No configuration is defined for the entry BIWGMLQuery error

Error Summary
Hi,
When I use the WebDynpro compiler, it compiles and deploys without error. However, when I attempt to run the model in WebDynpro, I get the attached error message.
It is imperative that we be able to use the Flash compiler going forward, rather than WebDynpro.
See attached error message.
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   com.sap.tc.wd4vc.intapi.info.exception.WD4VCRuntimeException: No configuration is defined for the entry BIWGMLQuery
    at com.sap.tc.wd4vc.xglengine.XGLEngine.createComponentInternal(XGLEngine.java:559)
    at com.sap.tc.wd4vc.xglengine.XGLEngine.getCompInstanceFromUsage(XGLEngine.java:362)
    at com.sap.tc.wd4vc.xglengine.XGLEngine.getCompInstance(XGLEngine.java:329)
    at com.sap.tc.wd4vc.xglengine.wdp.InternalXGLEngine.getCompInstance(InternalXGLEngine.java:167)
    at com.sap.tc.wd4vc.xglengine.XGLEngineInterface.getCompInstance(XGLEngineInterface.java:165)
    ... 52 more
Thanks,
Visshwas

Here i have attached the error messages.
[http://tinypic.com/view.php?pic=2z4l6xi&s=5]
[http://tinypic.com/view.php?pic=fjjpc3&s=5]
Please help.
Regards,
Visshwas

Similar Messages

No configuration is defined for the entry BIRGMLQuery

Hi:
I´m working with VC EHP1 SP4. I have my VC Iview working ok with a BI_Query with Compile Runtime=flash but when I change the compiler runtime to Webdynpro the following error is display at runtime::
com.sap.tc.wd4vc.intapi.info.exception.WD4VCRuntimeException: No configuration is defined for the entry BIRGMLQuery
I search all over SDN and marketplace but I can´t find where I have to do the configuration for the BIRGMLQuery.
Thanks a lot for your time.
Rocío.

Needed anymore

Message no.8Z876 No time base defined for the revaluation key -Problem ABAW

Hello,
I have a problem... I have a revaluation area (04: in local currency) and a parallel revaluation area (05: in hard currency) and I have to revaluate an asset, but I couldn't with Tx ABAW. The error is :
Message no. 8Z876 No time base defined for the revaluation key
I checked the configuration and I think it's all ok. I did some tests and I could revaluate only the Area 04 (local currency). Example:
Area 04: 500000 PEN
Area 05: 0 USD.
But this is a big problem for example when I make a transfer the asset to other because the revaluation Area doesn't transfer.
Can anybody please tell me how resolve this?
Regards,
Fernando
PD: I'm so sorry for my grammatical errors, I'm spanish speaker

Hi
The error
message 8Z 876 can be shown for two basic things:
1. TBE (Time Base exposure variant) is not maintained.
   Please check if any time base is maintained for the revaluation key.
And if it have all the intervals correctly defined and the post flag
marked for the months required to calculate revalaution.
   If it is maintained please check if the last revaluation date is
filled in your revaluation areas. If the last revaluation date field is
blank, the time base must have the following entry: 31.12.XXXX-1 where
XXXX is the current fiscal year (for ABAW).
2. In the ABAW transaction itself you are trying to post values to any
of the parallel areas defined in the chart of depreciation.
   In transaction ABAW (or AB01) do not post any amount to parallel
areas. The posted values should be equal to zero.
   The values in hard currency will never be revaluated by the inflation
program. If this is the case, please enter manually only zero values as
"Amount posted" in those parallel areas.
If by some specific reasons you still plan to post (manually) to these
parallel areas, you will get error message 8z876 in accordance to your
explanation of the problem.
   To allow posting of non-zero amounts to these areas, you need to
create Revaluation Key NULO. To do this, go to the customizing system
IMG (transaction SPRO) according to the link:
IMG -> Financial Accounting -> Asset Accounting -> Special Valuation ->
        Revaluation of Fixed Assets -> Revaluation for the Balance Sheet
        -> Inflation -> Maintain Revaluation Keys
Create new entry (click F5) for key with name NULO, And save data
(Ctrl+S).
Please, adjust your customizing in accordance with the instructions
above.
Best Regards,
Blaz

The valuation area defined for the plant is not defined in table T001K.

when i creating the PO for plant ,s/m is giving the following meassage
The valuation area defined for the plant is not defined in table T001K.

