No clue how to start mail

Okay, I am brand new to macs, been on PCs my whole life and I don't know how to get past the first screen of the mail program just to set it up!
When it gave choices for the account type I clicked exchange account because I have a gmail address and would like to use that account. Is that how it works or am I way off?
If this were a PC I would be fine but I got sick of all the problems it was having so I need to adjust. HELP!!!!
iMac

Okay, I enabled the POP in my gmail account but my problem is getting past the new account set up on my computer. I get to the second page and it says "checking the connection to POP server "mail.google.com"..."
Than after a little bit it comes back with this,
"The POP server “mail.google.com” is not responding. Check your network connection and that you entered the correct information in the “Incoming Mail Server” field. If it still doesn’t respond, the server might be temporarily unavailable.
If you continue, you may not be able to receive any email."
What am I doing wrong?

Similar Messages

Somebody please help me! My mac has been running very slow for 2 weeks for no reason. I have no clue how this started.

I have a early 2013 macbook pro with retina display and it has all of the updates. My mac won't load pages fast anymore on an browser. And it won't run anything as fast as it used to. This just started happening to me about 2-3 weeks ago. Please help me fix this problem I have no clue what is going on.
Thank you
Specs :
2.7 GHz Intel Core i7
16 GB 1600 MHz DDR3
Intel HD Graphics 4000 1024 MB

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1249 ' 0.5 0.25 10 1000 15 5120 1000 25000 1 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1000 200 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:per sec:ms/s:KiB/s:%:total:MB:total' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%d MB: %s\n' '\n    ...and %s more line(s)\n' '\nContents of %s\n    '"${k[22]}"'mod date: %s\n    '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' BEGIN { FS=":";if(system("sw_vers -productVersion|grep -q ^10\.1")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' { sub(/ :/,"");print|"tail -n'${p[10]}'";} ' ' NR==2&&$4<='${p[7]}' { print $4;} ' ' ($1~"wir"&&$2>'${p[22]}')||($1~/P.+ts:/&&$2>'${p[19]}') { print $1" "int($2);} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q":"$0":"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/{print};END{if(NR<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS=":";} $2<=m[$1]{next} $1<9 { o[$1]=o[$1]"\n    "$3" (UID "$4"): "$2;} $1==9&&$5!~"^/dev" { o[$1]=o[$1]"\n    "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==10&&$5 { p="ps -c -ocomm -p"$5"|sed 1d";p|getline n;close(p);if(n) $5=n;o[$1]=o[$1]"\n    "$5" => "$3" (UID "$4"): "$2;} $1~/1[12]/ { o[$1]=o[$1]"\n    "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+5;i++)u[i]=u[2];split("'"${k[28]}"'",l,":");for(i in o) print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n    "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n    [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n    "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n    '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/:/;s/(\n)c/\1:/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */    /;p;' ' s/^.+ |\(.+$$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2 \1/p' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/:(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8}':/;s/ *: */:/g;p;' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS=":"} { printf("'"${f[6]}"'",$1/1048576,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") D=D"\n"$1;} END { print D;} ' ' NR>1&&$3!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $3":"$2;} ' '|tail -n'${p[6]} ' $1>1 { $NF=$NF" x"$1;} /\*/ { if(!f) f="\n\t* Code injection";} { $1="";} 1;END { print f;} ' ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^ |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') nextfile;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|(mplet|nabl)ed|ry HD|safe b|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1:%@d:%s:%d\n\",@a);printa(\"2:%@d:%s:%d\n\",@b);printa(\"9:%@d:%s:%d:%s:%d\n\",@c);printa(\"10:%@d:%s:%d:%d\n\",@d);printa(\"11:%@d:%s:%d:%d\n\",@e);printa(\"12:%@d:%s:%d:%d\n\",@f);printa(\"3:%@d:%s:%d\n\",@g);printa(\"4:%@d:%s:%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag $ -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' print\ system --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'M -exec stat -f'%z:%N' {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|commit - no t|deprec|Goog|realp|sandbox ex|/root" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console}\ log Activity SMC Login\ hook 'I/O per process' 'High file counts' UID Daemons Agents XPC\ cache Startup\ items {Admin,Root}\ access Stylesheet Library\ paths{,' ('{shell,launchd}\)} Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ {caches/logs,overrides} Shutdown\ codes Heat Diagnostic\ reports Bad\ plists Free\ space VM Bundles{,' (new)'} Trust\ settings );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 27;B1&&! B2&&C2 28;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99; for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 65 6 76 13;D2 45 20 52 66;D4 66 7 77 14;D4 17 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 31 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 32;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 25 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 81;B3 18;A1 33 60 82;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 59 4 65 76 91;D4 63 4 19 44 75 95 96;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 12;D4 15 5 72 12;C4;};D4 16 5 73 12;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 18 31 107 94 74||{ B2&&A1 18 26 94 74;}&&{ B7 11;B4 0 0 11;C3 23;};A1 18 26 94;B7 11;B4 0 0 11;C3 24;D4 60 14 66 92;D4 58 14 67 93;D4 26 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 29 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108; A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B3 15;B6 14 15 4;C3 67;A1 24 75 74;B3 23;A2 39 57 30;B3 24;B6 23 24 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 30;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I may not agree with them.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

