No changes made when I change & publish?

I make changes to multiple pages in Dreamweaver CS3. I then
do a precheck within Dreamweaver (IE & Firefox). Both look good
but when I check my site out no changes have been made. I clear my
cache & refresh,,,same thing? I even go in and delete the html
pages and reload but no changes.
What am I doing wrong?

> Hard to fix something that looks good inside my
Dreamweaver.
Not at all. Do you ever look at your code? That's where the
answers are.
Can you post a link to one of these pages? I'm betting that
your site is
not properly defined and that your links are pointing to
files on your hard
drive.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"ss-1" <[email protected]> wrote in message
news:galoa6$egd$[email protected]..
> Yes, so I know the page is gone. I then upload the page
I made changes to
> but
> it doesn't look like it does in Dreamweaver. Links are
broken etc.
> Dreamweaver has the preview in IE & Firefox that I
use to check everything
> out.
> Hard to fix something that looks good inside my
Dreamweaver.
>
> Help!
>

Similar Messages

  • I receive the following error message when trying to publish site changes to iweb: "Can't create the file "shapeimage_2_link_0.png." The disk may be damaged or full, or you may not have sufficient access privileges." Can anyone assist?

    I receive the following error message when trying to publish site changes to iweb:
    "Can’t create the file “shapeimage_2_link_0.png.” The disk may be damaged or full, or you may not have sufficient access privileges."
    Can anyone assist?

    Try the troubleshooting steps under "Fix iWeb" here...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
    ... and then republish.

  • I was hacked i kept getting emails that some purshcaes were being made when no one was downloading them and i guess they hacked my apple iD because they changed the security question and now i cant change anything without the security question please help

    I was hacked i kept getting emails that some purshcaes were being made when no one was downloading them and i guess they hacked my apple iD because they changed the security question and now i cant change anything without the security question please help i want to reset the security question but i cant.

    You should contact Apple by phone as soon as possible. You'll need to change your Apple ID and all passwords.
    See Contact Apple at the bottom right of this page.
    Hope this helps.

  • Everything changes when previewed or published - why?

    This is getting a bit frustrating now.
    Here is how it should look, as designed in Captivate:
    ...and here's what I get when it is published OR previewed:
    1. I am running the updated/patched version of Captivate.
    2. Looking at the text box - why has the top sentence moved onto two lines and why has the indentation of the bullet points disappeared (Where it says 'Blackboard')?
    3. Why are the buttons mis-aligned? They are all 'smart positioned' to the right hand side of the text box and the button immediately above it. The top button is aligned to the top edge of the square shape that makes up the border.
    I just don't understand why it changes - the primary viewport hasn't changed. The tablet and mobile breakpoints are fine.
    Any advice appreciated, thanks.

    Hello all,
    I fixed this by placing each bullet point into its own text box. The indentation issue still exists though.
    Thanks,
    Nathan

  • Change published FQDN for 2012 R2 RDS

    I have Windows Server 2012 R2 (single server hosting all the roles for RDS). I'm using RDS for publishing RemoteApps for both internal and external users. External users connect to remote.company.com and I have certificate from public ca (issued to remote.company.com).
    Active Directory is company.local. 
    When external users connect through the rds gateway and run remoteapp they receive this warning message that is caused by fqdn mismatch 
    I tried to use this script to change fqdn to match remote.company.com and it does that but after that external users cannot open remoteapps anymore. Internally they work.
    https://gallery.technet.microsoft.com/Change-published-FQDN-for-2a029b80
    I get this error in eventlog:
    The user "COMPANY\username", on client computer "xx.xx.xx.xx", did not meet resource authorization policy requirements and was therefore not authorized to resource "remote.company.com". The following error occurred: "23002".
    If I change the published fqdn back to rds.company.local remoteapps starts to work again but with certificate error.
    How can I fix this?