Hi,
You have two options to check:
Option---1: You defined your plant ( in t.code:OX10) and if then copy from existing plant(ex. 0001 0r 1000),check the plant not assigned to company code properly .Now assign in t.code OX18 and also check the table T001K after this configuration.
Option---2: Use t-code: OMWD, check whether your new plant ( valuation area) is assigned to valuation grouping code . If not assign the same .
Now try creating PO.
Regards,
Biju K

Err in PO creation-Sales document item is not defined for the transaction

Hi,
I am getting the following error while creating PO
"Sales document item 30000183 000100 is not defined for the transaction
Message no. V1 198
Diagnosis
You have tried to carry out a business transaction for this sales and distribution document item which, for this item, is not allowed.
This may be due to the fact that this item is not part of a make-to-order production with cost management in the sales order."
I have used an item category which is copy of TAB and the sales order line item is attached to WBS element.
can any one guide me what needs to be done.
thanks

If you want the sales order creation to initiate a PO creation automatically, check if the "Create PO Automatically" button is ticked on for the item category in Transaction flow tab in tcode VOV7
This will solve your problem, provided your configuration for PO on the MM side is fine.
Reward if this helps.

Series not defined for journal entry

Hello Sir
I have defined two series namely "SCPL" and "New1"
                Start No    Last No
SCPL        10001       3000
New1         3001        30000
Now i have made "SCPL" series as default for A/R Invoices and "New1" series as default for rest of the documents like A/R Credit memo,Journal Entry etc...
Now when I try to add an A/R Invoice , it gives me error message "Series not defined for journal entry"..??    But i have defined New1 series as default for Journal Entry

Hi,
In the series defined for journal entry,set document series as default for which default journal entries will be posted automatically.
Ex.For delivey,return,invoice journal entry will be generated automatically,so if you a series like JESYS08 indicating system automated journal entry.This series should be set as default.
If you have further issue let me know.

SFLIGHT is NOT defined for the current logical database.

I have just started learning ABAP and bought an ABAP Objects book by Horst Keller. I have installed 4.6d mini sap and SAP GUI 6.4 on win XP Prof. I executed S_FLIGHT_MODEL_DATA_GENERATOR to load DB tables.
(1). When I tried to check a sample program, I get an error message SFLIGHT is not defined for the current logical database.
Here is the partial code:
REPORT zbcb01f1 .
TABLES: sflight, sbook.
DATA: BEGIN OF sr OCCURS 100,
      carrid LIKE sbook-carrid,
      connid LIKE sbook-connid,
      fldate LIKE sbook-fldate,
      bookid LIKE sbook-bookid,
      order_date LIKE sbook-order_date,
      loccuram LIKE sbook-loccuram,
      END OF sr.
GET sflight.   <---- Error is pointed here
(2). I am also not getting Graphical Screen Painter when selecting Layout for a screen. Instead, I am getting alphanumeric editor.
Someone please help me.
Raizak.

