No colouring in Statement Coverage

Hello,
Im using EHP6 for SAP ERP 6.0.
In the Unit Tests there are some Codes that arent highlighted in red or green in the coverage Analyzer.
Does anybody know why this is so? And if there´s a Workaround for this?
The Codes have a lot of comments in it, i´ve seen code without comments and everything runs finde (red/green highlighting).
Is it neccessary to clean the Code from comments?
Best regards,
Timo

Hi Randolf,
Yes i know about that. I can´t give you a Screenshot for Security Reasons.
What i´ve found so far is, that if i let the mouse curso for about 1500 ms on a line, then a popup near the cursor describes how often this code row has actually been reached and how often it was reached during the whole unit test. So it seems to me, that the process of gathering information about
how often a line of code during the unit test was reached, runs as usual.
The only annoying thing is, that this information isn´t painted in red/green on the code.
So for security reasons, i can describe the code as pseudo as follows:
- Public instance method test1
METHOD test1.
  TYPES: BEGIN OF test_type,
                         amount TYPE i,
                         percentage TYPE internal_percentage,
               END OF test_type.
  DATA:
     some Variables here....
  FIELD SYMBOLS:
     some Field Symbols here...
  BEGIN OF METHOD LOGIC
*SOME COMMENT HERE
  ANOTHER MEHTOD LOGIC
"SOME INLINE COMMENT HERE
"THE COMMENT NOW GOES ON IN THIS LINE
  MORE METHOD LOGIC
*ANOTHER COMMENT WAS WRITTEN HERE
MODIFY SOME STRUCTUR "This is the Structur
*HERE WAS THE OLD MODIFY OF STRUCTURE
*YET ANOTHER COMMENT
  CALL  FUNCTION 'ROUND'
ENDMETHOD.
I hope this helps for any suggestions.

Similar Messages

  • CS4 Bridge Colour Issue.

    Using my Canon 5D MKII, I shoot everything in RAW with the colour space set in the camera to Adobe RGB. Looking at the RAW files in Adobe CS4 Bridge, the Metadata file properties states that the Colour profile is 'Untagged'. Is that correct - or should it say Adobe RGB?
    When you open up the RAW file in ACR, it states that the image has the Adobe RGB profile at the bottom of the screen and when it comes into PS, no profile mismatch warning comes up. Its only when you save the image as a PSD file when the metadata Colour Profile states Adobe RGB.
    Also...
    Since moving onto Windows Vista, if I am displaying images in Bridge through a video projector, the colours look over-saturated, whilst images displayed in other applications look fine. This does not happen on my standard monitor.
    Any ideas what might be causing this?

    Ray, it will do a lot more good if you file an official bug report at http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    Be sure to describe the configuration in extreme detail.
    Peter

  • Navbar with 'down' state

    Hiya,
    My client has asked for a diferent coloured 'down' state on his navbar.  I used to do this by creating buttons in Photoshop then using DW8's Insert Navbar function.  Having now bought DW5.5 I see that the Insert Navbar function seems to have been replaced - or at least moved. 
    My questions:
    Should I now be using the Spry menu for this?  If so can you point me to an easy-to-follow tutorial, as I haven't been able to work out how to format the spry menu to show the 'down' state?
    Is there another simple way to do this?
    Is there a good reason why I shouldn't just go back to DW8 to create the menus?
    Thanks everso much

    OK,
    Lets have a look at one of the examples in the link I suggested:
    http://css.maxdesign.com.au/listamatic/horizontal02.htm
    In Dreamweaver I created a new HTML page and opened in Code View.  I cut and pasted the HTML from the page in the body of the page and cut and pasted the CSS in the head.  Took Two minutes.  You can see that here.
    martcol.co.uk/test/simpleMenu.html
    It is a very simple menu and the magic happens in this rule:
    #navlist a:hover
    color: #fff;
    background-color: #369;
    text-decoration: none;
    You can play around with the CSS and use colors, borders, backgrounds whatever, to suit your own site.
    Martin

  • Colours drifting between files in Illustrator CC

    My oranges keep changing and I'd really appreciate it if they would stay the same shade of apricot.
    I do a lot of work for a client who's corporate look features Black, white & orange. To start with they sent me PDF's to work from, generated by another designer, and for their particular shade of orange I eyedropped it and it came in at 53% Magenta, 100% Yellow. I have been using this delightful shade of orange for all their print work and they are happy with the results.
    Recently they have asked me to put together their exhibition stand, they sent me some actual logo files, .ai, .eps. .png, and when you open these files on screen the orange is exactly the same. But it says it's Pantone Orance 21c. BUT if I copy and paste the offending logo onto a new document it displays as an almost red type orange, but it still tells me its the same Pantone orange. Converting it makes no difference on screen. it seems to be simply that on screen it displays different.
    If I convert the Pantone Orange to CMYK it says its 83% Magenta and 100% yellow. Not the same at all.
    HOWEVER: if I convert the original logo .ai file to CMYK it converts it to my favourite 53% magenta, 100 % yellow.
    I know that I am the one failing here, failing to understand colour consistency, but I would be grateful for a simple explanation.
    To summise why does Pantone Orance 21c convert to two different CMYK (one 53% Magenta & 100% Yellow and the other 83% magenta and 100% yellow) depending on which document I convert that colour to CMYK in?

    Thankyou
    I ca't find any differences between colour profiles. The proof preview sheds no light either on the documents where it's dark orange, it's dark orange and vice versa. Although I may not be checking correctly.
    I've been working non-stop 5 am starts every morning for the last two weeks, I think I may struggle peeling a banana at the moment.
    If I open the original .ai file sent to me by the client and click on a section of orange and check the colour it states it's Pantone Orange 021 c, if I then click convert to CMYK I get 53% M, 100% Y.
    If I open a NEW DOCUMENT in illustrator and create an obejct and fill it with Pantone Orange 021 c, if I then click convert to CMYK I get 83% M, 100% Y.
    I must be working with different document settings, but can't for the life of me work out where to check!!
    Seeing as the document has to be sent converted to CMYK would it be safer to use the original documents converted CMYKM 53% M 100% Y. On screen this appears the closest?

