No computers are shown on my WSUS console
Windows 2012. The updates are showing but no computers.
I have setup the gpo policies as per instructions. Not using client-side targeting. Initially and before my time there was a WSUS server on 2008 r2 but it would not pickup any WIN 8 workstations. That machine was decommissioned and have introduced WIN 2012
but it is NOT working at all
Am 26.05.2014 schrieb ioscom:
I have setup the gpo policies as per instructions. Not using client-side targeting. Initially and before my time there was a WSUS server on 2008 r2 but it would not pickup any WIN 8 workstations. That machine was decommissioned and have introduced WIN 2012
but it is NOT working at all
Did you use Port 8530 in your GPO?
http://yourWSUS:8530
Servus
Winfried
Gruppenrichtlinien
WSUS Package Publisher
HowTos zum WSUS Package Publisher
NNTP-Bridge für MS-Foren
Similar Messages
-
Can't view all the computers in my network on WSUS Console
Hello Everyone,
Windows Server 2008 R2
WSUS 3.0
The issue is: Can't view all the computers in my network on WSUS Console
1/ Installed Windows Server Update Services (WSUS)
I followed the steps how to install Windows Server Update Services ( WSUS ) correctly by following steps on technet.microsoft.com
2/ Edit Group Policy Management (GP)
Open "Group Policy Management" Console
by right click "edit" the "Default Domain Policy" and It took me to "Group Policy Management Editor"
I changed the "Windows Update" Setting under "Group Policy Management Editor"
by doing to "Computer COnfiguration > Policies > Administrative Templates > Windows Components > Windows Updates"
------------------------------------------------------------------------------------------------------|
|Enable |
|-----> Configure Automatic Updates
|
| ------>
4 - Auto download and schedule the install |
| |
|Enable |
|-----> Specify intranet Microsoft update service location
|
| ------>
http://ServerName.DomainName.net |
| (Address of the server where WSUS updates are downloaded to)
|
| |
|Enable |
|-----> Automatic Updates detection frequency
|
| ------>
22 |
| (hours)
|
|Enable |
|-----> Enable Client-side Targeting
|
| ------>
Win7; Server |
| (Name of the Computer Groups)
|
|------------------------------------------------------------------------------------------------------|
FYI: go to CMD and type "gpupdate" to apply the updates right away without waiting for the automatic one
3/ Launch Windows Server Update Services (WSUS)
a/ Run the WSUS Wizard
I ran the WSUS Server Configuration Wizard under Option on the left panel and followed it by running the
synchronization.
------------------------------------------------------------------------------------------------------|
|Choose Upstream Server |
|-----> Synchronize from Microsoft Update and press on next
|
| |
|Specify Proxy Server |
|-----> Left blank ( I won't be using a Proxy server) and press on next
|
| |
|Connect to Upstream Server |
|-----> Press on "Start Connecting" and wait until it's done, press on next
|
| |
|Choose Product |
|-----> Select the product needed and Press on next
|
| |
|Choose Classifications |
|-----> Select classification needed and Press on next
|
| |
|Configure Sync Schedule |
|-----> Synchronize automatically and press on next
|
| |
|Finished |
|-----> Check "Begin initial synchronization" and press on next
|
| |
|What's next |
|-----> It open the Help menu if you click on one of the four links
|
| ----->
Press on Finish |
|------------------------------------------------------------------------------------------------------|
FYI: The synchronization might take hours if it's run for the first time
b/ Computer Group Settings
Go to "Options" under "Update Services" and click on "Computers"
Change the option to "Use Group Policy or registery settings on Computers."
And click on "OK"
Final Result:
(only 4 computers are showing) all being under the same operating system, missing about 7 computers used as hosts with Windows 7 running on VMHi
You have to apply the WSUS Gpo policy to your computers OU(or which OU computers incelude). -
Computers are not showing up in WSUS admin console
I have just deployed WSUS 3.2 on Server 2012 R2. All my client computers are Server 2012 R2 as well. I configured all the settings via the default domain GPO to point to my WSUS server and when I check the reg settings on any of the clients I see all the
settings I configured in the GPO are being pushed down. But when I go to the All Computers in the WSUS console there are no clients showing up. At first I thought it had to do with the port number not being in the Specify Intranet Microsoft update service
location all I had was the server name. I then changed it to 'servername:8530' and that change got pushed down but still no clients show up in the Computer's section in the WSUS admin console.
Is there something I should check or may be missing here?
