if there is no entry present in the material master record for the checking group, a default value can be set here, depending on material type and plant.
    This default value will be used by the system depending on the material type mentioned in MMR and plant in sales order.
    If an entry exists, this default value is over written by MMR.
    11. Controlling Availability Check u2013 in this section, you tell the system what stock on hand and what inward and outward movements of stock it must take into account when performing the availability check in addition to whether or not to consider the replenishment lead time.
    12. These settings are based on the checking group that is assigned to the material master record and the checking rule that is predefined and assigned to the sales and distribution transaction.
    13. These settings carry out control both for sales order and delivery as well. This is due to the fact that you may want to include specific stock or incoming stock for the sales order, yet at the time of the delivery only include physical stock on hand waiting to be shipped.
    14. It is possible to indicate to the system that you would like the availability check NOT TO CHECK the stock at the storage location level. This indicator is used to set the scope of the availability check.
    15. It is used to switch off the check at storage location level. You create a reservation for a particular storage location. However, the scope of the availability check is set in such a way as to exclude the storage location. In this case, the system carries out the check at plant level only and does not take the storage location into account that is specified in the reservation.
    16. Should you not want the system to automatically check RLT, you may indicate so here. RLT is the time taken for a material to become available. It is only used when doing an ATP check and is taken from MMR.
    17. defining the elements in the availability check entirely depends on the business needs, but a few tips are given under u2013
    When controlling the Availability check at the time of the sales order, a purchase requisition does not necessarily indicate by it is going to come into the plant.
    A shipping notification on the other hand - a confirmed purchase order u2013 is a good indicator of receiving stock on a specified date.
    It is always recommended not to select the shipping notifications for the delivery requirements type as you may not actually receive the stock into plant or warehouse for which you are creating a delivery.

Maybe you are looking for