  • AT&T network so bad it lies about entire cities!!

    Okay, I'm a phone nerd/tester you can say. BEFORE you reply: I put a line in this post to signify that the part after the lines where all just tests j did and not necessary to read to understand what I'm saying. You can read just everything above the line before replying. NOW back on topic: I test all four of the MAJOR carriers: Verizon, AT&T, Sprint, and T-Mobile and am SHOCKED to find AT&T coverage maps are the biggest scam and lie in wireless HISTORY!! I've spent at least 20 hours, in this last month testing all 4 carriers. I live in Colorado so rural coverage is important.
    I also used an external Wilson 4G booster when any phone had a poor signal, and it works great. In the booster it normally gains 2 bars and 15DB to 20db improvement in field test mode. Also speeds can go from 1mbps up to 30mbps in some areas in the booster.
    I'll start off with this: if you check AT&T data coverage for Colorado you'll see it claims it covers roughly 95% of the LAND MASS (not population but pure land mass) of the State of Colorado. Now here's the thing: roughly 50% of the land mass of Colorado is completely uninhabited and Extremely
    Remote and desolate areas where no one lives for 50 to 100 miles just dirt and grass in these areas. So the FACT that AT&T claims they cover all these areas is proof itself they are lying on a GRAND scale already about 50% of their entire coverage map -- right off the bat!! If you look at Big Red they show they cover roughly 50% of the land mass of Colorado, which is correct as the other 50% land mass is uninhabited. So AT&T is lying right in front of everyone on a GRAND scale (we are talking HALF of an entire States coverage map is undeniable lying due to the fact most of Colorados land is uninhabited but AT&T shows coverage there). That's' 50,000 square miles that AT&T is lying about just looking at their coverage map for Colorado. That's HUGE. Insane. Crazy. Beyond error, just flat out lying at that point no computer projections can be wrong or miscalculate 50% of an entire state.
    The worst part is I've tested over 20 cities/towns/highways/landmarks where AT&T shows full solid 4G coverage, but when I go there I get NO SERVICE AT ALL, in any direction for countless miles!! I even put it inside a external signal booster and it will sometimes pick up 1-2 bars of 4G. Problem? It had 100% failure rate on calls, texts, and on data. I even tried to let webpages load for 5++ mins before the phone kicked me off saying "no internet connection". Siri didn't work. Speed Test said no connection. So even when it picked up False 4G signal indicators it failed 100% of the time. Or actually 99% of time. One call out of over 200+ test calls -- one call -- while inside a Wilson cradle booster and reading 2 bars of 4G it called 611 for 11
    Seconds then dropped it. I tried data right after and it refused to connect 100% of the time. I did all the usual: turning phone off then back on, Power-cycling the iPhone, put it in airplane mode for 30 seconds then back on, tried turning cellular off then back on -- it still had 100% failure rate....
    Now if you want to keep reading here are some examples I have:
    #1: AT&T is the only carrier who claims they have 4G coverage in parts of Colorado where no one lives for 50 miles in any direction. It's just dirt and grass there!! All other carries maps show no service, but ATT shows coverage on nearly every inch of land. Seriously. Another real example: AT&T shows it has 4G for roughly 80% of the drive on Rampart range road all the way to Denver; which travels through the Pikes Peak National forest. Then it claims it covers the other 20% with either LTE, 3G, EDGE, or roaming. So it shows 100% coverage on that 70 mile+ windy mountain road that goes into the forest. Problem and reality? Problem: towers are illegal in Narional forests so no one can have 100% coverage deep into it, but ATT says it does. Reality? It losses ALL signal (not even 1 bar of anything) within 0.1 miles of getting into the road!! It keeps no service for the entire 3 hour+ drive even though it's maps claim 4G all over. Wow, that's a insane difference. 3-4 hours of no service at all when thy claim 4G??
    Now: Verizon/Sprint/T-Mobile all show No Service on this road into their forest on their maps. Again ATT is the only one lying about a massive stretch of land that take hours to drive through.
    #2: To add insult to injury I put AT&T into that 4G external booster on this 3+ hour drive (remember AT&T claims it covers every inch of this area with mostly 4G and some roaming toward the end).
    RESULTS? No service the ENTIRE DRIVE
    Every now and then inside the signal booster it would pop up showing "1-2 bars of 4G", which I would immediately attempt both the Internet and phone calls/texts. Results? All intent failed saying no connection even when AT&T would show 4G every now and then, and it FAILED to even dial out on 100% of all phone calls, and all text messages had 100% failure rate. The only time AT&T worked on this 3+ hour drive? When it one time read 4G with 3 bars it called 611 and dropped it 10 seconds later. Internet again failed to work at all.
    Overall results: AT&T had NO SERVICE AT ALL 99% of the time and 1% of the time it picked up a 4G signal but it failed to work every time, and it only picked it up in a signal booster and but still failed to work!! Now this wouldn't be a problem if AT&T maps didn't claim it covered 100% of this 3 hour+ road with 4G coverage.
    #3: Florrisant, Colorado: AT&T shows blanket full 4G coverage for the city. Reality? It gets 4G when you pass the city on the highway, but then the city heads south on the highway to actually get to it. Results? NO SERVICE AT ALL anywhere in the city. I drove all over and nothing! I can't believe they claim the entire city is covered in 4G but reality is no service. So I tried to put it in a signal booster.
    Results? Exactly the same no service ANYWHERE, but the phone has "false indicators" sometimes saying 1-3 bars or 4G but it failed 100% of the time for data connection or phone calls. I go to this city
    Semi- frequently so I was SHOCKED to find it had no service anywhere for dozens of miles -- even inside a Signal booster. Glad I didn't get rid of Verizon because I wanted AT&T more, but if I did I'd have no service in nearly all rural areas I go to! BTW Verizon had LTE out here even though it showed I was in a 3G area with limited 4G LTE.
    Sprint had roaming service that worked. T-mobile did not work because their maps showed roaming and that was based off AT&T's coverage maps, which ATT lied about this entire city and the multiple highways near it!! NOW: I could **somewhat** understand if AT&T showed "2G roaming for entire city" and I went to that city and it had no service anywhere in the city. I could maybeee understand that. But claiming full solid 4G coverage and in reality having NO SERVICE AT ALL in the entire city!?! That's beyond scam, that's beyond "map's coverage Miscalculation" -- this is flat out lying about entire cities and entire highways.
    #4: Rye, Colorado. Same story as above. Now their maps do show 4G all over for data but their voice coverage says requires 3G device likely meaning they have 1900 frequency out there. BUT STILL: they lied about that entire city too.
    #5: I could name about 20 other cities, towns, highways, and landmarks but it would take hours to post. So far every single rural area test I have done in Colorado AT&T has failed in ALL CITIES with NO SERVICE, when their maps claimed they had solid 4G in every place!! Myself personally I have found 20 large areas AT&T claims full solid 4G coverage but in reality they have nothing at all, not even 1 bar of service. This is crazy. AGAIN: I tested all other carriers and no one else's map claim they have 4G coverage in entire cities and highways when reality they have nothing at all!! AT&T maps where roughly 5X + more inaccurate than everyone else.

