No client addresses

Setting up a 2006 wlc ver. 3 with a 1510ag-lap.
Have gotten all interfaces to ping, management can see the Mac of clients trying to connect.
I have set the tag for the vlan on the port. Tried setting the switch port to vlan and trunk mode.
Everything works except the clients getting an address. Need some help

I didn't do the org. config. It was set-up for external DHCP. After going back through the config I stumbled across a drop-down box that I think got mistaken for something else (wireless standard).
Because of the students here we have an open system for them.
The ref. I spoke of is to the 802.1x. We are thinking about setting up a RAS later for the instructors to use.
Sorry about not posting back when solution found. Thank for your help though.

Similar Messages

List of email clients/address books that will sync with palm desktop 6.2

Is there (and if not, I think there should be) a list somewhere of email clients whose address books will sync with a palm Treo (palm Desktop version 6.2)? I have been happily using various palm handhelds for about 6 years now and have been syncing the address book with Mozilla and now Thunderbird for the last couple years. I currently have an m130, but it's time to upgrade to a "smart phone" as I'm tiering of carrying around two devices. Unfortunately, the Treo requires palm Desktop version 6.2 which is not compatible with the Thunderbird palm sync. I have had the idea that Outlook (which I've never used or been exposed to) will sync with palm, but something I read gave me the impression that I would need to buy some third party software to make that happen, plus the $110 they want for Outlook. I would like to think there are other choices for someone who just wants to sync their smart phone with their email client's address book. It seems that such syncing ability would be esential to palm's sales and that a listing of all such syncing possibilities would be extremely beneficial to sales, particularly for new sales to people aren't already insiders on this sort of topic. The lack of ability to sync with Thunderbird may just cause me to stick with my old m130 awhile longer and give up on the idea of a nice new smart phone.
Post relates to: Palm m130
This question was solved.
View Solution.

Wow, thanks a bunch! You just saved me from a long, involved, and discouraging search for an alternative. I'm using WindowsXP, palm m130, palm desktop 4.1, Thunderbird 2.0.0.21 and Thunderbird's palm sync conduit palmsync-2.0.0.x-wsm . I'm wanting to purchase a Treo 700 on ebay, but went to the palm site, clicked on the support link, then the Treo 700, then the downloads tab and it directed me to desktop 6.2, which made me believe I would have to use that to sync a treo 700.
I do wish that both palm and Thunderbird would talk more about the palm Thunderbird palm sync. Unless you're a real geek or very determined (I'm the later), you're not likely to find out that such capability exists. I can't believe I'm the only one out there who needs to have my email client address book contacts with me all the time, so there has to be others who are looking for this.
Next stop, ebay - I have a smart phone to buy.

Distribution list details blank in client address book

Recently noticed that new distribution lists do not show any list members in their details in the GW8 client address book or WebAccess address book. Older DLs show the list members, but if a member is added, then it too does not show members in the client or WebAccess. It looks proper in ConsoleOne, and mailing to the DL works as expected. Has anyone seen this?

Have you done a "Rebuild Indexes for Listing" on the POA or Domain?
ConsoleOne | GroupWise View | Right-click domain or poa | System maintenance | Rebuild indexes for listing

RMI client address interceptor

Hello,
I need to get client address from method which is being called by client using RMI.
public void doSmth() {
SmthAddress address = RMIContext.getClientAddress();
}or something like this.

java.rmi.server.RemoteServer.getClientHost()

How to do getRequestDispatcher().forward with client address bar changed?

getRequestDispatcher().forward will not change the address bar of client, this will cause some problem,
Following is our webapp folder:
/test1/a.jsp(This page include <img src="images/1.gif" ....>)
/test1/images/1.gif
/servlet1 (This is a servlet with the code getRequestDispatcher().forward("/test1/a.jsp") ) When run /servlet1 , the image "1.gif " can not display, because
it refers to "/images/1.gif" and not "/test1/images/1.gif".
Is there any good idea to resolve this problem?
Thanks!

The standard solution is to use a <base> tag to indicate to the page where relative links should be resolved from.
eg
<head>
<base href="http://www.myserver.com/test1/images/a.jsp" />
</head>
<body>
<img src="images/1.gif" ....>
</body>You can build it dynamically using request.getServerName(), request.getContextPath()...
Struts provides a <html:base/> tag which does this for you.
Cheers,
evnafets

TO and REPLY TO fields replaced by recent email client address no matter what I do. Help please?