Hi Raizak,
the easiest way is to go to service.sap.com/notes and enter the note number. For this time I've copied the 2 notes below.
Best regards,
Christian
Symptom
The Graphical Layout Editor of the Screen Painter either does not start or terminates.Error message 37527 is displayed in the session in which the call was made (Graphical Layout Editor not available.
Additional key words
() EUNOTE, EUSCREENPAINTER, 37 527
Cause and prerequisites
This note comprises all the common causes for error message 37527 and provides you with information on how to systematically trouble shoot the problem.
1. Windows32 or UNIX/motif?
As of Release 4.6B there is only the program version for 32bit Windows (NT, 95, 98, 2000 ff.).Up to Release 4.6A there was also a version for UNIX/Motif.All of the more current notes (with the exception of Note 45490) refer only to the Windows version.
2. Termination at the start or during use?
The following diagnostic steps refer to the causes of the errors which prevent the Graphical Layout Editor from starting. However, there are also known error causes, which result in the program terminating when the application is being used and which also produce the 37527 error message. This affects -
Rel.4.6C/D: Termination when attempting to read texts in the logon language -> Note 375494
Crash after transferring program and dictionary fields. Termination after transferring program and dictionary fields -> Note 189245
Release 3.1I: Termination after inputting field text -> Note 113318
3. Is the SAPGUI installation correct?
The Graphical Layout Editor is automatically installed during the standard installation of the SAPGUI.If you chose a non-standard installation, then you should have explicitely selected its installation (component "Development Tools - Graphical Screen Painter").
The program executable is called gneux.exe.During the SAPGUI installation it is placed in the same directory as the SAPGUI programms (for example, front.exe) (usually C:\Program Files\SAPpc\sapgui). The following belong to the program:
- An additonal executable gnetx.exe (RFC starter program)
- the DLL eumfcdll.dll
- various eusp* data files (that is, the names all begin with eusp.)
You can check the completeness of the program installation by starting the program gneux.exe locally in the SAPGUI directory (for example, by double-clicking on the program name in the Explorer window).The Layout Editor is displayed with German texts and an empty drawing area for the pseudo screen EUSPDYND 0000.
If the installation is not complete, an error dialog box provides information regarding the cause of the error, for example, sometimes the DLL eumfcdll.dll is missing after reinstalling the SAPGUI. For example, the eumfcdll.dll DLL was sometimes missing after the SAPGUI was reinstalled.
4. System link defined and okay?
The Graphical Layout Editor is a separate program which is started by the Screen Painter Transaction (SE51) on the Frontend machine.
Up to Release 3.0F, the programs communicated with each other via the graphics log of the SAPGUIs (gmux).The definition of the environment variable SAPGRAPH may be the cause for the program not being being found where it is.
As of Release 3.1 G, the programs use a separate RFC link which is set up in addition to the SAPGUI's RFC link.Missing or incorrect definitions of the RFC destination EU_SCRP_WN32 or problems with the creation of the RFC link are the most frequent causes for error message 37527 being displayed.Below you can find the correct settings for the RFC destination EU_SCRP_WN32 (under "Solution").Note 101971 lists all the possible causes for problems with the RFC link set-up. Attention:The Graphical Layout Editor may not be operated through a firewall (for example between the SAP and the customer system) because this does not allow an additional RFC connection in addition to the SAPGUI.
Solution
ad 1 UNIX/Motif
Note 45490 describes possible errors resulting from an incorrect program installation under UNIX/Motif (up to Release 4.6A).
ad 2 Termination when using
The above-mentioned notes may contain options for solving individual problems.However, you usually have to replace the program with an corrected version.You can do this either by downloading a patch from sapservX or by installing a more current SAPGUI.The patch is mentioned in the respective note.
ad 3 Installation
You either need to reinstall the SAPGUI or manually copy the missing file into the SAPGUI directory.In both cases you should make sure beforehand that a Graphical Layout Editor is no longer running.To do this you can either remove all processes gneux.exe from the process list by using a tool such as Task Manager (on WindowsNT) or exit the Graphical Layout Editor from the Screen Painter Transaction menu via Edit -> Cancel Graphical Screen Painter). Attention:For each session or system an individial Layout Editor process may exist so that, if need be, several processes should be cancelled.
ad 4 System link
Up to Release 3.0F:you can either delete the environment variable SAPGRAPH or copy all the files of the Graphical Layout Editor into the directory which is specified by SAPGRAPH.
As of Release 3.1G:you can use Transaction SM59 to check the RFC destination EU_SCRP_WN32 (expand the TCP/IP connections, select destination EU_SCRP_WN32).If the destination is missing, then you should create it with the following settings:
- Connection type "T" (start of an external program via ...)
- Activation type "Start"
- Start on "Front-end workstation"
- Front-end workstation program "gnetx.exe" (caution! NOT gneux.exe)
- Description (optional) "Graph. Screen Painter (Windows32)
Start Program gneux.exe using the gnetx.exe starter program."
If you want to start the program from a different directory than the SAPGUI standard directory, then replace the default value under Frontend work station by the complete path name for program gnetx.exe.Transaction SM59 also allows you to check the RFC connection via the pushbutton "Test connection").In this case the system attempts to localize and start the program gnetx.exe.If there are errors, a message is displayed regarding the possible causes (for example, gateway problem, timeout problem or the like).Note 101971 provides a detailed explanation of the problems involved with an RFC connection set-up.As the Graphical Screen Painter requires a functional RFC connection as of Release 3.1G, contact the System Administrator or create an message on the topic Middleware (BC-MID-RFC) if you encounter RFC problems.