    Hi,
    In RD Gateway Manager, please edit the properties of the RD RAP.   On the Network Resource tab, please select Allow users to connect to any network resource.  After modifying the RD RAP please use Set-RDPublishedName cmdlet to change the published
    name to the correct FQDN as you did before.
    Once you verify it is working you could go back in (if you want to) and create a RDG-managed group with all of the required names.
    Thanks.
    -TP

  • Change Published Replenishment Order

    Hi,
    I'm implementing SMI scenario with SAP SNC 5.1. I was traying to change a Published Replenishment Order, to do this i have:
    Created and published a Replenishment Order in SNC Web UI -> The Purchase Order is correctly created in customer Backend system (ECC).
    Allowed supplier to change published ROs
    Changed and re-published the Replenishment Order in SNC Web UI -> The idoc incoming in Customer Backend system, to change the PO, is in error:
    The material number for item 000001 could not be identified
    For the PO changes, SNC send to PI the VendorGeneratedOrderNotification.XML, PI converts it in to the ORDRCHG.ORDERS05.
    In customer backend system (ECC) I've set the Inbound parameters as follow:
    Message type: ORDCHG
    Message Code: SMI
    Process Code: ORDC
    I've tried also with Message Code "EF" or blank but these cases the error will be:
    EDI: Partner profile inbound not available
    Am I doing wrong something? Where I did a mistake?
    Thank you in advance for your support.
    Edited by: PTP Team Consultants on Jan 24, 2012 11:42 AM

    Hi PTP
    First of all Process Code: ORDC is to change sales order
    Secondly, Why the business allows supplier to change published RO?
    If there is a change that is always performed by supplier, then please do not publish VGON xml to customer system. Wait for confirmation of Sales order from Supplier and then trigger VGON xml to customer system, that would be the best practise to follow
    I do not know how this works, have you tried not maintaining any ORDCHG MESSAGE TYPE
    Like you were saying
    Created and published a Replenishment Order in SNC Web UI -> The Purchase Order is correctly created in customer Backend system (ECC).
    This is taken care by inbound parameter
    Message type: ORDRSP
    Message Code: SMI
    Process Code: ORDS
    Is it not taking care for the changed xml?
    Regards
    Vinod

  • Business Catalyst not fulling uploading site when trying to publish ???

    Can anyone help me please. I am trying to update some changes to a site I am creating but for some reason it keeps stopping upload at 76% upload when trying to publish. I have shut the program down, restarted my mac, logged in and out and in again to adobe, cleared cache and history, deleted business catalyst site and started a fresh, created a new site name and still the same problem except with new site it stops at 99%. Help please.

    Hi Everyone,
    Apologies for the recent trouble publishing from Muse to Business Catalyst servers.
    The issue has been isolated to be occurring on sites on European Datacenter only and the cause of the same is being investigated at the moment.
    Have added an announcement on http://forums.adobe.com/community/muse, which will be updated once the issue has been fixed. You can also track the issue status at http://status.businesscatalyst.com.
    Thanks,
    Vikas

  • Why does the file Name for file attached with Annotations "Attach File" (paperclip) become Unknown when Comments are Published?

    Our company recently purchased Adobe Acrobat Pro XI for the purpose of using it for shared electronic reviews.  We are using Send for Shared Review created in Adobe Acrobat Pro XI, and all the Comment tools work as expectedexcept the paperclip in Annotations.
    When a Word or Excel or Image(png,jpeg) file is attached using the Annotations paperclip, the initiator can initially see and open it. But after Publish Comments is selected and the review file is closed, the file "Name" changes to "Unknown" (although the Description has the correct file name and extension).  The Modified information is Unknown, as is the Size and Compressed Size.
    When the review file is then re-opened, even the initiator cannot open the file, although:
    The file location is marked with the paperclip within the document.
    The file name is shown in the Comments List with the initiator's name.
    In the Attachments list (the paperclip beneath the Thumbnails and Bookmarks) the Name appears as Unknown, Description shows the file name, Modified is Unknown, Size is Unknown, and Compressed Size is Unknown.
    The file Name cannot be edited, although the file Description can be.
    We have followed the procedure described in the tutorials but cannot figure out how to troubleshoot this situation.  Since this feature was the reason for the purchase of Adobe Acrobat Pro IX, we would any help. Please don't leave out any basics since we are all new users.
    We have several people with Adobe Acrobat Pro XI and the rest have Adobe Reader XI and it is a Windows platform.  Can someone please give us some advice how to get this feature to work as described?

    FYI Rave,
    There are some other forum entries with this exact same issue...:
    Cannot Open Attachments in PDF
    Why does the file Name for file attached with Annotations "Attach File" (paperclip) become Unknown when Comments are Published?
    Can someone help us get the COMMENTS ATTACHMENT TOOL to work as described in Acrobat Pro XI?

