No confirmation for shift-deleting messages in saved searches

I have noticed that there is no confirmation for Shift-deleting messages in saved searches, only in regular mail folders. This is rather dangerous.
I have checked my config editor, and I have have "mail.warn_on_shift_delete" = true, but this seems to apply only to regular mail folders (where I do get the confirmation diaog), not "virtual" ones like saved searches.
This seems like a bug - at least in my usage of virtual folders they are as real as regular folders, and I would like to have the same level of protection against mistakes there.

I figured it out.  I had to go to m.google.com/sync in the browser and change a delete setting there.  Don't know how it got switched though.

Similar Messages

  • How to Delete Messages in Spotlight Search History without Resetting or Syncing!!

    I know there are a lot of individuals dealing with this issue and if you are like me you spend hours searching "how to delete messages in spotlight search history" and it seems like every post either says to reset your phone or sync it! I'm sorry but I did not want to go through the hassle of resetting my phone but I did try to sync it which did nothing so I decided to just mess around with my settings and I believe to have found the answer to everyone's question!!
    This worked for me so I really hope this works for you! Just follow the steps below:
    1. Go to <settings><general><spotlight search><uncheck messages>
    2. Then turn your phone off and wait a minute! Turn your phone back on and off again 2 or 3 more times while waiting a minute in between turning it off!
    3. After you are done doing that go back to step 1 and <check messages>!
    4. Now go to your spotlight search and those messages should be deleted! If they are deleted I would recommend going back to step 1 and <uncheck messages> so you do not have the same problem with messages showing up again in the spotlight search!
    It works for Mail too! Just follow the same steps listed above but uncheck mail instead of messages or do both at the same time!!
    *Here is an extra tip which will remove deleted Mail Messages, just follow the steps below:
    1. Go to <settings><mail, contacts, calendars><your mail account> scroll down and click <advanced> Now click <remove> under the title Deleted Messages and you can choose to have your mail removed After One Day, After One Week, After One Month or Never.
    I hope this post was detailed enough and easy to understand!
    I really hope it works for you like it did for me!
    Good Luck!!!

    I tried this fix and it does not work.
    I have read that this is a problem for a long time - years. Me, personally, I do have emails and texts from the past that are private and were deleted, that I do not want my husband or daughter to read. Many people have this complaint and have had it a long time. Why does Apple not fix it?!?
    Another privacy issue is the iMessage default settings on new devices. We bought a new iPhone for my college-age daughter and received all of her text messages until we noticed it and told her. We did a temporary fix. Then I got a new iPhone and the same thing happened. I had to set up iCloud accts. for each of us so that we each have privacy that cannot be tampered with. We still share our original iTunes account. Why did that have to happen?!? 
    We have been Apple consumers (laptops, iPads, iPods, iPhones) for over ten years (? longer w/just desk top) w/ the same account. These breaches in privacy are upsetting!!  My point here is that these breaches are unacceptable!  The spotlight search issue appears to be unresolved.  FIX THIS APPLE! 

  • How to Make Sent and Deleted Messages Get Saved in the Folders of My Choice

    On my iPhone, under Mailbox Behaviours, I can select specific mailboxes on the server where the Sent, Deleted and Draft messages will be saved. However, I could not find this feature in Mac OS 10.6.2's Mail application; instead, these mails are saved in default folders created by the program. How could I change this behaviour so that these e-mails are saved on the server, in the folders of my choice? Thanks.

    you can do it in in Mail too if your account is IMAP. select a mailbox you want to use for Sent in the IMAP section of your account in the lower section of the sidebar. then go to mailbox menu->use this mailbox for->sent.

  • How to disable confirm dialog when deleting messag...

    It is really annoying that each time I delete a message, I have to confirm. How can I disable that on the Lumia 920?
    Also, I spend a long time trying to figure out why my phone did not come with Nokia Music in denmak, after alomost 1 hour searching on the net, I found out that the service do not exist in Denmark... Why not just have the Nokia Music in the App store and just show a message when people try to install it, saying that its not availble in the user's country?

    You can't dsable the confirmation, but you can reduce the number of times you need to confirm to just once by marking the messages you wish to delete first. Shortcut for marking messages is to tap the left hand edge of the message you with to mark.  

