No client status update in dashboard

Hi,
I have the problem that the WSE 2012 (NOT R2) dashboard always shows all my clients as "offline". I re-installed the connector software on all connected clients without success (full process: leave Domain, deinstall connector software, delete computer
via Dashboard, reboot all, re-install connector).
This behaviour seems to be present after update rollup #3 for wse 2012 end of last year.
Maybe, it depends on upgrading the clients to Windows 8.1. Unfortunately, I can't tell exactly.
Everything else is running fine. But, as I use Lights-Out, I have the Problem that the connected clients do not keep the server alive.
Any hints ?
Greetings
Chris

Most likely is either a connector version mis-match, or a firewall issue.
Have you changed with the firewall settings at all?
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Similar Messages

Jabber client status on call / meeting

hi
i have configured jabber clients for mac 8.6.5 and windows 9.1 with our new cups 8.6.4 server
i have enabled calendar integration and this is working really well
too well :-)
if i have a meeting from 2-3pm my status changes to "in a meeting" but when i pick up the deskphone the status remains in a meeting rather than on a call. if my calendar has no meetings and i pick up the phone it changes the status to on a call.
this is slightly annoying as you often have scheduled meetings (by phone) for 1 hour but are actually only in the meeting for 45 mins, so if the phone status (on a call) could over ride the calendar status that would be better imho. as people may think you are still attending this meeting but you are actually available, nobody will edit their meeting if it finished early
or is this something that can be configured, i guess i can turn off the calendar integration but it does have its merits so would rather not do so
many thanks

Unfortunately the user is still having the status update issue after isntalling the 9.0.5 release.
When the user with this issue is unable to answer her extension, we then have it setup so that others in her department can see the call and answer her extension. Is it possible that this might be why the status is still showing she is on a call when she isn't?
It appears the setup explained above is not the problems. Other users are now reporting the incorrect status in 9.0.5 as well.

Client Auto-Update questions

We just updated our Dev system to SP5 with Patch 2, but the clients are not updating automatically.
I have checked that the Client and Admin boxes are checked for auto-update and can see nowhere else that this can be done.
I double-checked with the Master Install guide, and this appears to be the only thing that I need to do to make it work.
The clients are currently at 502, and they should now be 506.
Also, is this controlled by the files in C:\BPC\Websrvr\Web\Installation?
I have checked the live server (BPC 5.1 SP3) and the Dev server (BPC 5.1 SP5r2)
Both of them have EverestClient.exe and EverestAdmin.exe with version number 12.0.0.49974
Does that seem right? I would have expected an increment in version number.
Has anyone else seen this, and can you offer any advice?
Thanks
Craig
Edited by: Craig Aucott on Feb 23, 2009 9:46 AM

Here is an extract from the note:
It does not say about the Patch! sorry...
the note is 1269662
Summary
Symptom
The Client Auto Update feature does not work in 5.1 SP5.
Other terms
auto, update, client, upgrade, install
Reason and Prerequisites
This is due to unintended consequences of fixing IM 3569686 issue in SP5.
Solution
Remove the '<remove name="Documentation"/>' node from the web.config file located in the x:\bpc\websrvr\web directory and save.
Once all clients have been updated, add the node back to the file.
The node is found in the following section:
<globalization requestEncoding="utf-8" responseEncoding="utf-8"/>
<webServices>
       <protocols>
            <add name="HttpSoap"/>
            <add name="HttpGet"/>
            <add name="HttpPost"/>
            <remove name="Documentation"/>
        </protocols>
</webServices>
Header Data
Release Status:     Released for Customer
Released on:     25.11.2008 19:51:41
Master Language:     English
Priority:     Correction with high priority
Category:     Program error
Primary Component:     EPM-BPC-MS-SVM-OTH Other
Hope this helped
Bye