How may I automatically stop and start Mail services at a set time please

Hi folks. I was wondering if anyone could tell me how to automatically stop and start Mail services (or any other services) at a set time please in Leopard Server? Is there a script someone has created which might help?
Cheers, David ( a realy newbie when it comes to administering OS X server)

launchd works through a series of XML documents that define tasks to run, either at launch, on a time schedule, in response to network events, etc.
So you'll need to create two .plists - one to start the mail server and one to stop it. They should be saved in /Library/LaunchDaemons. I'd suggest something like:
/Library/LaunchDaemons/local.postfix.stop.plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
  <key>Label</key>
  <string>local.postfix.stop</string>
  <key>ProgramArguments</key>
  <array>
    <string>/usr/sbin/serveradmin</string>
    <string>stop</string>
    <string>mail</string>
  </array>
  <key>StartCalendarInterval</key>
  <dict>
    <key>Hour</key>
    <integer>1</integer>
    <key>Minute</key>
    <integer>00</integer>
  </dict>
</dict>
</plist>
and /Library/LaunchDaemons/local.postfix.start.plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
  <key>Label</key>
  <string>local.postfix.start</string>
  <key>ProgramArguments</key>
  <array>
    <string>/usr/sbin/serveradmin</string>
    <string>start</string>
    <string>mail</string>
  </array>
  <key>StartCalendarInterval</key>
  <dict>
    <key>Hour</key>
    <integer>4</integer>
    <key>Minute</key>
    <integer>00</integer>
  </dict>
</dict>
</plist>
You'll need to either use launchctl load /Library/LaunchDaemons/local.postfix.stop (or start) to load the tasks, or reboot your server.
I'm curious, though, as to why you want to do this. Mail is typically one of the services that people want to run 24/7 so they don't miss out on any emails (even though SMTP can tolerate this). Why do you want to shut yours down?

How to stop mail from recovering the same message over and over again to the extent that it has wiped out all start up disk memory?

How to stop mail from recovering the same message over and over again to the extent that it has wiped out all start up disk memory?

You need to find and delete (move to the Trash) the offline mail cache (.offline cache.) It's a hidden folder (files and folders with a preceding dot are hidden) inside the Mail folder (inside IMAP) in your user library. Since it's hidden, in order to see it run the following command in Terminal in Applications>Utilities. Hit return/enter once you have pasted in the command.
defaults write com.apple.finder AppleShowAllFiles -bool true ; killall Finder
To reverse this and hide all those hidden files and folders again
defaults write com.apple.finder AppleShowAllFiles -bool false ; killall Finder
Leave hidden files/folders enabled until you finish emptying the Trash so you know it's gone.

