No combination of CATS and PO corresponding to selection exists

Hi Folks,
I am getting this error message while getting in Tcode - CATM
Error Message - No combination of CATS and PO corresponding to selection exists.
Can any one tell me what is this error messaeg means.
Regards
Ravi

Hi,
What is the cost object in your time entry? For data transfer to MM-SRV you need to have a Sender PO in time sheet. If it is transfered to CO that means you might have used a Recr WBS / Order / CC.
Regards.
Sreekanth

Similar Messages

How to identify combination of created and deleted Bank Details

Hi Experts,
I will develop a report similar to standard report RFKABL00. The requirement is to display the date, time, vendor number, vendor name, changed by, field name, company, purchasing org, new value and old value everytime a user make a change on the bank details (Bank Key and Bank Account only in XK02).
The content of field name will be either Bank Key or Bank Account with its corresponding old and new value. Using transaction XK02, I tried to replace the Bank Account of the vendor and saved the data. The created and deleted values can be found in CDPOS using: objectclas: kred, tabname: lfbk and fname: key; but it is difficult to identify the correct combination of deleted and created values. I observed that for non-key fields in LFBK table there are entries for old and new values but for key fields like bank key and bank account they have nothing.
How will we identify the correct combination of deleted and created values if there are many entries in CDPOS?

Murali,
As already specified in your previous thread. You can get the id using source code. or extend the CO and print the value of s2.
Regards,
Gyan
www.gyanoracleapps.blogspot.com
www.querenttech.com

From which table check 'cost element' and its corresponding GL account?

Hi,
May i know from which could i check the cost element field and its corresponding GL account field??
Questions:
"the getting cost element should check the corresponding GL account, but I canu2019t find the
corresponding table which include these two fields. So, if you know the table in which cost element can check the corresponding GL account, please tell me ."
Is below way correct:
From table CSKA, i could get the chart of accounts related with the cost elements.
Then from table SKA1, i could get the GL account according to chart of accounts field.
Then i got an relation between Cost element with GL account??
Thanks!!

Hi
Could not locate the table, but could find that, if you come to transaction KA02, click on Environment - Display General Ledger account - In Chart of Account/ In Company Code option, then you can display the GL account for individual cost elements.
regards
Parag Bhargava

I have iTunes on 2 PC's. Somehow I wound up with 2 Apple ID's. I would like to combine the music and apps under one ID so that I can synch with my iPhone 4 and iPad. Can this be done?

I had a WIndows XP desktop and Laptop. Each had iTunes installed. When moving from iPhone 3 to 4, I acquied a second Apple ID. I want to migrate all of my playlists, downladed songs, podcasts and apps to my new sesktop (HP 64-bit, WIndows 7) and make that my headquarters for iPhone and iPad 1. Is it even possible to combine my media and get it together on my hand-elds? If yes, please enlighten. Thanks in advance.

I think I will do this. I will use my apple ID and set face time and message to work independently. That solves one problrem. My other problem and maybe my bigger problem is that if I am using my apple ID, how do I iflter all of this so that my kids don't see my contacts, get my apps, etc. ?

PO Line Item wise gross value for combination of WBS and Material Group

Hello,
Our requirement is to get report for PO Line Item wise gross value for combination of WBS and Material Group. Standard report ME2J gives net price but not gross value for Material Line items. Please let me know if any standard report( or ME2J) will suffice this requirement.
Regards,
Milind Dumbre

Dear Milind
No standard report available to get the PO Line Item wise gross value for combination of WBS and Material Group. Please go for development by taking reference ME2J.
Warm regards
Ramakrishna

Combining smart quotes and inch marks?

Dilemma! I have smart quotes turned on because I need them. I also need to be able to use inch marks in the same document. I have searched the Help files with no luck. Can anyone tell me if there's a way to have both smart quotes and inch marks in the same Pages document?
Thanks in advance!
Powermac G5 & Powerbook 15" Mac OS X (10.4.8)
Powermac G5 & Powerbook 15" Mac OS X (10.4.8)

You can indeed combine smart quotes and the character that indicates inches, by using the appropriate inch mark character from the system-wide Character Palette. To do this, you will need access the Input Menu at the top right of the menu bar. If you don't have the Input Menu visible, go into the International System Preferences, in the Input Menu tab, check the "Show Input Menu in Menu Bar" option at the bottom of the panel, and check "On" for the Character Palette. This will put a little flag on the right side of your menu bar -- this is the Input Menu.
From the Input Menu, select the Character Palette. With the palette open, choose the Punctuation category. You will be presented with a wide array of punctuation characters, including proper inch and foot marks (which are actually "prime" and "double prime" marks, and are angled, unlike straight quotes). Select in Pages where you want the character to go, and then double-click it, and it will be inserted. The prime and double-prime marks are not considered quotes by the system, and so won't be curlified.