If the program gnetx.exe can be found and started, the banner dialog box with logo, release data and version number is displayed briefly.As the Layout Editor itself is not started, the error cause must be in the installation of the Layout Editor program gneux.exe if the connection test was successful.
Release 4.5A to 4.6B: Use with Releases <3.1G>.
The Graphical Layout Editor is downward-compatible as regards the system connection, that is, an RFC-based Layout Editor for example from Release 4.6C can also be used on a non-RFC-based Screen Painter, for example of Release 3.0F.However, the releases mentioned above have a program error which causes a crash due to memory violation in the start phase of the program.Note 197328 describes the solution by installation of the corrected program version.
Important: Trace file dev_euspNNN!
If none of the diagnosis steps leads to the cause of the error and to the solution of the problem via the corresponding note, then you should add the contents of the trace files dev_euspNNN (NNN = process number) to the message for SAP, if possible.You can find this file in the current directory of the SAP System, for example under Windows NT in C:\Winnt\Profiles\<user>\SAPworkdir.If several such trace files can be found there, make sure that you use the file which matches the termination time with respect to date and time of creation.In most cases the ERROR message in the last lines of this trace file provides an important note on the cause of the error.
Source code corrections
Symptom
The graphic layout editor of the Screen Painter cannot be started (RFC version).
Other terms
() EUNOTE, EUSCREENPAINTER
Reason and Prerequisites
This is generally caused by the fact that the RFC connection between the frontend graphics layout editor and the calling screen painter program at the backend cannot be set up.
Possibility 1: Route permission denied
In the trace file dev_eusp<Process Id> of the graphics layout editor you find the entry "ERROR in RFCMgr_accept: not accepted", and in the RFC trace file dev_rfc.trc you have an entry of the form "ERROR route permission denied (<Front-Id> to <BackId>,<Service>)".
If there is a firewall between frontend computer and application
server, you need to decide whether the port for the RFC of the graphical layout editor can be released here (see Solution 1 below).
In case no firewall exists between the frontend computer and the application server, in its route permission table, the SAProuter contains either no entry for the frontend computer, on which the graphics layout editor is started, or the entry says that the link is saved by a password.Since the connection is denied, the graphics editor processes exits again, and the screen painter switches to the alphanumeric layout editor.
Possibility 2: Service 'sapgw<ServiceId>' unknown
In the trace file dev_eusp<ProzessId> of the graphics layout editor you have the entry "ERROR in RFCMgr_accept: not accepted", and in the RFC trace file dev_rfc.trc you have an entry of the form "ERROR service 'sapgw<ServiceId>' unknown".
The service sapgw<ServiceId> (for example, sapgw00) is not known on one of the computers participating in the RFC communication because the corresponding entry is missing in its service file. The affected computer can be the frontend computer or the gateway computer.
Possibility 3: The system parameter gw/cpic_timeout value is too low
This system parameter determines how many seconds the gateway is waiting for the RFC connection to be set up.In case of a high network load, the default value of 20 seconds is too small with the result that the connection cannot be created on time.Here the graphics layout editor process also exits with the trace file entry "ERROR in RFCMgr_accept: not accepted".
Possibility 4: System parameter abap/no_sapgui_rfc set
The profile parameter abap/no_sapgui_rfc of the system is set (that is, it has a value not equal to space or 0).This prevents the program of the graphics layout editor from being started with RFC at the frontend.
Possibility 5: Unnecessary authorization check
The error message "No RFC authorization for user xxxxxx" is generated although the check of the RFC authorization was deactivated by profile parameter auth/rfc_authority_check (value = space or 0). The problem is caused by a program error, that ignores the value of the profile parameter let during the call of the RFC authorization check (see Note 93254). This error can occur as of Release 4.5.
Solution
ad 1) If a Firewall is installed between frontend computer and the application server, you need to decide whether the port for the RFC link of the graphical layout editor shall be released in the firewall. This is port 33nn, where nn is the 2-digit system number of the SAP application server. As of Release 3.1G, the graphical layout editor needs an RFC link for communication with the application server in addition to the already existing linkof the SAP GUIs. Such a second link is not allowed by the firewall in general because it would contradict the security concept (password protection, logging of the connection).
If no firewall exists, you should check whether the frontend computer can be added to the route permission table or whether the password option can be removed from out of the available entry.
For details refer to chapter 4.4 of the attached Note 30289.
ad 2) Include service sapgw<ServiceId> in the service file.
Refer to Note 52959 for details.
ad 3) Increase value for system parameter gw/cpic_timeout. 60 seconds should be sufficent as a timeout limit.
ad 4) Set the system parameter abap/no_sapgui_rfc to space or 0
Start the application server so that the new parameter value comes into effect.
ad 5) Import the Support Package specified in the attachment for the release in question or implement the advance correction in the source code as described in the attached correction instructions.
As a workaround, assign RFC authorizations as described in Note 93254.