Just bought an ipod touch 4th generation and haven't got a clue how to transfer music, videos, pictures... from my PC to my ipod! I just don't understand how it works!

Just bought an ipod touch 4th generation and haven't got a clue how to transfer music, videos, pictures... from my PC to my ipod! Please, HELP! Cheers mates!

Go here and read the Welcome, Get started and Basics.
http://www.apple.com/support/ipodtouch/

Where can I get help with partitioning my hard drive? I have a "non-genuine" version of windows that I need to replace but I have not a clue how to go about doing that.

I love my mac, but I unfortunately have to also run windows because of engineering software. I bought windows 7 at my campus computre store and one year later my computer is telling me that my software is "non-genuine." I need to fix this asap, but my computer store refuses to do anything because a year has passed. Microsoft wont help because I have a Mac.
My question is, where can I go to find someone who can help me uninstall the "non-genuine" windows 7 and replace it with a functional one?
Im allowed a free download of windows 7 because I'm still a student, but I have no clue how to go about uninstalling and reinstalling windows.
Thanks a bunch.

Hello,
This kind of question is best asked in the Windows Forums, however I've had some succession with a similar issue myself.
Non-Genuine Windows means that it can't authenticate your copy of Windows.
It's not a problem, all your need is a genuine product key code. Provided you don't have different version of Windows 7 installed to the one you are buying (for example windows 7 Home Premium and Windows 7 business) Then you can use the new key code.
Click on the Start Button and type: CMD (into the 'Search programs and files' field in the Start Menu)
The Start Menu will show 'CMD.exe',
Right-click the CMD.exe file and select Run As Administrator.
In the CMD window, type: slmgr.vbs -ipk <type your product key here>
To activate windows after changing the key, type: slmgr.vbs -ato
It should now accept the new key code and you will need to be connected to the Internet to authenticate.
If by chance the windows 7 types are different (One is Home premium say and the other is Business) then you will need to uninstall that copy of Windows 7 and install the new one. If your using BootCamp then you will need to go into BootCamp under system preferences and remove that copy of Windows (delete it)
Then create a new setup with your new Windows 7 disk.
For me I had the same type of windows, changing the product code worked. Saved me the bother of having to reinstall Windows again and it was all genuine.
Best of luck

How to configure Mail software to store all related files on the network

I know that Mail software stores all files in Library/Mail under my home directory. Since I have a MacBook Air (with lesser disk space than other Macs), I'm trying to see if I can get the Mail software to read/write files to a network folder instead of Library/Mail. I have done the same with iPhoto in that it looks at the library file from the network and not the local disk. Any ideas of this can be done for the Mail software? Or if this is advisable?

you can do it but I'm not sure if it's advisable. You'd have to test and see how well it works. also, the network drive has to be mounted at all times when you are using Mail, otherwise Mail will crash.
quit Mail. Mount the remote volume. copy the directory homedirectory/Library/Mail to the remote volume and trash the original.
then open terminal and do the following.
type
ln -s
do not press enter yet. press space and drag the copied directory from the remote volume to the terminal window. press space again and type
~/Library
the result should look something like this
ln -s /Volumes/remote-drivename/Mail ~/Library
Press enter in terminal. This will create a symbolic link (it will look like an alias in Finder) to the new location of the Mail folder. Now when you start Mail it should behave normally. In case of problems, quit Mail, delete the symbolic link and move the folder back.

Problem with starting Mail

After copying back a time machine backup Mail doesn't start. Every time I start Mail the program starts to import my mails and then it is stopping and shutting down. How can I solve the problem?

This looks like a font issue. Take a look at the following article:
Font Management in Mac OS X Tiger and Panther
Try this as well:
1. Go to Apple Menu > System Preferences > Accounts, and create a new user account for testing purposes.
2. Either log out of your main user account or just quit Mail so that it does not interfere with the other user account.
3. Log in as the newly created user and set up Mail anew there.
4. If this is a POP account, go to Mail > Preferences > Accounts > Advanced and disable Remove copy from server after retrieving a message.
5. Check whether the problem also happens when logged in as another user.
As to what you see in Disk Utility, not sure what you mean, but it seems normal to me.