I own a yahoogroips list and keep the emails since 2009 in a MAIL folder.
A new member at the list with whom I am chatting ON the list, joined 2 days ago. HER email address is now appearing in place of the list address in the TO and REPLY TO fields.
It has replaced those fileds in ALL the emails in my folder from 2009 top now!
Also when I try to address an email to the list address, it automatically gets replaced with the new memebr's email address.
That is so even if I disable auto copleting of addresses.
I can type the list addresws, but as soon as I leave the TO field of the new emails, the address changes to the new memebr address.
PLEASE - HOW did this happen - and HOW do I get it to UNHAPPEN?
MANY thanks for any advice, it is driving me bananas.
(THe list is in urgent use for medical emergency discussion re animals)
Namaste,
Irene

See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...

Mail client / address book bug in iOS 8.2

I've noticed that if you go into Address Book and then starting an email by touching next to the relevant address you cannot SEND the email because SEND remains greyed out, even after you have typed subject and contents
If you delete the address and then select a new one (even the same one!) all works OK!
Starting an email from Mail works OK.

You're correct, but you're not telling the right people - we're just users like you. Report it to Apple at this link: http://www.apple.com/feedback

Lion Server: iOS 5 clients can't connect to Address Card Server

I have set up shared accounts on the server for Calendar and Address Book (family) sharing. Although I can add and use the Address Book shared account on OS X Lion clients, I can't get this to work on iOS 5 clients (iPhone nor iPad). I keep on getting "CardDAV account verification failed".
Calendar sharing works just fine on both OS X and iOS5 clients
Let me briefly describe my setup and observations:
Server:
Running Lion Server 10.7.2 on Mac Mini (server)
Using SSL connections with keys generated during set-up of the server
Portforwarding in router (ao) for 8008 and 8843 (iCal and Address Book)
Created shared accounts on server for Calendar ("sharedcalendar") and Address Book ("sharedcontacts")
In the DNS server I created services in my primary zone for "_caldavs._tcp." and "_carddavs._tcp." both on port 8443
OS X Client (Calendar)
Created additional CalDAV account in preferences (user "sharedcalendar")
Left the server settings untouched (server path, port "auto" and using SSL but not Kerberos)
Created in "sharedcalendar" different calendars and reminder lists for the family members which each can access from their OS X client
This account is now set-up through Profile Manager (tried this with Address Book as well but didn't make any difference)
iOS 5 Client (Calendar)
Once tested on standalone and got this working I'm now using the Profile Manager to push the definition of the shared account to all clients
Hostname with port 8443 (default)
Left Principal URL blank since it was optional
User "shared calendar" with the appropriate password
Ticked "Use SSL"
OS X client (Address Book)
Created additional CardDAV account in preferences (user "sharedcontacts").
Left the server settings untouched (port 443 using SSL)
iOS 5 client (Address Book)
In the settings add a CardDAV account (server, user "sharedcontacts", password, description).
First error message "Cannot connect Using SSL. Do you want to try setting up the account without SSL?". When I press continue I get the error "CardDAV account verification failed"
If I then save the account details still and edit the account I can access the "advanced settings". When I change to SSL I have tried port 0 (default value), 8443 (the one that's listed in the documentation) and 8843 (which is used by default if you try to set up the
account in Profile Manager). All to no avail, including Profile Manager
Observations:
Lion Server app nicely lists both Calendar and Address Book Server as active (plus Profile Manager, File Server, Web server and Wiki server)
When I access my server home page, Calendar is listed in addition to other services (Mail | Calendar | Change Password | Profile Manager) but not Address Book. Is this normal behaviour? i.e. can't Address Book entries be changed through a web interface?
Address Book on OS X client uses 443 for SSL but does not require me to define port 8443 for secure iCal or Address Book server communications
Lion Server Profile Manager specifies port 8843 as port for SSL communication. I only saw 8443 listed in documentation
The response "can't connect .." or "account verification failed" happens very quick which make me think either the verification doesn't even leave the iPad or there is something wrong in the SSL connection
Since iCal set-up works nicely using the same ports I am puzzled why it doesn't work for Address Book
Your solutions or suggestions how to investigate are most welcome,
Erik

