No completion tracking w/o quiz question in v.7?

Just noticed today that several courses we had created in 6, but updated in 7, no longer seem to count completers as "complete" in our LMS.  These courses do not contain graded quizzes.  In 6 we had set a % of slide views to indicate completion.  I just read the fine print in 7 and it indicates that, unlike in 6, the score for any content without graded quizzes is zero.  Am I reading this correctly, Adobe?  And if so, why on Earth would you do this?  Moreover, one would have to dig rather far down into the fine print ( as I just did) before experiencing the upgrader's remorse I am on the verge of experiencing.
Anybody?

Aaron, I use a Fantom XR SPDIF output to record. The
thing you must remember is the XR's SPDIF will have
to be the Master Clock reference for Logic otherwise
you will get clicks and pops!
Check the settings in the Audio/MIDI setup under OSX.
You will need to set the Mbox2 as the master clock as
this is receiving the SPDIF input. Hopefully the Mbox
will detect SPDIF and accept that as Master.
Restart Logic and ensure you have sample rate set to
44.1Khz as that is what the frequency of SPDIF is.
I'm aware that this may sound complicated but at the
end of the day if you record from a SPDIF source, it
has to be the master clock for Logic.
Good luck, Rik.
Rik, I was wonder how this would work. When I tried to use
SPDIF with my Mbox1, I could never get Logic to see the
input. I am not sure it was supported. But I can use my
Saffire's SPDIF but I have never set it up as master. When
you mentioned it had to be the master clock, I went into Logic
to see if it showed up as a choice. For syncing Logic only has
choices for
internal
midi clock
MTC
Manual
which one should I use to make the interface the master?
Logic only mentions listening for MMC.
Thanks

Similar Messages

  • Quiz Questions provide no selectable answers in HTML5 Publish

    I am having issues with quizzing, whereas HTML5 format doesn't allow the user to select answers in quiz slides…
    I am publishing a Captivate 7 project to two separate LMS' for beta testing purposes.
    When I publish the project as HTML5 only, the quiz question appears as well as possible answers, but the form field does not appear, therefore rendering the user completely incapable of selecting an answer.
    Publishing the same project as swf and HTML5 renders perfect results. (Quiz slide, selectable answers, and form field all show up and work)
    Any advice?

    I solved my own problem.
    I had inserted a background image into each of the question master slides.
    When looking at either the master slide or timeline slide, the slide would lokk good. All text and slide objects, including answers, would show up on the slide as they should.
    However, once published, the background image would cover the form fields used to select correct answers. This not only prevented the user from selecting an answer, but also caused major issues with audio and CC tracks after the quiz.

  • SCORM completion w/o a quiz

    I have a number of presentations which we need to export for
    SCORM to run in SABA. However, the presentations don't actually
    have a quiz. I want them to be marked as complete in the LMS when
    the user finishes the last slide of the presentation. Is this
    possible? If so, how?
    Cheers

    Best way to troubleshoot this is to identify exactly what
    changes were
    made, revert back to versions that did work properly, and
    slowly
    implement those same changes - 1 by 1 - until you hit upon
    the problem
    again.
    I've seen inconsistencies as you describe, but always in the
    case where
    there are several quiz questions that are being fully tracked
    (question,
    answer, selected response). Captivate waits something like 4
    seconds
    between posts to the LMS with the most recent activity. If
    there is a
    lot of data, that can take a while...so the user may quit the
    lesson
    before the update is made....resulting in lost bookmarks
    and/or improper
    completion status.
    Not sure why that would happen with a non-quiz lesson.
    Perhaps minimize
    the tracking options in the Quiz Preferences?
    Also start as 'fresh' as you can in the LMS. Ensure the
    previous lesson
    is reset or removed before uploading the new version, or
    change the
    name/manifest to ensure the SCO is uploaded as a new lesson.
    HTH
    Erik
    tiesdell wrote:
    > After the first round of testing, there were some
    editorial changes made, they
    > were re-published to the LMS with the same settings, and
    now we are
    > experiencing inconsistent behaviors with the
    presentations. Some are
    > bookmarking, some are not. Some are marking as complete,
    some are not.
    Erik Lord
    http://www.capemedia.net
    Adobe Community Expert - eLearning
    http://www.adobe.com/communities/experts/
    http://www.awaretips.net -
    Authorware Tips!