HT1222 how to start my iphone 4 if its struck on logo?

how to start my iphone 4 if its struck on logo? can any1 help me?

I synchronize my contacts and calendars across multiple computers (and iPhones) via iCloud, but all of the devices end up with the same versions.
I don't want our different mail accounts synchronized between computers, so I don't sync that with iCloud, but you can (I don't recommend it with your work computer).
You should be able to sync the music with iCloud.
Give it a try and see if that works for you.

How to start WebDynpro - Feeling down and lost

Hi guys,
I started working with webdynpro based on ABAP. Its definately nice and I appreciate SAPs tutorials. But they are just the basics and a lot of things are not described.
How can I create a good tree model? SAP online docu has nothing about it. The How-To paper is just for Java.
How to create a ALV with the possibility to enter data? How to assign the header texts of columns dynamically?
Ok, there are examples in SE80. But there is always one mega application handling every single UI component that exists. And then the examples cover so many topics at once that its nearly impossible to really understand a single detail.
These are the questions and topics I have. Having a couple of years experience with ABAP I am used to the fact that online documentation is more or less useless. I think you agree with me that it might also be a benefit to go through a new development topv the hard way and just try and try and try... Thats what we all are used to and thats why we are as good as we currently are.
But honestly, most of the documentation SAP provides is for me at least useless. I would spend much more time and money and help on those guys who write the How-To papers because they do a tremendous good job.
But how did you guys started with WebDynpro? How did you e.g. managed to create your first tree (dynamic etc.). I still wonder where to create the tree-structure in my program and have no clue what the "context" attribute is used for. Somewhere I have to create the hierachy, assign icons etc. like in the old Dynpro-Tree approach.
What do you think? Have I just not found all the documentation I search for? Do I simply have to spend as much time to understand how tree, ALV etc. works in detail like I did some years before in the old dynpro-world?
Regards, Hendrik

Hi Hendrik.
I agree with you that reading the online documentation sometimes let more questions come up than it solves.
You asked how we started with WebDynpro. So I just used the book WebDynpro
for Abap of Ulli Hoffmann which is a good entry to get the basic ideas.
Asking questions here helps a lot too.
But my basic approach was the good old try and error method. But I bet there are
still a lot of things that are possible with WD4A I do not event know abaout.
So as Mohammed mentioned just post your questions and a lot of people here
will surely try to help you.
PS: You also should have a look at the <a href="https://wiki.sdn.sap.com/wiki/display/WDABAP">WIKI</a>. Though it is still in the beginning it might worth a look.
<b>Appeal to all</b>: If you find the time pls submit to the WIKI. There are still a lot of open points. If you find repeating questions here please find a place in the WIKI were you could write a short tutorial how to solve it.
Cheers,
Sascha
Message was edited by:
Sascha Dingeldey

How to start MWA in 11i apps

Hi,
how to start and stop MWA, and how to check the MWA process on OS level .
its 11i apps
os : HP

Sawwan,
I can see some errors in log file
[Tue Jan 26 13:24:20 EST 2010] (Thread-343) PH: caught IOException
java.io.IOException: -1 is read from input stream
     at oracle.apps.mwa.presentation.telnet.ProtocolHandler.readChar(ProtocolHandler.java:1385)
     at oracle.apps.mwa.presentation.telnet.ProtocolHandler.enterHighlight(ProtocolHandler.java:2011)
     at oracle.apps.mwa.presentation.telnet.ProtocolHandler.run(ProtocolHandler.java:731)
[Tue Jan 26 13:35:39 EST 2010] (Thread-344) PH: User E011436 got disconnected...
[Tue Jan 26 13:35:39 EST 2010] (Thread-344) PH: caught IOException
java.io.IOException: -1 is read from input stream
     at oracle.apps.mwa.presentation.telnet.ProtocolHandler.readChar(ProtocolHandler.java:1385)
     at oracle.apps.mwa.presentation.telnet.ProtocolHandler.enterHighlight(ProtocolHandler.java:2011)
     at oracle.apps.mwa.presentation.telnet.ProtocolHandler.run(ProtocolHandler.java:731)
any clue ..?