Thanks for joining the discussion.
Although port 8443 is mosten quoted as correct port for CalDAV and CardDAV, port 8843 can be found both on Apple's website and other places:
see Technical Note 1649 to find port 8443 listed for iCal and port 8843 for Address Book
Mac OS X Lion Server for Dummies (sic) lists port 8843 on pages 236 and 238 but port 8443 in many other places
when you want to push iCal and Address Book information with Profile Manager, Profile Manager lists port 8443 for iCal but port 8843 for Address Book as default:
So I hope you understand I'm somewhat puzzled.
I did get the Address Book working for my Lion desktops with the all the necessary certificates as far as I know, just not for the iOS devices (iPhone and IpPad). iCal sharing from Lion Server works fine on both Lion and iOS devices.

Cisco prime infrastructure not detect IP address of clients

hi all,
I have Cisco Prime infrastructure 1.2 and when move to monitor >> clients tab it lists me all the clients in my network but their IP address list estates "not detected" ?
please any advice?
I appreciate your kindly support.

Just an update that while this appears to have worked fairly well (as far as Cisco Management Planes go), there was one small 'gotcha' I've noticed so far:
After the services came back up, the entries for our RADIUS servers did not function. No, not because I didn't update the clients address record on the RADIUS server itself, but because the RADIUS server record(s) within CPI have a field called 'Local Interface IP' that still reflects the previous IP assigned to CPI. A quick edit/save with the new interface fixes up the issue however.
Cheers!

ASA 5505 - L2TP over IPsec - Remote Address shows outside interface address

Using an ASA 5505 for firewall and VPN. We've enabled L2TP over IPsec to allow Windows clients to connect without third party software.
The devices complete the connection and authenticate fine, but then are unable to hit any internal resources. Split tunneling seems to be working, as they can still hit outside resources. Packet tracer shows tcp flowing freely between VPN clients (192.168.102.0/24) and internal resources (192.168.100.0/24). Even the NAT translation looks good in packet tracer.
I pulled up the session details for one of the VPN clients in the ASDM and under the IPsecOverNatT details, it is showing the VPN client's remote address correctly, but displays the local address as the address assigned to the outside interface (which the client is using to connect.) This seems to be the problem, as viewing detailed connection logs shows the internal resources trying to send packets back to the outside interface rather than the VPN client's assigned internal addresses. Details:
Crypto map tag: SYSTEM_DEFAULT_CRYPTO_MAP, seq num: 65535, local addr: [OUTSIDE INTERFACE ADDRESS]
local ident (addr/mask/prot/port): ([OUTSIDE INTERFACE ADDRESS]/255.255.255.255/17/1701)
remote ident (addr/mask/prot/port): ([VPN CLIENT ADDRESS]/255.255.255.255/17/0)
current_peer: [VPN CLIENT ADDRESS], username: vpnuser
dynamic allocated peer ip: 192.168.102.1 [This is what I think it should be showing for local ident]
dynamic allocated peer ip(ipv6): 0.0.0.0
#pkts encaps: 16, #pkts encrypt: 16, #pkts digest: 16
#pkts decaps: 18, #pkts decrypt: 18, #pkts verify: 18
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 16, #pkts comp failed: 0, #pkts decomp failed: 0
#post-frag successes: 0, #post-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#TFC rcvd: 0, #TFC sent: 0
#Valid ICMP Errors rcvd: 0, #Invalid ICMP Errors rcvd: 0
#pkts no sa (send): 0, #pkts invalid sa (rcv): 0
#pkts encaps failed (send): 0, #pkts decaps failed (rcv): 0
#pkts invalid prot (rcv): 0, #pkts verify failed: 0
#pkts invalid identity (rcv): 0, #pkts invalid len (rcv): 0
#pkts invalid pad (rcv): 0,
#pkts invalid ip version (rcv): 0,
#pkts replay rollover (send): 0, #pkts replay rollover (rcv): 0
#pkts replay failed (rcv): 0
#pkts min mtu frag failed (send): 0, #pkts bad frag offset (rcv): 0
#pkts internal err (send): 0, #pkts internal err (rcv): 0
local crypto endpt.: [OUTSIDE INTERFACE ADDRESS]/4500, remote crypto endpt.: [VPN CLIENT ADDRESS]/8248
path mtu 1500, ipsec overhead 82(52), media mtu 1500
PMTU time remaining (sec): 0, DF policy: copy-df
ICMP error validation: disabled, TFC packets: disabled
current outbound spi: 05BFAE20
current inbound spi : CF85B895
inbound esp sas:
spi: 0xCF85B895 (3481647253)
transform: esp-aes esp-sha-hmac no compression
in use settings ={RA, Transport, NAT-T-Encaps, IKEv1, }
slot: 0, conn_id: 77824, crypto-map: SYSTEM_DEFAULT_CRYPTO_MAP
sa timing: remaining key lifetime (kB/sec): (4373998/3591)
IV size: 16 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x000FFFFD
outbound esp sas:
spi: 0x05BFAE20 (96448032)
transform: esp-aes esp-sha-hmac no compression
in use settings ={RA, Transport, NAT-T-Encaps, IKEv1, }
slot: 0, conn_id: 77824, crypto-map: SYSTEM_DEFAULT_CRYPTO_MAP
sa timing: remaining key lifetime (kB/sec): (4373999/3591)
IV size: 16 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000001
Any ideas? The remote clients connect but when internal resources try to send traffic to the VPN clients, the packets are directed to the outside interface address instead of the local address assigned to the VPN client.

