No change to financial summary or a single sale for 2 days

Can the above be correct. Downloads are showing but have never gone 2 days without a single sale before?
Malcolm Bain
Malcolm Bain

Hello Malcnoo,
If you are still experiencing this issue please contact Dev Center Support for assistance.
-Miles
Windows and Windows Phone Dev Center Support
Send us your feedback about the Windows Platform

Similar Messages

I would like to add content that changes on a calendar basis, such as 'thought for the day". It can then display a different text or image on a nominated day. Can this be done? Robert.

I would like to add content that changes on a calendar basis, such as 'thought for the day". It can then display a different text or image on a nominated day. Can this be done? Robert.

OK Thanks Brad.
I could use Tockify of course, but wanted to create the same things on an existing site.
I do not know how to copy the code and get it onto Muse, but that’s OK for now. I will work something else out.
Robert

Payment summary shows only single smartform for multiple entries

Hi All,
When an employee (whose cost center was changed in between the year) uses ESS - Payment Details - Display Payment Summary which uses the program 'rpcpspq0' in backend to show the payment summary, system shows single smartform(first smartform with first cost center).
While I run the program in backend, it shows 2 smartforms (after pressing F3, second smartform is displayed).
User wants both the smartforms to be shown is ESS.
Please suggest me on this.
Note: SAP has provided a note for this, but is useful only with Web dynpro application. While ours is ITS.
Thanks,
Bipen

achieved customizing the smartform.
Thanks,
Bipen

Why can't i sync my songs to my ipod touch? it says "waiting for changes to be applied? its been like for 3 days and if it does sync all my music are grey and wont play on my ipod? any suggestions?

it says "waiting for changes to be applied? its been like that for 3 days and if it does sync all my music are grey and wont play on my ipod? any suggestions? im really getting frustrated ! -__-

Try:
"Waiting for changes to be applied": Apple Support Communities

Transaction or report to check changes to financial data

Is there any transaction or a standard report which helps me to check any changes to financial data. I require this for auditing purposes. Any ideas?
Thanks,
Naren

Again, do you want the changes done to the master data (GL Accounts) or transactions that effect the GL balance? For the master data changes you can check FS04, FSP4, and FSS4. For transactional data, you are basically looking at the documents that effect a particular GL account which in turn has its own change log. Yes, FB04 is the transaction for documents.
In general most of the changes are tracked using what are called change documents and this information is stored in CDHDR and CDPOS tables. You will have to figure out the OBJECT for your data and then you can read the changes from here. You can also use CHANGEDOCUMENT_READ function module. Take a look at other function modules within this function group.

How to change the background color of a single row

Hi OTN,
I am using JDeveloper 11.1.1.2 with ADF faces in view layer.My issue is How to change the background color of a single row in af:table ?.

How to highlight ADF table row based on column value?
Found by searching

Displaying Document Name With The Summary in a Single Column Using Document Library View.

Hi All,
I have a question that relates to SharePoint Document Library Views. I want to view the Documents name with the summary in a single column. Below image shows an example of it. I need this within a SharePoint Document Library. Also I want the height of the
row to be increased more than the default height. I cannot figure it out how to do that? Could you someone help me to do this. I have inserted the Document Library as an App Part to the page.
So could you someone help me to solve this matter?
Thanks and regards,
Chiranthaka

HI Chiranthaka,
You can create DataView webpart using SPD and then modify the display template according to your need.
http://deannaschneider.wordpress.com/2012/07/10/item-counts-dvwp-sp2010/
Hope this will help to solve your problem.
Best Regards,
Brij K

Displaying Document Name & The Summary in a Single Column Using Document Library View

Hi All,
I have a question that relates to SharePoint Document Library Views. I want to view the Documents name with the summary in a single column. Below image shows an example of it. I need this within a SharePoint Document Library. Also I want the height of the row
to be increased more than the default height. I cannot figure it out how to do that? Could you someone help me to do this. I have inserted the Document Library as an App Part to the page.
So could you someone help me to solve this matter?
Thanks and regards,
Chiranthaka