    AT&T coverage is smaller than maps online but if you compare it to national carriers, it is second only to Verizon in the USA and allows for larger global scale than Verizon.
    I am having an issue now with View account not working and data previously not working on my tower which got a little better here as posted in another forum. But view account is still down for multiple days now and I told AT&T but no resolution as of yet. Service works well on the interstate highway system in populated areas.
    I am not sure why they lie on coverage areas on their map, but from a consumer perspective the choices are Verizon or AT&T for large scale domestic as others are not competitive. AT&T just wants to make their network look even better than it is, but if population centers developed in rural markets, you can be sure AT&T would roll out a tower in those communities.
    So even with the flaws I am experiencing on AT&T there are workarounds fortunately. You can not expect coverage everywhere on land based wireless. You need satellite or a hybrid land/wireless for complete coverage. AT&T does extremely well for wireless services. It does better than Verizon in some markets and worse in others.
    AT&T does like to embelish its map whether intentionally or maybe it goes by actual license holdings and/or partners. But it is well known and over 100 million people will continue to use AT&T even fully knowing this.

  • V I Engineering, Inc has immediate needs for Systems Engineers and Senior Systems Engineers (reporting to the Test Software and Integration Group Manager)

    Company: V I Engineering, Inc.
    Locations: Positions available in our Farmington Hills, MI Office
    Salary/Wage: $negotiable
    Status: Full Time, Employee
    Relevant Work Experience: 5+ years system integration (LabVIEW/TestStand experience preferred, but not required)
    Career Level: Intermediate (Non-Manager)
    Education Level: Bachelor's Degree
    Residency/Citizenship: USA Citizenship or Greencard required
    Driving Business Results through Test Engineering
    V I Engineering, Inc. has a vision for every client we engage. That vision is to achieve on-time and on-budget program launch more efficiently that the competition. To realize this vision, customers need to achieve predictable test systems development, eliminate waste in test information management, and drive increased leverage of test assets. An underlying requirement for all of these areas is metrics tracking and measurement based decision making.
    Job Description
    Ready to make a difference? Bring your experiences and skills to the industry leading test organization. Help us to continue to shape the way the world views test. We are seeking a talented Systems Engineer to be responsible for technical execution of successful projects in the Medical, Military, Transportation, Consumer Electronics and Aerospace Industries. The position will have high visibility to customers and vendors. This is a very fast paced team with close customer contact and strong career development opportunities. A large part of the position is to identify, own and drive technical design and development of test systems. You will work alongside other like-minded and equally talented engineers, and be creative in a fast-paced and flexible environment that encourages you to think outside the box.
    Required
    5+ years of Systems Integration experience
    Experience in Design and Implementation of Test Systems, including integration
    Experience in ATE usage and development
    Experience in reviewing of Mechanical Fixtures
    Experience in understanding the design of Circuit Boards as they relate to a total system
    Experience in Taking Part in Technical Teams throughout All Phases of Project Lifecycle
    Experience in Interfacing with Sub-vendors and Customers
    Ability to Multitask
    Comfortable Working on Various Team Sizes
    Excellent Communication Skills
    Desired
    Requirements generation and review experience
    National Instruments Hardware knowledge
    LabVIEW/TestStand experience
    Experience with Source Code Control (SCC)
    Experience executing verification and validation for projects
    Experience generating and/or reviewing cost proposals
    RF Technology (DAQ, General RF Theory)
    FPGA (with LabVIEW)
    Professional software engineering processes and metrics experience (statement coverage, code size, reuse measurement, etc)
    TortoiseSVN
    V I Package Manager (VIPM)
    UML
    Experience with Projects for Regulated Industries
    MS Project
    Formal Education
    Technical degree (BS Engineering, Computer Science, Physics, Math)
    National Instruments Courses a plus
    National Instruments certification a plus
    Notes:
    Expected Travel Time is up to 25%Re
    location assistance is possible.
    V I Engineering, Inc. offers incredible opportunities to grow and advance your career, a dynamic work environment and the flexibility of a small company.
    The Test Software and Integration Group values innovation, out-of-the-box thinking, high-tech toys and a fun / amazingly collaborative working environment. We're a National Instruments Select Integrator, and we're the closest you can get to playing with all the pre-released and new NI toys without joining the NI R&D team - and we get to play with them in the real world.
    To apply for this position, email a cover letter and resume to [email protected] with the subject "TSIG Systems Engineer employment application".
    Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

