No computer found on 3510 when trying to scan

My printer copies and prints just fine.
However if I want to scan a message say No Computer Found.
HELP

Hey @Bajagirl1,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the issue you're experiencing when attempting to scan from your HP Deskjet 3510 e-All-in-One Printer to your Windows XP computer. Now because you're getting the message 'No Computer Found' there may be a conflict occuring with the software installed on your XP computer or there may be a connection conflict occuring between your HP Deskjet and your Windows computer. Can I please have you follow the steps below to resolve this issue.
To start can I please have you click here to download and run the HP Print and Scan Doctor Tool. This Tool will run on your computer and 'fix scanning' issues for you. Should any driver, software, or connection conflicts be found than the HP Print and Scan Doctor Tool will attempt to resolve those conflicts for you.
Once the HP Print and Scan Doctor Tool has completed please test scanning again to verify if the issue has been resolved.
Please respond to this post with the result of your troubleshooting. Should the issue persist, please let me know if the HP Print and Scan Doctor encountered any errors during the 'fix scanning' process. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Similar Messages

  • PIXMA330 and new computer with Windows 8.1. Error Code 2,148,0 when trying to scan

    I have a PIXMA330 and bought new computer with Windows 8.1. I get error code 2,148,0 when trying to scan. I tried to download updated driver but still have the problem. Is this common? Thank you.

    You may have a BIOS problem, but there are no drivers for the BIOS.  The BIOS is the system firmware.  You will have to go to the support website of the computer/motherboard manufacturer to look for a BIOS update as Windows has nothing to do with
    the BIOS - that is the sole responsibility of the computer/motherboard manufacturer.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Error message when trying to scan to email or fax

    when I try to scan to email or fax i get this message:
    "secure connection to SMTP server could not be established..."
    I didn't have this problem when I first got the laserjet pro 200 m276.
    any thoughts on how to remedy>

    Hi MACSRC1,
    I see by your post that you are getting the error "secure connection to SMTP server could not be established" when trying to scan to email or fax. I can help you with this.
    I have provided a document to check your scan settings. You might have to run the wizard again.
    How to Scan: From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder).
    Click on Scan to email.
    This document is for Cannot Send or Receive Faxes to go through to resolve the fax issue.
    What email provider and email program are you using?
    What operating system are you using?
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    How to Find the Windows Edition and Version on Your Computer.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Error message 403 when trying to scan

    Hi 
    I have never had this error message before but all of a sudden when I am trying to scan to email i am getting error message 403 server connection - I have checked and printer is connected to internet? Hope you can help!

    Hello @Jo1974 ,
    Welcome to the HP Forum.
    I understand that you are getting a server connection error when trying to scan to email.
    I would like to help you with this.
    Try setting a manual DNS.
    This post by happytohelp01 should help show you how.
    Efax 7510 still won't work after turning off/on ePrint several times
    If that does not clear the error message, please let me know.
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • HP Deskjet 3520 Prints too small and when trying to Scan it says can't find Computer..

      HP Deskjet 3520 ALL IN ONE & E-PRINTER I have had this printer about 1 year and have never got it to print out things(Some) where it can hardly be read. (I have to have a magnifyng glass to read some of it others fine. The kind I AM NOT ABLE to read are pre-printed materials.  The kind I AM ABLE to read adequately are things I type out on my Computer and then copy or print out it does fine..  Also when attempting to Scan a piece needed to Scan and printer set to Scan it said no Computer could be found. Can someone tell me how to fix these problems. This printer says 'ALL IN ONE e-Printer but it does not fax.