Error " Data missing for the entry check while creating a new waste code

Hi all, While setting a new Waste code I get the error " Data missing for the entry check, correction:". while filling the NAM- WASTECOCAT - LER item.
This sould look for the catalog's name included in the phrase set but for some reason it doesn't find it giving me this error.
I am changing original Characteristics, phrase set, classes, and value assignment type. Just to have my own estructure with Znames for all of them.
I have also change the enviroment parameter "WAM_PHRSET_WACATLG" with the name of my phrase set.
I have checked everything several times watching for typos or looking for a missing step.
I have even tried including my new Z's characteristics in the classe and living the original SAP_EHS_1024_001_WASTE_CATALOG. (changing the enviroment parameter WAM_PHRSET_WACATLG to SAP_EHS_1024_001_WASTE_CATALOG) and it works.
I will like to change this characteristic by Z_EHS_WA_WASTE_CATALOG
Phrase set to Z_EHS_WA_WASTE_CATALOG.
enviroment parameter WAM_PHRSET_WACATLG= Z_EHS_WA_WASTE_CATALOG
After matching up the master data It should work fine but I might be missing something to get it running ok.
¿Any idea?
Regards,
Alvaro

Hello Juan Carlos, the value and class that I want to duplicate and doesn't work is for Waste Code, I have also duplicated the one you have displayed (waste pproperties) without any problem.
1.I have duplicated and changed class SAP_EHS_1024_001. to Z_EHS_WA
2. Create a copy of the 5 characteristics included in this class.
SAP_EHS_1024_001_WASTE_CATALOG
SAP_EHS_1024_001_WASTE_CODE
SAP_EHS_1024_001_WA_SUBCATEG
SAP_EHS_1024_001_WA_CATEGORY
SAP_EHS_1024_001_REMARK
change the name by
Z_EHS_WA_WASTE_CATALOG
Z_EHS_WA_WASTE_CODE
Z_EHS_WA_SUBCATEG
Z_EHS_WA_CATEGORY
Z_EHS_WA_REMARK.
I checked the funcion C14K_WASTECATLG_CHECK is in the value of the Z_EHS_WA_WASTE_CODE characteristic
I checked the funcion C14K_WASTECODE_CHECK is in the value of the Z_EHS_WA_WASTE_CATALOG characteristic
3. Create phrase sets for each new category. with same name.
4. Match up the master data.
5. Change the enviroment parameter.to Z_EHS_WA_WASTE_CATALOG
I think I have followed all the steps, but for some reason it doesn't find the catalog
The phrase for the catalog is EWC in english and LER in spanish.
Regards
Alvaro.

How to configure Fault policy for the Mediator??

Hi All,
I failed to configure fault policy for the mediator on FMW 11g. Below are my configurations.
1. I created simple ESB project: Consume message(using JMS adapter) from AQ topic: Q1 and produce to another AQ topic: Q2. In order to test the fault policy, The project will thorw an exception when produce to the AQ topic Q2 (Q2 didnt exist).
2. Created fault-policies.xml and fault-bindings.xml files in the Composite project directory.
But it didnt work, I didnt find any retry action in the log file. Is this the correct way to configure the fault policy? your suggestions are welcome. thanks.
fault-policies.xml
======================================================
<?xml version="1.0" encoding="UTF-8"?>
<faultPolicies>
<faultPolicy version="2.0.1" id="CRM_ServiceFaults">
<Conditions>
<faultName xmlns:medns="http://schemas.oracle.com/mediator/faults"
name="medns:mediatorFault">
<condition>
<test>contains($fault.mediatorErrorCode, "TYPE_FATAL_MESH")</test>
<action ref="ora-retry"/>
</condition>
</faultName>
</Conditions>
<Actions>
<Action id="ora-retry">
<retry>
<retryCount>3</retryCount>
<retryInterval>40</retryInterval>
<exponentialBackoff/>
<retryFailureAction ref="ora-terminate"/>
<retrySuccessAction ref="ora-terminate"/>
</retry>
</Action>
<Action id="ora-terminate">
<abort/>
</Action>
</Actions>
</faultPolicy>
</faultPolicies>
fault-bindings.xml
==========================================================
<?xml version="1.0" encoding="UTF-8"?>
<faultPolicyBindings version="2.0.1"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<composite faultPolicy="CRM_ServiceFaults"/>
</faultPolicyBindings>
Thanks Mingzhuang

http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10224/bp_faults.htm#SOASE9906

Problem start a BPM process, No ADF binding is defined for the service.