    Edit
    Jeff

  • [solved] Can no longer untar AUR packages with tar xvf /directory/

    For about a year now I've used this line of code from my .bash_aliases file to untar files from their source directory to the one I am currently CDed in at that moment: 
    alias tarx='tar xvf' # extracts files from a tarball using tar [e]x[tract] v[erbose] f[orced]
    This alias failed to work a few weeks ago for some unknown reason and now spits out this error:
    tarx /media/aur/srcpackages/atom-editor.tar.gz ./
    tar: .: Not found in archive
    tar: Exiting with failure status due to previous errors
    Why on earth would this suddenly stop working.  I haven't changed my .bashrc file apart from some small comments but here it is in case I'm totally out of it:
    # ~/.bashrc
    # This file is sourced by all *interactive* bash shells on startup, #
    # including some apparently interactive shells such as scp and rcp #
    # that can't tolerate any output. So make sure this doesn't display #
    # anything or bad things will happen ! #
    # If not running interactively, don't do anything #
    [[ $- != *i* ]] && return
    # If the connection to the system is a remote connection 'ssh' will be #
    ## appended to the prompt. Otherwise the prompt will be displayed normally #
    # See: remote.colourful.prompt_how-to on /media/lynwyn/networking/ssh #
    # Default prompt from the above-named document: #
    # export PS1='\[\e[0;31m\]\u@\h:\w${text}$\[\e[m\]' # # #
    if [ -n "$SSH_CLIENT" ]; then text=":ssh:"
    fi
    # Alias definitions.
    # You may want to put all your additions into a separate file like
    # ~/.bash_aliases, instead of adding them here directly.
    # See /usr/share/doc/bash-doc/examples in the bash-doc package.
    if [ -f ~/.bash_aliases ]; then
    . ~/.bash_aliases
    fi
    ### [User Prompts]
    ### White Yunzi
    export PS1='\[\e[0;37m\]: \[\e[1;92m\]\W\[\e[0;37m\] :\[\e[m\] \[\e[0;37m\]'
    #### Silver Yunzi
    #export PS1='\[\e[0;37m\]: \[\e[1;94m\]\W\[\e[0;37m\] :\[\e[m\] \[\e[0;37m\]'
    ### Pink Yunzi
    #export PS1='\[\e[0;37m\]: \[\e[1;95m\]\W\[\e[0;37m\] :\[\e[m\] \[\e[1;95m\]'
    ### [Root Prompts]
    ### White Yunzi Root
    #export PS1='\[\e[1;37m\]:\[\e[1;92m\]\u\[\e[1;37m\]:\[\e[1;92m\]\W\[\e[1;37m\]:\[\e[m\] \[\e[0;37m\]'
    ### Silver Yunzi Root
    #export PS1='\[\e[0;37m\]:\[\e[1;94m\]\u\[\e[0;37m\]:\[\e[1;94m\]\W\[\e[0;37m\]:\[\e[m\]\[\e[0;37m\]'
    ### Pink Yunzi Root
    #export PS1='\[\e[0;37m\]:\[\e[1;95m\]\u\[\e[0;37m\]:\[\e[1;95m\]\W\[\e[0;37m\]:\[\e[m\] \[\e[0;37\]'
    ### * BASH options * ###
    ### Last edited January 2014 by H.L.
    # Bash won't get SIGWINCH if another process is in the foreground.
    # Enable checkwinsize so that bash will check the terminal size when
    # it regains control.
    # [check the window size after each command and, if necessary,
    # update the values of LINES and COLUMNS.]
    # http://cnswww.cns.cwru.edu/~chet/bash/FAQ (E11)
    shopt -s checkwinsize
    # automatically prepend cd when entering just a path in the shell
    shopt -s autocd
    # Enable history appending instead of overwriting.
    shopt -s histappend
    # for setting history length see HISTSIZE and HISTFILESIZE in bash(1)
    HISTSIZE=10000
    HISTFILESIZE=20000
    ## erase duplicate entries in your history file
    ## and force Bash History to ignorespace
    export HISTCONTROL=erasedups:ignorespace
    # set variable identifying the chroot you work in (used in the prompt below)
    #if [ -z "$arch_chroot" ] && [ -r /etc/arch_chroot ]; then
    # debian_chroot=$(cat /etc/arch_chroot)
    #fi
    # make "less" more friendly for non-text input files, see lesspipe(1)
    [ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)"
    # TMUX
    # Put this this snippet BEFORE the aliases in .bashrc.
    # This code starts TMUX with only one session (unless you start some manually), on login;
    # it will try to attach to a currently running session.
    # If there isn't a currently running session then TMUX will create one.
    # if which tmux 2>&1 >/dev/null; then
    # if not inside a tmux session, and if no session is started start a new session
    # test -z "$TMUX" && (tmux attach || tmux new-session)
    # fi
    # environment variables using gedit and nano
    export EDITOR="$(if [[ -n $DISPLAY ]]; then echo 'gedit'; else echo 'nano'; fi)"
    ### Coloured man pages with explanations of colours in comments
    # Note to self: all of the colour & escape statements work ONLY by using double quote marks, e.g. " ... "
    ## Coloured man pages with explanations of colours in comments
    # 67: Primary colour for program names is Dark Green [old 80's CRT green!]
    # 68: Optional arguments and/or separate options for arguments is Bright Green
    # 69: Text Reset
    # 70: Text Reset
    # 71: man page info bottom of page is Dark Red on Black background (net effect is transparent background with red writing)
    # 72: Text Reset
    # 73: References to other programs (and their respective man page(s)) are Bright Yellow [good neutral yellow]
    man() {
    env LESS_TERMCAP_mb=$(printf "\e[1;31m") \
    LESS_TERMCAP_md=$(printf "\e[1;31m") \
    LESS_TERMCAP_me=$(printf "\e[0m") \
    LESS_TERMCAP_se=$(printf "\e[0m") \
    LESS_TERMCAP_so=$(printf "\e[1;44;33m") \
    LESS_TERMCAP_ue=$(printf "\e[0m") \
    LESS_TERMCAP_us=$(printf "\e[1;32m") \
    man "$@"
    ## To get a skin of your choice loaded instead of mc's default
    ## skin, you might consider the following solution:
    ## Multi-User: Create an alias for mc in your ~/.bashrc, like:
    if [ $TERM = "screen-256color" ]; then
    if [ $USER = "root" ]; then
    myMCSkin="modarcon16root-defbg"
    else
    myMCSkin="modarcon16-defbg"
    fi
    alias mc='mc --skin $myMCSkin'
    alias mcedit="mcedit --skin $myMCSkin"
    alias mcview="mcview --skin $myMCSkin"
    alias mcdiff="mcdiff --skin $myMCSkin"
    fi
    Last edited by MoonSwan (2014-07-09 04:31:06)

