No "connect to audio device" option for E71

I've been trying to connect my nokia BH-102 headset to my E71, but when I go to the Paired Devices tab and press the option button, the "connect to audio device" option is not there. The only three options that appear are "new paired device", "help", and "exit." I've searched for soltions for this online, but thus have not come across any mention of this problem. Am I missing a firmware update of some kind or is this an entirely unique problem?

Solved my question. Somehow 20 minutes of searching the forums didn't turn up the solution but when I posted my question the box on the right had 3 posts with a similar question and solution. Sorry this has become a repeat post.
I would delete it but can't.
Here is a link to the solution that worked for me. I used ONYX.
https://discussions.apple.com/message/9760772#9760772

Similar Messages

"CONnECTION TO AUDIO DEVICE FAILED"

Does anyone know how to stop the error message from popping up, "CONNECTION TO AUDIO DEVICE FAILED" ?

Hey GerryGoertzen,
Welcome to the BlackBerry® Support Community Forums.
Thank you for your inquiry, this would be caused by a paired Bluetooth device. Go into Manage Connections > Networks and Connections> Bluetooth > Here you can see your Paired Devices, delete any you are not using.
Cheers.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

'Connection to Audio Device failed' - constant Bluetooth message

I have a Blackberry Torch and keep getting the above message, despite there only being 3 paired devices, each of which works fine when on. The message repeats every 3-5 seconds whenever I'm in the house, but no other device can be found on search.
Any ideas?

Hey Occam1,
To better assist you with this issue, what types of Bluetooth® audio devices are you connected to? This message appears when you are out of range of the Bluetooth® device, you may want to disable your Bluetooth® when you are in your house this would stop the prompts from Bluetooth®.
Thanks.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Macbook pro - no audio - no option for internal speakers in sound prefs.

No audio will play from my 2011 macbook pro. It is fully updated. In sound preferences, there is no 'internal speakers' option to select in output, and no 'internal microphone' in input. No red light in headphone jack. Any solutions?

1. Reset PRAM. http://support.apple.com/kb/PH4405
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
3. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so uncheck it.
    Option click the speaker icon, if present and select Internal Speakers.
4. Launch iTunes and play a song through headphone and adjust the volume

AE CS3 crashes when setting audio format options for MP3

I've just submitted a bug report, but I wanted to see if anyone experienced this or have any suggestion.
Basically, when I add an MP3 audio to a comp, and trying to make a movie (exporting it as uncompressed QT), when I press the Format Options button under the audio options output, AE will crash.
Here are the steps.
1. Add an MP3 file to the project.
2. Create a comp with only the MP3 file in it. You can also create other objects/elements in the comp as long as there's an MP3 audio file.
3. Add the comp to the render queue (aka Make Movie)
4. Under the Output Module settings, select "QuickTime video" for output. The "Format Options" for the QT movie is not important at this point, but you can select uncompressed animation.
5. Check "Audio Output". Click the "Format Options" button under the Audio Output.
6. After Effects CS3 will vanish from the screen without saying "Hi, how are you!"
WinXP SP3 32bit / 4G
After Effects CS3 8.0.2.27 dva:2.0.0.127845
Anyone getting this and knows why is this happening? Tried different MP3 files with the same results.
Thanks

Thanks for reporting this. Adding repro steps is always very valuable (though I suspect that step 5 is all it takes!)
I think the nature of the source MP3 file(s) is probably irrelevant, since (if I understand correctly) the crash occurs when pressing the Audio Format Options button in the Output Module, not when previewing or rendering.
There was a similar report from another user. It looks like a problem with Quicktime on Windows, or at leasr some flavors of Windows.
Of course no combination of settings should make the application crash, but the odd thing that also struck me in the earlier report is... that by specifying MP3 for audio encoding on an Lossless (ie, Animation-encoded) Quicktime file, you're saving about 0.05 per cent in the overall file size/data rate To put it in perspective, you're making the audio go from 175 Kbytes per second to 30 Kbytes/s, on a file that easily can have a data rate of 20 Megabytes per second!