    Hi @mybeaugie 
    I see you are trying to make the font larger on your printed output, but the small text is only happening when you print from programs aside from documents you create. If you are using Internet Explorer you can use this document; Text is Small When Printing from Internet Explorer. If however, you are using AOL you can following these instructions from this post, 'how do i make the text larger'.
    As you can see modifying the text size is going to depend on the program you are using. If you are not using Internet Explore or AOL, can you please post back with more detail. What Browser are you using and what Operating system do you have?  Mac or Windows?
    I understand you are also getting a communication error when you try scanning.  Running the Print and Scan Doctor might help. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
    Connectivity:
    USB: Verifies that the USB connection from your computer to the HP product is working correctly.
    Network: Verifies that the network connection between your computer and your network is working correctly.
    Device Status Test: Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
    Driver Check: Checks for missing or corrupt driver files.
    Device Manager: Checks for problems in Device Manager that would prevent printing.
    Device Online: Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
    Print Queue: Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
    Port Match: Checks the port settings for the HP product.
    Device Conflicts: Checks for conflicts with other drivers, such as other printer brands.
    Ink Issues: Checks the cartridges and ink levels for issues that affect print quality.
    Print Settings: Checks and adjusts the print quality settings.
    Test Print: Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
    Scan Tests: Checks the scan mechanism, drivers, and registry entries.
    Source:Try the HP Print and Scan Doctor for Windows
    Click here to download and run the Print and Scan Doctor> www.hp.com/go/tools
    If that does not resolve the issue, post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
    If you see only green check marks (), the tool did not find any problems.
    If you see green wrenches (), the utility identified an issue and corrected it automatically.
    If you see yellow exclamation points (), the test failed and required user action, but the step was skipped.
    If you see a red X (), follow the on-screen instructions to resolve the issue.
    If the scan issue persists, try the steps in the following document and let me know the outcome of your efforts; An 'An error occurred while communicating with scanning device' or a 'There is no computer connectio...
    Looking forward to hearing from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • File Not Found error (-43) when trying to record

    Never had this problem in the past, and haven't used Logic in a few months, but every time i attempt to record, i get that message: File Not Found, Result code error -43
    I am using the MBox 2 Pro as my record in, and Logic 6.4.3
    Thanks for the help...

    Hi,
    I have a 'file not found' problem with Logic Express. A while back I transferred all my Logic files to DVD to make room on the hard drive. It took 4 discs, saved alphabetically by song title. Now, I nearly always get the 'file-not'found' error message when I try to work on something. Sometimes when I click 'search' it finds the file, sometimes it doesn't. I'm confident that I didn't delete the files.
    Wondering if 'search' would find the files if I transferred all the files from DVD to a single folder on an external drive. I don't use the 'search manually' option, because I'm not really sure what I'm looking for, or where to look. In the other room, perhaps? 'Computer challenged' is me. Any suggestions?
    DS

  • HP Photosmart 7520 not connected to computer when trying to scan

    Hi!!
    I have an IMac.  I can print from my computer, and my computer recognizes my printer (HP Photosmart 7520), however, my printer will not connect to my iMac...Help!  ;-)
    When I am trying to scan, the exact warning is:  "No Connection:  No computer is connected.  See printer Help and documentation to troubleshoot the connection."
    When I go to printer Help and doc, it says to install the HP software on my computer.
    I already went through most of the troubleshooting steps I could find (on my computer and online) - they only dealt with my computer not recognizing my printer...not vice versa...
    The little bluetooth light is lit and going strong...
    Thanks in advance!!!
    Katie

    Hi @ktsue,
    Welcome to the HP Forums!
    I understand that you cannot scan with your HP Photosmart 7520 on your Mac. I am happy to help you with this scanning issue!
    For further assistance, I will need some additional information:
    The version of Mac Operating System that you are using. To find the exact version, visit this link. Whatsmyos.
    If the printer is connected, Wireless, or USB.
    If the printer is able to make copies. Copy Text or Mixed Documents.
    If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well. 
    In the meantime, please see this scanning guide, A 'No Computer Detected' or 'Connection Error' Message Displays for HP Photosmart 7520 e-All-in-One .... (Even though the guide title may not match your issue, I believe the solutions will help).
    Thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Hp officejet 6500a/ using 8.1/ when trying to scan it keeps telling me no computer detected???

    ANY HELP FORTHCOMMING WOULD BE APPRECIATED, ITS DRIVING ME NUTS!!!!     TX.

    Hi,
    Have you installed new software and drivers on Windows 8.1 machine yet ? If yes, please initiate scan from computer first.  Scan from computer will give you more options than scan from the printer itself.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • ENVY 5530 All in One not founf when trying to scan from Printer Assistant

    I just purchased and installed (online) HP ENVY5530.  It will print, but will not scan from the desk top ,Printer assistant nor from the printer to the computer.  message comes up "The HP ENVY5530 series wasn not found."  I've tried the print scan doctor and also uninstalled and installed again still doesn't scan.  Any ideas?