    I seem to have a larger problem on my desktop machine.  When I try to untar stuff on that one it creates a .cache directory for some weird reason and populates it with, I think, cached files from my home directory.  It ends up having firefox, mc and other cached files in the new directory and then tar just errors out with:
    gzip: stdin: unexpected end of file
    tar: Unexpected EOF in archive
    tar: Unexpected EOF in archive
    tar: Error is not recoverable: exiting now
    Very odd behaviour and I'm assuming some config file somewhere is responsible for this behaviour.  But where else can I look apart from .bashrc? 
    @ids1024, I'll do what you've what you suggested on my netbook later today and record the information to post afterward.
    [edit] Here are the contents of that .cache directory, if it helps:
    dconf event-sound-cache.tdb.silver_yunzi.x86_64-unknown-linux-gnu event-sound-cache.tdb.tengen.x86_64-unknown-linux-gnu fontconfig mc dmenu_run
    event-sound-cache.tdb.silveryunzi.x86_64-unknown-linux-gnu event-sound-cache.tdb.white_yunzi.x86_64-unknown-linux-gnu gstreamer-1.0 mozilla
    Last edited by MoonSwan (2014-06-28 19:57:10)

  • [Solved] Cannot "su" properly in a terminal due to a .bashrc error

    The problem is simple:  I cannot su to my root account properly.  I can do so successfully in that I can become "root" but I get no output on the screen after typing in a command.  E.g., this is what my terminal shows after su'ing to root and typing the "ls" command:
    : ~ : su
    Password:
    :root:~: ls -a
    :root:~:
    Even trying to bring up a nano window gives the same result:
    :root:~: nano .bashrc
    :root:~:
    I get this behaviour in RoxTerm but in Xfce-Terminal I get this error instead:
    : ~ : su
    Password:
    -bash: printf: write error: Broken pipe
    Broken pipe (core dumped)
    : ~ :
    I have received the same error in the past in RoxTerm but it seems to have gone away today.  I did Google that error but I found nothing that seemed to point to a solution for this issue.  And, after a lot of experimentation and troubleshooting, I've narrowed down my issue to an error in my .bashrc file.  However, despite combing through it several times, and finding other errors, I still can't locate what is causing this issue.
    My .bashrc:
    ### ====== .bashrc + all prompts = a common config file for all ======
    ### Created Saturday 04 October 2014
    ## See [[ssh:ssh prompts]] for SSH
    # [[~/.bashrc]]
    ### Last edited October 2014 by H
    # ===================================================================================================
    # This file is sourced by all *interactive* bash shells on startup,
    # including some apparently interactive shells such as scp and rcp
    # that can't tolerate any output. So make sure this doesn't display
    # anything or bad things will happen!
    # If not running interactively, don't do anything.
    [[ $- != *i* ]] && return
    # ===================================================================================================
    # Alias definitions.
    # You may want to put all your additions into a separate file like
    # ~/.bash_aliases, instead of adding them here directly.
    # See /usr/share/doc/bash-doc/examples in the bash-doc package.
    if [ -f ~/.bash_aliases ]; then
    . ~/.bash_aliases
    fi
    # ===================================================================================================
    # Below are the color init strings for the basic file types. A color init string consists of one or more of the following numeric codes:
    # Attribute codes:
    # 00=none 01=bold 04=underscore 05=blink 07=reverse 08=concealed
    # Text color codes:
    # 30=black 31=red 32=green 33=yellow 34=blue 35=magenta 36=cyan 37=white
    # Background color codes:
    # 40=black 41=red 42=green 43=yellow 44=blue 45=magenta 46=cyan 47=white
    ## Now source the .dir_colors file to use those colours!
    if [ -x /usr/bin/dircolors ]; then
    test -r ~/.dir_colors && eval "$(dircolors -b ~/.dir_colors)" || eval "$(dircolors -b)"
    fi
    # ===================================================================================================
    ### [User Prompts]
    ## Very fancy ##
    #export PS1='\[\033[0;32m\]┌┼─┼─ \[\033[0m\033[0;32m\]\u\[\033[0m\] @ \[\033[0;36m\]\h\[\033[0m\033[0;32m\] ─┤├─ \[\033[0m\]\t \d\[\033[0;32m\] ─┤├─ \[\033[0;34m\]\w\[\033[0;32m\] ─┤ \n\[\033[0;32m\]└┼─\[\033[0m\033[0;32m\]\$\[\033[0m\033[0;32m\]─┤▶\[\033[0m\] '
    ## Very fancy with $ removed
    #export PS1='\[\033[0;32m\]┌┼─┼─ \[\033[0m\033[0;32m\]\u\[\033[0m\] @ \[\033[0;36m\]\h\[\033[0m\033[0;32m\] ─┤├─ \[\033[0m\]\t \d\[\033[0;32m\] ─┤├─ \[\033[0;34m\]\w\[\033[0;32m\] ─┤ \n\[\033[0;32m\]└┼─\[\033[0;32m\]─┤▶\[\033[0m\] '
    ### White Yunzi
    export PS1='\[\e[0;37m\]: \[\e[1;92m\]\W\[\e[0;37m\] :\[\e[m\] \[\e[0;37m\]'
    #### Silver Yunzi
    #export PS1='\[\e[0;37m\]: \[\e[1;94m\]\W\[\e[0;37m\] :\[\e[m\] \[\e[0;37m\]'
    ### Pink Yunzi
    #export PS1='\[\e[0;37m\]: \[\e[1;95m\]\W\[\e[0;37m\] :\[\e[m\] \[\e[0;37\]'
    #### Red Yunzi
    #export PS1='\[\e[0;37m\]: \[\e[1;91m\]\W\[\e[0;37m\] :\[\e[m\] \[\e[0;37m\]'
    ### [Root Prompts]
    ### White Yunzi Root
    #export PS1='\[\e[1;37m\]:\[\e[1;92m\]\u\[\e[1;37m\]:\[\e[1;92m\]\W\[\e[1;37m\]:\[\e[m\] \[\e[0;37m\]'
    ### Silver Yunzi Root
    #export PS1='\[\e[0;37m\]:\[\e[1;94m\]\u\[\e[0;37m\]:\[\e[1;94m\]\W\[\e[0;37m\]:\[\e[m\]\[\e[0;37m\]'
    ### Pink Yunzi Root
    #export PS1='\[\e[0;37m\]:\[\e[1;95m\]\u\[\e[0;37m\]:\[\e[1;95m\]\W\[\e[0;37m\]:\[\e[m\] \[\e[0;37\]'
    ### Red Yunzi Root
    #export PS1='\[\e[0;37m\]:\[\e[1;91m\]\u\[\e[0;37m\]:\[\e[1;95m\]\W\[\e[0;37m\]:\[\e[m\] \[\e[0;37\]'
    # ===========================================================================================================================================
    ### If the connection to the system is a remote connection 'ssh' will be
    ### appended to the prompt. Otherwise the prompt will be displayed normally.
    # See: remote.colourful.prompt_how-to on /media/lynwyn/networking/ssh
    #### White Yunzi ###
    # : ~ : ssh :
    if [ -n "$SSH_TTY" ] || [ -n "$SUDO_USER" ] ; then
    PS1="$PS1"ssh\ :\ ""
    fi
    # ================**OR**===========================================================================================================================
    # : ~ : :ssh:
    #export PS1='\[\e[0;37m\]: \[\e[1;92m\]\W\[\e[0;37m\] :\[\e[m\]\[\e[0;37m\]'
    #if [ -n "$SSH_TTY" ] || [ -n "$SUDO_USER" ] ; then
    # PS1="$PS1:ssh:"
    #fi
    # ===========================================================================================================================================
