No connection between Desktop software and Blackberry

All of a sudden on Thursday the phone and the desktop software stopped talking.  I've been through all of the suggestions in the 'Troubleshooting the Desktop Software' page and the phone still won't connect.  The desktop manager is simply showing 'Connect your Blackberry Device'.
Running XP Pro SP3, Desktop Software 6.1.0.35.
The phone is a Blackberry 9300 running software version 6.0 Bundle 2475 (v.6.0.0.546, Platform 6.6.0.207).
Thanks for your suggestions.

So, it's now been a week since this stopped working and three days since I posted here about it.
Is there anywhere else I can go to get this fixed, since apparently Blackberry simply don't give a fig?

Similar Messages

  • Wrong Phone Number Listed when connected to desktop Software (and a few other probs)

    I just downloaded the New Desktop Software.  When I connect my Tour, it displays the wrong phone number.
    I got this phone from a friend.  It has been wiped and all.  I wonder why it displays her phone number instead of mine.  My phone calls out and recieves calls and messages just fine.  It aggreavates me though.  below is the screenshot of it.  please help
    http://i694.photobucket.com/albums/vv308/dixie_boysles/screen.jpg
    -Blackberry Tour 9630
    -5.0.0.484 OS
    US Cellular Customer

    I am having the same problem. 

  • Blackberry Desktop Software and Blackberry bold 9780

    I am trying to synchronize my blackberry to Outlook but I am getting this error.
    Synchronization Error: A program error occurred at line 41 in .\OLTransUtil.cpp.  Please report this error by sending a log to technical support.
    23:52:53.015 Logging Verbosity Set To '2' - Logging Enabled
    23:52:53.016 SyncAPI logging for product
    23:53:41.843 SyncObject:tartSync
    23:53:41.868 Synchronization Thread Running
    23:53:41.868 Sync Engine Starting
    23:53:41.883 Starting Loading Contracts
    23:53:41.883 Ending Loading Contracts
    23:53:41.883 Starting Translator Verification
    23:53:41.894 Ending Translator Verification
    23:53:41.894 Starting App Validation
    23:53:41.947 COLTransUtil::InitializeOlAccess - Exception was thrown from COlAccess constructor.
    23:53:41.947 Error Information: 14005 (000036b5) (KnownErrorWithLocalizedText), Description: A program error occurred at line 41 in .\OLTransUtil.cpp. Please report this error by sending a log to technical support., File: .\OLTransUtil.cpp, Line: 41
    23:53:41.947 Ending App Validation
    23:53:41.951 Sync Engine Completed (14005)
    23:53:41.951 Sync completed at 11:53:41 PM on 07/02/12
    23:53:41.951 Sync completed at 11:53:41 PM on 07/02/12
    Any help would be appreciated.

    Hello,
    You seem perhaps to already have tried at least some of what is discussed in this thread, but I cannot tell if you've truly tried it all...therefore, I suggest this thread:
    http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
    It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
    Otherwise, it really sounds like you have some major conflict or issues with your Windows OS itself. While quite rare, it's not unheard of needing to completely reinstall Windows so as to get things working well. But, before you resort to that, you should do all of the normal Windows stuff -- Windows updates, check all of your apps for updates, run registry cleansers, run full virus scans, run malware detectors, etc. etc. etc. This very much sounds like a PC/Windows problem more than a Desktop Software problem.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • MAC Desktop software and Blackberry 9900 OS7

    I am not sure if it is justy me but having huge synch problems with my new 9900.  The orginal format of the BB software have options to the left of the screen for Calendar, contacts, tasks and notes.  This does not appear anymore as with my previos Bold.  I have downloaded the latest update to my MAC but still no joy.  Any ideas??
    Rgds,
    Rick.

    I have this same problem with you when I just updated to the new Desktop Software, I was syncing music and contacts fine until that update. This is really bugging me right now. I need to sync music and photos. It's much easier. HELP
    EDIT: found the problem. got this from a previous thread. Resize the application window. Everything will come back again

  • Error when trying to configure sync between Outlook 2003 and Blackberry Desktop Software 4.6

    I am unable to configure the Blackberry Desktop Software (version 4.6) to sync with my Outlook 2003.  I used to have an older version of the desktop software and it worked just fine.  I got a new phone and updated the software and am unable to configure the sync.  I get the following message when I try to configure it: "Runtime Error: folder is no longer part of the system data source or the folder could not be found."
    Please help.  I need these to sync.