Hi,
I am trying to use oracle.soa.management.facade.Service.request method to start a BPM process.
The service works fine while being tested using Enterprise Manager. But while I am trying to invoke the service from a java client, exception occurs.
The Service toString:
Service {
name = TechDocModifyProcess.service
properties = {}
bindings = [Binding {
Name = WSBinding
Type = ws
Mode = entryPoint
Properties = null
WSDL URL = /TechDocModifyProcess.wsdl
WSDL URL = http://eis-bpm-server.eis.smec-cn.com:8001/soa-infra/services/default/TechDocModifyProject!0.2*soa_fee2a899-b630-4c7c-8bbb-c740d37a1b03/TechDocModifyProcess.service?WSDL
Below is the java code I used to call the service.
try {
NormalizedMessage input = new NormalizedMessageImpl();
String uuid = "uuid:" + UUID.randomUUID();
input.addProperty(NormalizedMessage.PROPERTY_CONVERSATION_ID,
uuid);
// payload is the partname of the process operation
input.getPayload().put("creator", "jcooper");
input.getPayload().put("notificationId", 1L);
input.getPayload().put("title", "test");
// process is the operation of the employee service
NormalizedMessage res = null;
try {
svc.post("operation", input);
} catch (Exception e) {
e.printStackTrace();
} catch (ProcessMetadataServiceException e) {
e.printStackTrace();
} catch (Exception e) {
e.printStackTrace();
Below is the exception stack trace:
oracle.fabric.common.FabricInvocationException: java.rmi.RemoteException: EJB Exception: ; nested exception is:
     java.lang.RuntimeException: No ADF binding is defined for the service.!
     at oracle.soa.management.internal.facade.ServiceImpl.post(ServiceImpl.java:178)
     at com.smec.eis.bpm.api.SOASvcProvider.main(SOASvcProvider.java:84)
Caused by: java.rmi.RemoteException: EJB Exception: ; nested exception is:
     java.lang.RuntimeException: No ADF binding is defined for the service.!
     at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
     at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:223)
     at oracle.soa.management.internal.ejb.impl.FacadeFinderBean_4vacyo_FacadeFinderBeanImpl_1035_WLStub.executeServiceMethod(Unknown Source)
     at oracle.soa.management.internal.ejb.EJBLocatorImpl.executeServiceMethod(EJBLocatorImpl.java:837)
     at oracle.soa.management.internal.facade.ServiceImpl.post(ServiceImpl.java:174)
     ... 1 more
Caused by: java.lang.RuntimeException: No ADF binding is defined for the service.!
     at oracle.soa.management.internal.ejb.impl.FacadeFinderBeanImpl.executeServiceMethod(FacadeFinderBeanImpl.java:982)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:104)
     at oracle.security.jps.ee.ejb.JpsAbsInterceptor$1.run(JpsAbsInterceptor.java:94)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.ejb.JpsAbsInterceptor.runJaasMode(JpsAbsInterceptor.java:81)
     at oracle.security.jps.ee.ejb.JpsAbsInterceptor.intercept(JpsAbsInterceptor.java:112)
     at oracle.security.jps.ee.ejb.JpsInterceptor.intercept(JpsInterceptor.java:105)
     at sun.reflect.GeneratedMethodAccessor2129.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.jee.intercept.JeeInterceptorInterceptor.invoke(JeeInterceptorInterceptor.java:69)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
     at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
     at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy411.executeServiceMethod(Unknown Source)
     at oracle.soa.management.internal.ejb.impl.FacadeFinderBean_4vacyo_FacadeFinderBeanImpl.__WL_invoke(Unknown Source)
     at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
     at oracle.soa.management.internal.ejb.impl.FacadeFinderBean_4vacyo_FacadeFinderBeanImpl.executeServiceMethod(Unknown Source)
     at oracle.soa.management.internal.ejb.impl.FacadeFinderBean_4vacyo_FacadeFinderBeanImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:668)
     at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

fusion order demo to the rescue ..
specify binding.adf within the <service> in composite.xml and you are good to go ..

Problem Instanciating BO - No default attribute defined for the object type

Hello Experts,
I am instanciating the BO BUS2038 to ZBUS2038 and when I click in u201Cto implementedu201D and follow u201Cto releasedu201D the message No default attribute defined for the object type is appearing!
Can anybody help, please?