    ### Silver Yunzi ###
    # :~::ssh:
    #export PS1='\[\e[0;37m\]:\[\e[1;94m\]\W\[\e[0;37m\]:\[\e[m\]\[\e[0;37m\]'
    #if [ -n "$SSH_TTY" ] || [ -n "$SUDO_USER" ] ; then
    # PS1="$PS1":ssh: ""
    #fi
    # ===========================================================================================================================================
    ### Pink ###
    # :~:ssh:
    #export PS1='\[\e[0;37m\]:\[\e[1;95m\]\W\[\e[0;37m\]:\[\e[m\]\[\e[0;37m\]'
    #if [ -n "$SSH_TTY" ] || [ -n "$SUDO_USER" ] ; then
    # PS1="$PS1"ssh: ""
    #fi
    # ===========================================================================================================================================
    ### Red ###
    # :~:ssh:
    #export PS1='\[\e[0;37m\]:\[\e[1;91m\]\W\[\e[0;37m\]:\[\e[m\]\[\e[0;37m\]'
    #if [ -n "$SSH_TTY" ] || [ -n "$SUDO_USER" ] ; then
    # PS1="$PS1"ssh: ""
    #fi
    # ===================================================================================================
    #### * BASH options * ###
    # Bash won't get SIGWINCH if another process is in the foreground.
    # Enable checkwinsize so that bash will check the terminal size when it regains control.
    # [check the window size after each command and, if necessary, update the values of LINES and COLUMNS.]
    # http://cnswww.cns.cwru.edu/~chet/bash/FAQ (E11)
    shopt -s checkwinsize
    # ===================================================================================================
    # automatically prepend cd when entering just a path in the shell
    shopt -s autocd
    # ===================================================================================================
    # Enable history appending instead of overwriting.
    shopt -s histappend
    # ===================================================================================================
    # for setting history length see HISTSIZE and HISTFILESIZE in bash(1)
    HISTSIZE=10000
    HISTFILESIZE=20000
    # ===================================================================================================
    ## erase duplicate entries in your history file
    ## and force Bash History to ignorespace
    export HISTCONTROL=erasedups:ignorespace
    # ===================================================================================================
    ## This will prevent you from over-writing any file that you direct to with the ">" or ">>" symbols, thus destroying whatever pre-existing file
    ## you're pointing to in the first place. This tweak prevents that from happening and ">" or ">>" will fail when directed at an existing file.
    ## To clobber the existing file you have to use ">|" which is much harder to type by accident.
    set -o noclobber
    ===========================================================================================================================================
    ## Set variable identifying the chroot you work in (used in the prompt below)
    #if [ -z "$arch_chroot" ] && [ -r /etc/arch_chroot ]; then
    # debian_chroot=$(cat /etc/arch_chroot)
    #fi
    # ===================================================================================================
    # environment variables using gedit and nano
    export EDITOR="$(if [[ -n $DISPLAY ]]; then echo 'gedit'; else echo 'nano'; fi)"
    # ===================================================================================================
    ### Colored output through environment variables
    ### Add the following lines to your shell configuration file @ ~/.bashrc:
    ### List of colors for prompt and Bash: http://en.wikipedia.org/wiki/ANSI_escape_code#Colors
    ### See the web page above for a complete listing of all the colours applicable to these environments:
    ### Standard VGA colors / Windows XP CMD / Terminal.app / PuTTY / xterm / CSS/HTML / X
    #export LESS=-R
    #export LESS_TERMCAP_me=$(printf '\e[0m')
    #export LESS_TERMCAP_se=$(printf '\e[0m')
    #export LESS_TERMCAP_ue=$(printf '\e[0m')
    #export LESS_TERMCAP_mb=$(printf '\e[1;32m')
    #export LESS_TERMCAP_md=$(printf '\e[1;34m')
    #export LESS_TERMCAP_us=$(printf '\e[1;32m')
    #export LESS_TERMCAP_so=$(printf '\e[1;44;1m')
    ### Coloured man pages with explanations of colours in comments
    # Note to self: all of the colour & escape statements work ONLY by using double quote marks, e.g. " ... "
    ## Coloured man pages with explanations of colours in comments
    # 67: Primary colour for program names is Dark Green [old 80's CRT green!]
    # 68: Optional arguments and/or separate options for arguments is Bright Green
    # 69: Text Reset
    # 70: Text Reset
    # 71: man page info bottom of page is Dark Red on Black background (net effect is transparent background with red writing)
    # 72: Text Reset
    # 73: References to other programs (and their respective man page(s)) are Bright Yellow [good neutral yellow]
    man() {
    env LESS_TERMCAP_mb=$(printf "\e[1;31m") \
    LESS_TERMCAP_md=$(printf "\e[1;31m") \
    LESS_TERMCAP_me=$(printf "\e[0m") \
    LESS_TERMCAP_se=$(printf "\e[0m") \
    LESS_TERMCAP_so=$(printf "\e[1;44;33m") \
    LESS_TERMCAP_ue=$(printf "\e[0m") \
    LESS_TERMCAP_us=$(printf "\e[1;32m") \
    man "$@"
    # ===================================================================================================
    ## To get a skin of your choice loaded instead of mc's default
    ## skin, you might consider the following solution:
    ## Multi-User: Create an alias for mc in your ~/.bashrc, like:
    if [ $TERM = "screen-256color" ]; then
    if [ $USER = "root" ]; then
    myMCSkin="modarcon16root-defbg"
    else
    myMCSkin="modarcon16-defbg"
    fi
    alias mc='mc --skin $myMCSkin'
    alias mcedit="mcedit --skin $myMCSkin"
    alias mcview="mcview --skin $myMCSkin"
    alias mcdiff="mcdiff --skin $myMCSkin"
    fi
    # ===================================================================================================
    # TMUX
    # Put this this snippet BEFORE the aliases in .bashrc.
    # This code starts TMUX with only one session (unless you start some manually), on login;
    # it will try to attach to a currently running session.
    # If there isn't a currently running session then TMUX will create one.
    # if which tmux 2>&1 >/dev/null; then
    ## if not inside a tmux session, and if no session is started start a new session
    # test -z "$TMUX" && (exec qterminal -e bash -c "tmux -q has-session && exec tmux attach-session -d || exec tmux new-session -n $USER -s $USER")
    # fi
    # ===================================================================================================
    Edit: fixed a few typos
    Last edited by MoonSwan (2014-10-25 01:22:52)