    HI and Welcome to the Forums!
    I suggest trying a clean DTM uninstall:
    KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
    followed by reinstalling from scratch. You should be able to go to the latest v5.0 with Outlook 2003...it's available here:
    http://na.blackberry.com/eng/services/desktop/#tab_tab_overview
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Problem: Hotsync error message "The connection between your device and the desktop could not be establisthed."

    When I Hotsync Bluetooth connection is successful, then in step 2, "Connecting with the desktop" Hotsync errors out with message "The connection between your device and the desktop could not be establisthed.  Please check your setup and try again."
    Bluetooth configuration inticates Bluetooth serial port COM Port is set to COM3
    Hotsync setup: when I click "Local" tab I get error message "The selected port, COM5, is not available at this time.  HotSync Manager will open the port when it becomes available."
    Hotsync setup > "Local" tab > Serial Port dropdown shows only COM4.  I cannot change it to anything else.
    Note: I can send files to PC using Bluetooth just fine; error only occurs when I Hotsync using Bluetooth connection.
    Tried rebooting both laptop and Palm TX.  Still can't Hotsync.
    Operating system: Windows XP Pro
    Post relates to: Palm TX

    You are not the only one having this problem. I have REPEATEDLY tried to bluetooth sync with my new toshiba windows 7
    Palm 6.2.2 to no avail. I have tried every bluetooth device they suggest and every "fix" or "solution" that has been offered here and in on line chat with a Palm tech. No dice! I even took my computer and all components to a tech. He worked on it for 5 hours. Every once in a while for no apparent reason it will magically sync, but never consistently. Using 32bit on my husband's computer with Vista, and the docking cradle still works so I have my data. A few others have apparently had success with this problem but I think it is an accident that it works for them when it does. Otherwise it would work for everyone. We have read everything we can find and spent literally hours and hours and hours.
    I am now in the process of trying to import/export to Outlook and plan to upgrade to another device like iPhone or blackberry that will sync data with Outlook. My Palm TX also has not been able to successfully sync with that although, as I said earlier, it syncs with Palm Desktop. Good luck with your's.

  • Initial sync between Desktop Manager and 8320 does not recognize internet connection

    Am unable to do an initial sync between Desktop Manager and BB Curve 8320.  Am getting error The computer must be connected to the Internet in order to initially configure synchronization settings. Please ensure that you are able to connect to the Internet and try again.  Tried with version 4.3 and 4.6.0.12.  I have a broadband connection that is always on and have also tried wirelessly.  Any suggestions are appreciated.

    Hi,
    First we need to do a clean install of the DM you have on, this will clean up the other installation as well,
    http://www.blackberry.com/btsc/search.do?cmd=displ​ayKC&docType=kc&externalId=KB02206&sliceId=SAL_Pub​...
    After you are down download DM 4.5 with NO MEDIA MANAGER from here:
    https://www.blackberry.com/Downloads/entry.do?code​=A8BAA56554F96369AB93E4F3BB068C22
    Just for trouble shooting purpose, turn off firewall and virus checkers,
    Bring DM, go through the setup wizards, connect your BB and do a BACKUP first
    Let me know how it goes!
    Thanks
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • "USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

    Hi,
    I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past.  Thank you board members! 
    Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago.  There have been no changes (I know of) to the configuration, but now I receive  "The connection between your device and the desktop could not be established.  Please check your setup and try again."  On the laptop I sometimes get  "USB device not recognized."  I am unclear why I get the PC message sometimes and not others.   
    I have tried the following: (not necc exactly in this order)
    Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
    Reset the Palm (multiple times)
    Rebooted the laptop  (multiple times before and after the Palm resets)
    Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
    and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409) 
    Followed the steps in "Start Here" found at  http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057 
    Moved Backup directory as per a post on this forum
    Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
    Followed the steps in HotSync troubleshooter guide you can run through located on
    http://kb.palm.com
    Went into Device Manager - found it shows no yellow ! 's
    Followed Device Mgr Troubleshooter - went all the way thru with no solution 
    Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue.    ...? 
    Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
    Read all the posts under "USB device not recognized." 
    OK, I'm at a loss, can anyone help me?  Many thanks in advance! 
    ~Bob
    Post relates to: Tungsten E2

