No condition update from the sales orders exist - VK322 Message

Hello All,
I have activated " Condition Index" & " Condition Update" flag for one of my discount condition type and then created it's condition record along with scales on three levels. The condition type which I mentioned above is set as " Value Scale" in Scale Basis for checking the document value and apply the applicable discount percentage.
I have created three sales orders wherein the discount percentage is getting applied as per my condition record ( so, the document value is getting accumulated and compared with the condition record correctly )  but when I try to check the cumulative values ( ctrl +shift + F4 ) from the condition record, I get information message " VK322" mentioned in the subject.
VK322 -
No condition update from the sales orders exist
Message no. VK322
Diagnosis
The following causes are possible:
1. There are no sales orders for the condition record that you selected.
2. Updating condition records in the sales order entry is not active.
Procedure
Concerning 1:
Check the sales orders created for the condition record that you selected.
Concerning 2:
Activate the updating for condition records in the sales order entry.
I have checked everything in SPRO for this but could not find anything which can give me a clue to resolve this problem, especially " Concerning 2" part of this message.
My requirement > To be able to see the cumulative values from condition record.
Also, in which table the accumulated values get stored?
Appreciate your expert advise on this issue.
Regards,
Hrishi
Edited by: Hrishikesh Bhalwankar on Sep 13, 2011 1:59 AM

Hello Everyone,
I would like to thank each one of you for giving valuable inputs in regard to my requirement and I would like to let you know that I am able to achieve the results as per the expectation.
I would also like to share some key things which I did ( with the help of all your expert inputs ) due to which the requirement is met:-
1. Activation of ' Condition Index, Condition Update' in V/06 for the discount condition type.
2. Maintained ' B - Value Scale' in Scale Basis for the said condition type in V/06 - my requirement was to check against a value to apply the necessary scale base percentage.
3. Activation of ' S071' info structure via OM01
4. Condition record maintenance as per the required scales.
4. Written a new routine to check the accumulated condition base value from S071 along with the current document condition base value.
5. Put this routine in ' Scale Formula' in V/06.
This is giving me the perfect results for the correct application of the discount.
Just last question - How to re-organize the S071 info structure as I tried to re-organize it with Standard Program ' RV15F001' but it is not re-organizing this info structure... Any idea on this?
Thanks a lot friends for all your advice...
Regards,
Hrishi
Edited by: Hrishikesh Bhalwankar on Oct 11, 2011 2:11 AM

Similar Messages

  • Subcontract PO from the sales order..!

    Hi SD Gurus,
    Can i create subcontract purhcase req from the sales order.
    My requirement is when i create the sales order my item/sheduline category should create a subcontract po to my sister concern company.
    Is't possible ? Kinldy help to advice & let me know what are the config setup i need to setup.
    Thanks.

    Hello,
    The PO number field you see in VA03 is usually an input which need not be an actual PO number existing in the current system.So you can have a PO number like 'test123'.The system will accept it and store it as is in the table VBAK.
    However if you create a sales order with reference to a PO number then the PO number obviously does exist in the system and can be accessed via transaction ME23n and can also be found in tables EKKO,EKPO.
    So to sum up the number you enter in the PO field may or may not be an actual PO number existing in the SAP system.it can be used as a reference for later checks a customer may do when he calls to find out the status of his sales order.
    Hope this explanation helps you.
    Regards,
    Neil.

  • How to delete a line item from the sales order

    Hi all,
    how to delete a line item from the sales order for which the production is already happened and it has been delivered. the production order status is DLV.
    Regards
    Kumar

    Hi
    U can do this in two ways one u can short close the order by entering Reason for rejection in VA02 at header level and if yr order is multiple line item order u can enter the reason for rejection in any of the line item which u don't want to deliver.
    This is called short close ( as the qty is not delivered fully).
    Thx.

  • After creating deliveries, the Bill-to and payer can be updated in the sales order.

    After creating deliveries, the Bill-to and payer can be updated in the sales order.
    Is there any standard customizing avaiable which will not allow the change of bill to party and payer in Sales order after delivery creation?

    Either via sdh0 you can set the field as non-editable or in configuration, if you set the field for BP as not modifiable in Partner Determination for Sales Order Header, then users wont be able to change the partner function in sale order.
    G. Lakshmipathi

  • Header text to be copied from the sales order to delivery

    Hi Gurus,
    I have a requirement in which  header text "Customer order text " needs to be copied from the sales order to the delivery.After copying the text we need to print on the packing slip.
    Can anyone advise me as how to copy the text from the sales order header to delivery  and then print on the packing slip.
    Thanks ,
    Smitha.