    Thank you very much for the response Jason and I am sorry for the late reply but as usual life got in the way.
    I ended up doing some more experimentation and I did fix the bug you pointed out.  When this didn't solve the problem I started to look at other files.  It turned out that my .bash_aliases file was the real culprit.  The offending line was:
    alias su='su -l | cd ~/' # invokes a login shell then changes to root's home directory
    I fixed the issue by changing that line to read:
    alias su='su -l ' # invokes a login shell then changes to root's home directory
    As always thank you for the help, 

  • Im on bt infinty 2 ...but my upload speed has plum...

    hello,
    i wonder if anyone can help me.  i changed ftom regular bt internet 19 meg d.l spees to bt infinity 2 a few months back.  I was told i would get between 35 meg all the way up to 52 meg d/l speedsa and between 9 meg and 19 meg upload speed .
    But in the last 2 weeks ive been gettin anything from 24 meg to 39 meg down and my upload speed has plumited from 6 or 7 meg right down to 0.7 meg . Since this has happend my online experience with the ps4 and xbox has somehow suffered and i get lag all the time in all games. a friend told me thats online gaming relies on on the upload speed and 0.7 will not be very good.
    ive been on the live chat with a guy. he states that bt promised minimum 35 meg " with an average of 25mb d/l" and that they never promise any speeds on the up load part of things.
    Ive done a bt line test . on the left is a nice glowing green colour with a 39 meg d/l speed from the exchange to my house ...then on the other side is a amber typt colour that states im getting 29 meg d/l and 0.5 upload .  Ive reset the router and done all the steps at the bottom but its still the same.
    When i download a game on steam it normally does 3.9 meg to 4.4 meg download speed which is very good for me but now its on 1.5 - 1.7 meg.
    can anyone on here please help or advise? bt live chat just wants to tell me theres nothing they can do and that they didnt promise me this and that.
    thanks helen

    here are my details.
       1. Product Name: HomeHub52. Serial number: +076284+14310042143. Firmware version: v0.07.03.0814-BT (Type B) Last updated 3/12/20144. Board version: 015. VDSL uptime: 0 days, 13:59:586. Data Rate: 793 / 392447. Maximum Data Rate: 808 / 500318. Noise Margin: 7.8 / 7.69. Line Attenuation: 0.0 / 26.010. Signal Attenuation: 0.0 / 0.011. Data sent/received: 431.7 MB / 12.1 GB12. Broadband username: [email protected] BT Wi-fi: Yes14. 2.4GHz wireless network/SSID: BTHub5-J3HQ15. 2.4GHz wireless connections: Enabled (802.11 b/g/n (up to 144 Mb/s))16. 2.4GHz wireless security: WPA2 Only (Recommended)17. 2.4GHz wireless channel: Automatic (Smart Wireless)18. 5GHz wireless network/SSID: BTHub5-J3HQ19. 5GHz wireless connections: Enabled (802.11 a/n/ac (up to 1300 Mb/s))20. 5GHz wireless security: WPA2 Only (Recommended)21. 5GHz wireless channel: Automatic (Smart Wireless)22. Firewall: Default23. MAC Address: 18:83:bf:67:e6:d624. Software variant: -25. Boot loader: 0.4.3-BT (Fri May 30 23:34:17 2014)
    BT Home Hub 5 (Type B) | Software version v0.07.03.0814-BT  | Last updated 3/

