No color for DVD

32L2200U, I have the tv only hooked up to our DVD player, a Toshiba HD DVD. I have the Input set to color stream HD. The problem is that I can only get the screen to show in Black and White. Any suggestions on how to correct this?

Model 32C120U: I am experiencing the same issue, I only have a DVD player hooked up and the pic is in black and white. I was searching around some more and think it may be the cables, they recommend RED/BLUE/GREEN for better quality pic and sound. I am going to purchase a new cable and try that.

Similar Messages

50L1450U no color for dvd

when I plug in my dvd with the red, white and yellow cables, I only get black and white picture. I changed the AV input to video instead of color stream, as was suggested for another model, but it didn't help.

I would think you should be using Component Video connectors ( red, blue, green).
http://www.myaccount.charter.com/customers/Support.aspx?MenuItem=61#vid

Render settings for DVD

I'm rendering .mov files and creating DVD's for display on a 32" hdtv. I have made the DVD's in iDVD and all is functioning perfectly, the only thing is that the quality is really bad! The colors look much lighter and all of the crisp detail is lost and it looks very blurry. It's purely an animation video, all created within After Effects. What am I doing wrong? Is there a setting within the composition that I should know about? Please let me know if anyone has an answer to creating a simple, high quality video, using After Effects.

Your biggest mistake was not reading the section on rendering. Type "rendering" in the search help field at the top right corner of AE and study up.
I would use the Adobe Media Encoder and one of the for DVD options.

What is the best compressor setting for dvds

What is the best compressor setting for dvds that is not for HD dvd players? I used "DVD Best quality 90 min" and changed the GOP setting to 7.5 and my dvd looks terrible. the text is blurry and the colors are bad.

correction the bit rate is 7.5

Remote Control does work with Sylvania Color TV/DVD Model 6520FDF

I cannot get the remote control to work the volume on a Sylvania Color TV/DVD Model 6520FDF TV. Can anybody help me?

Have you tried the scan mode to scan for the proper code?
TV/DVD combo units are notoriously hard to program to universal remotes. So if you did a scan and none of them worked then the likelihood is that the remote just will not work with that unit. If you have not tried a scan, here is the instructions to do so.
WHAT IF NONE OF THE CODES WORKED?
If none of the codes worked, try the following procedure. (As before, we will use the example of a TV. For other devices use the appropriate Device Key instead of the TV key in step 2 and 3.) 1. Turn on your TV.
2. Press and hold the TV key.
3. While holding down the TV key, press OK. 4. Release both keys. The Device Keys will blink twice.5. Press 9 - 2 - 2. 6. Point the remote at the TV.
7. Press PLAY.8. Press FASTFORWARD (FF). Every time you press FF the remote sends out a new power-off command to the TV. Keep pressing FF until the TV turns off. (You can press REWIND to go back.) 9. When the TV turns off, you have found the right code. Press OK to store this code. Note: There are over 300 TV and DVD codes. The most common codes are tried first, but you may still need to press over 300 times to find the right code. If you reach the end of the list of codes the entire remote will flash twice and return to normal operation. You can exit programming at any time by pressing Exit.
Message Edited by spacedebrismark on 05-17-2009 02:26 PM
====================================================================================
Error exists between keyboard and chair.

How to give Common Background color for all JPanels in My Swing application

Hi All,
I am developing a swing application using The Swing Application Framework(SAF)(JSR 296). I this application i have multiple JPanel's embedded in a JTabbedPane. In this way i have three JTabbedPane embedded in a JFrame.
Now is there any way to set a common background color for the all the JPanel's available in the application??
I have tried using UIManager.put("Panel.background",new Color.PINK);. But it did not work.
Also let me know if SAF has some inbuilt method or way to do this.
Your inputs are valuable.
Thanks in Advance,
Nishanth.C