    Hi 3412, Ok, open Add/Remove from Control Panel, and then uninstall everything associated with this printer. Once you have it uninstalled reboot the computer. Download and run the following Utility to assist with getting the printer installed to your computer. Let me know if you continue to have issues? The HP Printer Install Wizard for Windows was created to help Windows 7 and Windows 8 users download and install the latest and most appropriate HP software solution for their HP Printer.
    Simply run the tool and follow the on-screen instructions.
    NOTE: The HP Printer Install Wizard for Windows does not support Windows RT for ARM-based tablets or computers. Installation of additional printing software is not required. HP recommends that users utilize the print capabilities already included in Windows RT. HP Printer Install Wizard for Windows

  • Hp 7520 gives error message when trying to scan to email. Says not connected to Internet......

    Can anyone help. I can't scan anything! Say not connected to web, but I am!

    Hi Finner6,
    Welcome to the HP Support Forums. I see that you are getting a connection error when trying to use the scan to email feature of your Photosmart 7520 printer.
    Please set a manual IP address and manual DNS servers for the printer. I have included a link to another post that has the steps with screen shots on how to do this. Don’t worry that the screen shots are for a Photosmart 7510, the steps are the same.
    If after setting the manual IP address and DNS servers you are still getting the same error message, please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • HP Officejet 8600 is not recognized by Acrobat 9.5.5 when trying to scan

    When trying to create a PDF document via Acrobat (file/create PDF), Adobe does not recognize my new HP Officejet 8600 print/scan/fax/etc.  Any solutions?

    Make sure you have the latest and greatest TWAIN driver from HP.
    If that does not work output TIFF files from the scanner then use Acrobat to create PDF from the TIFF.
    Be well...

  • Error when trying to scan from my HP DeskJet 3050 J610 (com.apple.ImageCaptureCore -9929.)

    When trying to use my HP DeskJet 3050 J610 series I get an error (com.apple.ImageCaptureCore -9929.)  It can't scan.  Anyone know how to fix it?

    The error is ICReturnScannerFailedToSelectFunctionalUnit, but I am not sure what that means. Is there an HP disgnostic available? Are the drivers current? Maybe HP has some experience with this error.

  • Have an error message when trying to scan photos

    I get the following message when scanning using Element 6:
    Failed to obtain files from device.  The file size exceeds the maximum size allowed.  To decrease the file size, ry reducing the image resolution or dimensions.
    Do I need to get a higher resolution scanner?  I'm trying to scan a picture at 1200 pixel.
    thanks

    Are you scanning into the pse 6 organizer?
    MTSTUNER

  • When trying to scan using Windows8.1 cannot see printer

    Just bought new computer with Windows 8.1.  Cannot scan - when I try it says it can't see the printer.  I've downloaded all the suggested updates etc from HP as instructed - still no good.  Printing from word etc is fine.

    Hi,
    Have you installed new software and drivers on Windows 8.1 machine yet ? If yes, please initiate scan from computer first.  Scan from computer will give you more options than scan from the printer itself.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Adobe Acrobat Pro X Crashes when Trying to Scan to PDF - Epson Perfection v30 on Windows 7

    I am running Windows 7 with Acrobat Pro 10.0.0
    I have a Epson Perfection v30 Scanner installed. I open Acrobat, and when I select Scan to PDF, pick the v30 Scanner, and start the scan, it does actually start and complete the scanning process. However, at the moment where it displays the results of the scan, Acrobat crashes with the following Signature:
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: Acrobat.exe
    Application Version: 10.0.0.396
    Application Timestamp: 4cc5ebc0
    Fault Module Name: sdc330Twain.ds_unloaded
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 4dcc0018
    Exception Code: c0000005
    Exception Offset: 0505546d
    OS Version: 6.1.7601.2.1.0.256.4
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    We have 8 machines with Acrobat and this Printer, and I am able to repeat this with each system.
    Does anybody have any ideas? Is anybody using the Epson Perfection v30 scanner?

    Any ideas?   there was an update on adobe dated 2/25/13.   Perhaps if I uninstall it?   I need advice on how to uninstall. When I view updates and click on it, and then click uninstall, it goes back to the Program Screen, in Control, for all programs. Then do I click on Acrobat and Uninstall?  I am nervous about doing this. Thanks

Maybe you are looking for