No Connection after installing SP 2.3 for SAP Integration Kit

Hello Community!
We just installed Service Pack 2 and Fix Pack 2.3 (in this order) for SAP Integration Kit on one of our client's servers. Before that everything worked fine. After the installation I verify the CE connection in /crystal/rptadmin. The result is:
Unable to log on to Enterprise system. Reason: Unable to log on: Could not connect to server vm103:6400. Please check that the server name is correct, and that the server is running.
I checked the RFC connection in sm59 but that works normally. BW Publisher Service is also running. The servers (BW and BO) are on the same machine: Windows 2008, 64bit, SQL Server, BOE XI 3.1 SP 2.
The BW Publisher Trace log shows the following entry:
[Fri Feb 26 12:45:57 2010]     1480     6084     SAP bwcepub: Tracing is enabled.
[Fri Feb 26 12:46:17 2010]     1480     6084     Entering CPubReqPing::Process(1)
[Fri Feb 26 12:46:17 2010]     1480     6084     Logging on to Crystal Enterprise
[Fri Feb 26 12:46:23 2010]     1480     6084     ERROR: .\system_connectors.cpp [479]: l_pSessionMgr->Logon(l_bstrUserName, l_bstrPassword, l_bstrCMSName, l_bstrAuthMethod, &m_pSession) failed with return code l_hr = -2147219455
[Fri Feb 26 12:46:23 2010]     1480     6084     Leaving CPubReqPing::Process(1)
[Fri Feb 26 12:46:23 2010]     1480     6084     Dispatch returned with code 0 and message [See RFC trace file or SAP system log for more details]
When I try to log into BO Info View or CMC with my SAP credentials CMS crashes without any logs!
This is now the 2nd server with that issue!
Any ideas what this could be?
Thank!
phil

No, this happens only by logging in with SAP credentials.
CMS log file shows a huge list of entries like this one:
.\pluginhelper.cpp:276: TraceLog message 1
2010/02/26 11:46:49.316|>>|A| | 936|6040| |||||||||||||||assert failure: (.\pluginhelper.cpp:276). (0 : Error reading pin file E:\Business Objects\BusinessObjects Enterprise 12.0\packages\BusinessObjects_ClientActionSet_CrystalReport_UploadSet_dfo.xmlwarnings:
errors:
fatal errors:
Fatal Error in file: E:\Business Objects\BusinessObjects Enterprise 12.0\packages\BusinessObjects_ClientActionSet_CrystalReport_UploadSet_dfo.xml, line: 1, col: 1, Message: Invalid document structure
But I've got these entries on other systems too...

Similar Messages

Finding Download for SAP Integration Kit Fix Pack 3.1 / ADAPT01412706

Hi all,
by using Crystal Reports 2008 V1 SP3 in combination with SAP Integration Kit 3.1 (SBOP INTEGRATION FOR SAP SOLUTIONS XI 3.1 SP3 WINDOWS (32B)) i get an error during the inportstep of the transports in our BW System.
This error is descriped and solved in Note 1484086
(https://websmp130.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3134383430383626)
Following the Notesteps there is one conclusion using the transport files from the "SAP Integration Kit to FixPack 3.1" . My problem is to find these named Fix Pack in the download area of the Marketplace.
An Fix Pack for the SAP Integration Kit itself seems to be not aviable,
therefore I tried several downloads beginning with:
Crystal Reports 2008 Fix Pack 3.1 - Click Once
Crystal Reports 2008 Fix Pack 3.1 - Redist Install
Crystal Reports 2008 SP3 Fix Pack 3.1
there are no transportfiles in any of these packages.
If any from you have some idea where to find the right transport files, please let me know.
Regards
Marco

Hi Marco,
you can go in Sap Support Portal -> Software Downloads-> BusinessObjects Downloads
in the left select "Search for Software Downloads" then in "Search Term" input:
BOBJINTGRSAP03P
You'll retrieve all available versions of IK SP3 with related fixpacks.
Regards.
Roberto.