    Hello!
    Using a cradle with the Tungsten E2?  Tried bypassing the cradle and just use the hotsync cable?  Tried a different computer yet?  Somehow, the PC is having problems getting a signal from the device.  I assume you have the laptop charger plugged into the laptop during this?  Not going through a docking station or port-replicator.
    One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop.  This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time.  Keep me posted.
    Post relates to: Treo 650 (Unlocked GSM)

  • Playbook will not connect with Desktop Software

    Playbook won't connect with desktop software any longer. Seems to have started after latest update to 2.0. Still working fine with my Torch 9810, but not with the Playbook. I even tried reinstalling the Desktop software, but no go. Tried to "forget" Playbook, but now I can't even add it as a device any longer!

    possible you need to uninstall Device Manager, not Desktop Software.
    Disconnect the PB from the computer.
    Uninstall the Device Manager.
    Reboot your computer (for good measure)
    Connect the PB using the USB cable.
    Now you should see a PlayBook CD-ROM.
    In that CD-ROM you will find version 7 of the Device Manager, install it.
    Once installed disconnect the PB from the computer.
    Wait for about 15 seconds then plug it back in.
    Windows should detect new device and start Device Manager. It may take up to two minutes for windows to detect and properly install.
    Then device manager will map 'z' drive to the PB.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • (Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

    Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
    I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
    Let me know if you know why this is happening.

    With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
    Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
    While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
    I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
    You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
    Something you can try:
    System Preferences -> Network
    Gear icon on the bottom left, next to the [+] [-] icons.
    Select *Set Service Order...*
    Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
    NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

  • Can't establish wireless connection between the printer and computer.

    I recently upgraded my wireless to an Apple AirPort Time Capsule. I'm able to set up the printer via USB cable. And I'm able to set up the printer on the network via the Airport WPA utility. However I cannot establish a wireless connection between the computer and the printer. When I go to the printers window  in my system prefereces, there is no wireless printer available to add in the "available printers" menu. Only the USB version printer is listed and of course when I disconnect the USB cable it shows as offline.I've tried all the fixes on HP's support pages. I've tried reinstalling the printer on both the router and the computer numerous times. The only thing I haven't done is reinstall the printer using the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download). And when I reset the printer to factory settings, then connect it to the computer via the USB, there is no installation software that pops up. Cant even find the **bleep** thing in "Finder". (I'm assuming that it should show up as some sort of external device.) I've checked to make sure both computer and printer are on the same network. (sometimes my computer will grab a connection with the next nearest network.) I've checked all the settings for the printer via the HTML configuration utility. I've even updated my Macbook software and restarted it multiple times. Note: the printer actually worked for a bit when I first switched routers, but the printer's wireless function went offline several times and then quit  altogether. Really frustrated that I bought another HP product thinking this time things would be different. HP is no help unless you want to pay $$ for a phone call. I'm about ready to take this thing out in the desert to use for target practice and never buy another HP product ever again.