TS3899 I upgraded to IOS 6, I am unable to get into my Yahoo mail. It accepts pw, and pops up and tells me how many e-mails I have and then goes right back to the sign on screen. verified that I can get in from laptop & wireless is functioning.any sugges

I upgraded to IOS 6, I am unable to get into my Yahoo mail. It accepts pw, and pops up and tells me how many e-mails I have and then goes right back to the sign on screen. verified that I can get in from laptop & wireless is functioning.any suggestions?

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

How to start agent on the database host which is being Monitored

Hello All,
I have installed OEM 11.2.1.0. I have stopped getting alerts after the Node1 server is rebooted. I am monitoring RAC database.
When I checked the agent status on host I get the following output
[oracle@rs1pre91dvdba01 bin]$ pwd
/u01/app/oracle/agent11g/bin
[oracle@rs1pre91dvdba01 bin]$ emctl agent status
Environment variable ORACLE_UNQNAME not defined. Please set ORACLE_UNQNAME to database unique name.
[oracle@rs1pre91dvdba01 bin]$ export ORACLE_UNQNAME=MDM11
[oracle@rs1pre91dvdba01 bin]$ emctl agent status
EM Configuration issue. /u01/app/oracle/product/11.2.0/dbhome_1/rs1pre91dvdba01_MDM11 not found.
[oracle@rs1pre91dvdba01 bin]$
And same on Node 2
[oracle@rs1pre91dvdba02 bin]$ pwd
/u01/app/oracle/agent11g/bin
[oracle@rs1pre91dvdba02 bin]$ export ORACLE_UNQNAME=MDM12
[oracle@rs1pre91dvdba02 bin]$ emctl agent status
EM Configuration issue. /u01/app/oracle/product/11.2.0/dbhome_1/rs1pre91dvdba02_MDM12 not found.
Please can I know how to start the agent on the nodes and also how auto the process of starting the agent on the Server reboot
Thanks.

[oracle@rs1pre91dvdba01 bin]$ env | sort
ASM_SID=+ASM1
_=/bin/env
COBBLER_SERVER=ccoshs02xvsat01.ccosvc.com
DB_HOME_BIN=/u01/app/oracle/product/11.2.0/dbhome_1/bin
DB_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
DISPLAY=localhost:10.0
DWH_SID=DWH11
G_BROKEN_FILENAMES=1
GI_HOME_BIN=/u01/app/11.2.0/grid/bin
GI_HOME=/u01/app/11.2.0/grid
GRID_HOME=/u01/app/11.2.0/grid
HISTSIZE=1000
HOME=/home/oracle/
HOSTNAME=rs1pre91dvdba01.pre.ccosvc.com
INPUTRC=/etc/inputrc
LANG=en_GB
LD_LIBRARY_PATH=/u01/app/oracle/product/11.2.0/dbhome_1/lib
LESSOPEN=|/usr/bin/lesspipe.sh %s
LOGNAME=oracle
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
MAIL=/var/spool/mail/oracle
MDM_SID=MDM11
NLS_DATE_FORMAT=dd-mm-yyyy hh24:mi:ss
NLS_LANG=ENGLISH_UNITED KINGDOM.AL32UTF8
OLDPWD=/home/oracle
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
ORACLE_SID=MDM11
ORACLE_UNQNAME=MDM11
PATH=/u01/app/oracle/product/11.2.0/dbhome_1/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/sbin:/home/oracle//bin
PWD=/u01/app/oracle/agent11g/bin
SHELL=/bin/bash
SHLVL=1
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
SSH_CLIENT=172.30.0.43 54890 22
SSH_CONNECTION=172.30.0.43 54890 172.30.2.201 22
SSH_TTY=/dev/pts/0
SVN_EDITOR=vi
TERM=xterm
TNS_ADMIN=/u01/app/11.2.0/grid/network/admin
USER=oracle
Please can you tell me which variables needs to change

When I turn on my Macbook pro retina display i get a black screen and i noticed that the machine gets very hot, any clue how to make it work?

