No Connection between EIS console and the Integration Server
HI,
EPM System 11.1.2.2
1. I have Integration Server and Oracle on the same machine (windows 2008 R2 x64).
2. I have created ODBC(system DSN) on the same server.
3. I have a client machine (windows 7 x64) on which EIS console has installed.
4. Error while connecting to the Server with IP address, the Catalog ODBC DSN drop down keeps on loading and results in No connection error.
Tried:
1. Created a ODBC with the same name as on the Server, ODBC has created. But from EIS Console, I enter the IP address of the Integration server, click on Catalog ODBC DSN, no connection error.
No errors on Server log.
The Port 3388 is opened.
From Shell:
Used the command LOGIN xx.x.x.x
Results in Network error xxx.x.x.x:1423
Essbase Server is just fine and can be connected from the same client machine from smartview,MAxl, EAS
The same worked for me on different environment.
Any suggestions would be apprecaited!!!
Any Help on this please!!!
Similar Messages
-
Hi,
I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past. Thank you board members!
Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago. There have been no changes (I know of) to the configuration, but now I receive "The connection between your device and the desktop could not be established. Please check your setup and try again." On the laptop I sometimes get "USB device not recognized." I am unclear why I get the PC message sometimes and not others.
I have tried the following: (not necc exactly in this order)
Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
Reset the Palm (multiple times)
Rebooted the laptop (multiple times before and after the Palm resets)
Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409)
Followed the steps in "Start Here" found at http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057
Moved Backup directory as per a post on this forum
Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
Followed the steps in HotSync troubleshooter guide you can run through located on
http://kb.palm.com
Went into Device Manager - found it shows no yellow ! 's
Followed Device Mgr Troubleshooter - went all the way thru with no solution
Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue. ...?
Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
Read all the posts under "USB device not recognized."
OK, I'm at a loss, can anyone help me? Many thanks in advance!
~Bob
Post relates to: Tungsten E2Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM) -
When I Hotsync Bluetooth connection is successful, then in step 2, "Connecting with the desktop" Hotsync errors out with message "The connection between your device and the desktop could not be establisthed. Please check your setup and try again."
Bluetooth configuration inticates Bluetooth serial port COM Port is set to COM3
Hotsync setup: when I click "Local" tab I get error message "The selected port, COM5, is not available at this time. HotSync Manager will open the port when it becomes available."
Hotsync setup > "Local" tab > Serial Port dropdown shows only COM4. I cannot change it to anything else.
Note: I can send files to PC using Bluetooth just fine; error only occurs when I Hotsync using Bluetooth connection.
Tried rebooting both laptop and Palm TX. Still can't Hotsync.
Operating system: Windows XP Pro
Post relates to: Palm TXYou are not the only one having this problem. I have REPEATEDLY tried to bluetooth sync with my new toshiba windows 7
Palm 6.2.2 to no avail. I have tried every bluetooth device they suggest and every "fix" or "solution" that has been offered here and in on line chat with a Palm tech. No dice! I even took my computer and all components to a tech. He worked on it for 5 hours. Every once in a while for no apparent reason it will magically sync, but never consistently. Using 32bit on my husband's computer with Vista, and the docking cradle still works so I have my data. A few others have apparently had success with this problem but I think it is an accident that it works for them when it does. Otherwise it would work for everyone. We have read everything we can find and spent literally hours and hours and hours.
I am now in the process of trying to import/export to Outlook and plan to upgrade to another device like iPhone or blackberry that will sync data with Outlook. My Palm TX also has not been able to successfully sync with that although, as I said earlier, it syncs with Palm Desktop. Good luck with your's. -
The lease timeout between avaiability group and the Windows Server Failover Cluster has expired
Hi,
I am having some issues where I get a lease timeout from time to time. I have a Windows 2012 Failover Cluster with 2 nodes and 2 SQL 2012 Always-on Availability Groups. Both nodes
are a physical machines and each node is the primary for an AG.