Hard problem with audio device installing for Lenovo G430 t6600

Dear all,
as I read about this problem from many messages in this forum, I have the same problem when install audio device for Lenovo G430. I want to write this message and hope that someone can help and show me the detail way to fix this problem and this is also to help others customers of Lenovo.
Sure that I did all the ways that messages in this forum showed to fix:
First, I downloaded hotfix - patch and Conexant Smart audio drive files which suitable with my model-type of laptop (G430, use win XP SP2), these files I downloaded from Lenovo website.
Then I uninstall all audio devices from my Laptop
install Hotfix first, and then, I install Conexant Smart audio
But, in the end I received the message: could not find the media device...blap blap and of course, my laptop keep...have no any sound
If Lenovo G430 support for Win Vistra, why my Laptop had a normal situation (all drives were installed, and the sound was good) when I bought it and the laptop run Win XP SP2. I had this problem when I re-install sound drive from the drive disk the supplier deliver to me, after this, my laptop have no sound any more!!.
So, please, if someone (and maybe the supporter-computer technician from Lenovo) can help me and other customers(who have this problem) to solve and fix with a detail way, we will say many thanks. This problem made me feel Lenovo is a hard laptop to use.
please contact to me through email: [email protected] Thank you very much

P.S.: The firewire hub was labeled to be OS X compatible ... Is there any specific data available a firewire hub should meet so that there are absolutely no problems in OS X 10.4?
THX!

Nokia 112 can't connect to audio device

Hi all,
I recently bought a Nokia 112 (RM-837) and wanted to play some music with it.
When I try to play music to my bluetooth audio device (Stereoboomm 500), it displays this error:
"Service not supported by other device".
I am able to successfully pair the two devices, but when I try to connect, it will fail.
Audio device is bluetooth v3.0, Nokia 112 bluetooth v2.1, but this shouldn't be a problem because bluetooth v3.0 is backwards compatible. Audio device is not broken as it works with other phones.
My Nokia has firmware version 3.32.
I tried to update my Nokia with the latest updates, but also this fails (even with factory settings!).
But this shouldn't be the problem either because the update hasn't any changes relating to connectivity.
What could be the problem?
Thanks in advance!
Solved!
Go to Solution.

Okay, I figured it out..
Apparently the Nokia 112 doesn't support the A2DP bluetooth profile that's needed to stream audio to bluetooth speakers.
http://developer.nokia.com/Devices/Device_specifications/112/

No Audio Device Found for Presario R3230US laptop

I had a virus on my R3230US laptop so I restored my computer which has the XP operating system SP3, but have no audio device installed. I downloaded the recommended driver sp28552.exe and when I installed it SoundMax was loaded. Then my computer locked up, and I had to back down to my last good bootup. I have done this a number of times and it always locks up. Is there another audio driver that I should be using? Thanks.

Hi:
XP normally needs the MS UAA bus driver installed and you have to install that before installing any audio driver.
Uninstall the audio driver, reboot and install the MS UAA driver.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
I don't see any XP drivers for your notebook on the support and driver page. You can see if this IDT audio driver for XP works after you take the above steps.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...

Ichat audio video options for google accts

Hi,
1. I use ichat with my google account. I was wondering if I could do an audio and video chat from this account?
2. Also, if I disable my camera (in format tab), and press on the audio option beside my picture in the chat list, why is isight cam getting turned on? Shdn't it be disabled and only microphone be turned on?

Hi,
Re 1)
If you are your Buddy are using iChat with any Jabber ID including Googletalk then you can do Video and Audio Only chats. This is because no matter which Buddy List you start from iChat uses the same A/V Protocols.
What you can not do is Video chats to the PC App for GoogleTalk or to any Buddy logged in on the WebMail Google pages, both of which can also do A/V chats but uses different protocols.
Re 2)
The Video Camera is turned Off in the Video Menu at Camera Enabled and toggling it so no tick shows.
Yes when it is turned Off (Deselected) the icon next to your name should show the Audio icon (Telephone handset).
The camera will however get turned on for the Preview even if the camera is turned Off. A preview of the Audio would not "Show" anything as iChat does not allow play-through of the live sound.
8:26 PM Thursday; July 23, 2009

T42 audio device driver for Windows 7

I installed Windows 7 on a new installed 80gbHD on my T42. After the installation no sound device was found. T42 has a SoundMax device. Can someone giude me to a solution to get the sound working with the Windows 7 operating system? Lenovo site does not have the solution listed. Thank you.