    Maintain the Text ID @ Sales Documnet Header level and add it to your Text Procedure. Also ensure you assign the access sequence to your Text ID in your procedure.
    Access Seuquence should have VBBK and the text ID number and check All Languages and use Requirement 1.
    Then in the Delivery Header Text Procudure add this text ID and assign the same access sequence as above.
    This will copy the Text ID from Sales Order to Delivery Order Header.
    You can configure the output for packing slipduring the delivery process  and in the output program read this Text ID and print it.
    Note" Copy Controls do not copy text from preceeding documents to succeeding documents. Only the Access Sequences used in the Text Procedure will do that with the help of the reuqirement assigned in the same.
    Thanks and Hope this helps.
    Sai

  • How to create planned order from the sales order for a processing item

    In the MTO sceanrio, assembly order is created directly from the sales order. I would like to create a planned order from the sales order.
    I tried the Planning strategy group 81 in the material master but it didnt work.
    Could you please let me know how to do it? Is it Schedule line config that controls whether planned order is created?
    Thanks
    Harish

    Narayana,
    Planning strategy 82 is the best & standard way of getting production order created on sale order create.
    just assign this strategy  in MRP 3 view under strategy group.
    If not then using sale order reqt type ( KMFA- Assembly with production order) & assigning this to your sale order item category is also another way to create prodcution order without using planning strategy in material master.
    Follow steps in SPRO-->Sales & dist --> basic functions >avail check &transfer of requirements> transfer reqts-->determination of reqt type using transaction
    Here you may select the item category you in sale orders & assign KMFA to your item category. this will then give option in sale order create to change reqt type to KFMA for assebly orders.
    If you need KFMA to be default assign it to Item cat/ MRP type ( PD) combo.
    Regards
    Ritesh

  • How to update the condition price in the sales order for all the items

    Hi,
    How to update the condition price for all the itmes in the sales order to carry out the new price automatically through a stand alone program, for all the orders in the billing due list table?
    Thanks,
    Balaram

    Hi,
    There is a change in the requirement.
    Scenario:
    I have created a sales order with some 4 condition types, in that 2 condition types are of class A & B and the other two is of class C. Here I need to update the condition price of class A & B only and the remaining condition types should not get update even though there is an updated price is available.
    For the above scenario, I need to write a standalone program. Do we have any function modules to update the price of the single condition in the sales order? Please tell me how we can update the sales order at item condition level.
    Thanks.
    Balaram

  • Billing Block removal not updated in the sales order change log

    Hi Gurus,
    A specific Billing Block is automatically assigned to the sales document header (VBAK-FAKSK) when the net value of the sales order is negative. This is an order related billing.
    Sometimes the Billing block is getting released automatically and the Negative Invoice is getting created in the Background job run for creating the invoices. When we check the sales order, the Billing block is not existing and the removal of the billing block is not recorded in the Change Log of the sales order.In the CDHDR table also there are no details about the release of the billing block.
    This is happening only occassionally. When I tried to replicate the issue, the system is not allowing me to create the invoice as long as the billing block is there in the sales order and if I remove the block, it is recorded in the sales order change log.
    My doubt is.,
    1. How the billing block is getting released automatically?
    2. Even if the block is released,  why it is not recorded in the Change Log of the sales order?
    Looking forward your for suggestions and solutions.
    Thanks,
    Ravi

    Hi
    Did u check in sales doc. details screen.There u can block for billing.

  • Flow of condition records in the sale order

    Dear All,
    I had created two condition types (ex : RL1 & RL2) for Royalty exp and Royalty Payable, these are Required Fields. so that whenever user create the Sale order those condition types amounts are automatically fetch into the sale Order with plant and material combination through condition record.
                                        But the requirement is user will maintain condition record for the first condition type (ex : RL1) only, at the time of creating the Sale order the second condition type(RL2)  amount should automatically  flow into the sale order along with the first condition record (RL1). i.e., what ever the amount maintained in the first condition record(RL1) should copy into the second condition type(RL2).
    Note : User will not maintain condition record for the Condition type (RL2).
                                 Other than Condition supplement, Please suggest me how to meet the Client requirement.
    Awaiting Reply,
    Thanks&Regards,
    Lakshmi

    Hi,
    First Condition Type (RL1) is a surcharge  and   Condition type (RL2) is discount.  after placing RL1 condition in RL2 condition element details screen as a Ref.Condition Type. I maintained the condition record for RL1, in the Sales order second condition Type is automatically picking with positive value(where as second condition RL2 is a discount) that should not it has to show the negative value .
    Give me suggestions to meet the requirement.
    Regards,
    Lakshmi narayana

  • How to retrieve invoice details from the sales order .. urgent..

    hi,
    i am retrieving  vbak-vbeln with this i should retreive invoice details
    how to relate vbak with abrk table
    i have vbak -vbeln,erdat,VBAK- VKORG,VBAK-KUNNR,VBAK-VTWEG,VBAK- SPART.
    its urgent..