It is not the fault of NetBeans' GUI builder, JPanels are opaque by default, I mean whether you use Netbeans or not.Thank you!
I stand corrected (which is short for +"I jumped red-eyed on my feet and rushed to create an SSCCE to demonstrate that JPanels are... mmm... oh well, they are opaque by default... ;-[]"+)
NetBeans's definitely innocent then, and indeed using it would be an advantage (ctrl-click all JPanels in a form and edit the common opaque property to false) over manually coding
To handle this it would be better idea to make a subclass of JPanel and override isOpaque() to return false. Then use this 'Trasparent Panel' for all the panels where ever transparency is required.I beg to differ. From a design standpoint, I'd find it terrible (in the pejorative sense of the word) to design a subclass to inconsistently override a getter whereas the standard API already exposes the property (both get and set) for what it's meant: specify whether the panel is opaque.
Leveraging this subclass would mean changing all lines where a would-be-transparent JPanel is currently instantiated, and instantiate the subclass instead.
If you're editing all such lines anyway, you might as well change the explicit new JPanel() for a call to a factory method createTransparentJPanel(); this latter could, at the programmer's discretion, implement transparency whichever way makes the programmer's life easier (subclass if he pleases, although that makes me shudder, or simply call thePanel.setOpaque(false) before returning the panel). That way the "transparency" code is centralized in a single easy to maintain location.
I had to read the code for that latter's UI classes to find out the keys to use (+Panel.background+, Label.foreground, etc.), as I happened to not find this info in an authoritative document - I see that you seem to know thoses keys, may I ask you where you got them from?
One of best utilities I got from this forum, written by camickr makes getting these keys and their values very easy. You can get it from his blog [(->link)|http://tips4java.wordpress.com/2008/10/09/uimanager-defaults/]
Definitely. I bit a pair of knucles off when discovered it monthes after cumbersomely traversing the BasicL&F code...
Still, it is a matter-of-fact approach (and this time I don't mean that to sound pejorative), that works if you can test the result for a given JDK version and L&F, but doesn't guarantee that these keys are there to stand - an observation, but not a specification.
Thanks TBM for highlighting this blog entry, that's the best keys list device I have found so far, but the questions still holds as to what specifies the keys.
Edited by: jduprez on Feb 15, 2010 10:07 AM

How to let the user define the colors for each plots in the graph (I use LabVIEW 7)?

How to let the user define the colors for each plots in the graph (I
use LabVIEW 7)?

Hi,
Take a look at this example, it uses property nodes to select tha
active plot and then changes the color of that plot.
If you want to make the number of plots dynamic you could use a for
loop and an array of color boxes.
I hope this helps.
Regards,
Juan Carlos
N.I.
Attachments:
Changing_plot_color.vi ‏38 KB

How do I create my own favorite template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to templates, which take more memory. I have a large slideshow, and need all the space I can get

First, how do I create my own favorite theme template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to already existing themes, which take more memory. I have a large slideshow, and need all the space I can get. I just want to use a picture as my DVD cover, and then insert a slideshow. Also, when I try to burn my 8.5gb double sided slideshow, all that burns is the music. It is a large slideshow, a memorial on the life of my now deceased brother. This means a lot to me and to my family, and I am having so much trouble trying to burn it. I have gone into Project View and selected appropriately. The bar shows I have room to burn this DVD, but it does not burn. I have burned so many DVDs in the past, but this one just will not burn. I am so confused at this point. I will say this is the first 8.5gb I have attempted to create and burn. My specs list a 7.7gb or 4.7gb as operable....but there are no 7.7gb dvds. I had to purchase 8.5gb. Help? What am I doing wrong? I have spent so much time on this, and just cannot figure it out.

Final Cut is a separate, higher end video editor. The pro version of iMovie.
Give iPhoto a look at for creating the slideshow. It's easy to assemble the photos in an album in iPhoto, put them in the order you want and then make a slideshow of them. You can select from various themes and transitions between slides and add music from your iTunes library.
When you have the slidshow as you want use the Export button at the bottom of the iPhoto window and export with Size = Medium or Large.
Save the resulting Quicktime movie file in your Movies folder.
Next, open iDVD, choose your theme and drag the QT movie file into the menu window being careful to avoid any drop zones.
Then follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
The reason I suggest iPhoto is that I find it much easier to use than iMovie (except for the older iMovie 6 HD version). Personal preferences showing here.

