No Commercial Invoice pop-up in MIGO for depot

Hi,
I am doing a MIGO for Imports in depot,but there is no commercial invoice pop-up appearing.
I did the following:
Checked the tax procedure ,created the required condition types for Ecess and SHEcess which were missing.
Created condition records with zero tax code for the condition types
Maintained in the relevant condition types in tax defaults
Again made a new PO.Put values of all the import duties.
Here my client has CVD and Add Customs inaddition to BCDs.So only two conditions will come other exicse.This is according to the new amendment.
After doing all this still I am not getting a commercial invoice pop-up in MIGO.
System :ECC 6.0 patch:20
I have a doubt with tax excise defaults.
Becuase even if I try to make an excise invoice through J1IG , it says no entries found in table J_1IEXCDEF.
Please let me know the correct entries for this table and also if any dependency is there.
CVD Condition type:JCV1
Add Duty:JADC
BED:JMX1
ECS:JEC2
SHECESS:JHX1

Hi
This popup comes only for import PO. The vendor in these import PO have the import pricing procedure(std or z copy of std)
It seems you are using std import pricing procedure or a copy of that for your domestic vendor.
You should use only std domestic pricing procedure or a copy of that for your domestic vendors
And if this is not the case then there is a bug in your system. Raise OSS to SAP

Similar Messages

Remove commercial invoice Pop Up in migo

Hi expert
I dont want Commercial invoice pop for for local po...............how should i acheive it
Regard
Nabil

Hi
This popup comes only for import PO. The vendor in these import PO have the import pricing procedure(std or z copy of std)
It seems you are using std import pricing procedure or a copy of that for your domestic vendor.
You should use only std domestic pricing procedure or a copy of that for your domestic vendors
And if this is not the case then there is a bug in your system. Raise OSS to SAP

Commercial Invoice number mandatory in MIGO

Dear All,
Is there a way to make the commercial Invoice number to be a mandatory entry field for Import MIGO.
Is there any field settings or any EXITS available?
Please advice.
Regards

HI
Make Referance field mandetory in the path
SPRO > MM > IM and PM > Setting for Enjoy transaction > Setting for Goods Movement (MIGO) > Field selection per MVT Type > Select MVT 101

Capture of excise invoice in MIGO for depot

Hi,
We have one depot plant as per regular process we do the GR with MB01 and then J1IG for capturing of excise duty which update the RG23D entry, now i want to know what is the difference if we do this in MIGO so that both this can be done in same transaction I try in development server by first selecting the check box for capture excise invocie in MIGO for the depot plant then made one entry in MIGO but found that the field SHIPFROM in table J_1IRG23D is coming blank when done with MIGO so is there any differecne in thos two J1IG and MIGO create RG23D entry aslo the vendor from which we are purchasing the material is also a trader who is passing the excise duties which they paid and the same amount we have to split in MIGO but I have not found the MRP indicator in excise ->misc. tab in MIGO.
regads,
zafar

Hi,
Can you help on this, I am not getting the MRP indicator in MIGO for the material, what settings are required for this the J1ID the vendor is selected as first stage dealer.
regards,
zafar

Error messge in migo for import procurement

Hi
Gurus
I have two issues related to import procurement
We pass Customs duty first i.e MIRO for a given quantity. then we do GR ( MIGO) with ref to the commercial invoice pop up at migo.
Here i want a check ( a error message) once the quantity of that Invoice no is completed.Please let me know how to do message setting for the same.
Secondly when iam entering the customs value in INR in MIRO, the same amount must flow in MIGO, but instead the value is flowing with exchange rate .What are the settings so that the same or proportianate value entered in MIRO for customs will flow in MIGO.
thanks in advance
Chris

>
cnranjith wrote:
> Dear all
>
> When doing MIGO for Import PO excise tab is not appearing for the material
>
> I have maintained all the data in J1ID for the material and plant
>
> already we use to capture EI for the same material and plant but this time this is creating issues
>
> We have posted an inoice of planned delivery costs but no excise tab in MIGO
>
> What might be the reason
First you have to post the Customs MIRO in case of import purchase...then go for MIGO...you will find excise tab will follow....
Regards,
Indranil