  • How to centre down state image and fix back ground to a plain colour

    hi please view this website with internet explorer , windows XP. viewers see a down state image that I set but its not centred and also sits over the navigation. I had screen cover on the background image, so this does not look correct either in non html5 compliant browsers.
    http://reynell.org.au/test
    I would like to specify in the down state that there is just a plain colour background rather than an ill fitting image.
    hoping someone from the adobe team can answer my question, or any edge user who knows!
    thanks

    Hello,
    This effect can only be achieved when you use the images as a Rectangle Fill. And as you mentioned it above, you cannot add alternative text to images because it is added as a fill and not as a image.
    I would suggest you to post this as a feature request on our "Ideas for features in Adobe Muse" section of the forums : http://forums.adobe.com/community/muse/ideas
    Regards,
    Sachin

  • Unwanted text outline colour in highlighted button state

    Hi DVDSP geniuses and much thanks in advance!
    I'm getting unwanted colour at the edges of text in buttons in selected and activated states. I'm using a non-layered menu and a greyscale jpeg for background, a greyscale jpeg for overlay with simple colours.
    The overlay is black text on white and I'm creating buttons from the text. In the selected and activated states for buttons unwanted, pixelated outlines appear on the edges of the text, often in a colour I haven't selected for any of these states.
    Can anyone help please?
    Many thanks

    I usually prefer picts or tifs for overlays. Are the pixels that you are seeing jaggedy edge types text edges or more like you are getting a glow? The edge of text can be a bear, but a drop shawod or stroke may help. (Did you do this in Photoshop) Also some text types/colors are more prone to issue (smaller fonts).
    As to the color, did you somehow assign a different map set to the buttons? You can have three sets on a menu and if somehow adjusted a set for a button it could happen....(are the colors consistent on the menus, meaning it is always red or blue, let's say, on the menu where you expected yellow? (used three colors in case three sets snuck in.)

  • Is there a way to make an anchor link display a different colour when selected? (active state)

    I have a vertically scrolling site I am trying to set up, and it's all going well. Only problem is when you use the menu (widget or non-widget) to move to an anchor link, thus bringing in the next section, I can't get the link to diplay as a different colour.
    This would be good for letting the user know what section is infront of them.
    Is there a way to do this?
    One other question: Is there a way to get an anchor link to display centrally in the middle of the page up and down. I can arrange it so it looks good in one browser window, but as soon as the user has more vertical space it seems to diplay a set distance from the top. I guess what I'm asking is can the anchor link define the center point instead of the top point?
    Many thanks!

    Hello,
    Could you please elaborate what exactly you are referring to with "I can't get the link to diplay as a different colour"?
    Regarding your second query, I am afraid it is not possible using Adobe Muse. However it can be a very nice feature request.
    I would suggest you to post this as a feature request on our "Ideas for features in Adobe Muse" section of the forums : http://forums.adobe.com/community/muse/ideas
    Regards,
    Sachin

  • Folder & collection state/colour/tagging

    There is an extensive thread on this topic already - http://feedback.photoshop.com/photoshop_family/topics/colour_coding_folders_and_collection s_to_simplify_navigation_cataloguing - so I won't repeat it all here, but the continued absence of any way to keep track of what state I've left each folder of photos in is a source of constant annoyance and inefficiency in my workflow, as I often have up to 10 sets of unprocessed photos on the go, and I have to rely on manual methods (e.g. post it notes or renaming folders) to remind myself where I am with each one.
    Addressing this in LR4 would have a huge positive impact on my productivity and organisation - please consider doing so, it's disappointing and surprising that it's not already present in the LR4 beta.

    There is an extensive thread on this topic already - http://feedback.photoshop.com/photoshop_family/topics/colour_coding_folders_and_collection s_to_simplify_navigation_cataloguing - so I won't repeat it all here, but the continued absence of any way to keep track of what state I've left each folder of photos in is a source of constant annoyance and inefficiency in my workflow, as I often have up to 10 sets of unprocessed photos on the go, and I have to rely on manual methods (e.g. post it notes or renaming folders) to remind myself where I am with each one.
    Addressing this in LR4 would have a huge positive impact on my productivity and organisation - please consider doing so, it's disappointing and surprising that it's not already present in the LR4 beta.

  • I do not get the signal that is advertised or stated by your coverage maps, or sales people.  I am getting sick and tired of the Verizon run-around.  My next step is to submit a formal complaint to the FCC and my state Better Business Bureau.  I will also

    Verizon service is rapidly declining.  In addition, the provided service is not as advertised.  This is fraud by any standard.

    They have what is called heat maps which give a reasonable indication of QOS quality of service. I am also beset by reception problems. well I have bad news for you any type of wireless service is predicated of "best effort" meaning they try best to deliver service to as many paid subscribers in service area. They figure their statistics based of how many service workers great  ok and lastly outliers like me and you. You raise a case to state regulator or local that you feel your community has been targeted by bias in heat maps & why it should be fixed. It might work or might not. A better effort is to take your case to FCC. If you can prove there is favoritism in delivery of service to your community then they will deal with verizon but the FCC isn't going to pay much attention if your a crank and keep pestering them . My angle has been to keep plugging away at it explain business reasons of why they need to extend service but being respectful to Verizon. Keeping pressure on them maybe even helping them if local community is biased against adding cell tower or other Red tape . Give them benefit of doubt too they may be hampered by community or local state justification that just wont grant any service improvements.

  • When checking my Service and Support Coverage is states that my iPhone 5 is not activated.

    I activated my phone on the 21st, from the phone, right when I received it. It's been working fine. I also got an e-mail from Apple stating to reply to it to receive AppleCare +, which I did, and that seemed to go through. The odd thing is, that when I look into my Order History, it's still listed as shipped, and not delivered. Any input? Thanks.

    http://discussions.apple.com/message/21753467#21753467

Maybe you are looking for