  • Learners unable to enter answers to quiz questions

    I've launched our first course and I'm coming across an issue that I haven't encountered as we tested the course.
    I've created the course in Captivate 5.
    All of our learners are using their own computers to complete the training, and I have no control over what equipment they are using.
    A couple have reported that they are unable to enter answers to the quiz question. For example, it won't even let them click on the buttons for multiple choice answers. Those that have reported the issue seem to have older computers (around 5 years old), but say they've updated to the new version of flash player.
    We've tested the module on somewhat newer computers, and we haven't come across that particular issue at all.
    What could cause such a problem?
    sanna

    I think this is what I will try. After I had a chance to talk to those that encountered the issue they said they had moved backwards in the course.
    It never occured to me when testing the course to skip backwards and forwards. Lesson learned.
    Now when you say include a 'scored' button, what do you mean?
    I already have a 'next' button at the beginning of the course that the learner clicks to get started. It's an image button. I see when I look at the properties for that image button that there is an option to include it in the quiz. Is that what you meant? Set it to be included in the quiz?
    Does it make a difference whether or not points are assigned to it, or whether or not it is included in the results?
    Thanks

  • Issue with First Quiz Question

    When I try to go back BEFORE answering the first quiz
    question, when I move forward again to the first question, it tells
    me that "You did not answer the question completely"and it will not
    allow me to answer this question or any additional questions. (I
    have set the option to use the BACK button in a quiz.) If I answer
    the FIRST question, it allows me to go backwards on any additional
    questions. Why can't I move backwards before I answer the first
    question? Is there something I am missing?

    As Mzedella said, my understanding is that backing out of the
    quiz (going backwards past the first question) costs the user an
    attempt, so if you've only allowed one attempt, the questions are
    considered not answered....
    We have a mix of content and questions (not a single block of
    quiz questions), and wanted to allow backward movement. We solved
    this problem by making the first slide a question. That way, the
    user is always in the quiz and they can move backward as much as
    they like.
    If you can't think of a good question for the first slide
    (often a question about their background knowledge is good), you
    can always make it 'are you ready to begin?'. A little clumsy, but
    you get the functionality you want.
    We further required all questions to be answered, so users
    can't skip ahead past unanswered questions. By removing the nav
    bar, but including a menu (via skin), users can easily review the
    material, but are still required to at least click through all the
    slides. This works for our application, but you many want something
    different.

  • Quiz questions answered not considered

    Hello,
    I created a multiple choice quiz with a few questions, but as I preview it (in a browser and in the project preview section of Cp), or publish it and play it (same places), the answers that I enter are not being considered, every time I keep getting the "You did not answer this question completely" message when I review the quiz after getting the score. The correct question is selected properly on each slide, where I click on the circle to the left of the correct question.
    Thank you for your help with this,
    Manuel

    Manuel,
    Your quiz question slide in this project may be corrupted.  Try opening a new blank project and insert ONE multi-choice or True/false quiz question there and test the functionality.  Does a new blank project work properly?
    If so, delete the problem slide from your existing project and re-insert new ones to replace it.  Let us know if that works.
    One more thing.  DO NOT REMOVE any of the default question slide text captions from quiz slides.  Doing that can cause strange behaviours.

  • Answer quiz questions in any order?

    I am creating a project that branches into three main topics
    from a menu. At the end of each topic there is a set of quiz
    questions. If the users choose to complete, for example, topic two
    or three before topic one then the questions after topic one read
    the message "You did not answer this question completely" and the
    user can not choose an answer.
    I believe this is becuase they are completing questions 4-8
    (for example) before questions 1-3. How can I change my project so
    that they can answer the questions in any order.

    Hi Lougle and welcome to the Captivate forums!
    Captivate REALLY wants you to take quizzes in linear order,
    so if it's possible at all to allow non-linear movement, your best
    bet is probably going to be as follows:
    In the Settings node of the Quiz properties:
    1) Required dropdown =
    Optional - the user can skip the quiz
    2) Allow backward movement checkbox =
    Checked
    Ideally, the combination of the two should allow both forward
    and backwards movement, but with Captivate quizzes, nothing is
    certain.
    Let us know how it works out!
    Cheers,
    John

  • Multiple Quiz Questions on one slide

    Hello Captivators,
    I am using Captivate 3. It seems a waste of space to have one
    quiz question per slide. Is there a way to have more than one
    question per slide?
    Thanks,
    eholz1

    Hi eholz1
    Sorry, but there is no current way to combine multiple
    questions on a single slide. If you would like to suggest this
    feature to be considered in a future release, you may do so by
    clicking
    here and completing the form you will find there.
    Cheers... Rick

  • Video in a quiz question

    Hello,
    Is it possible to insert a video in a quiz question. For example, I would like to be able to show a video and when the video is complete, the user is quized. I want the user to be able to see the video next to (above, below, etc) the quiz qustions.
    Thanks!

    Absolutely! Which version of Cp are you using. If you are using Cp5 or 5.5, you can insert FLV or F4V into a question slide and manipulate its properties the same way you would in a regular slide.

