No "complete" sound,HP P6610F Win 7 64 bit

Back in December i purchased a new p6610f desktop and had troubles with the sound out of the box.
I called the retailer i purchased it from and they wouldn't do a refund on the machine and suggested checking the MS updates for updated Realtek sound card drivers. I installed these and everything was fine for about a month until an update install killed it again.
I ran the troubleshooters from both HP & MS and nothing worked. I did a destructive recovery and reinstalled all of the important updates first,sp1 next,the optional updates and the the realtek drivers from win updat last. I then tried a movie and I get sounds,music but no voices. I then tried a youtube video and same result. I then went to the Realtek site and got the hewest drivers from there and installed them and still nothing works.
I'm getting very frustrated with this problem and am @ my wits end to find a solution......
This question was solved.
View Solution.

Dbeast, welcome to the forum.
Here is a guide that may help you solve your problem. Please let us know if it helps or not.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

E430 Fix bad sound quality with Win 7 + Dolby Advanced Audio

Problem: In Windows 7 x64, sound quality is tinny and sounds very badly DSPed when Dolby Advanced Audio is activated. Even setting all effects off and EQ off the sound is bad simply because Dolby is/was turned on. Going to Sound > Playback > Speakers > Properties > Enhancements, checking Disable All Enhancements and clicking Apply clears up the sound, but then the EQ won't have any effect.
Solution: If you have Win 7 x64, uninstall the Win 7 driver (h0a114ww.exe) and instead install the Windows 8 driver (h0ac10ww.exe). Note that this is NOT the Win 8.1 driver - that won't install under Win 7. The sound quality will be way better when you use Dobly EQ and effects. So far I haven't had any stability problems.
I thought my E430 had the worst sound card ever until I upgraded to Windows 8 and installed the new driver. I have Windows 7 dual booted and found the sound quality in Win 7 terrible so I played around with it and found the above solution.
Solved!
Go to Solution.

Hi FunkyB,
Welcome to Lenovo Community!
I want to thank you for the assistance provided on the issue. Please feel free to post in Lenovo Community Forums if you have any further queries!
Please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Cheers!
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Fixed sound issues under wine, but would like to know how

I managed to get sound working under wine. I have no idea how, but I did. Ill explain and see if anyone can make sense of it.
So I initially set up kmix to where my primary device was my soundblaster card. I would continuously get errors like "creative blah did not work, switching to 'HD audio generic'.
I would not get system notification sounds but things like youtube and movies would. I had no luck with wine. I then started experimenting with the preferred devices and set the generic one to primary. The sound would work, but my problem was reversed. I would get notification sounds but no youtube or media audio. I then tried moving "default" up to preferred, only to get the same result. Neither gave me any sound in games under wine --not to mention the horrible system hangups when using "HD audio generic" and "default"
So I decided I prefer media audio over notification audio and went back to my original configuration. The result was that I still got system notifications but no media audio. At this point, I became very confused and started experimenting with changing the sound profiles. Any sort of chage at all would create a "dummy device" as playback out of my creative card. About 15 reboots later and luck? maybe, I got it to at least give me notification audio. I was stumped. I also noticed that the hangups were returning.
After exhausting all the options, I was like "oh well better move the HD audio Generic back up" and see what happens. Reboot. Somehow, I got media audio AND wine sound worked as well as the system hangups stopping.
I have no idea. Anyone have a clue?
Im glad its working, but im not going actually going to learn anything unless i figure out what happened.
Thanks in advance.

Update: Ive found at least a modicum of consistency here. If I try to change anything in the preferences at all once I get wine audio working, it will stop working.
Thus far, here are my options..I can have
System Notification audio working and nothing else
System notification audio and media audio working, but no wine
Media Audio and Wine Audio working, but no system notification audio
But not all three
If I change one preference, wine audio on its own will stop working, or wine audio AND media audio will quit working.
If I change it back to the settings which allow wine audio and media audio to work, it usually will not. It will however work, consistently after enough reboots...2-10.
Any ideas?