Excise capture during MIGO for domestic purchase

Dear Gurus,
I thank the forum members for posting lot of suggestions on the captioned subject. After referring to all of them and making
the necessary customization in ECC6 for TAXINN, I have come across some problems and request you to give your
valuable suggestions. While doing MIGO, I get a popup for Commercial Invoice No. and date and after filling them alongwith delivery challan no. etc, the excise invoice tab is not opening in the MIGO screen. However, the GR document is posted
without errors. When I try to create Excise Invoice through J1IEX, the system pops up for commercial invoice number.
For capturing excise against purchase order, the system gives the message that the commercial invoice has not been
created when I give the commercial invoice number given in MIGO. Whereas, when I give material document number for GR reference, the screen for excise opens without any excise duty values. When I try to input the values manually and press enter, the values goes off and I could not proceed.
Thanks in advance for valuable suggestions ASAP.
Sadashivan

Thanks to BUDV/Naveen/Subham for the prompt reply. I made the changes to capture and post EI in MIGO in excise group settings and removed the CVD conditions in calculation schema and now the commercial invoice pop is not coming. But during MIGO in this process, the client wants to capture the BED, AED, SED automatically. When the Excise Invoice tab opens in MIGO, it is blank although the Base amount is shown from the assessable value given in J1ID. They does not want to enter the BED,AED, SED field manually in the warehouse doing the GRN transaction. The rate has been given for condition types in FV11 which comes as taxes in Invoice tab. But the same rate is not linked in Excise invoice tab in MIGO. Can you please enlighten me where to make the relative settings for automatic calculation of BED, AED, SED, Cess based on assessable value during MIGO?
Thanks in advance.
Best Regards,
Sadashivan

Diff between Commercial Invoice and Excise Invoice

Hi all,
What are the differences between commercial invoice and excise invoice?
Which one is more related to SD?
Regards,
Ajit

Hi,
Commercial Invoice contains information more specific to customer (Pricing, Tax, Payment terms), which becomes a part of recievables.
For Commercial Invoice, there is no need for advance declaration of the Number Ranges for the Document.
Excise Invoice contains information related to excise duties which has to be payed to the Excise authorities and also other statutory requirements .
For Excise Invoices, every manufacturing company has to declare the Number ranges (Per Excise Group/Series Group) to the excise authorities beginining of the year.
Nowadays most of the buinesses are directing toward common (Commercial *** Excise Invoice) printout , though in SAP its still a separate transaction for posting.
I hope this clears your doubt.
Reward points if thie helps.
Regards,
Harsh

Commercial invoice number Pop up in MIGO ( if the PO Imports )

Hello
In the imports scenario, in order to capture an excise invoice along with the GR through MIGO transaction, the commercial invoice number has to be entered in the pop-up prompted in MIGO. The excise duties flow from the values captured in the commercial invoice.
In MIGO, if GR is being carried out with respect to an imports PO number, there is a pop-up which is prompted to enter the commercial invoice number. At present there is no validation for the value being entered in this pop-up. Note 1303077 This note introduces a validation to check whether the document number being entered by the user is actually an invoice document or not. If not, a warning message is displayed. We are in EHP4 Patch level this note not suitable for us any othere away for this requirement .Please help me
Thanlks

Check notes 1319544,1472109.

Import MIGO- Commercial invoice number pop up screen

Dear All,
I want to make the pop-up screen mandatory (which asks Commercial Invoice) which arises making Import MIGO.
Any standard setting is there or to be done with abapers?
Please advice
Regards

Hi
If you have entered JCV1 (CVD)condition in your PO ,During MIGO pop up for entering Commercial Invoive will appear.Ensure that you have maintained the JCV1 condition in the Excise defaults setting
Regards
Sandeep

Commercial Invoice in not Popping up during MIGO

Against One Purchase Order I have performed Planned Delivery cost of imported material with T. Code MIRO for 1000 No Qty. Now first i have done Goods Receipt of only 500 no and while doing this commercial invoice window popped up (which was generated with Planned Delivery MIRO)
    Now Once again i am trying to perform goods receipt for the Balance Quantity of 500 No., commercial Invoice window should pop up. But its not happening.
    Can some body help . Its urgent

The terms of payment defaulted when posting an invoice depends on where
the invoice is created.
1-If the invoice is created in Financials, the terms of payment from the
    company code segment are defaulted
2-If a vendor invoice is created in Purchasing Management, terms of payment
   from the purchasing organization segment are defaulted. When you post this
invoice, the terms of payment are copied to the FI invoice (which is created
   automatically