  • How is payment made when I use Skype to call abroa...

    Can someone explain to me how the payment is made when I use skype to call abroad?
    This post was transferred from its previous location to create its own new topic here; its subject and/or title has been edited to differentiate the post from other inquiries and to reflect the post's content.

    Hi, Brianbarry, and welcome to the Community,
    Skype provides two methods of paying for outgoing calls to fixed or mobile numbers:  a Skype subscription or Buy Skype credit.  Skype-to-Skype calls are always free of charge.
    In the case of Skype Credit, the cost of the call is debited from your balance as the call progresses.  When you reach the equivalent of "2" in whatever currency your account is set to, the credit will attempt to "top up," or the call will drop.  In the case of a subscription, the subscription covers the cost of the outbound calls.
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Timeline problems with caption boxes when viewing and publishing

    Hello,
    I have several captions within one frame and am adjusting the timeline so they do not all appear at once.  When I do this and preview or publish I can only see the first caption - the second/third does not preview or publish.  However if I change the timeline so all captions appear at they are visible when previewing and publishing.
    I would greatly appreciate some help with this.
    Thankyou
    Alison

    Hi there
    You need to adjust the pause point of your Button object. At least I think it's a Button. Can't tell for certain because I'm in the midst of a visual migraine and it's affecting my vision. I suppose it might be a Text Entry Box. They look the same on the Timeline.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcererStone Blog
    Captivate eBooks

  • When iWeb finishes publishing, drop down shows wrong address

    It's kinda weird. When iWeb finishes publishing my website, a drop down window asks, do you want to visit, announce, or finish. If you click visit, it goes to www.gogoglidepath.com/gogoglidepath. It should say www.gogoglidepath.com. Anybody know how to fix it? I know it's just a little bug, but it bugs me.

    Well, no actually it is not incorrect, because that is how iWeb will publish. It will publish using a site folder with the same name as you called your site within iWeb. Did you name your site gogoglidepath in iWeb? If so, if you don't like it then you need to go back and change this in iWeb to something short like Site or S or whatever. That is how iWeb does things so your url is http://www.domain.com/sitename/pagename.
    Are you publishing to MobileMe and forwarding your domain name or publishing direct to your host? If using MME there is not a lot you can do about this apart from changing to web forwarding from CNAME forwarding so that your url will be http://www.domain.com. You can then only bookmark the whole site rather than pages.
    If uploading directly, you can upload just the contents of your site folder rather than the whole folder itself.

  • IPhone 4gs 16GB "the network connection could not be made" when downloading apps

    IPhone 4s 16GB brand new, "the network connection could not be made" when downloading apps. This problem occurs using Wifi, 3g, and even when pluggin into a computer. Please help

    Anyone? It's still not approved/working =/.

  • Error message when trying to publish to iWeb

    Got following message when trying to publish:
    Publish Error: Asn error occurred while publihing file "/Web/Site/
    iWeb/Dryton/Welcome_files/
    navbar1rollover.png".
    What does this mean? How can i fix.

    If you're publishing to .Mac, try File > Publish All to .Mac

  • Keep getting error message when trying to publish imovie '08

    I keep getting the error code -34 when trying to publish a medium size movie to itunes. Any ideas on what to do now?
    thanks,

    That error usually means "Disk Full". Could that be the issue?

  • The swoosh sound my iphone5 made when I moved mail to trash has stopped.  How do I get it back?

    The swoosh sound my iphone5 made when I moved mail to trash has stopped.  How do I get it back?

    First quit and restart Mail and see if the sound returns. BTW it is selected in Settings > Sounds correct?
    Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.
    If that doesn't work try a reboot of your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • Getting an error when installing BI Publisher Desktop

    Hi,
    Is anyone getting an error when installing BI Publisher Desktop? I'm getting an error when I'm installing BI Publisher Desktop and the error message is compile error in hidden module: Module_ini.
    Any feedback would be appreciated.

    Ravi,
    Yes, I have java run time on my machine and I'm in a Windows XP SP2 environment. Also note that I'm installing BI Publisher Desktop for 10.1.3.2 and I have all the prerequisites installed prior to the Publisher Desktop installation.
    The exact error message for the BI Publisher Desktop is:
    Compile error in hidden module: Module_ini (Microsoft Visual Basic)

Maybe you are looking for