I've lost the voice track when I listen to music with headphones.What happened? Can I get the complete sound back?

I've lost the voice track when I listen to music with headphones.What happened? Can I get the complete sound back?

Try compressed air. Try tweezers and a magnifying glass with good light.
The next step would be to Google an iPhone repair service in your area or use this as a good reason to upgrade.
Hint: there's a Reply button at the bottom right of each post so you can reply to the appropriate poster and not yourself.

No sound on web videos like YouTube, Yahoo, etc but sound on them using Chrome. Sound works in Win Vista Home 32 bit and in media players. Just no audio using Firefox 4.0 Unninsdtalled and re installed Adobe Flash 10.2.513.1

No sound on web videos but sound if I download them and then play them using any media player ( I use VLC 1.1.2) MP3s play fine.
Audio fine on same videos using Chrome. Sound fine on Win Vista Home 32 bit No audio using Firefox 4. Adobe Flash 10.2.153.1
Have un installed and reinstalled it rebooting each time. Same Videos play fine in Chrome so problem must be in Firefox/flash combination.
http://www.codecguide.com/fix_for_flash_sound_problems.htm
http://forums.techguy.org/multimedia/490867-fixed-adobe-flash-no-sound.html

No sound on web videos but sound if I download them and then play them using any media player ( I use VLC 1.1.2) MP3s play fine.
Audio fine on same videos using Chrome. Sound fine on Win Vista Home 32 bit No audio using Firefox 4. Adobe Flash 10.2.153.1
Have un installed and reinstalled it rebooting each time. Same Videos play fine in Chrome so problem must be in Firefox/flash combination.
http://www.codecguide.com/fix_for_flash_sound_problems.htm
http://forums.techguy.org/multimedia/490867-fixed-adobe-flash-no-sound.html

Why Win 7 64-bit pc says device added will sync momentarily, but no data has come from either my Win XPpro 32-bit pc nor either Android device (3 synced)?

All 3 existing/currently-used devices (Win XP pro 32-bit laptop, and 2 Android phones) are on Firefox 30 (latest version) and sync just fine; NEW laptop (a Win 7 64-bit laptop, HP pro650) says added, "Will Sync Momentarily" but no data transferred... Not a single bookmark, nor my theme or other configuration(s).
I realize, after finding hardware requirement, that 64-bit Win 7 allows Firefox to work fine and am using it right now (I downloaded v.30 Firefox as soon as I booted the brand new pc up today), it let me set up sync & everything, just never transferred any data...Almost impossibly time-consuming task to transfer the thousands of bookmarks & complete organization from my other laptop, and will not matter much if I cannot sync any new ones with it. I would hate to have to transfer everything into Chrome...
Am I out of luck with this 64-bit unit to sync at all until Firefox supports it in the future?
Same night...Later that evening:
Well...Update Here: Tried Waterfox and it worked perfectly, got everything in from XP pro pc. SuperFast browsing too.
Granted it is apparently a v.28, I think. Doesn't really matter to me. Now I'm going to try to import both Android bookmarks, etc. Will post my success or failure later.

Hi D.Dao,
In order to further investigate the issue on Firefox 30, could you please turn on logging:
# Open about:config and turn on: services.sync.log.appender.file.logOnSuccess and services.sync.log.logger.engine.bookmarks
# Restart Firefox and look at: about:sync-log
# Logs and error messages will be located here
Links for log text support see [http://pastebin.mozilla.org/] See how to turn on logs or [https://quality.mozilla.org/helpful-tips-for-qa-of-sync/ Helpful Tips for QA of Sync]
Thank you!