I have what I believe to be a similar issue. Site to site vpn is working well. That is site b can ping and send traffic to site A but Site A can not. Site B is a 3rd party vpn router. Site A is a Cisco 5505.
It appears that when the crypto map inserts the route into the routing table it shows the route via the outside IP of the outside interface and not the IP of Site B. in the crypto map I can see the proper ip address for the peer. I can't figure out why when it inserts the route that it uses the wrong ip address

How can I get a list of all DCHP clients of my Airport Extreme?

I'm trying to troubleshoot network problems, and I can't figure out how to get a list of DHCP clients. In Airport Utility 6.3.1, it lists the wireless clients when I click on the airport icon, but it doesn't list the wired clients. Running around the house looking at the network settings of every wired device isn't a lot of run.
I saw posts that said to download Airport Utility 5.6.6, but the installer gives an error (I'm running OSX 10.7.5), so I can't get that to run.
Speaking of trying to troubleshoot problems, I don't see any logs accessible from Airport Utility. How should I get at those?
Thanks.

I was not able to install 5.6
You might be using Mavericks. Apple shut the door on 5.6 workarounds in Mavericks.
I can understand the need to keep things simple, but SOME level of advanced information (like wired client addresses) should be available on an advanced screen. Extremely frustrating.
You might want to tell Apple this.
Apple - AirPort Extreme - Feedback

Address Book Server - access from WAN

I can access my Address Book Server using the server's LAN IP address but not its domain name.
I have set up a global Address Book using the technique suggested in this thread https://discussions.apple.com/message/10571482#10571482 which works well. I have a couple of users set up who can see changes the other user makes to the Global Address Book.
The Global Address Book is accessed at my OS X Server's LAN address, 192.168.1.1 with the details as stated in the above thread.
I should (and want to) be able to access the Global Address Book from outside my LAN using the OS X Server's fully qualified domain name, myserver.mydomain.tld. But it doesn't. The client (10.7) Address Book fails to access. The domain address is correctly mapped to the server and works for other services such as iChat. Router ports are (obviously) open.
So I can set up a client Address book using 192.168.1.1:8800/principals/groups/abglobal/ but not myserver.mydomain.tld:8800/principals/groups/abglobal/ nor over port 8843 & SSL.
Any clues?
Thanks!
Message was edited by: David Gordon to correct a typo.

aneez_backer wrote:
The application retrieves the contents of 'address book' when provided with login information of yahoo or any other email account. Can somebody let me know the way to do it??
Yahoo might...
I believe that for different email service providers, the method to access the address-book would be different. Can anybody leads to any of the service providers??
It likely would be, if it's supported at all. Ask the support department of your service provider.