ThanksThanks for the help. Below is the windowsupdate.log file. I stopped the update service renamed the old log file and let it create a new one.
2015-01-06 13:40:14:038
720 218c
Misc =========== Logging initialized (build: 7.9.9600.17415, tz: -0500) ===========
2015-01-06 13:40:14:038
720 218c
Misc = Process: C:\Windows\system32\svchost.exe
2015-01-06 13:40:14:038
720 218c
Misc = Module: c:\windows\system32\wuaueng.dll
2015-01-06 13:40:14:038
720 218c
Service *************
2015-01-06 13:40:14:038
720 218c
Service ** START ** Service: Service startup
2015-01-06 13:40:14:038
720 218c
Service *********
2015-01-06 13:40:14:069
720 218c
IdleTmr Non-AoAc machine. Aoac operations will be ignored.
2015-01-06 13:40:14:069
720 218c
Agent * WU client version 7.9.9600.17415
2015-01-06 13:40:14:069
720 218c
Agent WARNING: SleepStudyTracker: Machine is non-AOAC. Sleep study tracker disabled.
2015-01-06 13:40:14:069
720 218c
Agent * Base directory: C:\Windows\SoftwareDistribution
2015-01-06 13:40:14:069
720 218c
Agent * Access type: No proxy
2015-01-06 13:40:14:069
720 218c
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2015-01-06 13:40:14:069
720 218c
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 2.
2015-01-06 13:40:14:069
720 218c
Agent * Network state: Connected
2015-01-06 13:40:14:085
720 218c
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2015-01-06 13:40:14:085
720 218c
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 2.
2015-01-06 13:40:14:116
720 218c
Agent *********** Agent: Initializing global settings cache ***********
2015-01-06 13:40:14:116
720 218c
Agent * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2015-01-06 13:40:14:116
720 218c
Agent * WSUS server: IADWSUS01:8530
2015-01-06 13:40:14:116
720 218c
Agent * WSUS status server: IADWSUS01:8530
2015-01-06 13:40:14:116
720 218c
Agent * Target group: (Unassigned Computers)
2015-01-06 13:40:14:116
720 218c
Agent * Windows Update access disabled: No
2015-01-06 13:40:14:116
720 218c
Misc WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
2015-01-06 13:40:14:116
720 218c
WuTask WuTaskManager delay initialize completed successfully..
2015-01-06 13:40:14:116
720 218c
AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2015-01-06 23:16:19, not idle-only, not network-only
2015-01-06 13:40:14:116
720 218c
AU Timer: 143FB093-8AA1-4DBC-A582-8806F8F4C1F7, Expires 2015-01-07 22:13:54, not idle-only, not network-only
2015-01-06 13:40:14:116
720 218c
AU Timer: CF1ABEC6-7887-4964-BB93-B2E21B31CEC1, Expires 2015-01-07 15:10:18, not idle-only, not network-only
2015-01-06 13:40:14:116
720 218c
AU Timer: 29A863E7-8609-4D1E-B7CD-5668F857F1DB, Expires 2015-01-07 15:10:01, not idle-only, not network-only
2015-01-06 13:40:14:132
720 218c
Report WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
2015-01-06 13:40:14:132
720 218c
Report CWERReporter::Init succeeded
2015-01-06 13:40:14:132
720 218c
Agent *********** Agent: Initializing Windows Update Agent ***********
2015-01-06 13:40:14:132
720 218c
DnldMgr Download manager restoring 0 downloads
2015-01-06 13:40:14:132
720 218c
AU ########### AU: Initializing Automatic Updates ###########
2015-01-06 13:40:14:148
720 218c
AU Additional Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} with Approval type {Pre-download notify} added to AU services list
2015-01-06 13:40:14:148
720 218c
AU AIR Mode is disabled
2015-01-06 13:40:14:148
720 218c
AU # Policy Driven Provider: IADWSUS01:8530
2015-01-06 13:40:14:148
720 218c
AU # Detection frequency: 22
2015-01-06 13:40:14:148
720 218c
AU # Approval type: Pre-install notify (Policy)
2015-01-06 13:40:14:148
720 218c
AU # Auto-install minor updates: No (User preference)
2015-01-06 13:40:14:148
720 218c
AU # ServiceTypeDefault: Service 117CAB2D-82B1-4B5A-A08C-4D62DBEE7782 Approval type: (Pre-download notify)
2015-01-06 13:40:14:148
720 218c
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2015-01-06 13:40:14:148
720 218c
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 1, GetLastError=2250
2015-01-06 13:40:14:148
720 218c
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 3, GetLastError=2250
2015-01-06 13:40:14:148
720 218c
AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
2015-01-06 13:40:14:148
720 218c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-01-06 13:40:14:163
720 218c
AU AU finished delayed initialization
2015-01-06 13:40:14:163
720 218c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-01-06 13:40:14:163
720 218c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-01-06 13:40:14:163
720 218c
AU Adding timer:
2015-01-06 13:40:14:163
720 218c
AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2015-01-06 23:16:19, not idle-only, not network-only
2015-01-06 13:40:14:163
720 1b9c
DnldMgr Asking handlers to reconcile their sandboxes -
Hello,
Within the past two months our WSUS Server started throwing error 13002, "Client computers are installing updates with a higher than 25 percent failure rate. This is not normal." We currently have 252 computers with errors in WSUS,
and 33 updates with errors. We have never had issues up until two months ago. If you keep rebooting the machine, and keep running updates, they eventually all install. I believe I will see the machines with errors go away as the weekly scheduled
WSUS install runs over and over, and the machines reboot.