Audigy 4 Pro microphone problems in Win 7 64-bit

Hi there,
Since I put my Audigy 4 Pro card into my newer PC with Win 7 64-bit the microphone only seems to work when it wants to, or works but sounds messed up.
I've waited a while before posting about this because I thought the newer drivers would sort out the problem, but it remains the same.
The card/microphone works without a problem if I put it in a PC with Win XP.
Sometimes the microphone will not pick up any sound at all. Other times it will work, but only for? game, say Heroes of Newerth. Then in Windows using teamspeak, people describe the sound like I'm talking through a fan. Tried using the in-game VOIP but I get the same result.
After a restart or just some random day, people in Heroes of Newerth would discribe the VOIP from my side as if I was talking under water(or through a fan), but then it would work fine for teamspeak or Bad Company 2 or any other game. I used these 2 games as an example since its what I'm playing mostly at the moment.
There doesnt seem to be any consistancy with the problem.
I have recently removed the sound card from my PC and now forced to use the onboard sound that reminds me of the sound of a clockradio.
My PC specs are:
Asus Rampage Formula Motherboard
Intel Core 2 Duo 3.0GHz E8400
8GB RAM
4 x WD Raptor HDD Stripe RAID
ATi Radeon 4870 52MB
Sound Blaster Audigy 4 Pro?(model number shown?is SB0290)
Using?a Sennheiser PC350 Headset.
What I have tried my side so far:
Tried latest and older drivers for Win 7 64-bit
Reinstalled Windows 7 several times with different drivers.
Tried disabling all devices except for line/mic
Tried other input devices.
Tried with different audio and sound codecs, tried without any.
Might have been or 2 other things I tried I cannot think of now.
Is there anyone that experienced similar problems and got it fixed? Any help would be appreciated.

Hi Bill,
Can you be more specific about which steps were not recorded?
There some things that will not be recorded. The release notes list some known issues.
Known Issues:
Tutorial Builder can only capture actions in Photoshop that are recorded by the ScriptListener plug-in. While this includes most of Photoshop's functionality, some features/tools are not recorded. In particular, brushing actions are not captured. We hope to address this in future releases of Tutorial Builder.
Some of the the actions that Tutorial Builder captures are not yet instrumented to produce detailed text instructions in the final tutorial. For such actions, the generated tutorial will include a step that says "The (action name) is not yet supported by Tutorial Builder," and the tutorial author will have to edit the HTML to provide more descriptive text. Note that the "Show me in Photoshop" link is still generated for such actions.
Some Photoshop actions allow the user to specify a set of parameters in multiple ways, but Tutorial Builder cannot detect how the user specified those settings during the recorded demonstration. Thus, the text in the generated tutorial may not describe exactly what was demonstrated. For example, in the Image > Adjustments > Levels tool dialog box, you can update the parameters using three different eye droppers. Since Tutorial Builder does not know which (if any) of these eye droppers were used, the text for a Levels adjustment does not describe exactly how the settings are specified. Again, the tutorial author can simply edit the HTML to provide a more accurate description.
Thanks!
Mira

11g R2(11.2.0.2)-Not able to connect using SID - Win 7 32 bit

Hi Experts,
I have installed 11gR2(11.2.0.2) on Win 7 32 bit OS.
I am able to start database and listener services without any problem. ORACLE_BASE and ORACLE_HOME variables are set.
I am even able to connect to database using "sqlplus user/pass". (With ORACLE_SID variable set)
However, sqlplus command hangs when I try to connect using SID "sqlplus user/pass@o11gr2".
(No error, after waiting for >20 minutes I have to kill the command.)
=================
Following in "C:\Oracle\product\11.2.0.2\dbhome_3\RDBMS\trace\o11gr2_ora_6352.trc"
- "2012-04-05 09:50:55.846: [ default]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\ocr cannot be opened. error 2"
Following in "C:\Oracle\product\11.2.0.2\dbhome_3\log\machinename\client"
- 2012-04-26 14:35:18.781: [ default][1216]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\olr cannot be opened. error 2
[ CLSE][1216]clse_get_crs_home: Error retrieving OLR configuration [0] [Error opening olr registry key. The system cannot find the file specified.
"tnsping" returns OK for "tnsping o11gr2", "tnsping localhost", "tnsping 127.0.0.1", "tnsping 192.168.0.1"
Output of LSNRCTL:
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
Start Date 26-APR-2012 14:35:17
Uptime 0 days 0 hr. 4 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\listener.ora
Listener Log File C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
Services Summary...
Service "O11GR2" has 2 instance(s).
Instance "O11GR2", status UNKNOWN, has 1 handler(s) for this service...
Instance "O11GR2", status READY, has 1 handler(s) for this service...
The command completed successfully
=================
This was working earlier. One day it stopped working all of a suddent and I am not able to connect using SID till now.
I tried re-installing in different home multiple times. But no luck even after disabling firewall completely.
Any suggest/help is greatly appreciated on this.