  • IMAP Deleted Messages AND Unread Messages

    I've read quite a few threads about two seemingly persistent problems using Mail and IMAP servers: a) Messages deleted within Mail "reappear" in the client's in-box, and b) messages read (and marked as read -- no blue dot) "reappear" as unread messages (this latter problem occurs for me, even if moved to a folder on my IMAP account). I have to admit that I've gotten lost in the twists and turns of these discussions and I'm reluctant to start trying things that may make matters worse.
    I've tried to extract the right things to do here -- and, so far, only have checked that I am indeed saving deleted messages on the server.
    May I ask: In summary terms, are there a few standard fixes for making deleted messages go away and read messages stay that way? Thanks!!
    PB 12"   Mac OS X (10.4.7)  

    I'm using Mail 2.1 (752/752.2) talking to a Cyrus IMAP server running on the same machine. Messages are kept on the server. I have a GnuPG mail plugin. Ever since the last update of Mail I've had the problem of random "read" messages returning to the "unread" state, and not just in INBOX, but in other folders, all on the server. I've read them, did "Synchronize" and they soon show up as "unread" again. I've read them, quit Mail, restarted Mail, and they are "unread" again. Sounds like what other people are seeing.
    So I wrote a program that talks directly to the IMAP server to see what it thinks about the "read" status. Sure enough, messages that have a sitcky "unread" state do not have the IMAP "\Seen" flag set. In other words Mail is not setting this flag for some reason. (I've check this several times, before and after Mail is supposed to mark a message "read," after quiting Mail, etc., and the "\Seen" flag is never set.)
    If I use my prober program to manually set the "\Seen" flag on a message, then it stays "read." That message never again pops to the the "unread" state; however, random new messages get stuck in the "unread" state. So far the only way I have been able to mark these sticky messages as "read" is to talk directly to the IMAP server.
    I believe this strongly indicates the problem lies in Mail itself and not the IMAP server. I believe there was some regression with this new version of Mail because I've never had the problem before. To conclusively prove Mail is at fault, though, I would have to eavesdrop on the communication between Mail and IMAP.
    --Mike Zuhl

  • "Command-i" which was so useful in being able to selectively delete messages from the servers no longer works. Is their a replacement? Will it be fixed? Or should I change my mail application?

    "Command-i" which was so useful for selectively deleting messages from servers has disappeared in  Maverick. I wonder if it has been replaced by something else or should I look into other mail applications.

    Hmmm.  Which Mail program are you referring to?
    in Mac Mail command -i used to bring up the Account info pane on the server  (10.8.5)
    Now it seems you have to use the gear at the bottom in "Mail Activity" to get the drop down (10.9) :

  • Mail Adapter Problem --- Unable to save deleted messages

    Hi All,
    I'm using a sender mail adapter.
    The XI adapter is polling the mailbox properly.
    I have choosen the option <b>Delete Messages Once Read</b> and I have also mentioned a folder for the deleted messages.
    But the messages after processing are deleted from the inbox and not being moved into the folder i specified for <b>deleted</b> messages.
    Request you ppl to help me out!!
    Cheers!!
    Sidharth

    Sidharth,
    Where have you created the folder?
    ---Satish

  • Deleting messages on iPhone won't delete on .Mac

    I have an issue where if I delete an email on my iPhone and then log in to .Mac mail, I still see the message there. Further inspection shows that the message is in the .Mac trash AND in the inbox - almost like the message was copied rather than moved. Not sure how to get the sync to finally take effect. I think if I check mail via mail.app it will force the sync. Also, if I delete one of the many messages in the .mac inbox, it will suddenly delete all the messages that should have already been deleted.
    Anybody else see this? I have a buddy who is also able to reproduce this "bug".

    Make sure the settings in your iphone and on your computer match for where deleted messages go. On the iphone, go to settings>mail>yourdotmacaccount, tap advanced, and it should show you that deleted messages are being put in "Deleted Messages". On your mac, if you don't have a mailbox that says "Deleted Messages" you're fine, because that means that you've told it (or it automatically chose it) that the mailbox "Deleted Messages" is your Trash. On the computer it shows just "Trash" for whatever mailbox is chosen for deleted messages.