From what I understand if
the HealhCheckTimeout
is exceeded without the signal exchange the lease is declared 'expired' and the SQL Server resource dll reports that the SQL Server availability group no longer 'looks alive' to the Windows cluster manager. Here are the properties I have setup
which are the default settings:
LeaseTimeout - 20000
HealthCheckTimeout - 30000
VerboseLoging - 0>
FailureConditionLevel – 3
Here are the events that occur in the Application Event Viewer:
Event ID 19407:
The lease between availability group 'AG_NAME' and the Windows Server Failover Cluster has expired. A connectivity issue occurred between the instance of SQL Server and the Windows Server Failover
Cluster. To determine whether the availability group is failing over correctly, check the corresponding availability group resource in the Windows Server Failover Cluster.
Event ID 35285:
The recovery LSN (120881:37533:1) was identified for the database with ID 32. This is an informational message only. No user action is required.
SQl server logs are too long to post in this box but I can send them if you request.
The AG is setup to failover automatically but it did not failover. I am trying to figure out why the lease timed out. Thanks.From what I've been able to find out, this is due to an issue with the procedure sp_server_diagnostics. It sounds like the cluster is expecting this procedure to regularly log good status "Clean" in the log files, but the procedure is designed not
to flood the logs with "Clean" messages, so only reports changes, and does not make an entry when the last status was "Clean" and the current status is "Clean". The result is that the cluster looks to be unresponsive. However, once it initiates
the failover, the primary machine responds, since it was never really down, and the failover operation stops.
The end result is that there really never is a failover, but the database becomes unavailable for a few minutes while this is resolved.
I'm going to try setting the cluster's failure condition level to 2 (instead of 3) and see if that prevents the down time.
blogs.msdn.com/b/sql_pfe_blog/archive/2013/04/08/sql-2012-alwayson-availability-groups-automatic-failover-doesn-t-occur-or-does-it-a-look-at-the-logs.aspx -
Howto sync between alsb console and the Oracle Workshop
I was wondering if it's possible to sync between my project in Oracle Workshop for WebLogic and the project which is deployed on the server.
When i do some changes in the alsb-console i want to see/sync/import them in my project in the workshop too.
Is this possible?
Thanks!
EricHi Eric,
I'm afraid this is not possible. We recommend when using Oracle Service Bus you use either Workshop OR the console, but not make changes in both as things can quickly get out of sync. I would recommend doing your development in Workshop (as it is more developer friendly) and then switch to the console to make changes you cannot perform in Workshop, such as the operational settings (throttling, monitoring, etc.)
Thanks,
Chris -
I cant establish a connection between Mac mini and the wireless keyboard
I just bought a Mac mini but I can't link the wireless keyboard with the Mac mini
Same with my new mac mini.
Got it brand new via the online shop.
Happy to start with the new mac i really got dissapointed by the fact that it`s impossible to pair the wireless keyboard unless you first connect a USB keyboard to the mac mini and start the configuration.
THIS ***** !!!
No hint at all from apple that you first have to connect the USB keyboard.
I had to borrowed a USB keyboard from my neighbour :-((
After setting things up it was no problem at all to establish the BT connection with the keyboard.
Works fine now. -
What is the connection between programs saplvo5t and the transaction va05?
hi all,
i really wonder that i have put a break point in a subroutine move_userfields in an include V05TZZMO and when i execute va05 transaction breakpont stops at this subroutine? How can this happen when the program behind va05 is SAPMV75A.
Please help..Hi Vijay ,
The transaction VA05 calls the FM <b>RV_SALES_DOCUMENT_VIEW_3</b> .
The main program of this FM is SAPLV05T and the include you are talking about is a part of this FM .When you see the debugger take a look at the call stack and thing will be clear for you .
Thanks ,
Varun . -
Have had my Tungsten E2 for 3 years...I always use cable to Hotsync, and the last few weeks it has worked only intermittently. Either the device is not recognized, or it starts the HotSync and then freezes. I have checked out various online suggestions but then discovered that the only thing that seems to work is to exit Hot Sync Manager, then restart it again each time - then Hot Sync seems to work fine - a temporary solution! I don't have Bluetooth capabilities. I can't figure out if I need a new cable, a new OS (have Vista), a new laptop (only 2 years old) or a new Palm! Any suggestions? Thanks!