- We run IE8 in our environment and sometimes IE9.
- We have 300 clients, all running Windows 7 SP1 x64.
- Our WSUS server is running on Server 2008 R2. The WSUS build number is 3.2.7600.262.
- We created an alternate WSUS 4.0 server on Server 2012, and redownloaded all updates. We put one client on it and it is showing errors on 3 updates, KB890830, KB931125, and KB2917500.
- Clients are throwing errors 800F0902, 80242016, and 80070005.
- I've noticed something with the C:\Windows\SoftwareDistribution\Download folder on the clients. When an update runs and fails, there is a "Install" folder created inside this folder. If you try to open it after the failure you get
"Access Denied" If you reboot the machine, the install folder goes away. (I assume this is a temp folder created to run updates). I've checked the permissions on this folder on various machines and all seems normal. I think
this is the root of the problem, and why we need to keep rebooting to get all of the updates to run.
- I tried deleting the Software Distribution folder on a client after stopping the update service, then restarting the update service. The folder redownloads but the client still throws errors.
- I've gone through our Group Policies looking for anything that can cause this and found nothing. We've created a test OU blocking inheritance, and only applying a WSUS policy in it to make it get the updates internally. I then rebuilt multiple
machines using Dell KACE, and still had failures.
- We run SEP 11 and 12 on our clients. I've tried removing the AV, making sure the firewall was off, etc. It still throws errors.
- I've spoken with our network team, and installed wireshark on a few clients looking for network errors and found nothing.
- I've tried various Dell KACE scripted installs on test machines (erasing and rebuilding the machines from scratch), after which I run Windows Updates from WSUS. They have thrown errors.
- I've rebuilt a machine using Dell KACE, undomained it, then ran updates externally from WSUS going to Microsoft's site, and I'm still getting errors.
- I've tried removing all software from the Dell KACE build to where it is just installing the OS and I'm still getting errors.
- I tried taking a plain Windows 7 x64 DVD and installing that on a test machine, then without domaining it and without installing any other software, running updates from Microsofts update site. This seems to work, althrough it does throw some errors
but I believe those are related to having to reboot your machine in order to complete the updates (I can't remember that error code at the moment).
Has anyone else been experiencing this? Any suggestions as to how I can fix this?Hi,
Error 800f0902
Please try the method in this thread:
Error
Code: 800f0902
Error 80242016
If you receive Windows Update error 80242016 while checking for updates, it might be caused by a connection interruption between your computer and the Windows Update servers.
80070005
Usually means access denied
Since it worked perfectly for a while, did you make any change on the server? Any applications new installed on clients? -
I purchased a song on my iMac on iTunes and it plays on that but won't play on my macbook even though both computers are authorized under the same iTunes account. It says that i have to authorize my macbook and sign into iTunes, but then says its already authorized. How do I fix this?
Hi stuartbonk,
Welcome to the Support Communities! Here are some steps you can try if you keep getting asked to authorize your MacBook for iTunes:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases - Apple Support
http://support.apple.com/en-us/HT203160
If you authorize your computer to play your iTunes Store purchases, but you can't play them and iTunes keeps prompting you to authorize, try these suggestions.
Authorize your purchases from an administrator account
To authorize your purchases from an administrator account, follow these steps:
Log in to the administrator account.
Note: If you don't have access to an administrator password, you'll need to contact the administrator of this computer. If this is a work computer, this may be your IT department.