Port Forwarding for SAP Integration Kit

I've got a network where the BO server is behind a NAT. I can access the BW server from the BO server but when retrieving data I'm getting a C-PIC error in SAP log with code TIMEOUT. The first explanation I can find is that the BW server is trying to initiate a response but can't due to the NAT.
Are there certain ports that I can configure for forwarding in the NAT, in order to enable two-way communication? The only port I know of is the Tomcat port which I use to access InfoView and CMC.
Thanks

I'm running XI 3.0 and I can access the BW server via SAP Logon from the BO Server. The error I'm getting is:
*Trace file opened at 20080930 190555 GMT Daylight Time, SAP-REL 700,0,159 RFC-VER U 3 981833 MT-SL
======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Excesso de tempo na estrutura de conexão (existe parceiro ?)
ABAP Programm: CL_RSR_MDX_COMMAND============CP (Transaction: )
Called function module: RRTS_PARSE_MDX
User: JOASOUSA (Client: 070)
Destination: MDX PARSER (handle: 2, 01645795, {531A8FDD-869B-F1D5-B431-00145E6A52A6})
SERVER> RFC Server Session (handle: 1, 01629716, {521A8FDD-B93F-F154-AFA1-000C294D8A52})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: WebIRichClient)
SERVER> Called function module: BAPI_MDDATASET_SELECT_DATA
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3295
CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Excesso de tempo na estrutura de conexão (existe parceiro ?)
Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1833
Where "Excesso de tempo na estrutura de conexão (existe parceiro ?)" is translated to "Exceeded time in connection (partner exists?). It seems like the BW can't reach BO. I'm going to read the installation manual to check NAT config.
EDIT: The problem seems to be with the MDX Parser RFC destination after all. Analysing that problem now.
Edited by: João Sousa on Sep 30, 2008 8:23 PM

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
After +/- 10 to 15min my connection is gone.
Does anyone have a sollution?

Lots of people are having the same problem, you're not the only one, belieeeeve me.
Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now. I already posted a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
Site:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

Lost federation connections after installing new certificate

After installing a new NIC for the egde external connection and new GoDaddy 10-slot UCC cert on my edge server and Forefront TMG reverse proxy, I have lost the ability to connect to my federated partners. Snooper logs seem to indicate that the
certificate is not being accepted. Test-CsFederatedPartner returns the message, "This machine does not have any assigned certificate." Running the Lync Deployment Wizard on the edge shows that it definitely does have a certificate. Get-CsCertificate,
Test-CsComputer, and Test-CsCertificateConfiguration all show the new certificate is in place. Digicert's online certificate check has no problem finding the edge server and has verified that the cert is functional. This edge server was running
perfectly for over a year.
I'm stumped. Thanks in advance.

Hi,CJADuva,
Did all your other external access such as external user login and download address book or meeting content work normally?Just the federation broken?
What the SN and SAN entries of the new GoDaddy UCC certificate?Do they meet the external Edge certificate requirements?Check the following links for Edge certificate requirements
http://technet.microsoft.com/en-us/library/gg398920.aspx
http://technet.microsoft.com/en-us/library/gg398519.aspx
If all are ok,please ask your federated partner to check if the Godaddy CA is in their trust CA list,also I remember that Godaddy always has intermediate certificate,please check if you and your partner has installed it too.
Check
http://support.godaddy.com/help/article/869/how-do-i-install-an-intermediate-certificate for more details about installing intermediate cert.
Regards,
Sharon
Sharon Shen
TechNet Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.

After installing the safari update for windows outlook is not opening email links. I have set safari as my default browser but hyperlinks won't open a browser window - I get an error message - "This operation has been canceled due to restrictions in effec

After installing the safari update for windows, outlook is now not opening email hyperlinks. I have set safari to be my default browser but outlook won't open it when I click a link. I get the following message: "This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator." Please help.

Hi mcclausky, you may need to manually remove a policy setting from the registry. You also should scan for malware that might have created this problem.
This article lists scanning and cleaning tools other Firefox users have found helpful: [[Troubleshoot Firefox issues caused by malware]].
To check your Windows registry for policy settings that might affect Firefox or other programs, I suggest consulting a Windows forum or Microsoft's forums. For example:
* http://windowssecrets.com/forums/
* [http://answers.microsoft.com/en-us/windows/forum/windows_8-system/this-operation-has-been-cancelled-due-to/9677848e-072d-4206-87f4-9da9284d6151 This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. - Microsoft Community]
* [http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/restrictions-this-operation-has-been-cancelled-due/8af1d0cd-8fbd-4223-9396-86d7497bb275 Restrictions. This operation has been cancelled due to to restrictions in effect on this computer.Please contact your system administrator. - Microsoft Community]