Delivery status update in sales document at PGI

Normally system updates the delivery status of sales document line level, when a delivery document is created with respect to that sales document line.
But I want system to update the delivery status (in sales doc. line) when PGI is done for respective delivery document; not at the creation of delivery document. Below I have shown the status updating scenarios that I expect.
Scenario 1
Sales doc line qty: 100 PCs
Delivery Doc qty: 50 PCs
PGI: Not done
Status in Sales document line should be A (Open)
Scenario 2
Sales doc line qty: 100 PCs
Delivery Doc qty: 50 PCs
PGI: 50 PCs
Status in Sales document line should be B (Partially delivered)
Scenario 3
Sales doc line qty: 100 PCs
Delivery Doc qty: 100 PCs
PGI: 100 PCs
Status in Sales document line should be C (Fully delivered)
Can anyone propose a possible way of doing this (configuration/ user exits/ BADI etc,)?
Thanks,
Ramindu

Hi,
I dont know it with the use of ABAP development, but by functional logic, can suggest you to configure the rush order sales configuration for your particular sales order.
just check that availability of that particualar sales order is met or not prior to it.
and then automatically when your delivery doc is created, PGI would be done and the status of your sales order would be updated with it.
try it out on your development client, if it works out.
regards,
Siddharth.

Status update

Background : In TMS project IDOC interface is used to send out data from SAP to the external transportation planning systems. This interface includes sending of information related to outbound deliveries, which is performed with specific message type ZVXX_TMS1_TPSDLS. As soon as external system receives outbound delivery data from SAP it generates response messages with technical acknowledgment (message type STATUS) and sends it back to SAP. Then external system process data received from SAP and as data is processed, message with Functional acknowledgement (message type STATUS) is generated and sent out to SAP through XI.
In SAP STATUS messages update outbound delivery messages ZVXX_TMS1_TPSDLS with new statuses received from external system. In this way it is possible to have information in SAP regarding outbound delivery processing in External system.
The problem related to status update process is found. In some cases even STATUS IDOCs are created in correct order in SAP, they update ZVXX_TMS1_TPSDLS messages in incorrect order. And it makes not possible to track actual processing status of outbound deliveries in external system with message ZVXX_TMS1_TPSDLS status record.
Requirements
Basic requirement is to have status for outbound message TMS_TMS1_TPSDLS which reflects progress of data processing in external system.
The right sequence of status scheme is to process technical acknowledgment before the functional acknowledgment.
Can any one help ?

Hi,
One more method is to provide Milestone timing for critical loads/availability of reports.
For eg consider you have one chain loading data into a few critical targets. Depending on the data volume, load timings and post processing identify a critical milestone time by which everyday the chains should be complete. say 9.00 AM in clients time zone (normal beginning of business day when clients may expect a report).
Only in the scenario where its delayed you have to inform client through a mail with the reason for delay and expected time of availability. Otherwise when there is no delay its understood that data is available.
Hope this helps.
Thanks,
JituK

SCCM client status show NO

Hi All,
i have deleted obsolete machine from SMS collection
‎‎after that i reinstalled the SMS client and readded the same machine
‎‎still that machine is showing client status is NO
Please help me what to do

Please try this. It worked for me.
Rebuild the repository and WMI services on client
Stop the WMI services and rename the existing repository as
'repositoryold' and restart the services. Initiate all actions once rebuilding respository is completed.
OR
Reset the GUID on client system using Client Action
Tool (CAT)
Add all the client hostnames in CAT
Go to > Client Agent Action
Run > Generate New SCCM GUID.
Wait for actions and initiate all the actions twice. Update the collection members
few time in console then check the client status. It Works!