    Hi , I saw your post regarding the problems you are having with your LaserJet Pro P1102w Printer not showing on your Macintosh computer. I may have found some resources for you. 
    I have a few questions for you, so I can offer some additional assistance:Before you upgraded to the Apple AirPort Time Capsule, was the printer working wirelessly without any issues?
    When you say; 'I reset the printer to factory settings', how where you trying to do this? 
    I found some instructions from this post: How do I reset my Laserjet p1102w to its defaults, copied here for you:
    To restore the printer back to factory settings, turn the printer off, hold down the wireless button and the cancel button (x button) then turn the printer back on and don't release the two buttons until the printer stops making noise. (When they say turn the printer off, I think they mean unplug the power cable.)
    "I've checked to make sure both computer and printer are on the same network."  Do you know if you are able to access the printers Embedded Web Server (EWS)?To access the EWS - Make sure that the Ready light () is on and that the printer is idle and silent.Press and hold the Cancel button (), and release it when the Ready light () begins blinking.The configuration page prints.Type the IP address or host name of the product in the address field of a supported Web browser, and then press Enter on your keyboardLet me know if this page loads 
    To answer a few more items you have listed:... When I go to the printers window in my system preferences, there is no wireless printer available to add in the "available printers" menu.This could be an issue with your print system, I recommend resetting the printing system and then Repair Disk Permissions - after that try to add the printer again.
    ... the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download)HP provides their software/drivers to Apple to be released through your Apple software updates. You can review this document on how to Install a Mac Printer Driver Using Apple Software Update. Which leads into your next point...
    ... there is no installation software that pops upWhen you connect the USB cable your mac may still recognize the printer software as being already installed - check for apple updatesOn the Mac, click the Apple menu (), and then click Software Update, or click About this Mac, and then click Software Update. A list of available updates displays.
    ... Not seeing the printer in "Finder" From what I understand most printers will not show in Finder unless you install a memory card into a supported port on certain printer models, only then will it read it like an external device. A few more things you can check are that the new settings in the Apple AirPort Time Capsule are setup to allow the printer to communicate. There are several of these settings listed in this document; Tips and Workarounds for Common Wireless Network Printer Issues.  HP regularly releases firmware updates that may also correct the problem you are experiencing. You can click on this link to Getting Printer Updates for HP LaserJet Pro P1102w Printer.  I did find 2 more documents that may offer some additional information as well;HP LaserJet Pro P1102w Printer - Connecting the Printer After Changing Your Wireless NetworkAn 'Unable to Find Printer' Error Displays for the HP LaserJet Pro P1102w Printer  Please let me know if any of these steps resolved your issue, or the details of what happened.  I look forward to hearing from you, hopefully with good news!   Thanks, 

  • My bb torch 9860 does not connect with desktop software

    My phone is not working (start) i want to reload my os but i lt does not connect with desktop software...plz help me out

    Duplicate :
    http://supportforums.blackberry.com/t5/BlackBerry-​Torch/after-restart-reset-its-hang-on-main-screen/​...
    Hi there,
    One thread is enough for an issue  
    Please check you existing  thread !
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Cannot download desktop software and the one downloaded won't install

    I've tried several times to download the blackberry desktop software and I've been having trouble downloading; it keeps been constantly interrupted during download. i was able to get a full version later but it did not install. it said something about the installation file not been validated and i should try again. i've been on it for a long while and don't know what to do.

    Haven't got a solution, but want to see if I've got same problem- got 9300; windows 7 (tried download on both ultimate and premium)- keeps saying download unsafe- currpted

  • Desktop software and Windows xp

    Hi, can anyone help me I am trying to download the drivers for the desktop software but it is not working. I am running windows xp sp3 32 bit. and a BB Torch 9800. I have uninstalled my previous BB desktop software and was hoping by installing a newer/different version that I might finally be able to sync my BB with my desktop.
    Thank you

    Hi and Welcome to the Community!
    Sadly, from merely "it is not working", there is little to deduce...you'd need to tell us exactly the steps you attempt and exactly the results of each step, including the exact and complete content of any error messages presented to you. But, from "it is not working", there really is no way to make any sort of guess that would help you.
    Nevertheless, perhaps some of the things in this thread will be of use to you:
    http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
    It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Can't make a connection between my tv and laptop

    I can make a connection between my laptop and tv as far as being able to view the picture I have as my wallpaper on the tv, but that is all.  If I change the wallpaper picture on my laptop it will change on the tv also, but again that is all I can do. That is far as I can get.  Just a picture, no icons, no nothing.  I have connected using a 15 pin cable on both ends.  I have windows xp.  There must be a setting in control panel, display or somewhere but I cannot find it.
    HELP

    Thanks, but that didn't work.  Nothing happened.  This time however I completely turned off the tv and computer.  When I booted up the tv screen showed my password sign in screen.  I entered my pass word,  The screen momentarily showed my complete desktop, both  wallpaper and icons but after about a second or two it blinked and then showed only my wallpaper as before.  Puzzling.  There has to be an answer somewhere.
    Thanks for your help.

Maybe you are looking for