For the 1st time I am trying to send an iPhoto by email but get an error message "combinations of username and password not recognised" I use the same details to log on to my Sky Mail (yahoo mail ) account . Any ideas?

For the 1st time I am trying to send an iphoto by e-mail but get the error message " combination of username and password not recognised by the server" I use Sky Mail ( yahoo mail) and input the same username and password that I access Sky Mail - have retried many times. Predictably the Sky help desk have no idea. Can anyone help please?

I regret that you're having trouble setting up your email, corbad! You're on the right track with your incoming email address. You might also try incoming.verizon.net or incoming.yahoo.verizon.net as possible alternatives, and 995 as the port number. Please let me know how that goes!
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Husband and Wife trying to combine music libraries and share between all Apple technologies in the house.

My husband and I both have apple ids which we use to purchase music, movies etc... We want to combine our libraries and pull from the same. We've been doing this manually - but wonder if we can use the Cloud to support 2 apple ids or if we have to create a 3rd apple id / email and somehow transfer our individual music to the 3rd apple id / email. Creating the 3rd email / apple id will be a pain since we will never use this as an email. We need Help figuring out the best approach.

You can't combine two Apple IDs... I have the same problem I have an iCloud mail account and an Apple ID i use to purchase music with and I'd love a way to combine them. Apple has said in the past their looking into a possible way of doing this but I'm doubtful they will... :/
However, sounds like iTunes Match will probably be the right solution for you http://www.apple.com/itunes/itunes-match/

I also have a .csv file with the name of a jpeg in one column and a text description of each jpeg in a second column. Is there a way to automatically insert one jpeg (photo) and its corresponding text, each pair on one page, into a Indesign document?

I also have a .csv file with the name of a jpeg in one column and a text description of each jpeg in a second column. Is there a way to automatically insert one jpeg (photo) and its corresponding text, each pair on one page, into a Indesign document?

I would also recommend to write the description into the meta data. This would allow to place a text frame above the image and it is possible to add meta information and file name automatically together with the image, when you place it or even in a prepared template.
Meta data information can be written easily in Bridge in the Meta File Workspace.

Wrong combination of Plant and Co code at the time of PO creation

Dear all,
At the time of creating PO when I am entering Plant and Company code system is not giving any error message if I am entering other Co code , i.e. Co code which is not assigned to the plant. I want an error message in case of maintaining wrong combination of plant and Co code.
Any suggestion ??
Reward assured for helpful answer.
Thx and regds
Amitava

Go to SPRO - MM - Purchasing - Environment Data - Define Attributes of System Messages - System Messages
Then maintain system messages 00 06 167 and then set as E (error) in category field.
Reward if useful

Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black. Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in, any ideas?

Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black. Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in so I cannot restore or anything. Looks like the screen is on it's just unresponsive and black obviously. Has anyone had this problem? I was updating via wifi right in front of my router and my computer.

Spoke to a "senior advisor" in the Apple TV department. Her suggestions: change channel in router to minimize/eliminate wifi interference from other users; move router away from any metal - i.e., DVD player, phone modem, etc.; keep router away from wireless 2.4 gH phones, which are "notorious" for crashing wifi routers. So she confirms that the problem is one of connection to router suddenly dropping out.
My own feeling is that none of these fixes will do the trick, because it seems pretty clear that there is a hardware component here - the timing of the drops seems like an overheating issue. It takes 35-40 minutes for the box to warm up enough for the first drop; then each consecutive drop happens quicker than the one before, as it heats up more. Each time it drops, its tiny brain gets a little more scrambled; last night it finally wouldn't start up again at all.
My suggestion is that everyone who is experiencing this problem, please call Apple tech support and ask to speak to a senior advisor in the Apple TV department. Make them aware of this problem!

I am using CC adobe Acrobat to combine multiple pdfs and add page numbers. Mac users can no longer read the page numbers but pc users can.

I am using CC adobe Acrobat to combine multiple pdfs and add page numbers. As of about 2 weeks ago the mac users can no longer read the page numbers they get a font error message and see only -- where the page information should be. The pc users do not have this same problem. When I replace our regular font (URW Grotesk) with a system font (Verdana) everyone is able to read the page numbers. This is a new issues, I have been creating these documents in the same way for years without a problem. I have been on hold and on and off calls for the last two hours, I keep getting hung up on once I find someone in adobe support to talk to!