ITunes Error 7 (Windows error 127) after installing iTunes 64-bit for Windows

After installing iTunes 64-bit for Windows (latest build), I get an error pop-up saying:
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 127)
I've gone thru the uninstall, reboot and reinstall process three or four times now. Still nothing.
Furthermore, after clicking okay to the error, it continues to pop up on it's own every 45 seconds or so.
There was one other error I came across after trying to launch iTunes after installation.
See both error messages here:
http://screencast.com/t/DSg4PpKF5BeX

Brilliant. Thanks a lot. I've wasted a couple of hours on this nasty bug, & trying all the other suggestions across various threads again and again.
I now find I had the same registry entry hanging on, despite uninstalling & wiping everything again and again. Having now deleted this key, (I don't even have an iPod), & iTunes 11.1.14 now opens at long last.
But WHY is this bug not fixed? Enough people are suffering with this across the forum. WHERE is Apple support on this?
It should have been added to their page at
http://support.apple.com/kb/HT1923
by now, why hasn't it???
It's not good enough!
Re:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SharedDlls]
"C:\\Program Files\\iPod\\bin\\iPodService.exe"=dword:80000000
AHA! This entry for iPodService.exe still exhisted. So I had no folders on the PC, no installs on the PC and no services running.... BUT this was still in the Registry.
Step 5 - Delete only the Registry entry above. NO REBOOT
Step 6 - Reinstall iTunes64.exe

On Mac - Android File Transfer stopped working.   It says Unable to connect after installing the Verizon Software Update Utility from phone

On Mac - Android File Transfer stopped working.   It says Unable to connect after installing the Verizon Software Update Utility from phone.

    Hi JoeC695,
That's not good! We want your software to work properly. Have you tried uninstalling the Verizon Software Utility from your MAC? Do you receive a specific error message?
Thanks,
PamelaF_VZW
Tweet us vzwsupport

I just bought and installed logic pro x. and after instal it is asking for synapse audio DUNE registration.. where do I get that?

I just bought and installed logic pro x. and after instal it is asking for synapse audio DUNE registration.. where do I get that?

http://www.synapse-audio.com/

After installing ios7 its asking for a pin number now its disabled how do i carry on

after installing ios7 its asking for a pin number now its disabled how do i carry on

During the update, you must have entered a 4 digit passcode. You must use the same 4 digit to unlock.
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad/iPod into Recovery Mode
http://support.apple.com/kb/ht4097

Installing data quality management for sap for multiple sap system

Hello folks,
I have an Requirement where i need to install data quality management for sap in multiple sap system.
I have installed it successfully for one system .
here my data services is installed in one server with rfc server as windows services in same server.
i have done the required configuration in ecc side.
my question is how do i use same data services jobs which are configured as real time services for both my sap connection?
in simple terms how do i installed dqm for multiple sap system having single data services server.
thanks,
Shubhangi.

Hi Vishal,
Regarding DQM Please refer the below Link.
Links:
http://scn.sap.com/community/data-services/blog/2013/07/18/i-installed-dqm-for-sap-you-can-too
or you can also refer below SNotes given by SAP:
1732816 - How to manually import DQM ATL files correctly after failed install
Note 1732816 - DQM Adapter Dataflow installer fails on Data Services 4.1
Links:
https://service.sap.com/sap/support/notes/1732816
Thanks,
Daya

Error while installing the EHP 1 for SAP NetWeaver Developer Studio (NWDS)

Dear All,
I am trying to install the EHP 1 for SAP NetWeaver Developer Studio (NWDS) 7.1 .It got installed once but when i was trying to deploy the application i was getting an error sayind that we need to have JDK1.5 Update 14 or higher for the installation.
Now i have JDK 1.5.0_14 installed in my system.So i Uninstalled the EHP 1 for SAP NetWeaver Developer Studio (NWDS) and i am trying to reinstall it but i am getting the following error
ERROR:
Unable to complete action for feature "SAP NetWeaver Developer Studio Facades" due to errors.
Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:\DOCUME1\NS46249\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "D:\Program Files\SAP\IDE\CE7.1.1\eclipse\features\com.sap.netweaver.developerstudio.facades_7.1.0.081112155351". Log file: "C:\DOCUME1\NS46249\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
Can anybody please help me in resolving this issue.Please help needed as early as possible.
Thanks in Advance:)
Regards,
Nishita Salver

Dear Nishita,
I hope you have removed the older version of jdk before installing the new version of jdk. Also after un installation of NWDS, did you delete all the temp files and also the directories created during the original installation of NWDS. Also did you restart your system after the uninstallation of NWDS EHP1 and older jdk before reinstallation of the two softwares?
Regards,
Veera
P.S. The first thing you can try is restarting the PC and try resuming the installation, if it doesnt succeed, please remove all traces of NWDS and JDK, restart pc and then resinstall both of them.