On the main window, what is the column to the left of client status icon?

on the main window (ARD version 3), what is the narrow column immediately to the left of the column with client status icon? (The columns to the right of the client status icon are Name, IP address, DNS name, ARD version, and so on)? I can't find this mentioned anywhere in the Remote Desktop manual.
That column is blank next to all the computers except one, which has a blue (aqua) circle.
PowerMacG5dual1.8GHz Mac OS X (10.4.8)

I have now managed to reproduce the blue (aqua-looking) ball. Just as I had at work, I installed ARD v. 3. on a machine on my home LAN, once again setting it up as the administrator machine. To install the client on another machine in the LAN, I then chose the "Upgrade Client Software" option. I entered the username and password of an admin user on that machine, hit "Upgrade" and the installation appeared to go successfully. Upon returning to the Scanner (main) window on my administrator machine, I noticed the blue ball in that first column next to the name of the machine with the newly updated client software.
Was there anything in common between the one machine at work with a blue ball in that column and the one machine at home with the blue ball? The only thing I can think of is that on neither of those 2 machines had I ever manually installed ARD 2.2 client previously. Does that make any sense?

When are we going to get a REAL status update?

It is now 23 hours for me in San Diego. I am losing time and money from paying clients! This is asinine. Apple - we need a status update. MANY of us use our email for work and this is crippling!! Please help!

Terrible customer support! Poorly designed systems and processes; what a colossal mistake. I think they can keep the iPhone 5.....hello Google.

Status update for MeeGo on the N900

Here's a copy of the text sent by Harri Hakulinen from Nokia. He is the project lead for MeeGo on the N900. This message was sent to the MeeGo developer mailing list just now:
Hello MeeGos !
This is brief status update of "MeeGo to N900" project. This project is currently running as Nokia project, and I am Nokia project lead for it. The current closed mode of development is not the target for us at all, but rather transitional condition. As already discussed by Valtteri in TSG meeting, we are looking into going more open mode shortly. One reason why we have done this on this way is that at the same time we have been trying to handle opening of many currenly closed components that are needed in MeeGo and to build feasible MeeGo images for N900.
However, a lot of related work is already done completely open, you can find more info from places like ofono.org, connman.net and meego.gitorious.org . So if you are eager to contribute or want to closely follow whats happening, please work on those.
As you know, we have delivered working MeeGo images for N900 as part of first code drop in the end of March. At that state we were using older kernel version on N900 than on Atom side, as we used the same kernel (.28) than what is used in Maemo 5 based products today. We ended up doing that simply because lack of time to contribute and port all the drivers to the newer kernels.
Now, for the upcoming May release of MeeGo, we are going to use the same kernel version (.33) than Atom based devices are using. For that we need to submit number of ARM-architecture patches to MeeGo as well, because many of the required ones have just been contibuted upstream kernel and were not available in .33 version originally.
We have already enabled most of the main drivers, like LCD, GFX, Wlan and BT. Still, there is a lot to do in order to enable .33 on N900, like audio drivers, and modem subsystem including SSI buss driver, modem data and audio drivers etc. Our adaptation guys are in fact contributing those modem subsystem related drivers as we speak, and if you are following kernel mailing lists you can see how that goes on.
Besides of enabling the new kernel, we are working with number of smaller and bigger issues for N900. Starting from the beginning, we are now based on ARMv7 combiled code, so the code should be better optimised for N900 now. ARMv5 compilation that was in use for code drop will still be there, and it also seems to be used at least by community project that is planning to release MeeGo for good old N810 tablets
Also, we are planning to enable dual booting of Maemo 5 and MeeGo for the upcoming release. So that will be offered as 3rd way to setup MeeGo to N900, including the existing "native" MeeGo only on N900 and chroot based MeeGo on Maemo 5 setups. Taking the dual boot mode into use likely includes upgrade to Maemo5 kernel as well, but that should not be big issue in the process of enabling that.
As I don't want to go ahead of others working on MeeGo architecture and other issues I will stop now, but I will report again when we have more to tell about the subject.
Br,
// Harri