Hi KnoopL,
Are the Mac users using Preview to view the pdfs or Adobe Reader?
Regards,
Rave

I see that many people have already complained about Itunes' backup encryption. I NEVER set a password for it (and the corresponding option is still unticked, as always) yet it asked me for a pwd when I upgraded my 3GS to the 5.0 OS. How to solve this?

I see that many people have already complained about Itunes' backup encryption. I NEVER set a password for it (and the corresponding option is still unticked, as always) yet it asked me for a pwd when I upgraded my 3GS to the 5.0 OS. How to solve this?

To prevent others from reading your mail, don't give them access to your account. If others need to use your computer for some reason, set up personal accounts, or a guest account, and switch to it before allowing them access. This is the simplest, and most effective, method.
Email message files can be read as plain text in TextEdit or any word processor.
To protect your email messages from being viewed by others while in your account, you would have to lock the folder, putting it into an encrypted disk image that required a password to be opened and mounted. You would have to double-click on the image and give your password to mount it before launching Mail then unmount it as soon as you're done. My guess is that you could replace the ~/Library/Mail folder with an alias pointing to the folder on the disk image.
It may work, but it seems like a lot of unnecessary hassle.

Combined PDF's and created links to original PDF's

Combined multiple PDF's from several individuals into on E-book. I also create a table of contents with links to original PDF's within the combined document. Problem is that each link opens in a different magnification. Page 1 is 100%, 1st link 93%, 5 link 56%, etc. Is it possible to have all pages open with the same magnification? (i.e. all open @ 100%).
Thanks in advance.

If the combined PDFs are within a single PDF file —
Use the Link Action "Go to a page view".
As the Create Go to View dialog states:
"Use the scrollbars, mouse, and zoom tools to select the target view..."
During this activity you can establish the desired zoom (page magnification of 100%).
Once the activity is complete, click the Set Link button.
Be well...

Get question id's and its corresponding answer id for given Doc id's

Hi,
I am trying to write a program which gets the Equality values (Questionaire - Erecruiting) like :
1) Gender
2) Care Resp
3) Care Type
4) Ethnic Origin
5) Religion
6) Disability
7) Sexual Orientation
8) Age Range
And move it to an internal table which has each Equality as a field.
I referred to the following tables in order to get the question id's and its corresponding answer id's for questionaire.
1) hrp5141
2) hrp5125
3)T77RCF_INFDAT
And i tried to fetch the equality data using the class CL_HRRCF_QA_BL. This class returns the values from hrp5141. It also returns the object id, answer id and answer text. CL_HRRCF_QA_BL class also intern calls the function module HRHAP_DOCUMENT_GET_DETAIL, which gets the set of questions and its answers. But this question id's and answer's differ for document id's (QA_DOC_GUID).
Here the problem is the object id for Doc id's (QA_DOC_GUID) are differing.
Example 1: I have taken first QA_DOC_GUID - BF2C554821CFBFF180C5DKDINGKGNSKE as input to check its question and answer using CL_HRRCF_QA_BL class.
The question id is here I am assuming is 20366558 and the corresponding answer id is 20368559 for Gender.
Example 2: I randomly picked one more QA_DOC_GUID - BAS06AE4533374F1B3CF0018F346808A. The question id here is 50368915 and answer id is 50368918 for gender which is different from the first example.
I am not able to decide on other fields as the answers for it could be generic viz., YES, NOT, Prefer not to answer etc. Whereas Gender holds the value of either Male, Female or Prefer not to answer, Religion holds Religion name or Prefer not to answer value and similarly Age holds the age range or Prefer not to answer value.
Can anybody suggest on how to get the equalities values (the question id's and its corresponding answer id's).
Appreciate quick response.
Thanks in Advance.
Thanks and Regards,
Rashmi

Hello RichR,
To setup an iCloud account, you don't need an existing email address. Take a look at this article which contains more information about iCloud email:
iCloud: Mail overview
When you set up iCloud with a new Apple ID that doesn’t use an existing email address, your new Apple ID ends with @icloud.com and is the email address for your free iCloud Mail account. If your Apple ID doesn’t end with @icloud.com, @me.com, or @mac.com, you must set up an @icloud.com email address before you can use iCloud Mail.
If you already use iCloud Mail with an @mac.com or @me.com email address, you also have an @icloud.com email address. You have an @icloud.com equivalent for every active @me.com or @mac.com email address or alias that you have as part of your account.
After you set up your iCloud Mail account, you can sign in to icloud.com/#mail and start using iCloud Mail on the web right away. To use iCloud Mail on your devices, you must set it up on each device. For more information, see Set up iCloud Mail on your devices.
Thank you for contributing to Apple Support Communities.
Take Care,
BobbyD

No combination of CATS and PO corresponding to selection exists

Similar Messages

Maybe you are looking for