SAP Integration Kit for Crystal Reports

Hello,
I read Ingo Hilgefort's blog on BusinessObjects and SAP Part 2.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Does the current trial version of crystal reports available from businessobjects.com have this integration kit embedded in it?
If not, where can i find it?
Regards,
Suraj

hi shenoy,
SAP Integration Kit
The SAP integration kit includes drivers to allow connectivity to both R3 and Business Warehouse (BW). In addition, it includes a BW toolbar for Crystal Reports, a specific version of InfoView with Role-based links, sample iViews for Enterprise Portal, and an SDK in Java, COM, or .NET.
Reporting off R3 Data
The kit includes two drivers to allow Crystal Reports to connect to the ABAP data dictionary via a remote function call or RFC.
The Open SQL driver allows the user to connect to SAP R3, displaying the field and the short text description of the tables and fields. The developer can then join the tables accordingly, using the database expert, and then select the relevant fields from which to report. This driver displays not only transparent tables, but includes views, pool tables, cluster tables, ABAP data clusters, and ABAP functions. This driver is geared toward a technical person with functional expertise in joining the tables and then creating the report.
see link
http://safari.oreilly.com/0672329174/ch15lev1sec7#X2ludGVybmFsX1RvYz94bWxpZD0wNjcyMzI5MTc0L3BhcnQwMg==
http://diamond.businessobjects.com/node/18962
SAP Integration Kit
The SAP integration kit includes drivers to allow connectivity to both R3 and Business Warehouse (BW). In addition, it includes a BW toolbar for Crystal Reports, a specific version of InfoView with Role-based links, sample iViews for Enterprise Portal, and an SDK in Java, COM, or .NET.
Reporting off R3 Data
The kit includes two drivers to allow Crystal Reports to connect to the ABAP data dictionary via a remote function call or RFC.
The Open SQL driver allows the user to connect to SAP R3, displaying the field and the short text description of the tables and fields. The developer can then join the tables accordingly, using the database expert, and then select the relevant fields from which to report. This driver displays not only transparent tables, but includes views, pool tables, cluster tables, ABAP data clusters, and ABAP functions. This driver is geared toward a technical person with functional expertise in joining the tables and then creating the report.
Note
In Crystal Reports, you cannot check the SQL generated using the Show SQL Query option from the Database menu. You can check what Open SQL was generated by using SAP transactions.
The InfoSet driver allows the user to connect to an existing InfoSet, as defined by SAP transaction SQ02. Alternatively, you can use an existing ABAP query, as defined by SAP transaction SQ01. The benefit of this driver is that the user does not need to know where the data is stored or how to join the tables. Another advantage is that any prompts defined in the InfoSet become parameters in Crystal Reports.
Note
To test the InfoSet query, run the InfoSet using your SAP GUI and ensure that it is pulling the required data first before testing it in Crystal Reports.
Reporting off BW Data
When reporting off of BW data, the Business Objects' Integration Kit consists of three drivers that are used to pull data.
The BW Query driver enables the user to connect to a BW query. To enable selection of a query with this driver, Crystal Reports has its own toolbar, as shown in Figure 15.3, and the user needs to select the New Report icon from this toolbar. The user then selects the required BW query, and thus displays a listing of fields available in the query. The user can then create the report using any of those fields. Variables defined in the query automatically become Crystal Reports parameters. After the user has finished building the report, the user saves the report using the BW toolbar. This saves the report to BW, and if the user selects the option to do so, automatically publishes the report to Enterprise.
Figure 15.3. Crystal Reports after the SAP integration kit is loaded. Note the SAP menu and BW toolbar.
[View full size image]
Two new drivers have been added to the XI R2 version of the SAP Integration Kit.
The MDX query driver supports using Crystal Reports to report off either a SAP BW query or a BW Cube.
Furthermore, it adds additional functionality by providing support for
A structure in both the row and column of the BW query
Hierarchy node and hierarchy node variables
Free characteristics in a BW query
The Operational Data Store or ODS driver exposes the ODS tables, so that they look much like the tables of any relational database. However, because of the structure of the objects, it considers them to be like a database stored procedure.