    Hi
    U can see the sales order number in VBRP table, fields:
    VBRP-AUBEL and VBRP-AUPOS.
    But if u have the sales order number it's better to use VBFA table.
    SELECT * FROM VBFA WHERE VBELV = VBAK-VBELN
                         AND VBTYP_N = 'M'
      SELECT SINGLE * VBRK WHERE VBELN = VBFA-VBELN.
      IF SY-SUBRC = 0.
        WRITE: 'Bill number:', VBRK-VBELN.
      ENDIF.
    ENDSELECT.
    U have to make sure to use the right document type:
    M = Invoice
    N = Invoice cancellation
    So the bill type depends on the sales order type
    Max

  • Oracle std report to fetch all the backordered lines from the sales orders

    Hello Experts,
    Is there any standard Oracle report which can provide us the details of all the backordered lines in all the sales orders? Pls advise.
    Regards,
    Vidhi

    There is a report called "Backorder Detail Report" under Shipping Execution.

  • Dly Qty is Diff from the Sale order Qty

    Hi,
    Gurus
    The sale order quantity for the Material X is 100 Qty, Material Y is 99.601 Qty, Material Z is 99.601.
    While we see the same in delivery level the quantity is coming as 99.730 for Mtl X, 99.330 for Mtl Y and 99.330 for Mtl Z. Even the the quantity is confirmed for the Exact Qty in the Shedule Line in sale order.
    Guide Me Gurus
    Regards
    Anand

    Hi,
    Thank You All, Thank you all for the Coordination.
    I have checked the same for what you have all told. I identified the Material in the sales order, the item category for this material as BOM.
    I have also checked the bill of material display header overview. The Base Quantity maintained as 1000 EA3. The SUBITEM maintained in G in the unit field in bill of material display.
    Accordingly i have checked the same for material master's additionl data in Units of Measure tab, it is mentioned the basic unit as 1000 EA3 and alternative unit as 600 G.
    My client processed the order for 100 QTY. The QTY for the two sub item is 99.601 each in the sale order.
    My client Question is why in delivery the Material Qty is coming as 99.730 and the SUB ITEM is coming as 99.330 EACH.
    Note:-  The material X  is maintained in EA3 in Bill of material header overview. I do no how the sale unit came as G for the Material in sale order.
    The other two sub item is perfectly coming as G. Because it is maintained in G in the Bill of Material Display.
    Guide me GURUS.
    Thanks and Regards,
    ANAND

  • Mass update of condition type in the sales order

    Dear Experts,
    we have to do mass update of one condition type for already existing sales orders with out causing any changes to the manual conditions and also for other automatically determined conditions.
    The condition type for which we have to update in sales orders is included in the pricing procedure very recently.
    Please guide me in this regard.
    Thanks and Regards
    Yoganand Pingili

    Yoganand Pingili
    Goto T code VA05 enter your criteria for sales orders selection.
    Next screen. Select all sales order you want to change price.
    Menu>EDIT>Mass change>New Pricing>select 'C'.
    This will solve your problem
    try and revert
    Edited by: Yadav on Oct 9, 2009 8:25 AM

  • How to create an Installed base from the sales order

    Dear Friends,
    could any one let me know the process of creating an Installed base with the below process.
    Once a sales order is created in SD, an istalled base need to be created in CRM system with reference to sales order.
    There are around 50 final products and approximately 2000(BOM)components for each product exists. but the client wants to maintain only few components
    like 100 to 200 components in Installed base.
    In CRM system, can we maintain Installed base Template with that 100 or 200 components. If yes, how do we assign the Individual objects(Serial numbers) to each component.
    Regards,
    Ven

    Hi Ajay
    there can be two possibilities
    Option 1. Create Install base in CRM while creating Sales order in ECC using RFC CRM_IBASE_CREATE. Make some reference  of sales order in the Ibase. later when you move equipments to CRM then you can attach these equipments to Ibase (Already created in Thru RFC)in Badi CRM_EQUI_LOAD(This BAdi is called while moving equipments from ECC to CRM).
    Option 2. Don't create Ibase at the creation of Sales order. but while creating Equipment just add some indiacator in the equipment to know which sale sorder this equipments belongs.
    and once these equipments moves to CRM. Using the BADI CRM_EQUI_LOAD you can club all the equipments(of same sales order) under one ibase.
    Regards
    Naresh

  • Link from the Sales order/Sheduling Agreement to planned order

    Hi,
    SAP SD Gurus,
    Can you please tell me the the link from sales order/sheduling agreement to planned order.
    Thanks,
    Anand

    . I would like to know why only for this character the values is not displayed.
    Dear,
    Please check the relevant characteristic in CT04
    select the addnl data tab
    You can find the table name and field name
    and also you can find the check mark in   not ready for Input in procedure of value assignment

Maybe you are looking for