Hello everyone,
it appears to me, that no one has a clue about the "default attribute" and is widely guessing what can be done about that.
I feel deeply sorry for that, Marcos.
At first: You don't really need to care about the missing default attribute. If it's missing, the object's instance key will be used instead. Skip the warning message.
Secondly: The default attribute is used to display the instance within the "Object links & Attachments" under the work item preview when using the SAP Business Workflow.
Thirdly: You can select any existing attribute of your business object type to be the default attribute, by navigating to the "Basic data" (it's the heat-icon within the object builder), use tab "Defaults" and use the Input Help on the field "Attribute".
There you'll go.
Best wishes,
Florin

Getting error log 'Customer' needs to be defined for the PA segment'

Hi guru,
i am posting automatic payment transaction (F110) ,but i am getting in display log that
I am unable to do the posting?
can somebody let me know any reason for this?
04/09/2010 12:57:54 Job started                                                                        00           516          S
04/09/2010 12:57:54 Step 001 started (program SAPF110S, variant &0000000089657, user ID X1SRAVKU)      00           550          S
04/09/2010 12:57:54 Log for payment run for payment on 01/22/2010, identification EIN5                 FZ           401          S
04/09/2010 12:57:54 'Customer' needs to be defined for the PA segment                                       ZF           019          S
04/09/2010 12:57:54 Information re. customer 1002215 / paying company code WG ...                     FZ           306          S
04/09/2010 12:57:54 ... payment not possible because of reported error                                 FZ           311          S
04/09/2010 12:57:54 End of log                                                                         FZ           398          S
04/09/2010 12:57:55 Job finished                                                                       00           517          S

We have user defined PA characteristics. If there is new characteristic we update the custom lists through KES1.
Lack of a match in this table, leads either to no description or the error you are describing.
good luck

"PERNR" is not defined for the current logical database.

Hi Experts,
I have developed a program for HR salary variance but when i execute i getting error in the line " get PERNR"
the "PERNR" is not defined for the current logical database. so plz suggest me to avoid this issue.
Thanks,
Rajesh