When I turn on my Macbook pro retina display, a black screen show up while I hear the normal start up sound. I noticed that the machine gets very hot, any clue how to make it work?

If the Mac is too hot to touch, take it in for service.
Apple - Find Locations

How to start the Solution Manager Implementation

Hi Gurus , I am in Solution manager implemnetation project , and i wanted built the exsisted landscape into Solman so any one can help me out in this like where to and how to start.

Hi Gurus, i wanted to implement these concepts
Configuring Solution Manager
Configuring Solution Manager
1)      Solution Monitoring
a       SAP EarlyWatch Alert
a1      Setting-Up EarlyWatch Alerts    Y
a2      Manually Executing Downloads    Y
a3      Create Report and Display Session Details       Y
a4      Save, Retrieve and Archive EarlyWatch Alert     Y
b       Service Level Reporting
b1      Service Level Reporting Change Mode     Y
b2      Maintain General Settings       Y
b3      Specify Systems and Contents for Service Level Report   Y
b4      Select Business Processes for the Service Level Report Y
b5      Select Business Processes from the Business Process Monitoring Y
b6      Process Service Level Report Data Manually      Y
b7      Create Service Level Report     Y
b8      Create, Save and Archive Service Level Report Manually Y
b9      Process Service Level Report Session    Y
b10     Send E-Mail Automatically       Y
b11     KPI Calculation Y
2       Configuring Alert Monitor
       Central System Administration (Part of ALERT Monitor)
c2.1    MTE Classes and Attribute Groups        Y
c2.2    Methods Y
c2.3    Operating the Alert Monitor     Y
c2.4    Actions in the Alert Monitoring Tree    Y
c2.5    Selecting Nodes in the Alert Monitoring Tree    Y
c2.6    Elements of the Alert Monitor   Y
c2.7    General Properties of Monitoring Tree Elements Y
c2.8    Properties of Monitoring Objects and Attributes Y
c2.9    Customizing the Alert Monitor   Y
c2.10
Changing Properties in the Alert Monitoring Tree
       Y
c2.11
Changing Properties in Customizing Transaction RZ21
       Y
c2.12
Triggering a Heartbeat Alert if No Values Are Reported
       Y
c2.13
Changing the Frequency of Method Execution
       Y
c2.14   Defining, Releasing, and Transporting Methods
       Y
c2.15
Assigning Methods to MTE Classes or Individual MTEs
       Y
c2.16   Assigning Methods to MTE Classes or Individual MTEs     Y
c2.17
Editing Monitors and Monitor Sets
       Y
c2.18
Creating and Editing Monitor Sets
       Y
c2.19   Transporting Monitor Sets and Monitor Definitions       Y
c2.20   Copying, Renaming, and Deleting Monitors        Y
c2.21   Creating and Changing Monitors Y
c2.22   Rule Node: Rule Description and Use     Y
c2.23   Defining Monitors with the DEFINE_R3_SYSTEMS/GET_MTE_BY_CLASS Ru        Y
c2.24   Defining Monitors with the Rule GET_MTE_BY_CLASS_AND_OPTIONS    Y
c2.25   Defining Monitors with the Rule GET_MTE_BY_CLASS_AS_VIRTUAL     Y
c2.26   Copying a Monitoring Properties Variant Y
c2.27   Create Monitoring Properties Variant    Y
c2.28   Change Monitoring Properties Variant    Y
c2.29   Activating a Monitoring Properties Variant      Y
c2.30   SAP-DEFAULT     Y
c2.31   Creating a New SAP-DEFAULT Variant      Y
c2.32   Monitoring Multiple Systems     Y
c2.33   Monitoring Multiple Systems: Defining RFC Connections   Y
c2.34   Monitoring SAP R/3 3.x Systems Y
c2.35   Creating the CSMREG User        Y