------------------------------tnsping-------------------------
C:\>tnsping o11gr2
TNS Ping Utility for 32-bit Windows: Version 11.2.0.2.0 - Production on 26-APR-2012 14:54:32
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = J1009615W7LT.jda.corp.local)(PORT = 1521
))) (CONNECT_DATA = (SERVICE_NAME = O11GR2)))
OK (30 msec)
C:\>
-----------------------------ping-------------------------------
C:\>ping J1009615W7LT.jda.corp.local
Pinging J1009615W7LT.jda.corp.local [fe80::20c9:b748:311a:95e4%14] with 32 bytes of data:
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Ping statistics for fe80::20c9:b748:311a:95e4%14:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\>ping 10.60.200.221
Pinging 10.60.200.221 with 32 bytes of data:
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Ping statistics for 10.60.200.221:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\>
-----------------------------C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml---------------------------------
</msg>
<msg time='2012-04-26T14:35:18.855-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
</txt>
</msg>
<msg time='2012-04-26T14:35:26.200-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:35:26 * ping * 0
</txt>
</msg>
<msg time='2012-04-26T14:35:43.204-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:35:43 * ping * 0
</txt>
</msg>
<msg time='2012-04-26T14:35:55.952-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Dynamic address is already listened on (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
</txt>
</msg>
<msg time='2012-04-26T14:35:55.953-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:35:55 * service_register * O11GR2 * 0
</txt>
</msg>
<msg time='2012-04-26T14:37:08.732-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:37:08 * ping * 0
</txt>
</msg>
<msg time='2012-04-26T14:38:34.943-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:38:34 * (CONNECT_DATA=(SERVICE_NAME=O11GR2)(CID=(PROGRAM=C:\oracle\product\11.2.0.2\dbhome_3\bin\sqlplus.exe)(HOST=J1009615W7LT)(USER=j1009615))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::20c9:b748:311a:95e4%14)(PORT=51907)) * establish * O11GR2 * 0
</txt>
</msg>
<msg time='2012-04-26T14:39:23.627-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>WARNING: Subscription for node down event still pending
</txt>
</msg>
<msg time='2012-04-26T14:39:23.628-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:39:23 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=j1009615))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186647040)) * status * 0
</txt>
</msg>
<msg time='2012-04-26T14:54:25.550-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>System parameter file is C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\listener.ora
</txt>
</msg>
<msg time='2012-04-26T14:54:25.551-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Log messages written to C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml
</txt>
</msg>
<msg time='2012-04-26T14:54:25.552-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Trace information written to C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\trace\ora_11640_3776.trc
</txt>
</msg>
<msg time='2012-04-26T14:54:25.553-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Trace level is currently 0
</txt>
</msg>
<msg time='2012-04-26T14:54:25.553-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>
</txt>
</msg>
<msg time='2012-04-26T14:54:25.555-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Started with pid=11640
</txt>
</msg>
<msg time='2012-04-26T14:54:25.560-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
</txt>
</msg>
<msg time='2012-04-26T14:54:26.695-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Listener completed notification to CRS on start
</txt>
</msg>
<msg time='2012-04-26T14:54:26.712-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
</txt>
</msg>
<msg time='2012-04-26T14:54:29.880-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Dynamic address is already listened on (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
</txt>
</msg>
<msg time='2012-04-26T14:54:29.881-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:54:29 * service_register * O11GR2 * 0
</txt>
</msg>
<msg time='2012-04-26T14:54:32.090-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:54:32 * ping * 0
</txt>
</msg>
Edited by: 850920 on Apr 26, 2012 11:59 AM

Hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit   I writ again my problem    i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5

On Thu, Jun 14, 2012 at 12:54 PM, mahdi ehsani <[email protected]> wrote:
On Sun, Jun 10, 2012 at 7:29 PM, Apple Support Communities Updates <[email protected]> wrote:
Apple Support Communities
Re: after install windows 7 32 bit there is no sound my mac is os x 10.7.2
created by The hatter in Boot Camp - View the full discussion
This solved my question
This helped me
you have RealTek on your workstation and just download the current driver which is easy to findwww.realtek.com
This solved my question
This helped me
Did this help? Go to the message, sign in, and reply or mark the response as correct or helpful
Start a new discussion in the same community/choose-container!input.jspa?contentType=1&containerType=14&container=2143&ac_ci d=op123456
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
© 2012 Apple Inc. 1 Infinite Loop, MS 303-3DM, Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Apple Support Communities Terms of Use | Apple Support
hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5   Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result
please help us by address site please please .....
<Edited by Host>

hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5 Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result

Cannot install CS3 on Win-7 64-Bit

I have a brand new Win-7 64-bit system.
I still have the install files for CS3 Web Premium that I downloaded 3 years ago.
I have had various problems.
Installed at first and programs hung or failed to open.
I tried going back to a restore point and installing again.
I read somewhere this may have been a bad idea - don't know why.
However, my latest methodology has been:
Copy the install files to the new machine.
Deactivate the software on the old machine.
Extract the AdobePDF.dll_64 from the data1.cab
Ran the install. - pointing to the AdobePDF.dll when prompted.
Acrobat 8 and shared components installed but did not work.
Everything else says "Component Install Failed" - no other explanation or help.
Get the vista licensing patch and install it. - when I did this I was able to get Acrobat 8 to run and not hang.
Updated Acrobat to 8.1.3.
Tried the install again.
I still get "Component Install Failed" for everything. No idea why.
I have read through lots of stuff on the forums. Found out about the AdobePDF.dll_64 and the licensing patch.
Haven't found anyone else who tried going to a restore point. If that is my problem what do I do. I have restored a couple of times and cannot get back to where I was on the first install. Since I am just getting started, I could return to factory install on the machine and try again - but I only want to do that if it will actually work!! I having been at this for two days and I would like to move on!!

OK. It turns out the restore was in fact what killed me. The restore removed some, but not all, of the Adobe install I had tried. This was enough to screw up all future install attempts.
The restore point thing in windows sounds nice, but I guess it can be dangerous.
I had messed things up with all my install attempts, so I restored the machine to factory settings - a clean win-7 install - and then followed the instructions found here: http://forums.adobe.com/message/2335063 and it worked.