Configured TNS in oracle client to RAC database

Hi Experts,
I have a 4 nodes oracle RAC in radhat 5.0
both oracle database and client as 10.2.0.4.
I created a TNS that works in our office but it does not work in our remote brance office.
Based on experts instruction, I set up sqlnet trace at client side. but not any file that be gererated.
In linux RAC database, I saw listener.log file as
28-AUG-2009 11:00:01 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=sale)(INSTANCE_NAME=sale1)(CID=(PR OGRAM=D:\oracle\product\10.2.0\client_1\BIN\sqlplusw.exe)(HOST=TRAC3)(USER=JIM))) * (ADDRESS=(PROTOCOL=tcp)( HOST=xxx.18.10.xx)(PORT=3289)) * establish * sale * 0
in client pc sqlnet.ora my setting as
SQLNET.AUTHENTICATION_SERVICES= (NTS)
TRACE_LEVEL_CLIENT = 16
TRACE_FILE_CLIENT = client
TRACE_DIRECTORY_CLIENT = C:\TEMPODBC
TRACE_TIMESTAMP_CLIENT = ON
SQLNET.EXPIRE_TIME =10
SQLNET.INBOUND_CONNECT_TIMEOUT = 500
SQLNET.SEND_TIMEOUT = 500
SQLNET.RECV_TIMEOUT = 500
I got a error as
ERROR:
ORA-03135: connection lost contact
which wrong is in my case?
I can connect to all other window database from thsi PC.But I can not connect to RAC database from this PC.
However, I can ping RAC node's IP and VIP from this PC
I also can connect to RAC database with TNS from other window PC.
What do I need to do?
ThanKs for any help.
JIM

Hi Sb92075,
Thanks for your help.
I got same error after comment #SQLNET.AUTHENTICATION_SERVICES= (NTS) in client sqlnet.ora in client.
the server side does not have sqlnet file in linux platform.
I also check listener services that all instance status is ready.
I just saw sqlnet.log file in server side that error as
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for Linux: Version 10.2.0.4.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 10.2.0.4.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.4.0 - Production
Time: 28-AUG-2009 13:21:06
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=xxx.18.xx.xx)(PORT=3513))
what do i need to do?
Thanks
JiM
Edited by: user589812 on Aug 28, 2009 10:22 AM

"ORA-03113: end-of-file on communication channel error" in client side

Problem Description: we have a production server that oracle 11gr2 installed and oracle clients (application servers) with 11gr2 clients. Sometimes we encounter internal server error 500 at the application server side; and when we check out the application server logs we see ORA-03113 error code.
when we look at the corresponding error on the Oracle Database Server side we saw the following output in the alert_orcl.log :
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 11.2.0.1.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 11.2.0.1.0 - Production
Time: 09-ŞUB-2011 12:46:15
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS: İşlem süresi aşıldı
ns secondary err code: 12609
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.1.10.144)(PORT=59999))
Wed Feb 09 12:46:15 2011
what could be the problem or how can i trace it in order to determine the exact problem? is there any parameter that i need to adjust in client side to ensure that every connection reaches the production server ?

There is often an ORA-0600 or ORA-7445 behind these.
These should produce an entry in the alert log and an associated trace file which a) can be used in the ORA-600/7445 lookup tool on Metalink and also uploaded to Oracle Support.
Edited by: Dom Brooks on Feb 10, 2011 1:08 PM
A bit quick to answer - I didn't see the large section of TNS information from the alert log.

Problem in getting Actual ip of client

Hi friends,
I am jr in java programming.. I am developing an application with JSP for remote desktop view.. in which it uses remote client address to serve the desktop..
The problem here is I am getting the static ip provided to client by his ISP, and main problem occuring when two different clients from the same LAN are acceing my JSP,, I am getting two users with same static ip address and while the time of showing desktop of those systems, I am getting only their gateway systems desktop on which proxy is running..
I dont know how to resolve this ip conflict problem
any body plz help me
Thanks in advance
Rama shankar
[email protected]

K.Ramesh wrote:
hi,
getParameter Funtion will return only value of <option> tag
<option value="optionvalue">optionview</option>request.getParameter("selectname"); // this ll give optionvalue, not optionview
try this one.It may be helpful to uThis answer makes no sense.

No client addresses

Similar Messages

Maybe you are looking for