What I did with my A31 was d/l the latest Soundmax driver from Lenovo. For my A31 it was a winXP/Win2k version. Then unpack the file and note the folder. It's usually placed in the C\Drivers\.... Now for the 2 .exe files C:\Drivers\Audioverxxx\Setup.exe and C:\drivers\AudioVerxxx\SMAXWDM\XPWin2K\install.exe (something like that... your files may be different) make sure the compatibility is set to XPSP3. Then run the setup as as admin.
The problem I have found with most older TP specific drivers is Win7 wants signed drivers and these old ones are not. So many times you will have to force feed Win 7 using the update drivers, browse my computer, let me pick from the list, I have a disk. Then point to the folder with the inf file. Win7 will tell you the driver is unsigned but go ahead and install it. So far this method has worked on my A31

Audio Export option for Quicktime

Finishing a 1 hr doc for broadcast. The sound designer gave me a 2 stereo stems, one music and one dialogue. Each stem has a left and right channel (-1,1). All soundws good and balanced. My question is, I'm exporting a master quicktime to send to the tape house. Should I choose:
Channel Grouped
Stereo Downmix
Discrete Channels
All sound the same when I change in sequence settings. Never an issue before (I alway left on default Grouped), but wanted to be sure.
Cheers

... and naturally, no sooner do I post this rant then I discover the answer.
The very first thing I tried, "Export to disk" actually did the right thing. However, my nice, shiny iMac, barely out of the box, has .m4a files configured to open with iTunes, not Quicktime. So when I double-clicked the exported slideshow file, I only heard audio, even though the photos were included. Ctrl-clicking and choosing "Open With... Quicktime" did the right thing.
Whew! That was frustrating. Thank goodness I figured it out, because it was driving me NUTS.

Where do I find GPIO device options for our cameras for Temp/Humidity/AC etc?

I have a partner that is looking to deploy our small business IP Surveillance products integrated with building management for atmospherics and lighting as well as motion. Can someone provide any insight into who provides the I/O devices that would plug into the cameras and trigger the desired recording?
Thank you. Mark

There are many manufacturers of sensors. You need to review the GPIO specifications located in the camera admin guide to make sure the electrical specifications are acceptable.
A source for GPIO devices including temperature sensors is http://www.homesecuritystore.com/default.aspx
There is no endorsement or recommendation for this site, just a reference to start your investigation on available sensors.

TS1398 I cannot start to use my new ipad mini as it is stuck at the very first step after restoring my old backup. It says to choose a wifi, I do and then it says 'Unable to connect' There is no options for a password and I cannot access any other screen!

I have tried going past the first set up stage, still with no wifi. I have then tried restoring the ipad mini, still no wifi available. Both my ipone and Apple Mac have wifi full bars. Please help. I only picked up my new ipad today. I am thinking it may be faulty.
Lele

It may be faulty but you should try to activate it first in order to be sure.
Why don't you activate it using iTunes on the Mac and then troubleshoot the WiFi connection. Connect the Mini to the Mac with the cable and iTunes should startup and take you through activation. If you do not autosync and iTunes des not start up on it's own, then launch it yourself.

How do i u acsess my bluetooth settings thru my phone to change name etc. Also cant connect to any devices

How do i u acsess my bluetooth settings thru my phone to change name etc. Also cant connect to any devices

What devices are you trying to connect to, and are they in pairing mode? Is the phone in pairing mode? The iPhone only connects to audio devices and to computers for tethering. You cannot use BlueTooth on an iPhone for file transfers to other phones or computers.

No audio devices available in late-2013 iMac

Updated Mavericks to 10.9.1 yesterday.
Today there are no analog audio devices available for output. Airplay devices work normally.
I have reset PRAM, disconnected all peripherals etc. Have tried connecting audio devices to the 3.5mm output jack.
Any suggestions?
Thanks in advance.

This issue was resolved by re-installing 10.9 over 10.9.1.
Think I'll wait for 10.9.2 until I update again.

No "connect to audio device" option for E71

Similar Messages

Maybe you are looking for