Make sure you have the latest version of iTunes installed. You can download the latest version free.
Choose Store > Authorize Computer.
Enter your iTunes account name and password.
Note: If you have multiple accounts, you'll need to log in to the iTunes Store and authorize each account separately.
Quit iTunes.
After you've authorized your computer on your administrator account, you'll need to log out and log back in to the user account you'd like to play your purchases from. Once you're logged back in, simply open iTunes, select an iTunes Store purchase in your library, and click Play. The item should begin to play.Authorize using the correct account name
The items you're trying to play might have been purchased using a different iTunes Store account. To determine which account was used to purchase an item, follow these steps:
Select a purchased song in your library and choose File > Get Info.
Click the Summary tab. Note the Account Name that appears in the list. This is the account name (Apple ID) you'll need to use when authorizing your computer to play this purchase.
Note: The account name that appears is the one you used when purchasing the item and does not change if the account name (Apple ID) changes.
If you've authorized the Apple ID that is shown in the Summary tab, you can check the purchase history for that Apple ID from Store > View My Account. If your purchase history does not reflect the purchase of the items in your iTunes library, consider any other Apple ID you may have created, and authorize the computer for your additional Apple ID.
If you forgot the password to one of your accounts, you can recover it using Apple's password-recovery website.Remove the SC Info folderIf you're still unable to authorize your computer to play your purchases, you may be able to resolve your issue by removing the "SC Info" folder. To do so, follow these steps:
OS X
Quit iTunes and any other open applications until only Finder is open.
Choose Go > Go to Folder.
Type /Users/Shared/SC Info and click Go.
If Finder is not already set to column view, set it by choosing View > as Columns.
Select the SC Info folder and move it to the Trash by choosing File > Move to Trash.
Restart the computer and open iTunes.
Authorize your computer to play your purchases. Note: If you have multiple accounts you'll need to authorize your computer for each account. For more information on how to authorize your computer, see this article.
Last Modified: Dec 16, 2014
I hope this information helps ....
- Judy -
Restrict filter values that are shown in the selection screen
Hi Experts
1) Is it possible to restrict the filter values that are shown in the selection screen in BEx web? When a user are asked to enter a material number and uses the selection button in BEx web, he should only see material numbers for one specific plant. How is this done?
2) Is it possible to remove the selection button for å characteristic filter in the selection screen in BEx web? The selection button I am talking about is the button to the right of where you enter the filter value (two white papers on top of each other). If there is no solution for question 1 we have to go for question 2 solution.
We are using BI 04s, SP 09.
Kind regards
ErikHi Erik,
It seems that you would like the user to see value for 1 single plant. If the Plant Value is fixed then you can use this value in the Query and hardcode it.> in the query go to the Plant Chrac and keep a constant value of the Plant.
How ever if you need this value to be dynamic then use a variable for customer exit and populate this value using ABAP.
Regards,
Jasprit -
In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?
Yes, junker thumb drives pour like rain in the market.
Which makes are working on your Air, and which arent?
Stick to Sandisk and a couple of other reliable mfg. of memory sticks -
BI IP-Characteristic Relationship- invalid combinations are shown
Dear all,
we need to create a query ready for input but we need to avoid that the invalid combinations of two characteristic on wors are shown.
In fact the system presents the inconsistent combination as not editable.
Could you please suggest how to avoid this?
Many thanks in advance for help!
StefaniaHi
the link is ueseful, but I try to explane what we really need.
We have in the level two chars (ZC1 and ZC2; ZC2 is attribute of ZC1) and here you can see the values
ZC1 ZC2
PREVAI AI
GUASAI AI
PREVBT BT
GUASBT BT
The requiremet is that the user can plan by ZC1 and ZC2, but that he has a total row by ZC2 (not editable).
That's why I defined a structure on the rows with restrictions for ZC1 and ZC2, according to the master data relationship, and put the structure on the rows.
I defined a hierarchy for ZC1 where nodes are values of char ZC2 and I set this in the characteristic relationship for the provider. here is the hierarchy.
AI
PREVAI
GUASAI
BT
PREVBT
GUASBT
The result is that in the best option I see in the query invalid combinations such as BT PREVAI.
Any suggestion? -
movie i rented on itunes, downloaded on my pc does not show up on my mac book air. home sharing is turned on, and both computers are authorized. Help!