Need to convert 16X9 to 4:3 letterbox for DVD

Hello
Can anyone tell me the settings I need to convert 16X9 to 4:3 letterbox for DVD. I am mixing other 4:3 letterbox content. Evertime I make an mpeg with Quicktime conversion it is squeezed. I want it to be letterbox in 4:3
Thanks in advance.
I am using Final Cut Pro 4.5 and DVD pro 3
Regards,
Dana Gonzales

In addition to using the advice above, make sure in Compressor (or other item you use to encode) that you are using the 16:9 encode ratio. If you are using QT conversion (which it sounds like from Final Cut?) also make sure that ratio is checked. Unlike a 4:3 m2v which will be 720 x 480 when you open it in QT, the 16:9 will be 720 x 404

Can you no longer have a background color for the text box in the new version of hp photo creations

just updated to the new version of HP Photo Creations, used to be able to have a colored background for the text box - is that no longer possible in this new (not better) version????!!!!! Uuuuuuuuuugh

Hi Lainey.
Thanks for asking. We're working on bringing back that feature. In the meantime, here's another way to add text backgrounds: Add a placeable graphic and then click the Arrange button to send it to the back, behind the text.
That approach also gives you more interesting shapes. The new alignment guides make it a snap to align a graphic with a text box. In the example below (it may take a day for the image to show up here), I also used the new Premium Editing Features to change the color of the graphic.
P.S. — Applying a thick border to an empty text box (also using the Premium Editing Features) is another way to create a background shape. That has the advantage of letting you pick any color for the box. You'll also find several new text styles at the bottom of the new text menu.
Let us know if we can help further,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

Transfer footage iMovie 08 to iMovie 06 HD & change outline color for text

I have a completed video that is basically all stills. I would like to transfer the stills in their current sequence and if possible with their current crop styles ie Ken Burns without having to start ALL over. Is this possible? Just downloaded 06 HD because I wanted more editing options that iMovie 08 seems to be lacking.
Also, how do you change the outline color for text in titles? At one point it switched from black to white but I have no idea how it happened... now its back to black.
Lastly, are we only allowed to place music exactly at the head of a clip or is there a setting I am unable to find that unlocks that "snap to" function?
Thank you.
Message was edited by: boogieon
Message was edited by: boogieon

Thanks....I was thinking that was probably it. Will be a little time consuming, but I'll feel better in the end knowing a vacation and bunch of summer stuff is back on tape for archiving.

Background color for column heading

Hi,
I have 5 columns in my report and I would like to have different background color for column headings. How can I do this in report templates?
I was looking at Column heading section-
<th class="t10ReportHeader"#ALIGNMENT# id="#COLUMN_HEADER_NAME#">#COLUMN_HEADER#</th>
How can I specify backgrund colors for all columns here?
Thanks in advance

G'day Karen,
Thanks for ur reply.
I have seen this note before, its not that the header colors have changed after latest SP was applied in our systems. Also the ABAP and JAVA stacks are in sync.
Scenario is that we are trying to set up a new Portal theme for Enterprise Reporting with some specific color codes (hex codes).
What i have observed is Characterstics Header background color is set up using the element "Background Color of Level 1 Column Heading ".
While the Background color for Key Figures header is using element "Background Color of Level 2 Column Heading ".
But the problem is element "Background Color of Level 2 Column Heading " is also used as the Background color for Standard Characterstics cell, so if we make it same the whole report of the same color, which we dont want.
Requirement is to get the same Background color for Header cells (both Char. and Key Figure headers).
Any further suggestions will be appreciated.
Thanks
CK

Color for a Field in alv output

Hi All,
I use a field in the ALV grid output which needs to display color (red or green) depending on certain validations. Please tell me how to display color for this field. The program uses oops.
Thanks.