HOW TO FIX HD AUDIO/UNKNOWN DEVICE/DEVICE WON'T START LENOVO H320 Win 7 64-bit

Fix for - HD Audio devices won't start or you can't load correct driver. Lenovo H320 - Win 7 64-bit I-3 processor. 5 series/3400 chipset
Here is a working procedure to fix the problem when you install windows 7 64-bit and can't get the correct drivers installed for the HD Audio devices 1)Realtek AC97 HD Audio device id = HDAUDIO\FUNC_01&VEN_10EC&DEV_0662&SUBSYS_17AA3604&REV_1001
and 2)Intel HD Audio device id = HDAUDIO\FUNC_01&VEN_8086&DEV_2804&SUBSYS_80860101&REV_1000 Regards >>> Sucromatic
For an IBM LENOVO 320 with Windows 7 64-bit Home Premium Version download these drivers to a directory in a second partition to prevent this nightmare from happenning in the future.
1)AC 97 high def audio version
Realtek HDA 2.67found on http://wikidrivers.com/wiki/Main_Page or at www.realtek.comon right of screen on homepage and
2) Intel HD GRAPHIC and HD Audio version
Intel GMA 15.22.52.2559 (Vista/7) 14.46.8.5387 (XP)
found on
http://wikidrivers.com/wiki/Main_Page.
Select your OS and and whether 32 or 64 bit. I recommend the .exe version as it works very smoothly. Uninstall HD AUDIO DEVICE or whatever it is called maybe "unknown device" with ac97 device ID "HDAUDIO\FUNC_01&VEN_10EC&DEV_0662&SUBSYS_17AA3604&REV_1001." Afterwards install AC 97 HD Audio Driver.
After install reboot and wait till computer completely starts.
Now uninstall Intel HD Graphics or your graphics device. When you get the uninstall box open, select delete the driver software for this device and then OK. When prompted to reboot select NO and Immediately start the install of the Intel GMA driver. Which installs both the Graphics Adapter and the Intel HD Audio. Reboot when finished and all HD Audio devices will be functional (hopefully). You will now have these versions installed. As shown in device manager/device properties/Driver tab
Now uninstall Realtek AC97 driver you first installed to delete annoying Red Lexmark/realtek icon in Notification area (If your computer shows it after reboot) and windows driver update will install a microsoft driver (shown below)that works without the stupid lexmark red icon. See below. You will now have these versions installed. As shown in device manager/device properties/Driver tab
High Definition Audio Device
Driver Provider: Microsoft
Driver Date: 11/19/2010
Driver Version: 6.1.7601.17514
Digital Signer: Microsoft Windows
IntelR) HD Graphics
Driver Provider: Intel Corporation
Driver Date: 1/10/2012
Driver Version: 8.15.10.2622
Digital Signer: Microsoft Windows Hardware Compatibility Publisher
Intel (R) Display Audio
Driver Provider: Intel(R) Corporation
Driver Date: 8/23/2011
Driver Version: 6.14.0.3086
Digital Signer: Microsoft Windows Hardware Compatibility Publisher
Voila. Now go to intel and run a driver update scan and it will likely correctly identify your Intel pieces and offer downloads for any that are not current. Good Luck!

it is a user to user forum without any intervention from apple information-wise.I think this question appears and being discussed in another thread
http://discussions.apple.com/thread.jspa?threadID=2411685&tstart=0

ITunes 64 bit installer rolls back action on win 8 64 bit system

I do not know what i am doing wrong, I just bought a new win 8 64 bit system and iTunes keeps rolling back before the install completes. I have tried running it as administrator and turning off firewall but it did not work. Please Help.

Apple iPad appears to be under "Portable Devices" section and driver is from Microsoft. There is no driver under USB-section and instructions that provided in first reply I have gone thru and they are no go with this problem - they are more likely for older iPod etc devices and dot with issue to deal with 64bit/32bit things. The picture (image.jpg) gives me unfortunately just general error...
--IKemario

Win 7 64 bit and SB Titanium X-FI Drivers

Ok - sound dissapeared yesterday, replaced by some silly High Definition Audio Device driver that doesn't work that well at all. Sound driver pack 2.7 and the latest Beta can't find the card. Tried compatibility mode and tried running as Administrator - no joy. Even tried rolling back a week in case it was a windows update that was the problem, and still no luck. Moved the card to another PCI-E slot - still no luck.
I don't care if it's creative or MS - this is poor - I just spent over a grand upgrading a gaming system I built for 3 grand 2 years ago and this isn't meeting my expectations. Card has worked in the previous rig well (apart from a few shoddy driver releases) and in the new rig it's been working fine for about 2 months until last week. Only system changes have been installing Resident Evil 5, Ghostbusters, L4D2, the new version of VLC and yesterday the latest NVidia driver - unconfirmed if the sound was working before that or not, but the microphone dropped off about a week prior.
For the time being i'm running back to onboard sound (yuk) awaiting direction, but i've been through the posts of the many people who have had the same problems and while running as administrator has worked for some of them - I note that as for myself, it hasn't worked for all of them.
Card unable to be detected via driver installer, auto-updater (admin, compat or otherwise - even the AutoUpdateA file)