c2.36   Monitoring Multiple Systems with an Identical System ID Y
c2.37   System Groups in the Alert Monitor      Y
c2.38   Deactivating and Reactivating Monitoring Tree Elements Y
c2.39   Deleting and Restoring Nodes in the Alert Monitoring Tree       Y
c2.40   Display Options of the Alert Monitor    Y
c2.41   Saving and Resetting the Layout of a Monitor    Y
c2.42   Extending the Shared Memory Area        Y
c2.43   Setting Up a Central Data Cache         Y
c2.44   Configuring the Caches of the Monitoring Architecture   Y
c2.45   Working with All-Clears (Green Alerts) Y
c2.46   Displaying the History of the Threshold Values of Performance No        Y
c2.47   Availability Monitoring with CCMSPING   Y
c2.48   Installing Availability Agent CCMSPING Y
c2.49   Changing the Monitoring Frequency and Timeouts of CCMSPING      Y
c2.50   Adding Systems to the Availability Monitoring Manually Y
c2.51   Finding and Correcting Errors with CCMSPING     Y
c2.52   Configuring Availability Monitoring     Y
c2.53   Creating and Changing Monitoring Rules Y
c2.54   Changing Monitoring Setting of Servers and Groups       Y
c2.55   Using Multiple CCMSPING Agents Y
c2.56   Creating and Changing a Monitoring Pause        Y
c2.57   Monitoring System Groups with CCMSPING Y
c2.58   Availability and Performance Overview Monitor   Y
c2.59   Monitoring Log Files with CCMS Agents   Y
c2.60   Structure of the Log File Template of the Log File Agent        Y
c2.61   Example Log File Templates      Y
c2.62   Logfile Monitoring Monitor      Y
c2.63   Monitoring Selected Processes with SAPOSCOL     Y
c2.64   Monitoring Response Times of Transactions or Clients    Y
c2.65   Monitoring Database Tables with the Alert Monitor       Y
c2.66   Self-Monitoring of the Alert Monitor    Y
c2.67   Selected Alert Monitor Methods Y
c2.68   Forwarding Alerts to Alert Management (ALM)     Y
c2.69   Interpreting a Text Attribute as File Name/URL and Display Content      Y
c2.70   Displaying a Subtree as ALV Grid Control        Y
c2.71   Defining an Automatic Alert Notification        Y
c2.72   Auto-Reaction Method: Execute Operating System Command Y
c2.73   Setting Up Central Auto-Reaction Methods        Y
c2.74   Installing CCM4X        Y
c2.75   Activation in the background,if the Host restarts       Y
c2.76   Creating RFC Connection Y
c2.77   Copying File from Solution manager to agents    Y
c2.78   Copying version for SAPCCM4X    Y
c3      Central User Administartion(CUA)
c3.01   Create manaintain landscape     Y
c3.02   Creating RFC    Y
c3.03   Create Logical clinets in SM1   Y
c3.04   Field distribution parameters   Y
c3.05   Transfering users from child system     Y
2       Service Desk
a       Set-Up Message Creation in Web Browser Y
b       Create support messages with NOTIF_CREATE       Y
c       Process Messages in Service Desk        Y
d       Search for Solutions to Support Messages        Y
e       Copy Support Message into Solution Database     Y
f       Forward Support Message to SAP Y
g       WebClient Interaction Center    Y
h       Create Messages with Interaction Center WebClient       Y
i       Process Messages in the Interaction Center WebClient    Y
j       Service Desk for IT Service Providers   Y
k       Using an External Service Desk Y
l       Connect an External Service Desk        Y
m       Service Desk Customizing Error Analysis Y
it's very high prioriety
Cheers

No clue how to start mail

Similar Messages

Maybe you are looking for