  • Captivate 6 - Published - PDF does not play quiz questions

    I just published my captivate 6 presentation.  I am launching the .pdf file to view.  At the end, the quiz questions do not work.  I get a white screen and not my questions.  Any ideas?  Thanks

    Below is a screen shot of the published settings.  The whole training presentation plays as expected.  Then when it gets to the quiz questions I get a white screen and nothing happens. 
    After I publish, I go to the zip file and run the pdf version. 
    This is for someone to view the training outside of our LMS system.
    Here are the preferences ....

  • Stuck in course before quiz question

    Hi. I have a course where users get to a quiz question, then after going backwards to review content prior to that quiz question, then upon trying to go forward again, gets stuck on the content slide right before that quiz question and can never move forward again.
    Quiz is set to Answer All, allow backward movement
    Course is locked for every slide, Advnace by user

    Hi,
    Please check the number of attempts you have allowed per question, if the attempt set per question is one, the slide would get locked and would not allow any further attempts to be made
    Please check the attempts for each question, modify it with number that you would like to allow.
    Thanks,
    Anjaneai

  • Modifying Quiz Question Format/Content

    Issue: When we modify a quiz question in PowerPoint and then
    go to the Quiz Manager the entire slide deck reverts to the format
    before the changes, regardless of being saved previously.
    Has anyone had this happen..please help.
    I am trying to make edits/changes to a long presentation that
    I need to deliver tomorrow and I keep losing the work I am doing.
    Is there a better way to make the changes to the slides?
    Thank you,
    Scott

    You can't modify quiz questions in the presentation itself -
    you need to make those changes in the quiz manager itself. You can
    adjust font size, lay out, etc on the slide itself, but not the
    content

  • Quiz questions will not retain format when question is changed.

    OK forum folks. I'm working on my first e-learning project and have ran into a problem with question formating. The instructions/help basically tell you to click here and click there. I can easily figure that out. The questions I seem to have are quite a bit deeper.
    I have a predefined template which is company approved. I have created master slides in the question pool for both a 4 item match and a 5 item match (I have found if I add a line to the 4 matching line quiz the line spacing and formatting changes). The placeholder questions are essentially non-questions.
    I duplicate the master slide in the question pool to maintain the original format (spacing, location, etc.).
    I change the placeholder questions on the duplicated slide to the real question (slide is still in the slide pool)
    The formatting (font, spacing, locations, etc.) change on the new (edited) questions and require reformatting.I have also tried copying the master question slide to the filmstrip and editing the copied slide questions in the filmstrip. I receive the same results.
    Is there are way I can create masters in the current format so I can use the approved templates, edit the questions and not have to reformat the slide after the questions have been changed?
    Also, is there a way to lock the formatting of the questions? If I want to add/delete a new question or line to the slide, it would be great to be able to not have to reformat the slide for the change.
    I look forward to your answers.
    Thank you.

    I am trying to deal with the same issue. The master slides are more about background elements and navigation buttons, but they do not seem to allow for the addition of quiz elements.
    I have come up with a workaround that I hope will work. What I am doing is creating a new project that becomes my quiz question layout library (Let's call this Project 2). In this project I add the various types of questions I will be using in my project (multiple choice with three choices, multiple choice with five, true/false, etc...). I get all the quiz elements in place for each type of question (the header, question, submit/clear buttons, review area, etc...).
    These slides serve as my Master slides for my actual project (Project 1). I can copy and paste the appropriate layout from Project 2 to Project 1 and then change the questions themselves.
    I am sure I will find out the downside of this soon enough...
    There is no doubt the creation of masters for quiz questions needs work, actually it needs just to exist!

  • Extra line after first item in quiz questions

    I just started using Captivate 7.  I made a template with some quiz questions and there is an extra line after the 2nd radio button in the templates for multiple choice and true false questions.  Is that normal ?
    Screen shot.

    I'm experiencing the same problem, also on Captivate 7.
    The alignment is fine on the master slide, but every time I load a multiple choice or true/false question the "B" answer appears like this.
    I've tried it with every theme and the same thing is happening. I've also had the program uninstalled and reinstalled and still the error is there.
    I've searched on different forums, but no one seems to have the answer.

  • Quiz question formatting

    Is there any fix in the works for controlling how Quiz
    Manager formats quiz questions/answers? Every time we need to make
    an edit and go back into Quiz Manager, we have to reformat our quiz
    slides. This is extremely time consuming and frustrating. Please
    Adobe, put some formatting controls into the quiz manager (such as
    font size), or fix your program in such a way as to not touch the
    formatting that we do to our quiz question slides in
    Powerpoint.

    I have worked a lot with presenter and have manually formated
    the look of the questions after the slide has been generated and
    have not ever had an error. I have changed location, spacing, font,
    and size and added content to quiz slides, all without incident.
    Are you using Presenter 6.2? This may be an issue of using an
    older version of Presenter.
    Jorma@RealEyes

Maybe you are looking for