  • Deleted messages from in box and sent box do not appear in trash

    For years deleted messages from my in box and sent box appeared in the trash where I would hold them for a week or two just in case I had to retrieve a message I had deleted. About 6 months ago deleted messages stopped showing up in the trash. What do I do to get deleted messages to once again appear in the trash? I'm no computer geek... please be gentle with any suggestions. Thank You.
    Ron Mabey

    While trying to find a solution, I am discovering my mail problem is much deeper than just messages not appearing in the "Sent" mailbox.  I have found some of them appearing in the "Trash" mailbox and some appearing there mulitple times, often with my account name in the "TO" field.  I'm also finding some unread mail there that should be in the "Junk" mailbox.  So it would appear there are many problems with ISO 7 and mail.  I have tried deleting and restablishing the account and two complete iPhone restores.  Neither helped. What is the biggest puzzle is that on my second iPhone, the one that upgraded without an error, mail is working perfectly well.  Has anyone found a solution to any mail problems on ISO 7 devices?  If so, please reply.  

  • Delete messages older than a date except personal folder

    Hello everyone,
    I have been spending a lot of time searching and testing how to delete all items older than 6 months in a user mailbox, but this rule it cannot be applied just one personal folder named "personal". I have been reading about retention policy and
    retention policy tags, but I can't figure out how to use that to keep all items older than 6 month in personal folder.
    could anyone tell me if I am right with retention policy or it's better other way?
    thank you in advice

    Hi,
    In Outlook client, we can set AutoArchive for all folders to delete all items older than 6 months except for “Personal” folder one by one.
    If you want to use retention policy in Exchange side, we can use retention tags and retention policies to have a try. there are three types of retention tags:
    Default policy tag (DPT), Retention policy tag (RPT), Personal tag.
    For your scenario, we can create a personal tag applied for this Personal folder. For example,
    delete messages older than 3 years for this personal folder. Then apply this personal tag for Personal folder in Outlook. And the Personal folder items are all tagged. After that, we can
    applying default policy tags (DPTs) to mailboxes to manage the retention of all untagged items.
    Personal suggestion, since the delete action is only used for one specific mailbox, I suggest we can use AutoArchive in Outlook side to achieve it.
    Regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Winnie Liang
    TechNet Community Support
    Hi Winnie Liang,
    Thank you for answer. I would like to do all tasks from exchange side, so I know how to apply a retention policy to a mailbox for deleting all older than 6 months. But how can I apply the personal policy tag to a personal folder's users?
    All involved users in this requirement are warned that they must let all personal messages in "personal" folder named "personal".
    regards

  • Delete messages over 400 days

    I have Thunderbird set to delete all messages older than 400 days. Thunderbird deletes them, but does not send the delete stubs to Google. Next sync, they are re-downloaded from Google. The cycle goes on and on until I manually delete them from Google.

    I'm assuming you have an IMAP mail account.
    Here is a link to info on deleting in IMAP mail accounts:
    http://kb.mozillazine.org/Deleting_messages_in_IMAP_accounts
    IMap deleting is different from Pop mail account deleting.
    ''It is perfectly appropriate for a deleted message in a IMAP account to be visible in webmail or other email clients. Deleting a message just sets a flag, and it's up to the GUI what it should do when there is a message with that flag set. However, once Thunderbird compacts (expunges) that folder, the deleted message shouldn't be visible any more from webmail or any email client because it has been physically deleted. ''
    Read section : Misc
    ''Tools -> Account Settings -> Server Settings -> Clean up ("Expunge") Inbox on Exit will compact the Inbox folder when you exit Thunderbird. If you check "Empty Trash on Exit" it will also empty and compact the Trash folder when you exit. ''

  • Error in saving search result in MDS application

    Hi All
    I'm developing a ADF customizable web appicatoion using jdeveloper 11.1.2.0
    It works fine when I deploy this application to metadata repository, but when I Save a search result in search panel it gives following error "You do not have permission to replace this search"
    This is my configuration in ADF-Config file
    <persistence-config>
    <metadata-namespaces>
    <namespace metadata-store-usage="MAR_TargetRepos" path="/pages"/>
    </metadata-namespaces>
    <metadata-store-usages>
    <metadata-store-usage default-cust-store="true" deploy-target="true" id="MAR_TargetRepos">
    <metadata-store class-name="oracle.mds.persistence.stores.db.DBMetadataStore">
    <property value="mds-csd" name="repository-name"/>
    <property value="jdbc/mds/csd" name="jndi-datasource"/>
    <property value="owsm" name="partition-name"/>
    </metadata-store>
    </metadata-store-usage>
    </metadata-store-usages>
    </persistence-config>
    Please help me to resolve this error