Connecting to the ODS objects is not performed with the SAP toolbar described here, but rather by selecting the driver from the Data Explorer as shown in Chapter 1, "Creating and Designing Basic Reports." After the user has finished building the report, the report can be saved back to BW and published to Business Objects Enterprise by selecting the Automatically Publish to Enterprise check box, as shown in Figure 15.4.
Figure 15.4. The additional options after saving a Crystal Report to SAP BW.
Note
This publishing method requires some setup. Please refer to the Installation documentation for further details.
Note
Both the ODS and MDX drivers require SAP transports to be loaded on the SAP BW system. Please refer to the Installation CD in the Transports folder for further details.
Using OLAP or Web Intelligence to Report off BW Data
Included in the SAP Integration Kit are specific drivers to allow OLAP Intelligence and Web Intelligence to report off of SAP BW.
To connect to a BW cube or query using OLAP Intelligence, open the connection browser and select Add. Select SAP Business Information Warehouse and then proceed to fill in the relevant data, as shown in Figure 15.5.
Figure 15.5. The information required to connect to a BW cube or query from OLAP Intelligence.
[View full size image]
After you are connected, select the query or cube and process to build the report, as described in Chapter 19, "Creating OLAP Intelligence Reports."
Web Intelligence is new to XI R2 and requires that a universe be built on a BW Cube or Query. However, to aid in this process, Designer builds the universe for you. To do this, select SAP from the list of connects and fill out the required information, as displayed in Figure 15.6.
Figure 15.6. The information required to connect to a BW cube or query from Web Intelligence.
[View full size image]
Finish the remainder of the wizard and when you click OK, Designer generates the Universe for you. It may be necessary to move some of the objects around to suit your needs, but when you are finished, export to Business Objects Enterprise.
Note
Only the BW query driver does not require the query be released for external access. The Web Intelligence, OLAP Intelligence, and MDX drivers require the user to release the BW query. To release a query, select the query properties in the BW Query Designer and select the Extended Tab and then check Allow External Access to This Query.
Viewing the Reports
Your SAP reports can be viewed either via the SAP integration kit's InfoView or via SAP Enterprise Portal 6. The integration kit provides a number of sample iViews that can be imported by a portal administrator. These include
Folder iView The folders a user has access to are displayed, and from here a user can run her reports.
Alert iView Shows all the alerts that have been triggered by Crystal Reports. The user can then click on the report to view the report. The creation of alerts is defined in Chapter 11, "Using Record Selections and Alerts for Interactive Reporting."
Thumbnail iView This iView displays the Crystal Report as a thumbnail of the report. The user can then click on the thumbnail to run the report.
Note
These are sample iViews. The organization can create its own iViews via the provided SDK.
BusinessObjects InfoView for SAP is a unique version of InfoView designed for integration with SAP BW systems. This integration includes features such as the ability to log on to InfoView using your SAP username and password. Related to authentication is the ability to access your roles and the Crystal Reports saved to these roles. The roles are defined in Enterprise as folders. The user can also schedule reports in the different languages loaded into SAP BW. This creates an instance for each language.
for remainig info pls use the link
http://book.soundonair.ru/sams/ch15lev1sec7.html
very good link for sap integartion kit
thanks
karthik
reward me points if the above info is usefull.
dont forget

Error while installing SAP integration kit 3.1

Hi,
I installed SAP integration kit 3.1 on one server and it is working fine but when i am installing same installable on another server it is giving error as "Installation ended prematuarly because of an error". I dont know how to debug the error. Please help me.
Thamnks in advance

Hi Sonali,
had a similar problem on a Windows/Tomcat system. The installation was crashing before trying to deploy the .jar files. If you are facing the problem in a similar environment please make sure that you have copied the librfc32.dll and the sapjco.jar files in the correct directories. Especially for sapjco.jar doublecheck the path you have copied the file into.
Regards,
Stratos

Core Dump when installing SAP Integration Kit Fix Pack 3.1

When installing the SAP Integration Kit Fix Pack 3.1 we are getting the following error message..
boperl.sh[88]: 9961568 Memory Fault (Core Dump)
This install is being done on AIX after the SP3 was installed.
Any ideas?
Thanks,
Deepti

DO you install the SP3 full version of the integration Kit?
Regards,
Stratos

No Connection after installing SP 2.3 for SAP Integration Kit

Similar Messages

Maybe you are looking for