Commercial Invoice no at Migo

Hi All,
We are doing Migo for Imports PO , first we have done 103 and here the commercial invoice popup comes with no invoice number and we are just entering and saving the 103 document. Then we are clearing the invoice for customs vendor in MIRO , now we are releasing the GR blocked stock 105 , system pops up the box which has the commercial invoice number ( Invoice doc number generated in MIRO) by default ,when we proceed further system issues a warning message " Document entered is not an Invoice " message number 8I683 , but still migo can be done and we are not sure if this message has any impact in accounting entries which creates for material document. Pls let me know any solution for this issue.
Thanks in advance
Benny

First,SAP not suggesting to capture excise for 103 & 105 movements.
Refer note 952287 for above subject.
Document entered is not an Invoice " message number 8I683
This is a validation message to check entered document number is invoice number or not,yes it will
accounting impact system if duty will be posted wrongly for other material purchases.
Check notes 1472109,1303077 for validation of commercial invoice.
Edited by: Jeyakanthan A on Mar 29, 2011 5:22 PM

Reference Invoice Pop Up not appearing During Import MIGO

Dear Experts ,
I have got two company codes , single tax procedure ( TAXINN)
One of the company code(plant that is ) is excise registered & the other is not .
In case of the excisable firm , certain duties are utilised in excise credit .
For both the procedure followed is :
Make PO
Book MIRO for Customs
Make GR wrt Customs MIRO Number
Book final commercial Invoice to the Vendor
BUT
In case of the company(plant) that is not registered with excise, the POP UP
for refernce MIRO document is not appearing at the time og MIGO.While in case of the other company
(with excise registeration ) it works fine & pops up.
Pls tell me what could be wrong??
Regards ,
Anis

Dear Anees,
when there is no excise involved in the 2nd company code, obviously config settings for excise related would not have been done.Then where is the question of availing credit ?
How can import work without anty excise related config at the background?
Hope has helped you.
thanks
nandu

Commercial Invoice Number in MIGO (GRN) Document - Link

Hi All,
I wish to understand - what/where/how is SAP establishing the link between the Custom/Commercial Invoice posted via MIRO to Goods Receipts (MIGO).
I am also interested to know whether this link is at all updated in SAP somewhere?? This should help me determine the errorneous linkages and save subsequent reversals as well.
Thanks in anticipation,
Gaurav.

Hi Gaurav,
From my experience with SAP ECC 6.0, I have not consistently found a direct link between the MIGO documents and the MIRO documents. The only thread is the PO number and the PO line item number. If when you create the Purchase Orders and you have GR-Bsd IV (EKPO- WEBRE) checked, then the system won't allow you to post a MIRO UNLESS a MIGO has been done. The theory behind that is that the invoice should be for that particular receipt (or delivery note). However, once a MIGO is posted, you can post multiple MIROs for that PO then.
I've used the table EKBE to analyze what is stored for documents posted to a particular PO. You might try looking at the table to see if you can see a link between a particular PO's invoice and gr. If you look at the PO History Cat. (BEWTP), Q's are invoices and E's are goods receipts. You might try checking the Reference Doc field (LFBNR), it appears if you have checked the GR-Bsd IV on the PO, then this field is populated for the invoice with the gr's MM doc number. However if the GR-Bsd IV flag was not checked, then the field may be blank.
You might want to try posting your question in the ERP Logistics Materials Management group. That audience may be able to provide you with more information.
Hope that info helps you some,
Cindy

Commercial invoice number in MIGO

Hello Gurus,
can you tell me where i can get the number of commercial invoice which is entered for MIGO. The problem is I have entered wrong invoice number and posted the GR document. While cancelling this GR document, I am getting wrong accounting entries because of thewrong commercial invoice number that I have entered. Can you suggest me the table wherein I can find this link?
Thanks in advance,
Sudhir

Hi You can use TCode SQ01
In the Menu select Envirenment-> Query Areas.
Select Standard Area(Client Specific).
Then Select other User Group and Select your requirement. Execute.
Then give your Material, GR no and Plant and other crietria and execute. You will get all the required details.

Migo for subcontracting po- Excise invoice is posted later to material docu

Dear all,
While we are doing migo for sub-contracting PO we are getting an error like this Excise invoice is posted later to material document.
process
1. Create subcontracting PO.
2. Issue material 541 MVT.
3. Create sub-contracting challan- dated 8-8-2010.
4. Migo date 8-8-2010.
while entering subcontracting challan no & year, error messege is coming as Excise invoice is posted later to material document.
Pls give solution.
Thnaks & regards
madhu

Hi,
You will have to post the MIGO at least one day after the creation of Excise Challan.
Regards,
Prashant Kolhatkar

No Commercial Invoice pop-up in MIGO for depot

Similar Messages

Maybe you are looking for