Here's another update..
It seems that MeeGo on the N900 is not directly being driven by Nokia! It's an open project.. so the net result is MeeGo on the N900 may look and feel very different to Meego on the N900's sucessor
Either way, I'm certainly greatful for their efforts!
Hello Meego's,
As indicated in my previous mail about "MeeGo for N900" status, we were planning to open up our MeeGo work around N900. Now I am happy to announce, that we are there
First, to make it absolute clear for everybody: This is about open MeeGo adaptation to N900 device.
Like any other MeeGo project, it is open source project for all applicaple purposes, and does NOT directly have links to any potential Nokia product or potential product plans. So, based on this or any other of my posts, please do NOT start or continue speculation of upcoming Nokia MeeGo releases. That is practically not helpfull, and mostly only takes our time when we need to explain our words and actions in detail to various directions.
From our part, we are trying to implement the open development model that has been discussed now so many times around MeeGo. On practical terms, we are trying to work based on proposal by Carsten Munk, see
http://wiki.meego.com/Proposal_for_Best_Practices_for_working_in_a_MeeGo_team
We have already created some resources that will be used by the team, you can learn about those and the upcoming ones from http://wiki.meego.com/ARM/N900. We have IRC channel for realtime discussion, we will use meego-dev mailing list for normal discussions and announcements, and we will have Gitorius project for code.
We will evolve our practicies during the work, so if you are interested, stay tuned to those channels. I belive that soon we are also able to figure out, what is best way for community members to help us in development, and then effectively be part of the team.
I would also like to use this as opportunity to introduce the team behind this work (so far) and also thank them about their hard work and long hours. We have team that consist of some Nokia subcontractors and also growing team of Nokia personel:
"MeeGo for N900" team (so far)
- Cybercom Turku team; Marko Saukko, Jouni Peltonen, Sami Sirkiä, Jari Smura and Luka Milovanov.
- Cybercom Tampere team; Kalle Lampila,Teemu Tuominen,Tuukka Mäkinen and Ville Marjusaari.
- Carsten Munk via Nomovok
- Jarkko Nikula via Atomide
- Jan-Simon Möller from Linuxfoundation
- Nokia team; Alexander Kanevskiy, Felipe Contreras, Markus Lehtonen, Ameya Palande, Sakari Poussa, Roger Quadros and me.
In addition to official project team, many Nokia people have helped us despite their hectic daily work, even with their free time. Most of them are driven by the desire to open, repurpose and upstream all relevant sw that has been originally created for Maemo 5 based N900 product during previous years.
Marko, Jouni, Sami & Luka and Markus were working with me already on last year when we did prototypes and interoperability tests of Maemo & Moblin stuff combined in different ways. Based on those we had pretty good picture of what we are doing and why.
And of course, we have had very good and productive co-operation with various Intel teams since those times. Anas Nashif and many others from Intel's MeeGo team have done a lot for us by enabling ARM stuff in MeeGo OBS and repositories.
Last but not least, I want to give special thanks to Stskeeps (alias Carsten Munk . He has teached us how to operate on open, and he has also done respectable amount of this work since early days of Meego. In addition to that, I belive that his earlier work on Maemo community and on Mer project has in fact inspired all of us and shown a way to MeeGo alredy years ago.
Br,
//Harri

Unable to run bapis for project status update and date update together

Hi Experts,
I have a requirement to update the dates and status of a project WBS at level 4. I am trying to do update the CJ02 Transaction using standard BAPI available. I need to do both Date update and status update in the same LOOP PASS   i am using the below mention bapi. when i am doing so i am getting an error Project 'A._____' has been currently processed by ID i.e. my id.
I have tried putting a wait for 2 seconds in the code but its still not working. please find the order below in which i am calling the bapi.
Loop at itab.
if date_changed = 'X'.
      CALL FUNCTION 'BAPI_PROJECT_MAINTAIN'
      READ TABLE it_error WITH KEY message_type = c_e.
      IF sy-subrc <> 0.
Commit
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
             EXPORTING
                  wait   = c_x
             IMPORTING
                  return = s_ret.
   endif.
endif.
if Status_change = 'X'.
      CALL FUNCTION 'BAPI_PS_INITIALIZATION' .
      CALL FUNCTION 'BAPI_BUS2054_SET_STATUS'
      READ TABLE t_result WITH KEY message_type = c_e.
      IF sy-subrc NE 0.
        CALL FUNCTION 'BAPI_PS_PRECOMMIT'
             TABLES
                  et_return = t_ret.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
             EXPORTING
                  wait   = c_x
             IMPORTING
                  return = s_ret.
     ENDIF.
endif.
    WAIT UP TO 4 SECONDS.
endloop.