-Re: Win 7 64 bit and SB Titanium X-FI Drivers? Sorry - no go - uninstalled the Creative apps and drivers again, uninstalled the MS High Definition Audio Device however it won't let me remove it's driver files (assuming as it's a nati've driver). Every time I uninstall it it wants to restart, every time I restart it's back again immediately. If I uninstall and don't restart, or even if I do, there's NO change to the MS Windows Update results even when forcing a recheck. I'm really stuck.
If I try to li've with the MS HDAD driver with the Li've Titanium in the PC, if I plug anything into the front, to doesn't detect it's there - if I place anything in the back same again. If I remove the headphones it seems ready to accept something? . It's all back to front.
The only time I could get the MS HDAD driver to do anything was with the onboard sound device turned on and the Titanium X-FI removed. Please note that no driver other than the MS HDAD has been loaded on the system for the onboard sound and it is definately turned off at this stage and during testing the X-FI.
I'm going to have a play in Safe Mode, but currently all roads lead to fail.

Unable To Sync After Migrating From Win XP(32 bit) to Win 7(64bit)

I received a new PC, dual core platform, for XMAS. However, I received a Com 1 port failure when performing a Hot Synch to upload my PD(,M500) data to Palm Desktop on the new PC. Palm tech support said there is no USB driver available for the 64 bit OS. Does anyone have a 3rd party USB driver, or any other suggestions to allow me to do a Hot Synch on my new PC.
Thx,
Ed
Post relates to: Palm m500

Originally Posted by mystico2
Hello, i just migrated from windows xp 32 bit because my hd crashed, and installed a new 1 tb hd, with win 7 64 bit, i installed my sb audigy 2 zs sound card, and everything works great, videos, music etc, i have my 5.1 working fine, but if i use flightsim fs2004, the only game i use, the sound doesnt work, it does strange thinks like sound inside the cockpit but no outside and viceversa in some planes, ..it only works fine in my 2 channel default old sound card, i downloaded the drivers that in creative page say are for win 7, but the same happened...
any help?
Try to use Windows XP SP2/3 compatibility mode first, see if it works for you. And use Alchemy for the Audigy 2 ZS, FS2004 is making use of Directsound after all. Read the guide for using Alchemy here and here. Download Creative Alchemy here.
Hope it works for you!

Please help, from win xp 32 bit to windows 7 64 bit, problem in flightsim with sb audigy 2 zs

Hello, i just migrated from windows xp 32 bit because my hd crashed, and installed a new 1 tb hd, with win 7 64 bit, i installed my sb audigy 2 zs sound card, and everything works great, videos, music etc, i have my 5.1 working fine, but if i use flightsim fs2004, the only game i use, the sound doesnt work, it does strange thinks like sound inside the cockpit but no outside and viceversa in some planes, ..it only works fine in my 2 channel default old sound card, i downloaded the drivers that in creative page say are for win 7, but the same happened...
any help?

Originally Posted by mystico2
Hello, i just migrated from windows xp 32 bit because my hd crashed, and installed a new 1 tb hd, with win 7 64 bit, i installed my sb audigy 2 zs sound card, and everything works great, videos, music etc, i have my 5.1 working fine, but if i use flightsim fs2004, the only game i use, the sound doesnt work, it does strange thinks like sound inside the cockpit but no outside and viceversa in some planes, ..it only works fine in my 2 channel default old sound card, i downloaded the drivers that in creative page say are for win 7, but the same happened...
any help?
Try to use Windows XP SP2/3 compatibility mode first, see if it works for you. And use Alchemy for the Audigy 2 ZS, FS2004 is making use of Directsound after all. Read the guide for using Alchemy here and here. Download Creative Alchemy here.
Hope it works for you!

No "complete" sound,HP P6610F Win 7 64 bit

Similar Messages

Maybe you are looking for