    Hi,
    you are trying to change a system search, which is not allowed for customization. You can save custom searches in MDS but not override system searches
    +"Query component now support the overriding the saved search functionality. When user click on the "Save..." button, "Create Saved Search" dialog comes up with name field populated with the currently selected saved search. If user enters a "System Search" name and click OK button, a error dialog stating "You do not have permission to replace this search:" is shown. If user enters an already existing saved search name then a warning dialog stating "Replace existing search:" is shown. On clicking OK existing search is replaced with the new definition. If a name that is not already present in the saved-search list is provided, a new search with the given name is created. For this a new event QueryOperationEvent.Operation.OVERRIDE is added.+
    +Query component now allows the deletion of saved-search which is currently active search in the query-panel. When user deletes currently active saved-search, we set the first search from system-search list as the currently active search, and refresh the query-panel when "Personalized Saved Search" dialog is closed. "+
    http://jdevadf.oracle.com/adf-richclient-demo/docs/release-notes.html
    Frank

  • Saved search pop-up

    Hi All,
    I am looking for Information about this parameter saved search pop-up and how to set it up in SAP CRM.
    Which Value should I give there and how should it be used?
    I used the Search but do not find any thing about that.
    Best regards
    Yoro

    Hi Yoro,
    I could see the below settings maintained in one of the standard profile definition.
    So try entering the business role in which you need the saved searches to be displayed as a pop-up window rather than taking you to the search page. I guess you can also restrict this to specific business transactions using the ui_object type. Please give it a try and confirm us whether it worked.
    Regards,
    Siraj

  • Saved Search Not working in WEB UI

    Hi,
    When I am  creating a saved search for opportunity and run it.  The results are activities, not opportunity. But it is perfectly working for other saved search (like accounts, etc). Please help me in finding the reason behind this.
    Thanks.

    Hi Stefen,
    Thank you for the reply. There was misunderstanding in understanding the actual issue.
    User faces the issue as follows:
    "When they try to save a search for visit report, and run it later, they get the action items, not the visit report".
    Please note visit report is kind of Activity. Also we havnt implement any badi for saved search. Even I doubt whether this is a standard functionality for activity/visit report, when saved search runs to display the action items.
    Please help me on this.
    Thanks.

  • TS2755 How to I delete messages(Saved) so that I can create enough space for my update?

    How to I delete messages(Saved) so that I can create enough space for my update?

    If by "update" you mean you are trying to update iOS, then the way to do this is to use iTunes on your computer to perform the update.
    Plug your iPhone into (the current version of) iTunes on your computer.  Let it sync.  Then do "Check for Updates" from the iPhone's summary page in iTunes.

Maybe you are looking for

  • APEX Listener and EPG - strange behaviour

    Hi For some years, I've used EPG for APEX but have struggled with performance particularly as I can have up to 150 student developers using at any one time. I do a fair amount of work using ORDImage and have successfully developed APEX applications t

  • How do I manage multiple devices on the iCloud

    How do I manage multiple devices on the icloud.  We have 2 ipods, 2 iphones, ipad and a mac and right now the icloud thinks my son has my phone.

  • Need Drivers for Essbase 9.3

    Hi there, I need to install essbase on Windows server 2003 however we don't have excel installed on our windows server. when i try to install essbase client only essbase runtime client and essbase API got installed and it was not able to connect to r

  • Not given credit for subscription with skype to go...

    hi, my skype to go number had expired,by mistake,I renewed,buying only 120 minutes to call the country of my subscription,I let that expired,and bought the unlimited minutes to that same country,which is supposed to have the skype to go number...that

  • Employee Status

    Dear Consultants, My client wants to make an employee entitled for Leaves only after his confirmation. I have created the Customer Specific Employee statuses as Trainee, On Probation, Confirmed etc. I have alse changed in PM > PA > Customizing user i