Try to use
SET UPDATE TASK LOCAL.
before each BAPI call.
Did you try to debug through your code, leaving sufficient time between BAPI calls? If it does work like that, then the above statement might help.

HT4314 hello i have an ipod touch 4 5.1.1 and i can't post status updates or have a profil picture what is the problem and my sister has it and we have the same itunes account in game center

hello i have an ipod touch 4 5.1.1 and i can't post status updates or have a profil picture what is the problem and my sister has it and we have the same itunes account in game center

And the answer is:
williamfromlongueuil wrote:
we have the same itunes account in game center
You need to have your own account... DUH....

Windows 8 clients not updating via SCCM?

I am running Windows Server 2012 R2 and SCCM 2012 R2 (v5.0.7958.1000) and am trying to deploy updates to a Windows 8.1 client but am not having any joy, I keep getting errors within the WindowsUpdate.log.
Can deploy updates to Windows 7 machines okay but not Windows 8.1.
An extract of the log can be found here http://1drv.ms/1aJm3VO
www.techielass.com

logs seems to be good .you can check other logs like wuahandler.log ,updatesdeployment.log . Read the blog post how to troubleshoot software update issues http://eskonr.com/2015/04/sccm-2012-troubleshoot-client-software-update-issues/
Eswar Koneti | Configmgr Blog: www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: eskonr

Status Update of Service Order From Billing Document

Dear Experts,
I am told to change the User status of Service Order once the Billing Document is Generated.
Here we are in CRM 2007 and i have done the status update of previous document but here
Billing document is not possible to read through CRM_ORDER_READ (function module).
Do any one have any idea how do i proceed.
Thanks,
SA

hi sa
to change the service order user status , when biling document is generated
make an implementation of bill_acc_if bai and in the method ENRICH_ACC_DOCUMENT
read order data using crm_order_read and change the status using
CRM_STATUS_CHANGE_EXTERN
thnks
sam

Can´t access my files on Creative Cloud. "Page temporarily unavailable. We will return soon." "We are working quickly to resolve the problem and apologize for the delay. Check back later or visit our website for status updates. In addition, you can get he

Hello,
For a few days I have been trying to access my files on Creative Cloud web without success. I´ve got this message only:
"Page temporarily unavailable. We will return soon."
"We are working quickly to resolve the problem and apologize for the delay.
Check back later or visit our website for status updates.
In addition, you can get help in the forums of the Creative Cloud.
Thank you for understanding!"
(I used Google Translate)
Somebody help?

You do not need ?&promoid=KRUVP at the end of the url but it should not matter.
One thing to check is if your hosts file is modified. Open the Command Prompt and type: notepad %systemroot%\system32\drivers\etc\hosts
This will open a read-only copy of your host file in Notepad. Are there any entries in this file regarding adobe.com?
The other thing you can do is open the Developer Tools in the Chrome browser. On Windows press Ctrl + Shift to open them. Switch to the Network tab. Reload the page by pressing Ctrl + r. Check for any 4xx or 5xx errors which should be colored red.
Post screenshots of your results or send me a private forum message with the information.

Report on "Status updates history"

Hi,
i need to check if resource are updating task from "My Task". Is it possible to estract a report on "Status updates history"?
I mean this type of data:
Approval Date
Action
Status
Info
Task Name
Project
Type
Start
Finish
Actual Work
Remaining Work
% Complete
Assigned To
Approved By
Thanks
Daniele

Hi Daniel,
You will probably have to create a join with the MSP_ASSIGNMENT_TRANSACTIONS Table.
See reference here:
http://blogs.msdn.com/b/project_programmability/archive/2008/01/03/statusing-transactions-partial-documentation.aspx
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

No client status update in dashboard

Similar Messages

Maybe you are looking for