HI Chiranthaka,
You can create DataView webpart using SPD and then modify the display template according to your need.
http://deannaschneider.wordpress.com/2012/07/10/item-counts-dvwp-sp2010/
Hope this will help to solve your problem.
Best Regards,
Brij K

How to change the screen element of a single field in a table control

Hi Gurus,
I want to change the screen element of a single field (or the whole row) in a table control according to a condition.
I have 2 columns in the table control. One is an input column and one output only. When user enters values into the input column, they need to be compared against the values in the other column, and if there is a discrepancy, the row where the discrepancy is needs to be highlighted.
I have tried the following code which highlights the whole column ...
CONTROLS: TC_ZVOYG_BINS TYPE TABLEVIEW USING SCREEN 0500.
DATA: wa_tc_zvoyg_col LIKE LINE OF TC_ZVOYG_BINS-cols.
LOOP AT G_TC_ZVOYG_BINS_ITAB
           INTO G_TC_ZVOYG_BINS_WA.
    if G_TC_ZVOYG_BINS_WA-zdelivery_bin ne G_TC_ZVOYG_BINS_WA-zactual_bin.
      loop at screen.
        IF screen-name = 'ZVOYG_BINS-ZACTUAL_BIN'.
          wa_tc_zvoyg_col-screen-intensified = 1.
          MODIFY tc_zvoyg_bins-cols FROM wa_tc_zvoyg_col TRANSPORTING
          screen-intensified WHERE screen-name = screen-name.
        endif.
      endloop.
    endif.
endloop.
And also the following code which makes no change ...
LOOP AT G_TC_ZVOYG_BINS_ITAB
           INTO G_TC_ZVOYG_BINS_WA.
    if G_TC_ZVOYG_BINS_WA-zdelivery_bin ne G_TC_ZVOYG_BINS_WA-zactual_bin.
      loop at screen.
        IF screen-name = 'ZVOYG_BINS-ZACTUAL_BIN'.
          screen-intensified = '1'.
          modify screen.
        endif.
      endloop.
    endif.
endloop.
Thanks in advance.

Hi,
The modification of a screen element attribute (LOOP AT SCREEN...MODIFY SCREEN) must always be done in the PBO (for a dynpro, it will be in a PBO module, i.e. declared by MODULE ... OUTPUT)
About the loop at the internal table, it is done automatically by the system, also during the PBO, you'll find something like LOOP [AT itab] ... WITH CONTROL ... in the PBO part of the screen flow logic (note: you may have to complete with a supplementary READ TABLE if you don't use AT itab). So you don't need an additional loop.
Best regards
Sandra

How can I change a document from booklet to single pages

How can I change a document from booklet to single pages?

Very cumbersome.
How many pages?
Make a copy first.
In Acrobat use the Crop tool to crop half the width. (Pages > Crop Pages.)
For 11x17 to 8.5 x11 crop all even pages 8.5 left, all odd pages 8.5 right.
Do you have InDesign?
Create a new document correct to finished page size.
(Use Import Multi Page script to) Place all pages offset by the proper page amount.
Export new pdf.