Post relates to: Tungsten E2Hello!
The next time that happens, USB device not recognized error, unplug the cable from the PDA and pc, then soft reset the device, then plug the PDA back in and see wat happens.
Post relates to: Treo 650 (Unlocked GSM) -
How to create ODBC connection between Oracle 10g and MS SQL Server
Hi,
Can someone help us with the steps to create an ODBC connection between Oracle APPS using Oracle 10g database and MS SQL Server.
Requirement is to extract the transactional data from MS SQL Server on a daily basis and dump it into Oracle tables for an interface to be run. Currently it is being done through Dataloader tool which we feel is causing the data issue with Arabic characters. We want to create the ODBC directly between Oracle and MS SQL Server and check if the data is being pulled correctly.
The data is in sql server 2000 which has data in Arabic_CI_AS character set which is moved to Oracle 10.2.0.3 database with characterset AL32UTF8. The table data is moved to oracle using the dataloader 3.6 standard edition licensed version. We cannot change the character set of Sql Server 2000.
Please help
Thanks
ShanilHi,
If you're trying to PULL data from SQLServer into an Oracle database, you wouldnt use Oracle ODBC driver for that, so you may want to post in the Heterogeneous Services forum instead:
Heterogeneous Connectivity
If you're trying to PUSH data from SQLServer into an Oracle database, you could use ODBC but most folks use OLEDB for that, and the following note on MOS should help:
How to Create a Sql Server Linked Server With The Oracle Provider for OLE DB (Doc ID 191368.1)
As with any NLS related issue, the first thing to do is dump the codepoints of the data in the Oracle database to see if it is stored validly, rather than relying on what the data "looks like" from some tool or other. It's best to check a single row, with only a few characters in it if you can, and you can do that via
SELECT DUMP(<columname>,1016) FROM <tablename> WHERE ...
Hope it helps,
Greg -
How to make HTTP connection between a midlet and a php server?
As the title above, can anyone share how to make a HTTP connection between those 2? J2ME and PHP. Thanks a lot!
Can you be a little more specific on what you really want.
When i started doing j2me application, i was required to be able to comunicate to a oracle client database, and my first though was using PHP based pages to comunicate and do the query. Later they would just generate the answer and get it on the cellphone. You can communicate with a PHP server via either GET or POST. I'd choose POST as is more secure IMO.
Here are quite a good ammount of examples of how you can do it
http://www.java2s.com/Code/Java/J2ME/Networks.htm
They aren't PHP based examples, but you have can an idea of how it can be done -
Cant connect at BAM console from the second server
Hi
I have BAM 11.1.1.3.3, running with 2 managed servers (cluster). I created a user on WLS console with DefaultAuthenticator method.
I associated this user as Report architect at BAM Grid Control.
I can connect at OracleBAM apps from one server, but from the second server I get error:
BAM-00223: service oracle.bam.adc.common.core.IDataStore
What could it be??
TXDid you configure the BAM cluster in active-passive mode. Since the BAM server does not support active active configuration.
By looking at the error it looks like the BAM server is trying to start on the other node. Please follow the SOA HA documentation to configure BAM active passive.
Thx
Ritesh -
Dear ALL,
Our duty is to find any possibility to show (and to manage, of course) on the Collection WorkList, not only open items already registered in FI-AR, but also any notification registered under the QM module, bearing in mind that it is not an open item, yet.
Is there any possibility?
Thanks in advance.in short the answer is no.
You could look at customer disputed objects and using them, but you would need to re-key the data, there is no standard way of transfering data from QM to create a dispute. -
There is no connection between apple tv and the remote
i am trying to use the remote control but i dont know if its work or not because the light in apple tv is blinking but no respond from it ?????
what should i do???here i can supply more details: when i deinstall quicktime only, reboot, and reinstall quicktime from a previously downloaded file, everything works as expected, that is, i can click on an offer within quicktime and in turn itunes will open and will offer that item. - but this will function only about ten times, after that, the error message reported above will block access to any item offered on quicktime.- could this be a virus ? (f-secure and security essentials did not report anything) or could this be a commercial barrier ?