Hi
1. add one more field to ur final internal table say COLOR(4)
2. in layout wa_layout-style_fname = 'COLOR'. " if its grid
wa_layout-style_fieldname = 'COLOR'. "if its list
3. read table itab index 3.
itab-color = 'C410'.
modify itab index 3
4. see program SHOWCOLO for all color codes
1. Add a field of data type CHAR(3) to the internal output table.
2. Enter the color code in the appropriate field of the row to be colored in the internal
output table:
Code: 'Cxy'
C = Color (all codes begin with 'C')
x = color number ('1' - '9')
y = highlight ('0' = off, '1' = on)
3. Assign the internal output table color code field name to the IS_LAYOUT importing
structure IS_LAYOUT-INFO_FIELDNAME field and pass this structure in the ALV call
interface.
To enable row coloring, you should add an additional field to your list data table. It should be of character type and length at least 4. This field will contain the color code for the row. So, lets modify declaration of our list data table gt_list.
you should fill the color code to this field. Its format will be the same as explained before at section C.6.3. But how will ALV Grid know that you have loaded the color data for the row to this field. So, you make it know this by passing the name of the field containing color codes to the field INFO_FNAME of the layout structure.
e.g.
ps_layout-info_fname = <field_name_containing_color_codes>. e.g. ROWCOLOR
You can fill that field anytime during execution. But, of course, due to the flow logic of screens, it will be reflected to your list display as soon as an ALV refresh occurs.
You can color an entire row as described in the next section. However, this method is less time consuming.
Coloring Individual Cells
This is the last point about coloring procedures for the ALV Grid. The procedure is similar to coloring an entire row. However, since an individual cell can be addressed with two parameters we will need something more. What is meant by more is a table type structure to be included into the structure of the list data table. It seems strange, because including it will make our list data structure deep. But anyhow ALV Grid control handles this.
The structure that should be included must be of type LVC_T_SCOL. If you want to color the entire row, this inner table should contain only one row with field fname is set to space, some color value at field col, 0 or 1 at fields int (intensified) and inv (inverse).
If you want to color individual cells, then for each cell column, append a line to this inner table which also contains the column name at field fname. It is obvious that you can color an entire column by filling this inner table with a row for that column for each row in the list data table.
Reward points if useful
Regards
Anji

Problem in Setting Background Color for JButton

Hi,
I am using Background color for JButton (color is selected from the customized JColorChooser created by us) where it contains the option of transparency. If we choose light color, then the background is set to JButton, but when we mouse-over the JButton, other components inside the container (JPanel) is getting displayed inside the button.
Can anyone help to sort out this problem.
Thanks in advance.

Hi,
Here is the code.
DialogWrapper is JDialog and ColorEditorPane is JPanel.
DialogWrapper dlg = new DialogWrapper();
ColorEditorPane colorPanel = new ColorEditorPane();
colorPanel.setValue( _data.getTransparentColor());
dlg.showWrappedDialog( colorPanel, "color_help", "color_dialog" );
if( dlg.isOK())
Color chosenColor = (Color) colorPanel.getValue().getContent();
_data.setTransparentColor( chosenColor );
_transparentColorDisplay.setBackground( chosenColor );
_transparentColorDisplay.setOpaque( true );
this.repaint();
this.doLayout();
this.validate();
}I've several components like JCheckBox, JRadioButton, JTextField in "this".

How can i set the alternating colors for a table rows

Dear All,
Please any one help me how can i set the Alternating colors for Table Rows.
i created a theam there i set the background alternating color to brown and i set the table design properity to alternating. but it is not reflecting.

Hi,
The design property in Table properties should work for your requirement. Select "alternating" value for design.
Please see the API below:
design
Determines the appearance of the table. The property design can take the following values and is represented by enumeration type WDTableDesign.
alternating - The table rows are displayed alternately in a different color.
standard - The table background has one color. The individual table rows are displayed with grid net lines.
transparent - The table background is transparent. The individual table rows are displayed without grid net lines.
Check whether you have changed the right property or not? Also table should contain more than one rows to test this scenario.
Regards,
Jaya.
Edited by: VJR on Jun 17, 2009 6:43 PM

No color for DVD

Similar Messages

Maybe you are looking for