the codes are has below,
*& Report ZHRSAL_COMP
REPORT ZHRSAL_COMP.
tables: pernr,
        t512t.                      "Wage type texts
infotypes: 0001. "Organizational Assignment
*Tables data containing directory to PCL2 payroll results file.
data: begin of rgdir occurs 100.
        include structure pc261.
data: end of rgdir.
data: result type pay99_result.
data: rt_header type line of hrpay99_rt.
data: country like t001p-molga,
      number like pc261-seqnr. "Number of last payroll result
types :begin of struc_p0001,
       pernr type p0001-pernr,
       ename type p0001-ename,
       werks type p0001-werks,
       btrtl type p0001-btrtl,
end of struc_p0001.
data : gtab_p0001 type table of struc_p0001,
       gwa_p0001 type struc_p0001.
types : begin of struc_payroll,
        text(10) type c,
        date     type dats,
        month(2) type c,
        year(4) type c,
        abkrs(2) type c,
        end of struc_payroll.
data : gtab_payroll type table of struc_payroll,
       gwa_payroll type struc_payroll.
types : begin of struc_result,
       lgart type lgart,
       lgtxt type t512t-lgtxt,
       betrg type betrg,
        end of struc_result.
data : gtab_result type table of struc_result,
      gwa_result type struc_result.
get pernr.
rp_provide_from_last p0001 space pn-begda pn-endda.
call function 'CU_READ_RGDIR'
    exporting
      pernr          = p0001-pernr
    importing
      molga           = country
    tables
      in_rgdir        = rgdir
    exceptions
      no_record_found = 1
      others          = 2.
if sy-subrc = 1.
    write: / 'No records found for '(001), pernr-pernr.
endif.
call function 'CD_READ_LAST'
    exporting
      begin_date      = pn-begda
      end_date        = SY-DATUM
    importing
      out_seqnr       = number
    tables
      rgdir           = rgdir
    exceptions
      no_record_found = 1
      others          = 2.
if sy-subrc = 1.
    write: / 'No payroll result found for'(002), pn-paper.
else.
    call function 'PYXX_READ_PAYROLL_RESULT'
         exporting
              clusterid                    = 'RX'
              employeenumber               = p0001-pernr
              sequencenumber               = number
        READ_ONLY_BUFFER             = ' '
        READ_ONLY_INTERNATIONAL      = ' '
        CHECK_READ_AUTHORITY         = 'X'
   IMPORTING
        VERSION_NUMBER_PAYVN         =
        VERSION_NUMBER_PCL2          =
         changing
              payroll_result               = result
         exceptions
              illegal_isocode_or_clusterid = 1
              error_generating_import      = 2
              import_mismatch_error        = 3
              subpool_dir_full             = 4
              no_read_authority            = 5
              no_record_found = 6
              versions_do_not_match        = 7
              others                   = 8.
    if sy-subrc = 0.
      perform print_rx.
    else.
      write: / 'Result could not be read (003)'.
    endif.
endif.
      FORM PRINT_RX                                        *
      Print Payroll Result                                 *
form print_rx.
format intensified on.
write: / p0001-pernr,
           p0001-ename(15),
           p0001-werks,
           p0001-btrtl.
format intensified off.
skip 1.
move p0001-pernr to gwa_p0001-pernr.
move p0001-ename(15) to gwa_p0001-ename.
move p0001-werks to gwa_p0001-werks.
move p0001-btrtl to gwa_p0001-btrtl.
append gwa_p0001 to gtab_p0001.
write: / 'For period/payroll area: '(004),
           30 result-inter-versc-fpper+4(2),
           result-inter-versc-fpper+0(4),
           result-inter-versc-abkrs,
           / 'In-period/payroll area: '(005),
           30 result-inter-versc-inper+4(2),
           result-inter-versc-inper+0(4),
           result-inter-versc-iabkrs.
skip 1.
gwa_payroll-text = 'For'.
move result-inter-versc-fpper to gwa_payroll-date.
move result-inter-versc-fpper+4(2) to gwa_payroll-month.
move result-inter-versc-fpper+0(4) to gwa_payroll-year.
move result-inter-versc-abkrs to gwa_payroll-abkrs.
append gwa_payroll to gtab_payroll.
gwa_payroll-text = 'In'.
move result-inter-versc-fpper to gwa_payroll-date.
move result-inter-versc-inper+4(2) to gwa_payroll-month.
move result-inter-versc-inper+0(4) to gwa_payroll-year.
move result-inter-versc-iabkrs to gwa_payroll-abkrs.
append gwa_payroll to gtab_payroll.
write: 'Results table: '(006).
skip 1.
loop at result-inter-rt into rt_header.
    perform re512t using result-inter-versc-molga
                         rt_header-lgart.
    write: / rt_header-lgart,
             t512t-lgtxt,
             rt_header-betrg currency rt_header-amt_curr.
move rt_header-lgart to gwa_result-lgart.
move t512t-lgtxt to gwa_result-lgtxt.
move rt_header-betrg to gwa_result-betrg.
append gwa_result to gtab_result.
endloop.
endform.                    "print_rx
      FORM RE512T                                          *
      Read Wage Type Texts
form re512t using value(country_grouping)
                  value(wtype).
check t512t-sprsl ne sy-langu
     or t512t-molga ne country_grouping
     or t512t-lgart ne wtype.
select single * from t512t
              where sprsl eq sy-langu
              and   molga eq country_grouping
              and   lgart eq wtype.
if sy-subrc ne 0.
    clear t512t.
endif.
endform.                                                    "re512t

Warning: "No terminating events defined for the task used"

Dear all,
I created a task with ABAP class and method as its object method. This task is a background task. The ABAP class inherits the IF_WORKFLOW interface but doesn't implement any method of the interface.
When I try to confirm the task settings in transaction SWDD, a message shows up "No terminating events defined for the task used" and I cannot continue the work. Does anybody have any idea what I should do?
Thanks + Best Regards
Jerome

Hi Jerome,
If you set a background task in your workflow, and if it is asynchronous, then you need some way to tell the template if it is finished and what happened. In this case you set terminating events - that is events which are published in the system as a result of your method (ie document.posted etc).
Either use a synchronous method for your task or set appropriate terminating events in your task setup.
Regards
Gareth

Sequence No. not defined for the location [Message 80072-11]

Dear Friends,
I have setup sequence for A/R Invoice, Incoming / Outgoing Payment and Excise Register, and created a few document successfully (with sequence number). But when I go to u201CTax Payment wizardu201D, in the 2nd stage on selection of any location give the following error and even the u201CSeq. Nameu201D does not show any sequence name.
u201CSequence No. not defined for the location [Message 80072-11]u201D
Can any one please tell me the reason behind for SAP B1 2007B SP0 PL7?

Hi Narottam,
Check this link
Sequence Series
Regards
Jambulingam.P

No configuration is defined for the entry BIWGMLQuery error

Similar Messages

Maybe you are looking for