-
Connection between GP WebDynpro and the KM functionality
Hi All,
how can I get access to the KM API in a GP Web Dynpro form.
NWDS doesnt show an Error in delepment mode.
But when Im trying to Build the Application I got the following Error message:
[javac] Compiling 22 source files to C:Documents and Settingstfelp4.dtcLocalDevelopmenttA205D007106BD3F4B0582807B7EAB411classes
[javac] C:Documents and Settingstfelp4.dtcLocalDevelopmenttA205D007106BD3F4B0582807B7EAB411gen_wdppackagescomcaselisagpWDCEWRFormView.java:24: package com.sapportals.wcm.util.uri does not exist
[javac] import com.sapportals.wcm.util.uri.RID;
[javac] ^
[javac] C:Documents and Settingstfelp4.dtcLocalDevelopmenttA205D007106BD3F4B0582807B7EAB411gen_wdppackagescomcaselisagpWDCEWRFormView.java:173: cannot resolve symbol
[javac] symbol : class RID
[javac] location: class com.cas.elisa.gp.WDCEWRFormView
[javac] RID aRid = null;//RID.getRID("/documents/CCElectronics Content/NewAge/EWR");
Classpath is set...
The same coding works in a normal Web Dynpro form without GP interface.
Hope someone can help me...
Thanks in advance
SteveSolved!
It appeared to be a "long" parameter and I was trying to put it in a "Number" parameter in Flex (because there is no long in Flex)
When I changed both to String, it worked! -
Connection between Oracle 9i and MS Sql Server 2005
Hey Guys,
I am hoping to create materialized view of data on a small sql server box using our oralce 9i cluster. Anyway, i have done this with mysql using the standard odbc dirvers and a dblink, but i am having trouble finding an odbc driver for the connection from oracle to sql server. So, i was wondering if you guys know of a free, or cheap odbc driver, or have a suggestion of an alternative connection method.
PS: i have see: Heterogeneous Services Agents and Transparent gateways floating around, so are these options that don't need the odbc drivers and are free?
Thanks in advanceSome links
http://www.google.lv/search?hl=lv&q=oracle+sql+server+difference&meta=
http://asktom.oracle.com/pls/asktom/f?p=100:1:487512552646613::NO:RP::
http://www.mssqlcity.com/Articles/Compare/sql_server_vs_oracle.htm
http://www.wisdomforce.com/dweb/resources/docs/MSSQL2005_ORACLE10g_compare.pdf
But you have to remember one big thing - I've not seen yet one compare that was completely indifferent to any of the included DB's. So you can be sure that every doc that you get on MS website will say that SQL server is better, every doc on Oracle website will say that Oracle is better. Every doc on other websites will say that better DB either is:
1) DB that has payed for the reserach paper
2) DB that was mostly used by the researchers
So of course you should be very cautious about each paper you get.
Gints Plivna
http://www.gplivna.eu
Maybe you are looking for
-
How can I find a PDF plug in for Firefox 5 running on Mac OSX (10.6)
I recently installed an Update and received a message that my PDF Plug In for Firefox would be disabled, but that when the Update had been installed the Plug in would be enabled. This has not happened. I am running Firefox 5 on Mac OSX (10.6)
-
Is there a way to select more than one file in a dialog box
I want to select multiple files in the dialog box and get all the file names I selected, is there any way to do this?
-
Trade mark sign appears when trying @ setting up macair
setting up macbookair. can not do @. tm appears instead
-
Macbook Pro Retina's screen with a lot of issues (big vertical lines)
I discovered recently that my MacBook Pro Retina have a lot of strange verticales lines on the screen. Not visible in current usage, but when I switch to dashboard and his black background sreen I can clearly see those issues. Anyone get this problem
-
I need a download for OS 10.10 for my EOS cameras
I uploaded Yosemite OS 10.10 and can't download pix from my 60D or Rebel. I downloaded the Apple update, but still get the message ALERT Cannot be used with this version of the operating system. Is there a fix? It also doesn't not recognize either