Change of Financial Year End

Hi Experts
We have been advised that we will be changing our financial year (currently July to June) to tie in with our new acqusition companies fiscal year, which runs from January to December.This will be done with effect from end June 2012.
Consequently, we will be running a 6 month 2012 fin year (July to December 2012) and then properly aligning with the 2013 fin year from January 2013.
We have SAP version ECC6 without Flex General Ledger.
Two approaches have been identified by our consulting company :
One approach is to make use of the shortened fiscal year functionality. This would allow us to create a shortened FY2013 of only 6 months, which would run from July 2012 to December 2012.The next Fiscal Year would then start in January 2013 and run to December, as required.The only drawback is that the shortened fiscal year would have to be FY2013, although it ends in December 2012, and that going forward, the FY would always be 1 year ahead of the actual calendar year. There is a further impact, in Fixed Assets, the shortened fiscal year will need to maintain a small bit of config, (OAYP) where we stipulate that the depreciation for the shortened year needs to be reduced to match the shortened length of the year. Also in using the shortened fiscal year approach there is also apparently a couple of SAP notes that they will need to apply to ensure that the asset depreciation is correctly calculated during the shortened year.
In the other alternative the u201Cnew and correctu201D Fiscal years are created and linked to new Company Codes. All financial transactions are then posted in the new companies from period one of the new Fiscal year.
The closing balances of old companies are posted as opening balances for the new Companies.
Some of the other implications are:
The Profit Centers must be opened in the new companies.
The stock must be transferred to the new companies.
The open Purchase orders must be u201Cconvertedu201D to the new companies or new Purchase Orders must be created.
The Fixed Assets must be transferred to new companies.
The Controlling Area might be impacted.
To be able to do Comparison reports we should do a history take on. (This can only be monthly movements per profit center per GL-Account, converted to the new Fiscal periods.)
Experts, are there any other options that are worth persueing with the least business impact ? Please help, your advise will be highly appreciated.

If you do not prefer to create new company codes and undergo a conversion effort, you can go with the first alternative and then engage SAP SLO services to replace the shortened fiscal year 2013 in your system to the correct fiscal year. That way, your next fiscal will remain 2013, and your fiscal year will not be always 1 year ahead of your actual fiscal year.
Please also read the following SAP note. There is a lot of material to read in the attachments to this note, but the time that you spend reading it is time well spent.
https://service.sap.com/sap/support/notes/672255

PY-India: What are the implications of changing the financial year?

Hi All,
I am working on Payroll India.
the client i am working for has a financial yr from March to Feb.
What would be the implications in terms of changes required if I change the usually followed Apr - Mar financial year in SAP to Mar - Feb in Payroll? And what implication will this have on all the legal reports provided by SAP like form 16 etc.
Specifically I wish to ask should I ask the client to change his financial yr to Apr - Mar or should I change financial year in SAP to Mar - Feb?
Amit Upadhyay

it would be better to go for mar to feb as per our inidan fin year
there will be implications in tax related issues pls check those things before changes the fin year
Edited by: Sikindar on Jan 25, 2008 4:22 PM

How do I change headers and footers in one single document in Pages?

How do I change headers and footers in one single document in Pages? I would appreciate any help as this seems to be quite frustrating. Thanks so much!!

Why are you not sure whether you have Mavericks or not?
And what version of Pages are you talking about?
Insert a Section Break and uncheck the copies previous option.
All the Headers and Footers are the same within a Section.
Peter

When I copy and paste from Word to my e-mail using Firefox it changes the font and spacing to single and 10pt. It just started doing this a month ago. It does not do it when I am on my laptop or using Explorer. Help, I hate explorer.

When I copy and paste from Word to my e-mail using Firefox it changes the font and spacing to single space and 10pt.
It just started doing this a month ago.
It does not do it when I am on my laptop or using Explorer.
Help, I hate explorer.

If this were a project that I was involved in, I would recapture the media at the correct frame rate and rebuild the sequences correctly.
Moving from production, to post production, to delivery is a series of steps, and the success of any particular step is based on having all the preceding steps done correctly.
Shortcuts and workarounds tend to create awkward and difficult problems, that often only surface late in the process.
MtD

To change entire column value in a single go.

Hi all,
I have a internal table with company as one of the field. The table may contain any company in the company field. I need to change all company values to a single company without looping. For example the company field may contain 030, 032, 036, 010 etc. But these I want to change to single company 030 "without looping". Like as we do for delete without looping, is it possible in my case?
Thanks with regards,
Suresh.

You could try something like
wa-bukrs = '030'.
MODIFY itab FROM wa TRANSPORTING bukrs WHERE bukrs NE '030'.
Look help.sap.com for syntax at [Changing Several Lines Using a Condition|http://help.sap.com/erp2005_ehp_04/helpdata/EN/fc/eb35eb358411d1829f0000e829fbfe/frameset.htm]
Consolidation or just curiosity ?
Regards

No change to financial summary or a single sale for 2 days

Similar Messages

Maybe you are looking for