Nevermind - I answered my own question, which is I CAN"T READ ANY BOOKS I purchased in iBooks on my MacBook Pro. If I want to read on my mac I have to use Kindle or Nook. Which means any book I've already purchased through iBooks has to be read on my iPad. Kind of a drag because there are times when it's more convenient for me to read while I'm sitting with my Mac.
-
I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone 5. The missing movies are shown as generic movie icons in the iTunes panel and are checked to select them. But they do not show up in iPhone Videos. How do I get the original movies to show up again and transfer to the iPhone? I recently upgraded Mac OS to 10.6.8
1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
tt2 -
I downloaded the new iOS 5 ....lost most of my apps ..restored them...however the kindle books app does not allow me to open books previously purchased from Amazon...the books are shown in the archive,but will not open when placed in home...a mesage comes up to uninstalll the books from "home' and uninstall the app and reinstall...which i have done to no avail several times...any cure for this?
你可以先关机重启,试试看打不打得开。
如果打不开可以删了,重新下载或者icloud同步。
祝你好运! -
After upgrading to Yosemite and Aperture 3.6 all the library icons are shown plain. Does anyone has a hint?
If it is still slow after removing Symantec, you may need a RAM upgrade. Yosemite can run very poorly on older machines with only 4 GB RAM.
-
How can I determine what computers are home sharing??
How can I determine what computers are home sharing??
Launch iTunes on the computers you're interested in. Check in the "Advanced" menu.
If "Turn on Home Sharing" is listed as an option, the iTunes library that you have open is not Home Sharing.
If "Turn off Home Sharing ([accountname]) is listed as an option, the iTunes library that you have open is Home Sharing. -
How do I get all the songs from an album to show in the album view? Currently, if an album lists the artist plus a guest artist, those are shown separately and appear to be two different albums on my iPod. How do I get all the songs on that album together on my iPod? If the album is a collaboration wtih many artists, each sond may appear as a separate album.
I used to have this problem.
First, you need to go back on iTunes
you need to go to each of the songs that are having this problem
Click the album so all the songs drop down
Right click the songs that have this problem
Click ' Get info '
Click the tab that says " info '
The box that says ' album artist ' should probably be empty (correct me if I'm wrong)
Click it and type the artist of the entire album, NOT the songs guest artist
as such,
ARTIST
JAY-Z Feat. Justin Timberlake
ALBUM ARTIST
JAY-Z
These should be separate for each artist
If you write the same album artists for each song by that artist, all the songs should be on 1 album -
10 GB of the 30 GB of music on my computer will not sync to my Ipod. This started after I got a new PC w/ windows 7 on it. All of the music, that will not sync, is music I bought and paid for through Itunes. When I go to the Itunes store it says I have only 1 computer authorized (the one I am on). When I try to play the music that is not getting synced, it says that 5 computers are already authorized. I have tried deathorizing the computers from Itunes and Itunes store. I have also tried deauthorizing the account. I am getting the same result. I have tried DRM stripping software but all seem to need Itunes or WMP to play the music in order to be re recorded without the DRM. In my mind there must be some simple way to really get the computers deauthorized from my account and be able to play the music that I paid apple for. Does anyone have any suggestions or is this common for apple,s products to do?
In order to get those to work you will have to upgrade to Snow Leopard 10.6.8.
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard, preferably the full 10.6.8 combo updater.
Maybe you are looking for
-
Text message edit bug and price
Anyone else going nuts trying to text with this phone? For one thing with the stock keyboard it only types in portrait mode even when it should be in landscape. Then it locks up and you can't backspace! No fix yet! Its been a problem since I paid 330
-
Determining wheather the o/p type is processed sucessfully
Hi all, I am calling RSNAST00 through a program , using submit statement. I want to handle the error in the calling program,. How can I proceed for the same. I am using CALL FUNCTION 'JOB_open' submit statement calling RSNAST00 CALL FUNCTION 'JOB_CL
-
Does anyone have any idea what the cause of this could be? I discovered it while trying to email a screenplay to my agent. It took hours of trial and error to narrow it down to one "toxic" line in a 109 page script. Summary: A particular text strin
-
How a new one start learning SAP MDM
Hi All, I am the new in SAP MDM, So Pls. guide me how to I start learning SAP MDM, what is the easy reference book with example or any document that guide me step by steps. Can I install Dummy SAP MDM server at our home for learning purpose. Pls. hel
-
I've recently purchased a new iMac which was partitioned using Bootcamp by the seller who also installed a Chinese version of Windows. I find that the iSight camera is not showing in Skype and believe that he didn't install the drivers when he bootca